Att 1.1 - Fort Harrison EHRM - Drawings Vol 1 Part 1 of 5.pdf

THE SCOPE OF THIS PROJECT INCLUDES BUT NOT LIMITED TO THE FOLLOWING INFRASTRUCTURE IMPROVEMENTS: ELECTRICAL (ELECTRICAL PANEL UPGRADE, POWER (NORMAL, EMERGENCY)), BONDING, UPS, BUILDING MANAGEMENT SYSTEM INTERFACES, ASSESS FOR NEW AND UPGRADES TO EXISTING HVAC, RECONFIGURATION, EXPANSION AND RENOVATION OF EXISTING SPACE (DEMO, NEW CONSTRUCTION, FINISHES), COMMUNICATION INFRASTRUCTURE (NEW DATA OUTLETS, PATCH PANELS, UPGRADE TO CAT 6A CABLE) IN BUILDINGS AS NECESSARY, PHYSICAL SECURITY UPGRADES, ASSESS AND UPGRADE FIBER INFRASTRUCTURE BACKBONE CAMPUS WIDE WITHIN BUILDINGS AND BETWEEN BUILDINGS, HAZARDOUS MATERIAL ABATEMENT. PROJECT BUILDING LOCATIONS INCLUDE: BUILDINGS 141, SADIE, 154A, MADISON, 115, 169, 154, 170, 171, 16, 20 AND SITE.

PROJECT DESCRIPTIONGENERAL PROJECT NOTES

1. THE CONTRACTOR SHALL CAREFULLY EXAMINE THE DRAWINGS AND SPECIFICATION AND RELATED CONTRACT DOCUMENTS, VISIT SITE OF WORK, AND FULLY INFORM THEMSELVES AS ALL EXISTING CONDITIONS, FACILITIES, RESTRICTIONS AND OTHER MATTERS WHICH CAN AFFECT THE WORK, IN TIMELINE, QUALITY OR COST THEREOF; FAILURE OR OMISSION OF ANY CONTRACTOR TO VISIT THE SITE AND ACQUAINT THEMSELVES WITH THE EXISTING CONDITIONS, SHALL IN NO WAY RELIEVE THEM FROM ANY OBLIGATION WITH RESPECT TO THEIR CONTRACT AND NO EXTRA TIME OR COMPENSATION WILL BE ALLOWED BY REASON OF ANY THING OR MATTER CONCERNING WHICH THE CONTRACTOR COULD HAVE FULLY INFORMED THEMSELVES PRIOR TO BIDDING. GENERAL CONTRACTOR SHALL COORDINATE ALL ASPECTS

OF THE BUILDING CONSTRUCTION.

2. THE CONTRACTOR SHALL NOT CONSIDER CONSTRUCTION NOTES TO BE ALL-INCLUSIVE. IT IS THE CONTRACTOR'S RESPONSIBILITY TO INSPECT AND ASSESS EACH AREA AND TO FULFILL THE INTENT OF THE CONTRACT DOCUMENTS. CONTRACTOR SHALL COORDINATE ARCHITECTURAL CONSTRUCTION DRAWING AND NOTES WITH

CIVIL, STRUCTURAL AND MECHANICAL, ELECTRICAL & PLUMBING NOTES AND DRAWINGS.

3. THE DRAWINGS SHALL BE WORKED IN CONJUNCTION WITH THE TECHNICAL SPECIFICATIONS AND CONDITIONS OF THE PROJECT INCLUDED IN THE PROJECT MANUAL WHICH FORM A PART OF THE CONTRACT DOCUMENTS AND CONTAINS ADDITIONAL INFORMATION REQUIRED TO CONSTRUCT THE WORK OF THIS CONTRACT. IN THE EVENT OF A CONFLICT BETWEEN THE DRAWINGS AND THE SPECIFICATION NOTIFY THE COR FOR CLARIFICATION SEVEN DAYS BEFORE BEGINNING WORK ON THE

AFFECTED ACTIVITIES.

4. THE CONTRACTOR SHALL VERIFY ALL DIMENSIONS AND EXISTING CONDITIONS PRIOR TO THE START OF THE WORK. NOTIFY THE COR OF ANY SIGNIFICANT CHANGES IN

DIMENSIONS OR CONDITIONS.

5. THE CONTRACTOR SHALL PROVIDE ALL MATERIALS, TOOLS, EQUIPMENT AND NECESSARY FACILITIES, AND PERFORM ALL LABOR AND SERVICES OF EVERY DESCRIPTION AS REQUIRED TO COMPLETE THE SCOPE OF WORK DEFINED ON THE DRAWINGS AND SPECIFICATIONS WITHIN THE AGREED TIMELINES.

6. THE CONTRACTOR SHALL ARRANGE FOR AND OBTAIN ALL VA ISSUED PERMITS (HOTWORK, ICRA, WEEKENDS, HOLIDAYS, SHUTDOWN, ETC), CERTIFICATES, INSPECTIONS, DEPARTMENT APPROVAL, ETC. FOR WORK PERFORMED UNDER THIS CONTRACT. PROVIDE COPIES OF ALL REQUIRED PERMITS, CERTIFICATES, INSPECTIONS AND AGENCY APPROVALS TO THE COR PRIOR TO THE COMMENCEMENT OF THE SCOPE.

7. FABRICATE AND INSTALL ALL WORK IN STRICT ACCORDANCE WITH THE SPECIFICATIONS, ALL APPLICABLE STATE AND LOCAL CODES, AND THE GENERAL AND

SUPPLEMENTARY CONDITIONS OF THE CONTRACT.

8. U.L. ASSEMBLIES DESCRIBED ARE FOR REFERENCE ONLY. THE GENERAL CONTRACTOR SHALL COORDINATE AND VERIFY THE INSTALLATION OF THE DESCRIBED

SYSTEM(S) .

9. ALL CONTRACTORS AND SUBCONTRACTORS SHALL BE SOLELY RESPONSIBLE FOR THE PROPER PERFORMANCE OF THEIR WORK, COORDINATING WITH OTHER TRADES, MEANS AND METHODS OF CONSTRUCTION, SAFETY AND SECURITY ON SITE.

10. CUTTING AND PATCHING SHALL BE PERFORMED BY EACH TRADE AS NECESSARY FOR THE PERFORMANCE AND INSTALLATION OF THE WORK. CUTTING AND PATCHING SHALL BE PERFORMED IN A WORKMANLIKE MANNER CONSISTENT WITH INDUSTRY STANDARDS FOR FINISHES AND SUBSTRATES AFFECTED.

11. THE CONTRACTOR SHALL PROTECT THE FACILITY FROM WEATHER AND MAINTAIN SECURITY DURING ALL CONSTRUCTION WORK.

12. PROTECT EXISTING PROPERTY DURING CONSTRUCTION. REPAIR OR REPLACE, AT THE DISCRETION AND TO THE SATISFACTION OF THE COR, WITHOUT ADDITIONAL CHARGE TO THE OWNER, ANY EXISTING WORK DAMAGED DURING THE COURSE OF CONSTRUCTION.

