Att 1 - DRAFT J-1 P-TSV Specification 12_11_23.pdf

PACIFIC TRAINING SUPPORT VESSEL (P-TSV) 5

SPECIFICATION

11 DECEMBER 2023 10

ATTACHMENT J-1

DEPARTMENT OF THE NAVY

PROGRAM EXECUTIVE OFFICE, UNCREWED AND SMALL

COMBATANTS

WASHINGTON, DC 20376 30

PACIFIC TRAINING SUPPORT VESSEL SPECIFICATION - DRAFT

ii

TECHNICAL AUTHORITY APPROVAL:

_______________________________________ Date: ________

Mr. Carey J. Filling

Chief Systems Engineer (Ships)

(NAVSEA 05D) 10

PROGRAMMATIC AUTHORITY APPROVAL: 15

_______________________________________ Date: ________ Mr. Peter Herrman 20

Assistant Program Manager

FMS Boats and Craft

(PMS300)

iii

Revision History

Revision Date Pages Description

Draft 12/11/2023 All Initial draft issue

TABLE OF CONTENTS 1

1.000 SCOPE .................................................................................................................................5 2

2.000 DOCUMENTS .....................................................................................................................5 3

2.100 GOVERNMENT DOCUMENTS ........................................................................................6 4

2.200 NON-GOVERNMENT STANDARDS AND REFERENCES ...........................................6 5

2.300 DEFINITIONS .....................................................................................................................6 6

2.400 ACRONYMS AND ABBREVIATIONS ............................................................................8 7

3.000 REQUIREMENTS FOR THE OSV PRIOR TO CONVERSION ......................................9 8

3.070 GENERAL REQUIREMENTS FOR THE OSV ................................................................9 9

4.000 REQUIREMENTS FOR REACTIVATION OF THE OSV .............................................10 10

4.070 GENERAL .........................................................................................................................10 11

4.096 PRE-CONVERSION WEIGHTS ......................................................................................10 12

5.000 REQUIREMENTS FOR THE CONVERSION OF THE OSV ........................................11 13

5.070 GENERAL REQUIRMENTS FOR DESIGN AND CONSTRUCTION .........................11 14

5.070a. GENERAL ........................................................................................................................11 15

5.070b. ............................................................................................................... REGULATORY BODY 16

REQUIREMENTS .............................................................................................................11 17

5.070c. CHARACTERISTICS ......................................................................................................12 18

5.070d

CERTIFICATIONS ...........................................................................................................13 20

5.070e. OPERATING ENVIRONMENT......................................................................................13 21

5.070f. GENERAL REQUIREMENTS FOR EQUIPMENT, MACHINERY, AND 22

MATERIALS .....................................................................................................................13 23

5.070g

WORKMANSHIP .............................................................................................................14 25

5.070h

SEAKEEPING ...................................................................................................................14 27

5.071 ACCESS ..............................................................................................................................15 28

5.077 ENVIRONMENTAL, SAFETY, AND OCCUPATIONAL HEALTH ............................16 29

5.079 STABILITY .......................................................................................................................17 30

5.091 RELIABILITY, MAINTAINABILITY, AND AVAILABILITY ....................................18 31

5.096 LIST, TRIM, AND WEIGHTS ...........................................................................................18 32

5.100 GENERAL REQUIREMENTS FOR HULL STRUCTURE ............................................19 33

5.123 TANKS ................................................................................................................................20 34

5.167 HULL STRUCTURAL CLOSURES ................................................................................20 35

5.167a. MANHOLES ....................................................................................................................20 36

5.170 MAST ................................................................................................................................20 37

5.259 EXHAUST SYSTEM ........................................................................................................21 38

5.320 LIGHTING AND POWER DISTRIBUTION ...................................................................21 39

5.320a. WORKING DECK LIGHTING ........................................................................................21 40

5.320b. ......................................................................................................................... WORKING DECK 1

RECEPTACLES ................................................................................................................21 2

5.320c. POWER DISTRIBUTION INSTALLATION ON BRIDGE ............................................22 3

5.320d. ........................................................................................................................... SHORE POWER 4

STATION ..........................................................................................................................22 5

5.405 ANTENNAS ......................................................................................................................23 6

5.407 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E3) .......................................23 7

5.422 NAVIGATION LIGHTS, SIGNAL LIGHTS, AND SEARCHLIGHTS .........................25 8

5.423 TACTICAL AIR NAVIGATION SYSTEM .....................................................................25 9

5.424 VESSEL'S ELECTRONIC NAVIGATION SYSTEMS AIDS ........................................25 10

5.432 DIAL TELEPHONE SYSTEM .........................................................................................26 11

5.435 LOCAL AREA NETWORK (LAN) .................................................................................27 12

5.435a NETWORK CABLES .......................................................................................................28 13

5.435b WIRELESS LOCAL AREA NETWORK .........................................................................29 14

5.436 INTRUSION DETECTION SYSTEM ..............................................................................29 15

5.439 MISSION AND SECURITY MONITORING SYSTEMS ...............................................30 16

5.441 RADIO COMMUNICATION SYSTEM ..........................................................................31 17

5.441a EQUIPMENT ...................................................................................................................31 18

5.441b RADIO ROOM ................................................................................................................31 19

5.441c TRAINING OPERATIONS CENTER ..............................................................................32 20

5.512 HEATING, VENTILATION, AND AIR CONDITIONING ............................................33 21

5.512a DESIGN CRITERIA ..........................................................................................................33 22

5.512b GENERAL .........................................................................................................................33 23

5.514 AIR CONDITIONING MACHINERY .............................................................................34 24

5.516 REFRIGERATION SYSTEM ...........................................................................................34 25

5.521 SEAWATER SERVICE SYSTEM ...................................................................................34 26

5.532 FRESHWATER SERVICE SYSTEM ..............................................................................35 27

5.541 SMALL BOAT REFUELING SYSTEM ..........................................................................35 28

5.551 COMPRESSED AIR SYSTEM .........................................................................................36 29

5.583 LIFESAVING APPLIANCES ...........................................................................................36 30

5.589 DECK CRANE & FOUNDATION ...................................................................................36 31

5.590 REMOVAL OF EQUIPMENT RELATED TO OSV CLASS NOTATIONS ..................37 32

5.593 POLLUTION CONTROL SYSTEMS ..............................................................................37 33

5.602 HULL DESIGNATION AND MARKING .......................................................................37 34

5.611 HULL FITTINGS ..............................................................................................................39 35

5.612 RAILS AND STANCHIONS ............................................................................................39 36

5.621 NON-STRUCTURAL BULKHEADS ..............................................................................39 37

5.622 VESSEL’S BROW ............................................................................................................39 38

5.631 PAINTING AND COATINGS ..........................................................................................39 39

5.631a. GENERAL ........................................................................................................................40 40

5.631b

LIMITATIONS ..................................................................................................................40 2

5.631c. SURFACE PREPARATION ............................................................................................40 3

5.631d

APPLICATION .................................................................................................................41 5

5.633 CATHODIC PROTECTION .............................................................................................41 6

5.640 REQUIREMENTS FOR LIVING, MESSING, LOUNGE AND LEISURE SPACES ....41 7

5.651 FOOD SERVICE SPACES ...............................................................................................43 8

5.652 HOSPITAL ROOM .............................................................................................................44 9

5.654 CLEANING GEAR LOCKER ..........................................................................................44 10

5.655 LAUNDRY ........................................................................................................................44 11

5.663 PILOTHOUSE, CHART AREA, AND MACHINERY CONTROL STATION 12

FURNISHINGS .................................................................................................................44 13

5.664 DAMAGE CONTROL EQUIPMENT ..............................................................................45 14

5.672 STOREROOMS .................................................................................................................45 15

5.700 ORDNANCE GROUNDS ...................................................................................................48 16

5.713 MAGAZINES ......................................................................................................................48 17

6.000 VERIFICATION................................................................................................................48 18

6.070 GENERAL .........................................................................................................................48 19

6.071 ACCESS .............................................................................................................................49 20

6.079 STABILITY .......................................................................................................................49 21

6.091 RELIABILITY, MAINTAINABILITY, AND AVAILABILITY ......................................49 22

6.094 TRIALS..............................................................................................................................49 23

6.096 LIST, TRIM, AND WEIGHTS ...........................................................................................50 24

6.100 GENERAL REQUIREMENTS FOR HULL STRUCTURE ............................................50 25

6.172 INSTALL ANTENNA FRAME ON PILOTHOUSE TOP ...............................................50 26

6.233 DIESEL ENGINES ............................................................................................................50 27

6.320 LIGHTING AND POWER DISTRIBUTION ...................................................................50 28

6.424 SHIP'S ELECTRONIC NAVIGATION SYSTEMS AIDS ..............................................50 29

6.432 INTERIOR COMMUNICATIONS SYSTEM ..................................................................50 30

6.512 HEATING, VENTILATION AND AIR CONDITIONING ...............................................50 31

6.514 AIR CONDITIONNG MACHINERY ................................................................................50 32

6.516 REFRIGERATION SYSTEMS ...........................................................................................51 33

6.532 FRESHWATER SERVICE SYSTEM ..............................................................................51 34

6.541 FUEL SYSTEM .................................................................................................................51 35

6.544 MODIFICATION OF LIQUID MUD TANKS .................................................................51 36

6.551 COMPRESSED AIR SYSTEM .........................................................................................51 37

6.593 POLLUTION CONTROL SYSTEMS ..............................................................................51 38

6.602 HULL DESIGNATION AND MARKING .......................................................................51 39

6.612 RAILS AND STANCHIONS ............................................................................................52 40

6.631 PAINTING .........................................................................................................................52 41

6.633 CATHODIC PROTECTION .............................................................................................52 1

6.640 REQUIREMENTS FOR LIVING, MESSING, LOUNGE AND LEISURE SPACES ....52 2

6.651 FOOD SERVICE SPACES ...............................................................................................52 3

6.654 CLEANING GEAR LOCKER ..........................................................................................52 4

6.655 LAUNDRY ........................................................................................................................52 5

6.663 PILOTHOUSE, CHART AREA, AND MACHINERY CONTROL STATION 6

FURNISHINGS .................................................................................................................52 7

6.664 DAMAGE CONTROL EQUIPMENT ..............................................................................52 8

6.672 STOREROOMS .................................................................................................................52 9

6.589 DECK CRANE & FOUNDATION ...................................................................................52 10

LIST OF TABLES 14

Table 3.070c-1: Characteristics of the OSV Prior to Conversion ................................................. 10 16

Table 5.070c-1: Characteristics of Converted Vessel ................................................................... 12 17

Table 5.407-1 External Electromagnetic Environment (EME) .................................................. 24 18

Table 5.345a-1: Unclassified Inter-Compartment Cabling List ................................................... 27 19