13. THE WORK SHALL BE COORDINATED IN GOOD FAITH WITH THE COR AND ALL GOVERNMENT EMPLOYEES 14 DAYS IN ADVANCE OF BEGINNING EACH CONSTRUCTION

ACTIVITY.

14. UNLESS ITEMS OF MATERIAL, EQUIPMENT OR WORK ARE SPECIFICALLY NOTED TO BE PROVIDED OR FURNISHED BY OTHERS, THEY SHALL BE PROVIDED UNDER THIS

CONTRACT BY THE CONTRACTOR.

15. ALL WORK SHALL BE PERFORMED BY SKILLED WORKERS IN A WORKMANLIKE AND PROFESSIONAL MANNER CONSISTENT WITH INDUSTRY STANDARDS AND OR AS

DIRECTED BY THE COR.

16. THE CONTRACTOR SHALL LEAVE THE SITE AND ALL BUILDINGS AND STRUCTURES IN PROPER WORKING ORDER AND SHALL, WITHOUT ADDITIONAL CHARGE, REPLACE ANY WORK, MATERIALS, OR EQUIPMENT FURNISHED AND INSTALLED UNDER THE CONTRACT WHICH DEVELOPS DEFECTS, DUE TO A POSSIBLE WORKMANSHIP ISSUE, WITHIN ONE (1) YEAR FROM THE DATE OF FINAL ACCEPTANCE BY THE OWNER. THIS IS NOT TO LIMIT OR EXCLUDE ANY OTHER WARRANTY OR WARRANTY PERIOD

OTHERWISE DESCRIBED.

17. CONTRACTOR SHALL SCHEDULE, COORDINATE, AND FACILITATE ALL POWER, WATER, OR TELECOMMUNICATION OUTAGES AND SHUTDOWNS. ALL OUTAGES AND

SHUTDOWNS MUST BE SCHEDULED WITH THE COR ONE (1) WEEK PRIOR TO OUTAGE.

18. FIELD VERIFY ALL EXISTING CONDITIONS INCLUDING BUT NOT LIMITED TO REGULATED MATERIALS ARCHITECTURAL, STRUCTURAL, MECHANICAL, ELECTRICAL, PLUMBING, EQUIPMENT, AND ALL OTHER EXISTING SYSTEMS. MAKE NECESSARY PROVISIONS TO MAINTAIN THE INTEGRITY OF SAID SYSTEMS PRIOR TO THE COMMENCEMENT OF DEMOLITION, IF ANY. SEE MECHANICAL, ELECTRICAL, TELECOMMUNICATIONS, AND ARCHITECTURAL DRAWINGS FOR ANY SYSTEM OR PORTIONS

THEREOF TO BE REMOVED, RELOCATED, REVISED OR ABANDONED.

19. ANY CONSTRUCTION INSTALLED IN CONFLICT WITH THE CONTRACT DOCUMENTS SHALL BE CORRECTED AT NO EXPENSE TO THE OWNER.

20. ALL REQUIRED EXITS FROM OCCUPIED PORTIONS OF THE BUILDING MUST BE MAINTAINED AT ALL TIMES. ESTABLISH PROCEDURES TO MINIMIZE CIRCULATION OF CONSTRUCTION PERSONNEL AND MATERIALS THROUGH OCCUPIED PORTIONS OF THE BUILDING. KEEP ALL AREAS ADJACENT TO THE WORK AREA CLEAN.

21. PRIOR TO DELIVERY OF MATERIALS TO THE CONSTRUCTION ZONE AND REMOVAL OF WASTE FROM THE SITE, VERIFY WITH THE COR FOR AN ACCEPTABLE ACCESS ROUTE AND TIME. UNDER NO CIRCUMSTANCES SHALL ANY AREA OUTSIDE THE CONSTRUCTION ZONE BE USED WITHOUT PRIOR WRITTEN APPROVAL FROM THE COR.

ALL BUILDING INTERIOR STAGING AREAS SHALL BE PROTECTED WITH FIRE RESISTANT PLYWOOD ENCLOSURES. ALL TRASH SHALL BE REMOVED FROM THE BUILDING DAILY. CONSTRUCTION MATERIALS SHALL NOT BE STORED IN CORRIDORS OR ANY OTHER UNAUTHORIZED LOCATION AT ANY TIME.

22. FIELD VERIFY ALL EXISTING DIMENSIONS, SERVICES, AND POINTS OF CONNECTION PRIOR TO START OF WORK.

23. THE DESIGN ADEQUACY, SAFETY, AND ERECTION OF BRACING, SHORING, SCAFFOLDING, AND TEMPORARY SUPPORTS AND RESTRAINS IS THE SOLE RESPONSIBILITY OF

THE CONTRACTOR.

24. NOTIFY THE FACILITY OF TIMES WHEN THE CONSTRUCTION NOISE WILL EXCEED 80 DECIBELS . RESCHEDULE SUCH WORK IF SO REQUIRED BY THE FACILITY.

25. NOTIFY THE COR OF ANY DISCREPANCIES DISCOVERED IN THE FIELD THAT REQUIRE CORRECTIVE ACTION PRIOR TO TAKING ANY ACTION.

26. FOR EXISTING FLOORS, CEILINGS, PARTITIONS, AND SERVICES TO REMAIN, PROTECT ALL FINISHES AND MATERIALS, AND REPAIR OR REPLACE ALL ITEMS THAT ARE DAMAGED OR SOILED DURING THE COURSE OF CONSTRUCTION. ALL FINISHES AND MATERIALS SHALL BE PROPERLY INTEGRATED TO CONSTITUTE A UNIFORM

APPEARANCE AND SEAMLESS TRANSITION.

27. ALL ITEMS TO BE REMOVED AND REPLACED SHALL BE HANDLED WITH PROPER CARE AND STORED IN SUCH A MANNER AS TO PREVENT DAMAGE; WHEN DAMAGED, REPLACE AT NO EXPENSE TO THE OWNER.

28. ALL EQUIPMENT AND PIPING SHALL BE SUPPORTED OR BRACED IN ACCORDANCE WITH PROVISIONS OF THE TECHNICAL SPECIFICATIONS.

29. ALL DRAWINGS, THOUGH NOTED TO SCALE, ARE FOR ILLUSTRATION ONLY. DO NOT SCALE THE DRAWINGS. FIELD VERIFY ALL DIMENSIONS. ITEMS WRONGLY LOCATED

BY DRAWINGS SCALING SHALL BE CORRECTED.

30. SIGNAGE CONSTRUCTION, FONT AND SIZE SHALL BE CONSISTENT WITH THE FACILITY'S EXISTING SIGNAGE SYSTEMS. REFER TO SPECIFICATIONS FOR CODE REQUIRED SIGNAGE. PROVIDE ADDITIONAL SIGNAGE AS MAY BE REQUIRED BY REQUEST OF THE FIRE MARSHAL AND/OR BUILDING CODE OFFICIAL OR COR.

31. EXERCISE CARE DURING CONSTRUCTION TO MINIMIZE DISRUPTION OF THE MEDICAL CENTER ROUTINE, COORDINATE SEQUENCE OF WORK AND PHASING WITH THE COR TO MINIMIZE DISRUPTION OF THE MEDICAL CENTER. MANY OF THE WORK ITEMS REQUIRE THE WORK TO BE PERFORMED ONLY AT NIGHT, WEEKENDS, OR

HOLIDAYS WITH PRIOR APPROVAL OF THE COR AT NO ADDITIONAL COST TO THE GOVERNMENT.