Table 5.345a-2: Classified Inter-Compartment Cabling List ....................................................... 28 20

Table 5.441b-1: Radio Room Furniture List................................................................................. 32 21

Table 5.441c-1: Training Operations Center Furniture List ......................................................... 33 22

Table 5.672b-1: Food Service Store Volumes .............................................................................. 47 23

1.000 SCOPE 1

This Specification defines the requirements for the Pacific Training Support Vessel (P-2

TSV). The P-TSV will be an existing ship, classification society certified, offshore supply vessel 3

(OSV) converted for use as a U.S. Navy training support vessel via the requirements specified 4 herein. The scope of this Specification is to provide the pre-conversion vessel requirements and 5 conversion works to accomplish delivery of the vessel ready for service as a U.S. Navy training 6 support vessel. 7

The Contractor shall provide a suitable OSV for the conversion works that meets the 8 general principal characteristics and requirements of this Specification. 9

The Contractor shall convert the OSV in accordance with the requirements of this 10

Specification. The major conversion works includes the following: 11

a. The conversion of any existing liquid mud tanks to ballast water tanks, fuel tanks, or 12 voids and the removal of any existing bulk mud tanks. 13

b. The design, installation, and certification of a Contractor furnished, knuckle boom, 14 deck crane. 15

c. The design and installation of superstructure modifications to meet accommodation, 16 outfitting, and secure space requirements as needed 17

d. Installation of deck sockets for the installation of various GFE mission equipment. 18

e. Installation of C5I mast, cabling, equipment foundations, and secure spaces. 19

The Contractor shall complete all conversion works for delivery of the vessel with an 21

International Load Line Certificate valid for 5 years. The contractor shall obtain the services of 22

ABS, coordinate all required inspections, and perform any resulting required repairs. The 23

Contractor shall submit to ABS all drawings necessary for review and approval in order to obtain 24 an International Load Line assignment. The vessel shall be delivered with an ABS Classification 25 certificate in accordance with the requirements of this Specification. 26

After the completion of all conversion work, the US NAVY will take ownership of the 27 vessel and operate it as a government owned, Public Vessel. The vessel will enter into service as 28 a U.S. Navy training support vessel. 29

2.000 DOCUMENTS 31

The following standards and documents are specified in this Specification. While every 32 effort was made to ensure the completeness of this list, the Contractor is required to meet all 33 specified requirements documents cited in this Specification, whether or not they are listed in 34 this section. Compliance with referenced documents is mandatory even where the referenced 35 document may use terms similar to “recommendation”, “guideline”, or “guidance” in their title 36 or text. 37

Order of precedence - In the event of a conflict between the text of this document and the 38 references (other than Regulatory Body requirements) cited in this document, the text of this 39 document takes precedence. First tier references take precedence over sub-tier references in the 40 event of a conflict. Nothing in this document shall supersede applicable laws and regulations 41 unless a specific exemption has been obtained. 42

Silence of one document with respect to details or requirements in another document shall 43 not be considered an inconsistency. 44

Effective issue - Where first tier references, such as industry standards, are referred to, the 45 issue or revision/amendment in effect at Contract Award shall apply. 46

First Tier and Sub-tier Reference - Any referenced document that is directly cited for use 1 or application by an identifying number or name in this Specification is a first tier reference for 2 each particular use or application for which it is so cited. Any document that is cited in a first tier 3 reference, or in a document referenced therein, is a sub tier reference. A document that is a sub-tier 4 reference in one application may also be a first tier reference in another application when it is cited 5 directly. 6

2.100 GOVERNMENT DOCUMENTS 8

2.100a. P-TSV CONVERSION REFERENCE DRAWINGS 10

2.100b. OTHER GOVERNMENT DOCUMENTS 12

1. 46 USC Chapter 51 “Load Lines” 13

2. 46 CFR Parts 41-47, “Load Lines” 14

3. 46 CFR Subchapter L Offshore Supply Vessels 15

4. 46 CFR Subchapter S (parts 170-174) 16

5. NSTM Chapter 505 Piping Systems 17

6. NSTM Chapter 589 Cranes 18

7. NSTM Chapter 700 Shipboard Ammunition Handling and Stowage 19

8. MIL-A-18001 K Anodes Sacrificial Zinc Alloy 20

9. MIL-STD-419 LEVEL 6 Cleaning, Protecting, and Testing Piping, Tubing and Fittings for 21

Hydraulic Power Transmission Equipment 22

10. MIL-DTL-16884 Fuel Naval Distillate 23

2.200 NON-GOVERNMENT STANDARDS AND REFERENCES 25

1. ABS Rules for Building and Classing Offshore Support Vessels 26

2. ABS Guide for Lay-up and Reactivation of Offshore Support Vessels 27

3. ABS Guide for Certification of Lifting Appliances 28

4. ABS Guide for Dynamic Positioning Systems 29

5. American Society for Testing Materials (ASTM) 30

6. API Specification 2C Specification for Offshore Pedestal Mounted Cranes 31

7. Diesel Fuel Marine (NATO) Code F-76 32

8. IEEE Std 45-2002 Recommended Practice for Electrical Installation on Shipboard 33

9. International Load Line Convention (1966) as amended by the IMO 1988 34

10. ISO Standard 4406.2017 Code 17/15/13 Cleanliness Requirements for Hydraulic Oil 35

11. ISO Standard 8217 Specifications of Marine Fuels 36

12. MARPOL 73/78 International Convention for Prevention 37

13. SAE J429 Mechanical and Material Requirements for Externally Threaded Fasteners 38

14. SNAME T&R Bulletin No. 3-39, 2018 39

15. SNAME T&R Bulletin No. 3-47, 2015 40

16. Steel Structures Painting Council Surface Preparation Specifications (SSPC-SP) 41

2.300 DEFINITIONS 43

Accommodations: The facilities provided to support the people on board the vessel 44 including sleeping, recreation, sanitary, medical, food service and office spaces. 45

Approve: The terms ’as approved,’ ’to approve’, ‘approved’, ’as required’, and 1

’required’ mean the approval by, the requirements of, or the selection of the Government. 2

Additionally, the terms ’approved’ and ’required’ may also mean approved or required by a 3

Regulatory Agency or Regulatory Body. Wherever these terms are used without further 4 qualification, it is the approval, decision, or direction of the Government or Regulatory Bodies, as 5 appropriate that is required. 6

Approximate: Where the term “approximate” or “approximately” is used, it means that 7 delivered performance, parameter, or characteristics shall be within 10% of the specified value, 8 except where an upper or lower bound on the specified value is provided. 9

Contractor: The firm that holds the prime contract with the Government for procurement 10 and conversion of the vessel. 11

Deck toilet: Deck toilets shall consist of a toilet and wash basin. 12

Dedicated: When used to describe a space, dedicated means that the space serves a 13 single purpose and does not contain any outfitting, equipment, and controls which do not serve 14 the purpose of that space. When used to describe systems or equipment, dedicated means that 15 the item serves a single purpose. 16

Government: The United States Government, and the Owner of the vessel. 17

Government Furnished Information (GFI): Information essential for the installation, 18 test, operation, and interface support of all Government Furnished Material. 19

Guidance: A referenced document identified herein as “guidance” does not necessarily 20 provide, nor is it intended that it provide all features and details of the system, subsystems, and 21 equipment to which it relates. It serves the purpose of providing information and guidance 22 which, when utilized in conjunction with applicable specification requirements, may assist in the 23 design and construction of the vessel. Reference documents identified herein as “guidance” are 24 furnished without warranty or representation as to their accuracy, completeness, or suitability for 25 use. 26

Herein: Wherever the term "herein" is used, it is intended to mean in any section of 27 these Specifications, including Appendices. 28

Installed, Furnished, Fitted, or Provided: The Contractor shall procure, install, 29 inspect, and perform other work necessary to ensure systems, subsystems, equipment, and their 30 support systems and structure are capable of performing their intended function, as appropriate, 31 unless otherwise specified. 32

Living spaces: Spaces whose primary function are the health and comfort of the crew. 33

Machinery space: Spaces classified as machinery spaces by the Regulatory Bodies, 34 steering gear compartments, shaft alleys, pump rooms, motor rooms, thruster machinery rooms, 35 and spaces containing sewage, oil, and solid waste transfer and processing equipment. 36

Or equal: Equipment, machinery, or an item of material that performs the same function 37 as one named by the manufacturer or trade designation is of similar quality and construction. 38

Specifications: This Specification for the design, conversion, testing, and commissioning 39 of the vessel. 40

Authorized NAVSEA Representative: The person or persons acting under the authority 41 of the Government Contracting Officer. Representative’s duties will be to accept technical 42 information and determine its completeness or correctness for the Government Contracting 43

Officer. 44

Regulatory Body: Includes Governmental agencies such as United States Coast Guard 45

(USCG), Centers for Disease Control and Prevention, Federal Communication Commission (FCC) 46 or designated third parties (such as ABS) that are authorized to act on their behalf that have Federal 1 regulations applicable to the design or construction of public vessels. In addition, includes non-2 governmental agencies (such as ABS), International Maritime Organization (IMO), International 3

Convention for the Prevention of Pollution from Ships (MARPOL), IMO International Convention 4 for the Safety of Life at Sea (SOLAS), and IMO Convention on the International Regulations for 5

Preventing Collisions at Sea, 1972 (COLREG) for international voyages. 6

Shall be provided: Means the item or service is to be provided by the Contractor. 7

Will be provided: Means the material, equipment, or information will be provided to the 8