32. PRIOR TO DRILLING OR CORING EXISTING CONCRETE, CONTRACTOR SHALL LOCATE EXISTING REINFORCEMENT TO MAINTAIN ADEQUATE CLEARANCES FROM AND AVOID DAMAGE TO EXISTING REINFORCEMENT. CONTRACTOR SHALL USE NON-DESTRUCTIVE TESTING (NDT) TO LOCATE REINFORCEMENT. WHENEVER FEASIBLE, CONTRACTOR SHALL USE GROUND PENETRATING RADAR (GPR) OR MEANS OTHER THAN X-RAY. WHERE X-RAY IS REQUIRED, CONTRACTOR SHALL PROVIDE WRITTEN REQUEST AT LEAST THREE (3) WEEKS PRIOR TO EVENT: WORK MAY BE REQUIRED TO BE PERFORMED OUTSIDE NORMAL WORK HOURS AND SHALL BE DOCUMENTED ON

THE THREE (3) WEEK LOOK-AHEAD SCHEDULE.

33. PROTECT EXISTING FIRE SUPPRESSION SYSTEMS DURING CONSTRUCTION.

34. IN THE EVENT THE CONTRACTOR DISCOVERS HAZARDOUS MATERIALS WHICH ARE NOT AVOIDABLE BY REROUTING THE WORK AND HAVE NOT BEEN DESCRIBED IN THE CONTRACT, THE CONTRACTOR IS TO NOTIFY THE COR AND THE A/E FOR DIFFERING SITE CONDITION ACKNOWLEDGEMENT. REMEDIATION WOULD BE COMPENSATED BY

ADDITIONAL MONEY AND ADDITIONAL TIME FOR CRITICAL PATH ACTIVITIES.

35. CONTRACTOR SHALL PROVIDE STAFF THAT WILL UNDERGO TRAINING AND CERTIFICATION TO ALLOW UN-ESCORTED ACCESS TO IT CLOSETS. THE CONTRACTOR SHALL CERTIFY SUFFICIENT NUMBER OF STAFF TO ACCOMMODATE PROPOSED SCHEDULE WITHOUT RELYING ON VA STAFF TO ACCOMPANY AS ESCORTS. THIS WILL REQUIRE PIV BADGING REQUIREMENT INCLUDING BACKGROUND INVESTIGATIONS. SEE "CONTRACTOR BACKGROUND INVESTIGATIONS REQUEST" FORM. COORDINATE WITH

CO/CS REGARDING SUBMITTING THE FORM.

36. CONTRACTOR IS RESPONSIBLE FOR PROVIDING AND COORDINATING ANY REQUIRED THIRD PARTY INSPECTORS.

OWNER

ARCHITECT

TELECOMMUNICATIONS

ENGINEER, PROJECT LEAD

MECHANICAL ENGINEER

ELECTRICAL ENGINEER

A&E ARCHITECTS

608 NORTH 29th STREET

BILLINGS, MT 59101

406.248.2633

MONTANA VA HEALTHCARE SYSTEM

FORT HARRISON VAMC

RSA

670 W. FIREWEED LN, SUITE 200

ANCHORAGE, ALASKA 99503

907.865.0564

PROJECT TEAM

RSA

670 W. FIREWEED LN, SUITE 200

ANCHORAGE, ALASKA 99503

907.865.0564

STRUCTURAL

KREMER, GHELEN, AND ASSOCIATES

400 COLUMBIA STREET, SUITE 240

VANCOUVER, WA 98660-3413

503.289.2661

GDM - ARCTIC DISTRICT OFFICE

1401 W 34TH AVE, SUITE 200

ANCHORAGE, ALASKA 99503

907.917.2957

CIVIL ENGINEER

GDM - COLUMBIA GORGE DISTRICT OFFICE

1000 W STEUBEN ST, UNIT THREE

BINGEN, WA 98605

541.436.4723

INDUSTRIAL HYGIENEFIRE PROTECTION ENGINEER

TERP CONSULTING

14241 E 4TH AVAENUE, SUITE 5-230

AURORA, CO 80011

720.779.0797

GDM - ARCTIC DISTRICT OFFICE

1401 W 34TH AVE, SUITE 200

ANCHORAGE, ALASKA 99503

907.917.2957

RSA

670 W. FIREWEED LN, SUITE 200

ANCHORAGE, ALASKA 99503

907.276.0521

"OWNER": THE OWNER IS UNITED STATES GOVERNMENT - DEPT. OF VETERANS AFFAIRS AND IS REFERRED TO THROUGHOUT THE CONTRACT DOCUMENTS AS IF SINGULAR IN NUMBER. THE TERM "OWNER"

MEANS THE OWNER OR THE OWNER'S CONTRACTING OFFICER'S AUTHORIZED REPRESENTATIVE.

"CONTRACTING OFFICER" OR "C.O.": THE OWNER'S AUTHORIZED REPRESENTATIVE RESPONSIBLE FOR ADMINISTRATING THE CONTRACT BETWEEN THE GENERAL CONTRACTOR AND OWNER. THE TERM INCLUDES CERTAIN AUTHORIZED REPRESENTATIVES OF THE CONTRACTING OFFICER ACTING WITHIN THE

LIMITS OF THEIR AUTHORITY AS DELEGATED BY THE CONTRACTING OFFICER.

"CONTRACTING OFFICER'S REPRESENTATIVE", (COR): MEANS THE CONTRACTING OFFICER'S AUTHORIZED REPRESENTATIVE, IN PART, RESPONSIBLE FOR MONITORING THE CONTRACTOR'S (PLURAL) PERFORMANCE.

"WORK": THE TERM "WORK" MEANS THE CONSTRUCTION AND SERVICES REQUIRED BY THE CONTRACT DOCUMENTS, WHETHER COMPLETED OR PARTIALLY COMPLETED, AND INCLUDES ALL OTHER LABOR, MATERIALS, EQUIPMENT AND SERVICES PROVIDED BY THE CONTRACTOR TO FULFILL THE CONTRACTOR'S

OBLIGATIONS. THE WORK MAY CONSTITUTE THE WHOLE OR A PART OF THE PROJECT.

"PROJECT": THE TOTAL CONSTRUCTION OF WHICH THE WORK PERFORMED UNDER THE CONTRACT

DOCUMENTS

"DRAWINGS", "SHOP DRAWINGS" OR "PLANS": THE GRAPHIC AND PICTORIAL PORTIONS OF CONTRACT DOCUMENTS, WHENEVER LOCATED AND WHENEVER ISSUED, SHOWING DESIGN, LOCATION AND DIMENSIONS OF THE WORK, GENERALLY INCLUDING PLANS, ELEVATIONS, SECTIONS, DETAILS, SCHEDULES AND DIAGRAMS.

"PROJECT SUPERVISOR" OR "SUPERVISOR": MEANS THE ON-SITE SUPERVISION REPRESENTATIVE OF THE

PROJECT.

"ARCHITECT" OR "ENGINEER": MEANS THE VA'S ARCHITECTS, ENGINEERS AND OTHER DESIGN AND ENGINEERS PROFESSIONALS FOR THIS PROJECT, AND REFERRED THROUGHOUT THE DRAWINGS AS IF

SINGULAR IN NUMBER.

"TRADE CONTRACTOR" OR "CONTRACTORS": MEANS THE ENTITY UNDER CONTRACT AGREEMENT WITH THE GENERAL CONTRACTOR TO PROVIDE THE SPECIFIED GENERAL AND OR SPECIALTY WORK IN CONNECTION

WITH THIS PROJECT.

"FURNISH" OR "FURNISHED": MEANS PROVIDING ALL MATERIALS, SHOP DRAWINGS, TRANSPORTATION, INSURANCE, FIELD MEASUREMENTS, EXPEDITING, SHIPPING, HANDLING, PACKAGING, STORAGE, TOUCH-UP MATERIALS, OWNER'S MANUALS, TRAINING AND ANY OTHER ACCESSORIES REQUIRED FOR A COMPLETE

INSTALLATION.

"INSTALL" OR "INSTALLED": MEANS COMPLETING ALL WORK AND COSTS ASSOCIATED WITH UNLOADING, UNPACKING, HOISTING, STORAGE, HANGERS, SUPPORTS,SLEEVES, SCAFFOLDING, COORDINATION, LAYOUT, SHOP DRAWINGS, EXCAVATION, BACKFILL, DEWATERING, INSTALLATION, CUTTING AND PATCHING, FIRESTOPPING, CLEAN-UP, INSPECTION, DOCUMENTATION, PROTECTION OF SCOPE OF WORK AND ALL

ACCESSORIES, SERVICE AND FACILITIES REQUIRED FOR A COMPLETE INSTALLATION.

"PROVIDE" OR "PROVIDED": MEANS TO FURNISH AND INSTALL AND SHALL INCLUDE, WITHOUT

LIMITATION, ALL LABOR, MATERIALS, EQUIPMENTS, TRANSPORTATION SERVICES, AND OTHER ITEMS REQUIRED

TO COMPLETE THE REFERENCED TASK.

"BY OWNER"; "BY VAMC" OR "BY VA": MEANS ITEMS WILL BE ORDERED, PAID FOR, SHIPPED TO THE JOB

SITE AND INSTALLED BY THE OWNER.

"NOT IN CONTRACT" OR "N.I.C.": MEANS MATERIALS OR EQUIPMENT NOT IN THE CONTRACT, BUT MAY REQUIRE PROVISIONS IN THE CONSTRUCTION FOR FUTURE INSTALLATION AS SPECIFIED OR SHOWN.

OTHER DEFINITIONS OF WORDS AND TERMS USED IN THE DRAWINGS AND SPECIFICATIONS CAN BE FOUND IN THE LEGENDS AND SYMBOLS DRAWINGS FOR EACH DISCIPLINE AND IN DIVISION 0 AND 1 OF THE PROJECT

MANUAL.

BASIC DEFINITIONS

TEMPORARY FIRE & SMOKE PROTECTION

IF FLOOR OR RATED WALL PENETRATIONS CANNOT BE FIRESTOPPED AT THE END OF THE WORK SHIFT DUE

TO ANY INCOMPLETE WORK, PROVIDE TEMPORARY FIRESTOPPING COMPOSED OF MINERAL WOOL

SATISFYING FIRE RATING REQUIREMENTS AT PENETRATIONS

IF MULTIPLE CEILING TILES MUST BE REMOVED AND CANNOT BE REPLACED AT THE END OF THE WORK SHIFT, A 1-HOUR FIRE BARRIER WILL NEED TO BE CONSTRUCTED. IF CONTRACTOR IDENTIFIES UPCOMING WORK RESULTING IN A LONG-TERM CEILING REMOVAL, NOTIFY THE COR IMMEDIATELY WHETHER A RATED ENCLOSURE MUST BE CONSTRUCTION OR TEMPORARY UPRIGHT SPRINKLER HEADS INSTALLED. THIS

WORK IS TO BE PART OF THE SUBMITTED SCOPE OF WORK.

IF FLOOR OR RATED WALL PENETRATIONS CANNOT BE FIRESTOPPED AT THE END OF THE WORK SHIFT DUE TO THE NEED TO PULL ADDITIONAL CABLES, TEMPORARY FIRESTOPPING COMPOSED OF MINERAL WOOL SHOULD BE INSTALLED IN THE PENETRATION TO PROVIDE PROTECTION AGAINST FIRE/SMOKE SPREAD

THROUGH THE UNSEALED PENETRATION.

PROJECT KEY PLAN

MONTANA VA HEALTHCARE SYSTEM

ROCKY MOUNTAIN NETWORK 19

3687 VETERANS DRIVE | FORT HARRISON, MT 59636

PROJECT

NORTH

NORTH

MONTANA VA HEALTHCARE SYSTEM

ELECTRONIC HEALTH RECORD MODERNIZATION (EHRM)

INFRASTRUCTURE UPGRADES - FORT HARRISON, MT

PROJECT NO. 436-21-700

CONTRACT NO. 36C77621C0112

100% CONSTRUCTION DOCUMENTS (CD) SUBMITTAL

MONTANA VA HEALTHCARE SYSTEM

ROCKY MOUNTAIN NETWORK 19

3687 VETERANS DRIVE | FORT HARRISON, MT 59636

ARCHITECTURAL ABBREVIATIONS

AB ANCHOR BOLT

ABV ABOVE

A/C AIR CONDITIONING

ACT ACOUSTICAL CEILING TILE

ADDL ADDITIONAL

ADJ ADJUSTABLE

AFF ABOVE FINISH FLOOR

ALT ALTERNATE

ALUM ALUMINUM

ARCH ARCHITECT(URAL)