Contractor by the Government. 9

2.400 ACRONYMS AND ABBREVIATIONS 11

ABS American Bureau of Shipping 12

ACAD AutoCAD 13

ACS Aft Control Station 14

AFFF Aqueous Film-Forming Foam Concentrates 15

AIS Automatic Identification System 16

AMS ABS Notation for vessel machinery, boilers, and systems 17

ANSI American National Standards Institute 18

API American Petroleum Institute 19

APS ABS Notation for self-propelled vessel with athwartship thrusters 20

ASTM American Society for Testing and Materials 21

AUTEC Atlantic Undersea Testing and Evaluation Center 22

CCTV Closed circuit Television 23

COLREG International Regulations for Preventing Collisions at Sea 24

CRC Crane Register Certification 25

CRES Corrosion Resistant 26

DGPS Differential Global Positioning System 27

DPS Dynamic positioning System 28

DSC Digital Selective Calling 29

ECDIS Electronic Chart Display and Information System 30

EPIRB Emergency Position Indication Radio beacon 31

FFV Fire Fighting Vessel 32

GFE Government Furnished Equipment 33

GMDSS Global Maritime Distress and Safety System 34

HF High frequency 35

IEEE Institute of Electrical and Electronic Engineers 36

IMO International Maritime Organization 37

ISO International Standards Organization 38

ITC International Tonnage Convention 39

JIC Joint Industry Council 40

MARPOL International Convention for the Prevention of Pollution from Ships 41

MCR Maximum Continuous Rating 42

MSD Marine Sanitary Device 43

NATO North Atlantic Treaty Organization 44

NAVSEA Naval Sea Systems Command 45

NDT Nondestructive Testing 46

NGA National Geospatial-Intelligence Agency 1

NPT National Pipe Taper 2

NSTM Naval Ships Technical Manual 3

OSHA Occupational Safety and Health Administration 4

OSR Oil Spill Response 5

OSV Offshore Supply Vessel 6

PA/GA Public Address and General Alarm 7

PVCP Portable Vessel Control Pendant 8

RRS Ramp Recovery System 9

RX Receive 10

SCBA Self Contained Breathing Apparatus 11

SNAME Society of Naval Architects and Marine Engineers 12

SOLAS Safety of Life at Sea 13

SS Stainless Steel 14

SSCC Stainless Steel Control Console 15

SSPC-SP Steel Structures Painting Council Surface Preparation Specifications 16

SSR Safety Stand-by Service 17

STO Service Thermoplastic Oil Resistant 18

SWL Safe Working Load 19

TOW Towing 20

TTL Telescopic Target Launcher 21

TTLS Telescopic Target Launching System 22

TX Transmit 23

USCG United States Coast Guard 24

UWILD Underwater Inspection in Lieu of Dry Docking 25

VDC Volts DC 26

VHF Very High Frequency 27

WHE Weight Handling Equipment 28

3.000 REQUIREMENTS FOR THE OSV PRIOR TO CONVERSION 30

3.070 GENERAL REQUIREMENTS FOR THE OSV 32

3.070a. GENERAL 34 The OSV procured shall have been newly constructed and delivered after January 1, 2009. 35

OSVs with soft coatings in saltwater ballast tanks are not acceptable. 36

The OSV shall have fixed pitch propellers. OSVs with Z-drives as their main propulsors 37 are acceptable. 38

3.070b. REGULATORY BODY REQUIREMENTS 40 The OSV supplied by the Contractor shall be U.S. Flagged and classed under ABS as A1, 41

Offshore Support Vessel, Ⓔ, AMS, and DPS-1 or greater prior to any conversion work. 42

The OSV procured shall have been designed and built in accordance with and complied 43 with all Statutory Regulations listed below: 44

1. US Regulatory Tonnage 45

2. International Convention for the Prevention of Pollution from Ships (MARPOL) 1

73/78, all applicable Annexes. 2

3. 46 CFR Subchapter L Offshore Supply Vessels 3

4. International Load Line Convention 1966 4

5. International Tonnage Convention 1969 5

6. International Regulations for Preventing Collisions at Sea, 1972 (COLREG). 6

7. International Convention for Safety of Life at Sea (SOLAS), all applicable 7

Amendments and including Resolution MSC.235(82), Adoption of the Guidelines for 8 the Design and Construction of Offshore Supply Vessel, 2006. 9

3.070c. CHARACTERISTICS 11 The OSV procured shall comply with the characteristics described in Table 3.070c-1 below 12 prior to any conversion work. 13

Table 3.070c-1: Characteristics of the OSV Prior to Conversion 15

Characteristic Requirement

Minimum Length Overall 230 feet

Maximum Length Overall 285 feet

Minimum Beam 42 feet

Maximum Beam 68 feet

Maximum Full Load Draft 20 feet

Minimum Deck Cargo Load Capacity 250 long tons

Minimum Speed at 85% of Max Continuous Rating 10 knots

4.000 REQUIREMENTS FOR REACTIVATION OF THE OSV 17

The OSV supplied for conversion, if currently laid-up, shall be reactivated in accordance 19 with the ABS Guide for Lay-up and Reactivation of Offshore Support Vessels. 20

Additionally, the inspection and overhaul requirements of Attachment J-6, Maintenance 21

Statement of Work (SOW) shall be completed. 22

4.070 GENERAL 23

4.070a. GENERAL 25 The OSV supplied for conversion, if currently laid-up, shall be reactivated in accordance 26 with the ABS Guide for Lay-up and Reactivation of Offshore Support Vessels. 27

4.070b. CERTIFICATIONS 29 Upon the completion of the reactivation, the vessel shall be certified by ABS as having 30 been reactivated in accordance with the ABS Guide for Lay-up and Reactivation of Offshore 31

Support Vessels. 32

4.096 PRE-CONVERSION WEIGHTS 34

The Contractor shall provide a pre-conversion Preliminary Allocated Baseline Weight 35

Estimate (PABWE). The PABWE shall be the Contractor's pre-conversion weight estimate and 36 centers (vertical, longitudinal, and traverse) of the Contractor’s supplied OSV prior to the 37 conversion works. The PABWE shall be based on the existing OSV weight estimate and centers 38 of gravity and the Contractor’s projected weight removals and additions for the conversion 1 works. The PABWE shall conform to the requirements of the Society of Allied Weight 2

Engineers (SAWE) Recommended Practice M-1 Weight Control Technical Requirements for 3

Naval Surface Ships, and include estimated values for design and building margin, and contain 4 contract modification and GFM margins, as specified. 5

Variable loads shall be distributed throughout the vessel in their appropriate spaces. The 6

Contractor shall include appendices the following information: 7

a) Historical back up data for estimating factors that were used in the development of the 8

PABWE, such as mill tolerance, paint, weld material, insulation, and so forth. 9

a) The technical analysis that substantiates the values proposed for design and building 10 margin. 11

b) A summary of Government Furnished Material, as reported in the details of the PABWE. 12

5.000 REQUIREMENTS FOR THE CONVERSION OF THE OSV 14

5.070 GENERAL REQUIRMENTS FOR DESIGN AND CONSTRUCTION 16

5.070a. GENERAL 18

The Training Support Vessel (TSV) shall be capable of operating in open-ocean in high sea 19 states, day or night, in weather in support of fleet training requirements and fleet exercise 20 objectives. The vessel shall be capable of performing the following task: 21

a) Launch, recovery, and towing of small boats up to 11m long and weighing up to 22

20,000 lbs. 23

b) Deployment, recovery, and servicing of autonomous underwater vehicles (AUVs). 24

c) Deployment, recovery, and servicing of aerial targets (drones/sub-sonic missile 25 targets) including BQM-177A. 26

d) Recovery of inert training torpedoes. 27

e) Ability to transmit data to and from U.S. Navy shore stations, satellites, other ships 28 and platforms. 29

f) Long periods of operation (up to 30 days) in a combination of transiting, low speed 30 operations, and on-station tasking. 31

5.070b. REGULATORY BODY REQUIREMENTS 33

All modifications to the procured OSV to meet the requirements of the conversion works 34 and specifications herein shall be in accordance with ABS Rules, Notations, and Guides. 35

The vessel, once converted by the Contractor, shall be classed under ABS as A1, 36

GOVERNMENT SPECIAL PURPOSE, Ⓔ, AMS, DPS-1 or greater, and UWILD. All class 37 surveys and special surveys due within a year after delivery of the vessel shall be completed. 38

Any class surveys and special surveys that allow for early completion within a year after delivery 39 of the vessel shall also be completed. 40

The Contractor shall provide all drawings, plans, technical documentation, and 41 technical/logistical data for ABS review and approval of the vessel’s design to meet the 42 requirements of the conversion works and specifications herein. 43

The vessel shall be issued certificates of compliance for International Convention for the 1

Prevention of Pollution from Ships (MARPOL), International Convention for the Safety of Life 2 at Sea (SOLAS), and Convention on the International Regulations for Preventing Collisions at 3

Sea, 1972 (COLREGs) for international voyages by a U.S. Government Public Vessel. The 4 vessel shall be delivered with an International Load Line Certificate. 5

If any certificates of compliance under international, U.S. Federal, State, and municipal 6 laws or regulations cannot be issued because the vessel is a Public Vessel, an ABS Statement of 7

Voluntary Compliance shall be issued instead. 8

The Contractor shall not obtain a USCG Certificate of Inspection for the vessel. 9

5.070c. CHARACTERISTICS 10

The vessel shall be capable of maintaining a sustained speed of at least 10 knots and 11 capable of an unrefueled 5,000 nautical mile range. The sustained speed shall be specified at 12

85% of ABS Maximum Continuous Rating (MCR) of the propulsion prime movers at trial 13 conditions, with the vessel at full load displacement in calm water (no current, wind or waves), 14 and with a clean hull and propulsors. 15

The aft deck shall allow for boat launch and recovery operations over each side. 16

The aft working deck shall have a clear open, continuous, coplanar, rectangular area with a 17 minimum area of 3,800 square feet. The aft working deck shall have a minimum length of 110 feet 18 and a minimum width of 38 feet after all conversion works have been completed by the Contractor. 19

The aft working deck shall be clear of all equipment. Areas in way of removable bulkheads shall 20 not have a maximum deck protrusion height taller than 2 in. 21

The converted vessel shall maintain all the characteristics listed in Table 3.070c-1 and 22 comply with those listed below in Table 5.070c-1. 23

Table 5.070c-1: Characteristics of Converted Vessel 25

Characteristic Requirement

Minimum Clear Working Deck Area 110 feet long by 38 feet wide.

Minimum Dry Stores Volume 310 cubic feet.

Minimum Refrigerated Stores Volume 350 cubic feet.

Minimum Freezer Stores Volume 280 cubic feet.

Bridge Arrangement Forward and aft vessel control and navigation stations.

Main Engine Arrangement Conventional twin diesel engines, diesel electric, or Z-Drive arrangement.

Generator Arrangement

Each generator shall have paralleling capability and be able to accommodate the full ship’s load plus an additional 300kW for

Government Furnished Equipment (GFE).

Minimum Potable Water Making Capacity and

Arrangement

Minimum capacity of 1,800 gallons per day

Total Personnel Capacity 28 total, including crew

Accommodations Arrangement 28 berths total, including crew...