AWN AWNING

B/ BOTTOM OF

BD BOARD

BLDG BUILDING

BLKG BLOCKING

BM BEAM OR BENCHMARK

BRG BEARING

BTWN BETWEEN

BUR BUILT-UP ROOF

CAB CABINET

CJ CONTROL JOINT

CL CENTERLINE

CLG CEILING

CMU CONCRETE MASONRY UNIT

CO CLEAN OUT

COL COLUMN

CONC CONCRETE

CONT CONTINUOUS

CONST CONSTRUCTION

CG CORNER GUARD

CPT CARPET

CSMT CASEMENT

CT CERAMIC TILE

D DEEP

DF DRINKING FOUNTAIN

DH DOUBLE HUNG

DIM(S) DIMENSIONS

DISP DISPENSER

DN DOWN

DR DOOR

DS DOWNSPOUT

DTL DETAIL

DWG DRAWING

E EAST

EA EACH

EC EXISTING COLUMN

EJ EXPANSION JOINT

ELEC ELECTRICAL

EL ELEVATION

ELEV ELEVATOR

EQ EQUAL

EQUIP EQUIPMENT

EWC ELECTRIC WATER COOLER

EXH EXHAUST

EXIST EXISTING

EXP EXPANSION OR EXPOSED

EXT EXTERIOR

FACP FIRE ALARM CONTROL PANEL

FD FLOOR DRAIN

FE FIRE EXTINGUISHER

FEC FIRE EXTINGUISHER CABINET

F.F. FINISH FLOOR

FIN FINISH

FIXT FIXTURE

FLR FLOOR

FND FOUNDATION

FP FIRE PROTECTION

FR FRAME

FRMG FRAMING

FT FEET/FOOT OR FIRE TREATED

FTG FOOTING

FTNG FOOTING

FRP FIBERGLASS REINFORCED PANEL

FRT FIRE RETARDANT TREATED

GA GAUGE

GALV GALVANIZED

GB GYPSUM BOARD

GC GENERAL CONTRACTOR

GL GLASS, GLAZING

GWB GYPSUM WALL BOARD

GYP GYPSUM

HC HANDICAP

HDR HEADER

HDW HARDWARE

HM HOLLOW METAL

HORIZ HORIZONTAL

HR HOUR

HT HEIGHT

HTD HEATED

HVAC HEATING/VENTILATION & AIR

CONDITIONING

ID INSIDE DIAMETER

INFO INFORMATION

ISO ISOCYANURATE

INSUL INSULATE / INSULATED / INSULATION

INT INTERIOR

INV INVERT

JT JOINT

J-BOX JUNCTION BOX

KIT KITCHEN

L LONG / LENGTH

LAM LAMINATE(D)

LAV LAVATORY

LF LINEAR FEET

LT LIGHT

MAS MASONRY

MATL MATERIAL

MAX MAXIMUM

MECH MECHANIC(AL)

MEZZ MEZZANINE

MFR MANUFACTURER

MH MANHOLE

MIN MINIMUM

MISC MISCELLANEOUS

MO MASONRY OPENING

MTL METAL

N NORTH

NIC NOT IN CONTRACT

NOM NOMINAL

NTS NOT TO SCALE

OC ON CENTER

OD OUTSIDE DIAMETER OR

OVERFLOW DRAIN

OPNG OPENING

OPP OPPOSITE

OSB ORIENTED STRAND BOARD

OVHD OVERHEAD

PL PLATE

PLAM PLASTIC LAMINATE

PLUMB PLUMBING

PLYWD PLYWOOD

PNL PANEL

PNT PAINT

POLY POLYESTER OR POLYOLEFIN

PSF POUNDS PER SQUARE FOOT

PSI POUNDS PER SQUARE INCH

PT PRESSURE TREATED OR POINT

PVMT PAVEMENT

QT QUARRY TILE

QTR QUARTER

QTY QUANTITY

R RADIUS

RA RETURN AIR

RB RUBBER BASE

RD ROOF DRAIN

RECY RECYCLE(D)

REF REFERENCE

REFRIG REFRIGERATOR OR

REFRIGERATION

REINF REINFORCE

REQD REQUIRED

RM ROOM

RO ROUGH OPENING

ROW RIGHT OF WAY

S SOUTH

SC SOLID CORE

SCH SCHEDULE

SCHED SCHEDULED

SECT SECTION

SF SQUARE FEET

SFRM SPRAY APPLIED FIRE RESISTIVE

MATERIAL

SGL SINGLE

SHT SHEET

SHTG SHEATHING

SIM SIMILAR

SPECS SPECIFICATIONS

SOD SLAB ON DECK

SOG SLAB ON GRADE

SOH SAME OPPOSITE HAND

SS STAINLESS STEEL

ST STONE TILE

STD STANDARD

STND STANDARD

STL STEEL

STRUCT STRUCTURAL

TEMP TEMPERED

THK THICK

THRESH THRESHOLD

T.O. TOP OF

TOBM TOP OF BEAM

T.O.BM. TOP OF BEAM

T.O.P. TOP OF PLATE

T.O.S. TOP OF STEEL

T/ TOP OF

T&G TONGUE AND GROOVE

TEL TELEPHONE

THK THICK

TRANS TRANSOM

TV TELEVISION

TYP TYPICAL

UL UNDERWRITERS LABORATORY

UNO UNLESS NOTED OTHERWISE

VB VINYL BASE

VCT VINYL COMPOSITION TILE

VERT VERTICAL

VEST VESTIBULE

VIF VERIFY IN FIELD

VP VENEER PLASTER

VR VAPOR RETARDER

VT VINYL TILE

VWC VINYL WALL COVERING

W WIDE OR WEST

W/ WITH

WC WATER CLOSET

WD WOOD

WDW WINDOW

WG WALL GUARD

WH WATER HEATER

W/IN WITHIN

W/O WITHOUT

WP WATERPROOF

WR WATER RESISTANT

WT WEIGHT

WWF WELDED WIRE FABRIC

# NUMBER OR POUND

@ AT

WINDOW TAGROOM TAG

DOOR TAG KEYNOTE TAG

ASSEMBLY TAG

MATERIAL TAG

REVISION TAGREVISION CLOUD XXX

X

XX-XX

X

CEILING TAG VIEW REFERENCE

BUILDING

SECTION

WALL

SECTION

ELEVATION

GRID LINE

DETAIL

CALL OUT

INTERIOR

ELEVATION

EXTERIOR

ELEVATION

DETAIL

SECTION

#1

#2

#3

#4

POSITION OF VIEW ON SHEET

VIEW NAME

1 1/2" = 1'-0"

VIEW SCALE

VIEW NAME

A6.#

A3.#

A3.#

A3.#

A4.#

A3.#

ROOM NAME

101.1

X

X'-X"

XXX-X

XXX

W D

HT

CASEWORK TAG

CABINET DESIGN SERIES NO.

EXPLANATION OF SYMBOLS

TYPICAL SHEET VIEW NUMBERING LAYOUT

NUMBERING STARTS IN BOTTOM LEFT CORNER, MOVING

UPWARDS, SKIPPING NONE

ARCH E1 (30"x42")

PROJECT SITE

VA MEDICAL CENTER

FORT HARRISON, MT

PROJECT LOCATION MAP

HELENA, MT

U.S. Department of Veterans Affairs

PROJECT NUMBER

BUILDING NUMBER

DRAWING NUMBER

PROJECT TITLE

LOCATION

ISSUE DATE CHECKED BY DRAWN BY

DRAWING TITLE

APPROVED:

VA FORM 08 - 6231

A

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PHASE

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

FLS

PROGRAM

CONTRACTING

ACTIVITY

CENTRAL (PCAC)

B

IM

/2

V

A M e d ic a l C e n te r

F t H a rr is o n

M T

/2

G e n e ra l In fo r2

.r v t

/2

/2

:2

:3

P

M

00-GI-000.1

COVER AND PROJECT GENERAL

INFORMATION VOLUME 1GDM

1000 W STEUBEN ST. UNIT 3

BINGEN, WA 98605

541.436.4723

ADAM GODDIN, PE

A&E DESIGN

124 NORTH 29TH STREET, #100

BILLINGS, MONTANA 59101

406.248.2633

T. MARCELLO PIERROTTET, AIA

EHRM INFRASTRUCTURE

UPGRADES

FORT HARRISON, MONTANA

436-21-700

GEN INFO

Project Director

JPRTMP05/20/2022

100% CONSTRUCTION

DOCUMENTS

ARCHITECTA/E:

VOLUME 1

CIVIL STRUCTURAL ARCHITECTURAL MECHANICAL

Revisions: Date:

U.S. Department of Veterans Affairs

PROJECT NUMBER

BUILDING NUMBER

DRAWING NUMBER

PROJECT TITLE

LOCATION

ISSUE DATE CHECKED BY DRAWN BY

DRAWING TITLE

APPROVED:

VA FORM 08 - 6231

A

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PHASE

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

FLS

PROGRAM

CONTRACTING

ACTIVITY

CENTRAL (PCAC)

B

IM

/2

V

A M e d ic a l C e n te r

F t H a rr is o n

M T

/2

G e n e ra l In fo r2

.r v t

/2

/2

:2

:4

P

M

00-GI-001

INDEX OF DRAWINGS

GDM

1000 W STEUBEN ST. UNIT 3

BINGEN, WA 98605

541.436.4723

ADAM GODDIN, PE

A&E DESIGN

124 NORTH 29TH STREET, #100

BILLINGS, MONTANA 59101

406.248.2633

T. MARCELLO PIERROTTET, AIA

EHRM INFRASTRUCTURE

UPGRADES

FORT HARRISON, MONTANA

436-21-700

GEN INFO

Project Director

JPRTMP05/20/2022

100% CONSTRUCTION

DOCUMENTS

ARCHITECTA/E:

DRAWING INDEX

GENERAL

ARCHITECTURAL - DEMOLITION

ARCHITECTURAL REMODEL

VOLUME 1

SHEET NO. SHEET NAME

16-AE-201 16-FLOOR PLANS

20-AE-201 20-FLOOR PLAN

141-AE-200 141-BASEMENT FLOOR PLAN

141-AE-201 141-LEVEL 1 FLOOR PLAN

141-AE-202 141-LEVEL 2 FLOOR PLAN

141-AE-203 141-LEVEL 3 FLOOR PLAN

141-AE-300 141-ENLARGED BASEMENT TR FLOOR PLANS

141-AE-301 141-ENLARGED LEVEL 1 TR FLOOR PLAN

141-AE-302 141-ENLARGED LEVEL 2 TR FLOOR PLANS

141-AE-303 141-ENLARGED LEVEL 3 TR FLOOR PLAN

154-AE-200 154-BASEMENT FLOOR PLAN

154-AE-201 154-LEVEL 1 FLOOR PLAN

154-AE-202 154-LEVEL 2 FLOOR PLAN

154-AE-203 154-LEVEL 3 AND LEVEL 4 FLOOR PLAN

154-AE-204 154-ROOF PLAN

154-AE-300 154-ENLARGED BASEMENT FLOOR PLANS

154-AE-301 154-ENLARGED LEVEL 1 FLOOR PLANS AND

ELEVATIONS

154-AE-302 154-ENLARGED LEVEL 1 FLOOR PLAN AND ELEVATIONS

154-AE-303 154-ENLARGED LEVEL 2 FLOOR PLAN AND ELEVATIONS

154-AE-304 154-ENLARGED LEVEL 3 FLOOR PLANS AND

ELEVATIONS

154-AE-305 154-ENLARGED LEVEL 4 FLOOR PLANS AND

ELEVATIONS

154-AE-601 154-MCR ELEVATIONS AND CASEWORK

154A-AE-200 154A-BASEMENT FLOOR PLAN

154A-AE-201 154A-LEVEL 1 FLOOR PLAN

154A-AE-202 154A-ROOF PLAN

154A-AE-301 154A-ENLARGED PLANS

169-AE-201 169-FLOOR AND ROOF PLAN

169-AE-301 169-ENLARGED PLANS

170-AE-201 170-FLOOR PLANS AND ELEVATIONS

171-AE-201 171-FLOOR PLANS

SHEET NO. SHEET NAME

20-AD-201 20-DEMOLITION FLOOR PLAN

141-AD-200 141 -BASEMENT DEMOLITION PLANS

141-AD-201 141-LEVEL 1 DEMOLITION PLAN

141-AD-202 141-LEVEL 2 DEMOLITION PLANS

141-AD-203 141 -LEVEL 3 DEMOLITION PLANS

154-AD-200 154-BASEMENT LEVEL DEMOLITION PLAN

154-AD-201 154-LEVEL 1 DEMOLITION PLAN

154-AD-202 154-LEVEL 2 DEMOLITION PLAN

154-AD-203 154-LEVEL 3 DEMOLITION PLAN

154-AD-204 154-LEVEL 4 DEMOLITION PLAN

154-AD-300 154-BASEMENT ENLARGED DEMOLITION FLOOR PLAN

154A-AD-201 154A - DEMOLITION PLANS

169-AD-201 169-DEMOLITION FLOOR PLANS

SHEET NO. SHEET NAME

00-GI-000.1 COVER AND PROJECT GENERAL INFORMATION VOLUME 1

00-GI-001 INDEX OF DRAWINGS

00-GI-002 PROJECT CODE SUMMARY / PROJECT GENERAL NOTES

00-GI-003 ICRA CLASSIFICATION PROCESS

00-GI-004 PROJECT LOCATION MAPS & CAMPUS PLAN

00-GI-005 PROJECT ASSEMBLY TYPES AND TYPICAL ROOF DETAILS

00-GI-005.1 UL ASSEMBLIES

00-GI-005.2 UL ASSEMBLIES

00-GI-005.3 UL ASSEMBLIES

00-GI-006 DOOR SCHEDULE, TYPICAL CEILING AND DOOR DETAILS

00-GI-007 PARTITION DETAILS

00-GI-008 FIRE PROTECTION GENERAL NOTES

SHEET NO. SHEET NAME

CI0001 CIVIL - GENERAL NOTES

RC0001 CIVIL - EXISTING CONDITIONS PLAN

CS0001 CIVIL - FIBER OPTICS SITE PLAN

CS0002 CIVIL - ENLARGED FIBER OPTICS SITE PLAN

CU0101 CIVIL - SECONDRARY FIBER OPTICS PLAN AND PROFILE

CJ00001 CIVIL - DETAILS

CIVIL

SHEET NO. SHEET NAME

16-ED-011 ELECTRICAL DEMOLITION PLAN - BLDG 16 FIRST FLOOR

020-ED-011 ELECTIRCAL DEMOLITION PLAN - BLDG 20

141-ED-0B1 ELECTRICAL DEMOLITION PLAN - BLDG 141 BASEMENT

141-ED-011 ELECTRICAL DEMOLITION PLAN - BLDG 141 FIRST FLOOR

141-ED-021 ELECTRICAL DEMOLITION PLAN - BLDG 141 SECOND FLOOR

141-ED-031 ELECTRICAL DEMOLITION PLAN - BLDG 141 THRID FLOOR

154-ED-0B1 ELECTRICAL DEMOLITION PLAN - BLDG 154 BASEMENT

154-ED-0B1.1 ENLARGED LIGHTING DEMOLITION PLAN - MCR BASEMENT

154-ED-0B1.2 ENLARGED ELECTRICAL DEMO PLAN - MCR BASEMENT

154-ED-011 ELECTRICAL DEMOLITION PLAN - BLDG 154 FIRST FLOOR

154-ED-021 ELECTRICAL DEMOLITION PLAN - BLDG 154 SECOND FLOOR

154-ED-031 ELECTRICAL DEMOLITION PLAN - BLDG 154 THIRD FLOOR

154-ED-041 ELECTRICAL DEMOLITION PLAN - BLDG 154 FOURTH FLOOR

154A-ED-0B1 ELECTRICAL DEMOLITION PLAN - BLDG 154A BASEMENT

154A-ED-0B1.1 ENLARGED ELECTRICAL DEMO PLAN - BLDG 154A BASEMENT

154A-ED-011 ELECTRICAL DEMOLITION PLAN - BLDG 154A FIRST FLOOR

169-ED-011 ELECTRICAL DEMOLITION PLAN - BLDG 169

170-ED-011 ELECTRICAL DEMOLITION PLAN - BLDG 170

171-ED-011 ELECTRICAL DEMOLITION PLAN - BLDG 171 FIRST FLOOR

ELECTRICAL DEMOLITIONMECHANICAL DEMOLITION

VOLUME 2

TELECOMMUNICATIONS DEMOLITION

SHEET NO. SHEET NAME

EK-001 POWER AND ELEVATIONS AND DETAILS

EK-002 POWER ONE-LINE DIAGRAMS

EK-003 ELECTRICAL LEGEND AND FIXTURE SCHEDULE

EK-004 ELECTRICAL DETAILS

EK-005 ELECTRICAL LOAD CALCULATIONS

EK-006 BUILDINGS 16 & 20 - PANEL SCHEDULES

EK-007 BUILDING 141 - PANEL SCHEDULES

EK-008 BUILDING 141 - PANEL SCHEDULES

EK-009 BUILDING 154 - PANEL SCHEDULES

EK-010 BUILDING 154 - PANEL SCHEDULES

EK-011 BUILDING 154 - PANEL SCHEDULES

EK-012 BUILDING 154 - PANEL SCHEDULES

EK-013 BUILDINGS 154A - PANEL SCHEDULES

EK-014 BUILDINGS 169 & 170 - PANEL SCHEDULES

16-EP-011 ELECTRICAL REMODEL PLAN - BLDG 16 FIRST FLOOR

020-EP-011 ELECTRICAL REMODEL PLAN - BLDG 20

141-EP-0B1 ELECTRICAL REMODEL PLAN - BLDG 141 BASEMENT

141-EP-011 ELECTRICAL REMODEL PLAN - BLDG 141 FIRST FLOOR

141-EP-021 ELECTRICAL REMODEL PLAN - BLDG 141 SECOND FLOOR

141-EP-031 ELECTRICAL REMODEL PLAN - BLDG 141 THIRD FLOOR

154-EP-0B1 ELECTRICAL REMODEL PLAN - BLDG 154 BASEMENT

154-EP-0B1.1 ENLARGED LIGHTING REMODEL PLAN - MCR BASEMENT

154-EP-0B1.2 ENLARGED ELECTRICAL REMODEL PLAN - MCR BASEMENT

154-EP-0B1.3 VA EQUIPMENT POWER DETAILS

154-EP-011 ELECTRICAL REMODEL PLAN - BLDG 154 FIRST FLOOR

154-EP-021 ELECTRICAL REMODEL PLAN - BLDG 154 SECOND FLOOR

154-EP-031 ELECTRICAL REMODEL PLAN - BLDG 154 THIRD FLOOR

154-EP-041 ELECTRICAL REMODEL PLAN - BLDG 154 FOURTH FLOOR

154A-EP-0B1 ELECTRICAL REMODEL PLAN - BLDG 154A BASEMENT

154A-EP-0B1.1 ENLARGED ELECTRICAL REMODEL PLAN - BLDG 154A BASEMENT

154A-EP-011 ELECTRICAL REMODEL PLAN - BLDG 154A FIRST FLOOR

169-EP-011 ELECTRICAL REMODEL PLAN - BLDG 169

170-EP-011 ELECTRICAL REMODEL PLAN - BLDG 170

171-EP-011 ELECTRICAL REMODEL PLAN - BLDG 171 FIRST FLOOR

ELECTRICAL REMODEL

SHEET NO. SHEET NAME

16-TD-011 TELECOM DEMOLITION PLAN - BLDG 16 FIRST FLOOR

020-TD-011 TELECOM DEMOLITION PLAN - BLDG 20

141-TD-0B1 TELECOM DEMOLITION PLAN - BLDG 141 BASEMENT