All propulsion, electrical generating and auxiliary machinery shall be capable of continuous 1 operation using diesel fuel in accordance with ASTM D975, Grade 2-D; International Standards 2

Organization (ISO) 8217, F-DMA; and Diesel Fuel Marine (North Atlantic Treaty Organization 3

(NATO) Code F-76) in accordance with MIL-DTL-16884. 4

5.070d. CERTIFICATIONS 6

The following certificates shall be provided to the vessel, at the time of delivery, as 7 applicable for this category and size of the vessel: 8

1. Certificates required by ABS Classification and Flag State Authority. 9

2. International Convention for the Safety of Life at Sea (SOLAS) (ABS Statement of 10

Voluntary Compliance). 11

3. International Convention for the Prevention of Pollution from Ships (MARPOL) 12

(ABS Statement of Voluntary Compliance). 13

4. Convention on the International Regulations for Preventing Collisions at Sea, 1972 14

COLREGs for international voyages (ABS Statement of Voluntary Compliance). 15

5. IMO International Convention on Load Lines, 1966. 16

6. Load test certificate for all non-GFE lifting and lashing equipment including 17 overhead beams and lugs. 18

7. Magnetic compass calibration and other navigational certificates required by Flag 19

State Authority. 20

8. Lien Free Certificate 21

9. U.S. Tonnage Certificate issues by Flag State Authority in accordance with 22

International Convention on Tonnage Measurement on Ships, 1969 (re-admeasured to 23 account for conversion works) 24

10. International Radio Communication Regulations 25

11. FCC Regulations for Global Maritime Distress Safety System (GMDSS) for Sea Area 26

3. 27

12. The vessel shall be equipped to satisfy Panama Canal transit regulation. The 28

Contractor shall obtain and provide a Panama Canal Tonnage Certificate for the 29 vessel. 30

No Certificate of Inspection will be issued. 32

5.070e. OPERATING ENVIRONMENT 34

The vessel shall be designed to be operated, as required, on any ocean. The Government 35 intends to operate the vessels 100 nautical miles offshore with occasional operations up to 1,000 36 nautical miles offshore. The TSV operating area will be in the Pacific Ocean, extending as far 37 south as Australia and as far north as the Gulf of Alaska. 38

At a minimum, the vessel and its systems shall retain full capabilities within a seawater 40 temperature range of 28o F to 95o F and a weather ambient air temperature range of 35o F to 105o 41

F dry bulb and 82o F wet bulb. 42

5.070f. GENERAL REQUIREMENTS FOR EQUIPMENT, MACHINERY, AND 44

MATERIALS 45

All Contractor provided equipment, machinery, and material shall be commercial 1 marine grade unless specified herein. 2

All new equipment, machinery, and material shall be integrated into the procured 3

OSV equipment and systems in form, fit, and function to meet the requirements of the 4 conversion works and specifications herein, shall be purchased new, and shall be 5 protected and handled to maintain such condition prior to and after installation. 6

Voltage warning and danger signs shall be installed in spaces where personnel 7 are exposed to energized equipment 480 volts AC or higher. 8

All hazard identification and labeling signs shall be displayed for applicable 9 standing and seating positions in accordance with ASTM F1166. 10

Unless otherwise noted, designations, numbering, labeling, nameplates, notices 11 and markings shall be in accordance with best commercial marine practices. 12

The vessel shall be provided with fixed eyewash units in the engine room, near sewage 14 machinery related spaces, near battery charging stations, near workshops, and in a protected area 15 of the working deck aft of the deckhouse. Supply water for eyewash units shall be taken from a 16 cold potable water source at a reduced pressure to meet the flow rates of ANSI Z358.1. 17

5.070g. WORKMANSHIP 19

This section applies to all new work completed by the Contractor as part of the 20 conversion. 21

Inaccessible void spaces, and corners and crevices in which water and dirt may collect or 22 pool shall be eliminated. Drain holes shall be cut and watercourses provided to prevent 23 accumulation and retention of liquids and to permit the free flow to drains, scuppers, sumps, and 24 suction pipes. Drain holes in bottom longitudinal and vertical keel shall be located to ensure 25 drainage of each bay formed by longitudinal and transverse frames. 26

Exposed outside corners or sharp edges of interior bulkheads, joiner bulkheads, coamings 27 and other raised structures, and their stiffeners in accommodation and mission operations spaces 28 shall be rounded to prevent personal injury. 29

All surface coatings, lagging and insulation disturbed during the conversion, including 30 but not limited to paint, deck covering, piping lagging and bulkhead insulation, shall be restored 31 to match the surrounding areas. This includes both sides of steel where welding or burning has 32 occurred. All new steel structure shall be painted to match other steel in the area. All new and 33 modified piping shall be painted to match other piping in the area. 34

5.070h. SEAKEEPING 36

In the support of U.S. Navy fleet training exercises, the P-TSV shall be capable of being 37 fully operational in open ocean and high sea states, day or night, in weather. 38

The ship’s equipment, systems, and personnel shall be fully operable to perform the ship’s 39 mission, at all loading conditions and headings, for speeds 0-12 knots (significant wave height 40

3.25 meters (Sea State 5), wind speed 24.5 knots) meeting the following criteria: 41

a) Vertical accelerations less than 0.2 g (root mean squared (RMS)) at the point furthest 42 from the center of the ship where personnel will be working. 43

b) Lateral accelerations less than 0.1 g (RMS) at the point furthest from the center of the 44 ship where personnel will be working. 45

c) Roll less than 4.0 degrees (RMS). 1

d) Pitch less than 2.0 degrees (RMS). 2

e) Probability of deck wetness less than 5% at all working areas. 3

For the ship’s operational condition of work boat launch and recovery, the following criteria 5 shall be met: 6

a) Sea State 4, significant wave height 1.88 meters. 7

b) Vertical and lateral accelerations less than 0.1 g RMS at the launch and recovery 8 location. 9

c) Roll less than 4.0 degrees RMS and pitch less than 1.25 degrees RMS. 10

d) Probability of deck wetness less than 5% at launch and recovery location. 11

Sea States are defined in North Atlantic Treaty Organization Standardization Agreement (NATO 13

STANAG) No. 4194, Table D-1. The wave spectra for all cases shall be assumed to be short-14 crested Bretschneider. The Ship will be able to survive (maintain primary structural integrity, 15 mobility, and stability) in significant wave height of 5.0 meters with 40 knot wind (Sea State 6) 16 at best heading. 17

The aft working deck crane will be certified for operation in Sea State 4 dynamic load along 18 with a static heel of 5 degrees due to lifting of the load. This requirement shall be met without 19 the necessity of moving ballast water during crane operations. 20

5.071 ACCESS 22

For modification of the procured OSV to meet conversion works requirements and 24 specifications herein, the following access requirements apply: 25

a. Compartments, usable spaces, and voids shall be provided with doors, hatches, scuttles, 26 manholes, arches, and removable plates required to afford the most convenient access 27 without compromising watertight integrity, structural strength, or efficient arrangement. 28

b. Access routes to spaces containing equipment that cannot be readily disassembled into 29 smaller components and/or sized that precludes shipment through a standard access route 30 shall be provided with a means to readily disassemble interferences without hot work. 31

The temporary shipping access route shall be sized to accommodate the largest piece of 32 equipment or subassembly installed in the space. 33

c. Internal and weather passages should have a clear width of not less than 36 inches. 34

d. The clear walkway width for one person in an unrestricted area, where two persons could 35 pass is at least 28 inches. 36

e. The clear walkway width for normal two-way traffic or any means of egress that leads to 37 an exit or entrance is at least 36 inches. 38

f. Passages shall be kept clear of items that restrict this minimum clear width or are a source 39 of danger to personnel. In passages where queues for messing could form, the clear width 40 shall be 54 inches. Headroom in passages, sanitary, accommodation spaces, and working 41 areas shall be 7 feet, unless otherwise specified. Headroom in other spaces shall be a 42 minimum of 6 feet 6 inches. 43

g. Headroom in doors, arches shall be a minimum of 6 feet 6 inches and width shall be 30 44 inches. 45

h. Accommodation area stairs, stair landings, hand grabs, and stair railings and handrails shall 46 be provided in accordance with ASTM F1166. Stairs shall be at a maximum 38° incline 1 and shall have a minimum clear tread width of 54 inches. 2

i. Exterior doors shall have door sills installed with proper drainage to prevent water from 3 entering the vessel. 4

j. Vertical ladders, if required, shall be constructed of steel, shall be removable and shall 5 comply with ASTM F1166. 6

k. Gaskets shall be installed on all hatches and watertight doors. Gaskets shall be neoprene or 7 silicone. Silicone gaskets shall be Class 3B (tear and flex-resistant), 30 durometer, per 8

Commercial Item Description A-A-59588. Gaskets shall be retained by the hatch cover or 9 door when the device is opened. Gaskets shall be one continuous length and shall be 10 installed with an adhesive compatible with the gasket material. Contact surfaces of gaskets 11 shall be smooth, free of cracks and gouges, and shall be completely free of paint. 12

5.077 ENVIRONMENTAL, SAFETY, AND OCCUPATIONAL HEALTH 14

5.077a. GENERAL 16 The Contractor shall incorporate Environmental, Safety and Occupational Health 17 considerations and criteria into the design of the vessel’s systems, equipment, and arrangements 18 to ensure the safety of personnel, systems, equipment, and the environment, to ensure regulatory 19 compliance with all applicable environmental laws and regulations. 20

5.077b. SYSTEM SAFETY 22 For all new rotating or oscillating equipment and machinery, safety devices or guards 23 shall be installed over unprotected moving parts that could pose a hazard to personnel. 24

5.077c. POLLUTION PREVENTION 26 Neither the vessel nor anything provided with the vessel shall contain materials 27 containing Class I or II ozone depleting substances, as defined in the Clean Air Act, 42 United 28

States Code, or considered hazardous to human health, such as asbestos insulation, coatings 29 containing lead compounds, or Polychlorinated Biphenyl contaminated materials. 30

The vessel shall comply with MARPOL 73/78 International Convention for the 31

Prevention of Pollution from Ships and its subsequent amendments associated with the following 32 regulations: 33

a) MARPOL 73/78 Annex I Equipment for the Prevention of Marine Pollution 34

b) MARPOL 73/78 Annex IV Regulations for the Prevention of Pollution by 35

Sewage from Ships 36

c) MARPOL 73/78 Annex V Regulations for the Prevention of Pollution by Garbage 37 from Ships 38

d) MARPOL 73/78 Annex VI Regulations for the Prevention of Air Pollution from 39

Ships 40

e) 33 CFR 151 Subpart D Coast Guard Regulation on Ballast Water Management 41

5.077d. HAZARDOUS MATERIAL 43 The prohibited chemicals in T9070-AL-DPC-020/077-2 NAVSEA Hazardous Material 44

Avoidance Process manual shall not be used in the conversion and operation of the vessel unless 45 excepted as noted in the process manual or otherwise approved. Use of restricted chemicals in 1 the NAVSEA Hazardous Material Avoidance Process manual shall be minimized in the 2 conversion and operation of the vessel. 3

5.079 STABILITY 5

The vessel shall meet the International Code on Intact Stability, 2008 (2008 IS Code) and 6 applicable ABS Rules for Building and Classing Marine Vessels for a vessel under 90 Meters in 7 length certified for international voyage. The vessel shall meet the stability requirements 8 necessary for the assignment of the International Load Line Certificate. The addition of the 9 crane shall be considered when performing the stability analysis.