141-TD-011 TELECOM DEMOLITION PLAN - BLDG 141 FIRST FLOOR

141-TD-021 TELECOM DEMOLITION PLAN - BLDG 141 SECOND FLOOR

141-TD-031 TELECOM DEMOLITION PLAN - BLDG 141 THIRD FLOOR

154-TD-0B1 TELECOM DEMOLITION PLAN - BLDG 154 BASEMENT

154-TD-0B1.1 ENLARGED TELECOM DEMOLITION PLAN - MCR BASEMENT

154-TD-011 TELECOM DEMOLITION PLAN - BLDG 154 FIRST FLOOR

154-TD-021 TELECOM DEMOLITION PLAN - BLDG 154 SECOND FLOOR

154-TD-031 TELECOM DEMOLITION PLAN - BLDG 154 THIRD FLOOR

154-TD-041 TELECOM DEMOLITION PLAN - BLDG 154 FOURTH FLOOR

154A-TD-0B1 TELECOM DEMOLITION PLAN - BLDG 154A BASEMENT

154A-TD-0B1.1 ENLARGED TELECOM DEMOLITION PLAN - BLDG 154A BASEMENT

154A-TD-011 TELECOM DEMOLITION PLAN - BLDG 154A FIRST FLOOR

169-TD-011 TELECOM DEMOLITION PLAN - BLDG 169

170-TD-011 TELECOM DEMOLITION PLAN - BLDG 170

171-TD-011 TELECOM DEMOLITION PLAN - BLDG 171 FIRST FLOOR

SHEET NO. SHEET NAME

TJ-001 GENERAL TELECOM NOTES

TK-001 ELECOM BONDING DETAILS

TK-002 TELECOM BONDING AND TELECOM DETAILS

TK-003 TYPICAL RACK AND CABINET DETAILS

TK-004 PATCH PANEL SCHEDULES - BUILDING 141

TK-005 PATCH PANEL SCHEDULES - BUILDING 141

TK-006 PATCH PANEL SCHEDULES - BUILDING 141

TK-007 PATCH PANEL SCHEDULES - BUILDING 141 & 150

TK-008 PATCH PANEL SCHEDULES - BUILDING 154

TK-009 PATCH PANEL SCHEDULES - BUILDING 154

TK-010 PATCH PANEL SCHEDULES - BUILDING 154

TK-011 PATCH PANEL SCHEDULES - BUILDING 154

TK-012 PATCH PANEL SCHEDULES - BUILDING 154

TK-013 PATCH PANEL SCHEDULES - BUILDING 154

TK-014 PATCH PANEL SCHEDULES - BUILDING 154

TK-015 PATCH PANEL SCHEDULES - BUILDING 154

TK-016 PATCH PANEL SCHEDULES - BUILDING 154

TK-017 PATCH PANEL SCHEDULES - BUILDING 154

TK-018 PATCH PANEL SCHEDULES - BUILDING 154

TK-019 PATCH PANEL SCHEDULES - BUILDING 154

TK-020 PATCH PANEL SCHEDULES - BUILDING 154

TK-021 PATCH PANEL SCHEDULES - BUILDING 154A

TK-022 PATCH PANEL SCHEDULES - BUILDING 154A

TK-023 PATCH PANEL SCHEDULES - BUILDING 154A

TK-024 PATCH PANEL SCHEDULES - BUILDING 154A

TK-025 PATCH PANEL SCHEDULES - BUILDING 154A

TK-026 PATCH PANEL SCHEDULES - BUILDING 154A

TK-027 PATCH PANEL SCHEDULES - BUILDING 154A

TK-028 PATCH PANEL SCHEDULES - BUILDING 154B

TK-029 PATCH PANEL SCHEDULES - BUILDING 169

TK-030 PATCH PANEL SCHEDULES - BUILDING 169

TK-031 PATCH PANEL SCHEDULES - BUILDING 169

TK-032 PATCH PANEL SCHEDULES - BUILDING 170 & 171

TK-033 FIBER RISER DIAGRAM

TK-034 ANALOG BACKBONE RISER DIAGRAM

TK-035 TELECOM ROOM DETAILS

TK-036 NEW PATCH PANEL SCHEDULES

TK-037 NEW PATCH PANEL SCHEDULES

TK-038 NEW PATCH PANEL SCHEDULES

TK-039 NEW PATCH PANEL SCHEDULES

TK-040 NEW PATCH PANEL SCHEDULES

TK-041 NEW PATCH PANEL SCHEDULES

TK-042 NEW PATCH PANEL SCHEDULES

TK-043 NEW PATCH PANEL SCHEDULES

TK-044 NEW PATCH PANEL SCHEDULES

TK-045 NEW PATCH PANEL SCHEDULES

TK-046 NEW PATCH PANEL SCHEDULES

TK-047 NEW RACK ELEVATIONS

TK-048 NEW RACK ELEVATIONS

TK-049 NEW RACK ELEVATIONS

TS-001 FIBER SITE PLAN

TELECOMMUNICATIONS REMODEL

16-TN-011 TELECOM REMODEL PLAN - BLDG 16 FIRST FLOOR

16-TN-011.1 TELECOM DISTANCE ASSESSMENT - BLDG 16

020-TN-011 TELECOM REMODEL PLAN - BLDG 20

020-TN-011.1 TELECOM DISTANCE ASSESSMENT - BLDG 20

141-TN-0B1 TELECOM REMODEL PLAN - BLDG 141 BASEMENT

141-TN-0B1.1 ELE DISTANCE ASSESSMENT - BLDG 141 BASEMENT

141-TN-011 TELECOM REMODEL PLAN - BLDG 141 FIRST FLOOR

141-TN-011.1 TELE DISTANCE ASSESSMENT - BLDG 141 FIRST FLOOR

141-TN-021 ELECOM REMODEL PLAN - BLDG 141 SECOND FLOOR

141-TN-021.1 TELE DISTANCE ASSESSMENT - BLDG 141 SECOND FLOOR

141-TN-031 TELECOM REMODEL PLAN - BLDG 141 THIRD FLOOR

141-TN-031.1 TELE DISTANCE ASSESSMENT - BLDG 141 THIRD FLOOR

154-TN-0B1 TELECOM REMODEL PLAN - BLDG 154 BASEMENT

154-TN-0B1.1 TELECOM DISTANCE ASSESSMENT - BLDG 154 BASEMENT

154-TN-0B1.11 ENLARGED TELECOM REMODEL PLAN - MCR BASEMENT

154-TN-0B1.12 VA MCR DETAILS

154-TN-0B1.13 VA MCR DETAILS

154-TN-0B1.14 VA MCR DETAILS

154-TN-011 TELECOM REMODEL PLAN - BLDG 154 FIRST FLOOR

154-TN-011.1 TELECOM DISTANCE ASSESSMENT - BLDG 154 FIRST FLOOR

154-TN-012 TELECOM REMODEL PLAN - BLDG 154 FIRST FLOOR SECTION 1

154-TN-013 TELECOM REMODEL PLAN - BLDG 154 FIRST FLOOR SECTION 2 & 3

154-TN-021 TELECOM REMODEL PLAN - BLDG 154 SECOND FLOOR

154-TN-021.1 TELECOM DISTANCE ASSESSMENT - BLDG 154 SECOND FLOOR

154-TN-031 TELECOM REMODEL PLAN - BLDG 154 THIRD FLOOR

154-TN-031.1 TELECOM DISTANCE ASSESSMENT - BLDG 154 THIRD FLOOR

154-TN-041 TELECOM REMODEL PLAN - BLDG 154 FOURTH FLOOR

154-TN-041.1 TELECOM DISTANCE ASSESSMENT - BLDG 154 FOURTH FLOOR

154A-TN-0B1 TELECOM REMODEL PLAN - BLDG 154A BASEMENT

154A-TN-0B1.1 TELECOM DIST ASSESSMENT - BLDG 154A BASEMENT

154A-TN-0B1.11 ENLARGED TELECOM REMODEL PLAN - BLDG 154A BASEMENT

154A-TN-011 TELECOM REMODEL PLAN - BLDG 154A FIRST FLOOR

154A-TN-011.1 TELECOM DIST ASSESSMENT - BLDG 154A FIRST FLOOR

169-TN-011 TELECOM REMODEL PLAN - BLDG 169

169-TN-011.1 TELECOM DISTANCE ASSESSMENT - BLDG 169

170-TN-011 TELECOM REMODEL PLAN - BLDG 170

170-TN-011.1 TELECOM DISTANCE ASSESSMENT - BLDG 170

171-TN-011 TELECOM REMODEL PLAN - BLDG 171 FIRST FLOOR

SHEET NO. SHEET NAME

16-MD-011 MECHANICAL DEMOLITION PLAN - BUILDING 16

20-MD-011 MECHANICAL DEMOLITION PLAN - BUILDING 20

141-MD-0B1 MECHANICAL DEMOLITION PLAN - BUILDING 141 BASEMENT

141-MD-011 MECHANICAL DEMOLITION PLAN - BUILDING 141 FLOOR 1

141-MD-021 MECHANICAL DEMOLITION PLAN - BUILDING 141 FLOOR 2

141-MD-031 MECHANICAL DEMOLITION PLAN - BUILDING 141 FLOOR 3

141-MD-300 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 141

141-MD-301 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 141

154-MD-0B1 MECHANICAL DEMOLITION PLAN - BUILDING 154 - BASEMENT

154-MD-011 MECHANICAL DEMOLITION PLAN - BUILDING 154 - FLOOR 1

154-MD-021 MECHANICAL DEMOLITION PLAN - BUILDING 154 - FLOOR 2

154-MD-031 MECHANICAL DEMOLTION PLAN - BUILDING 154 - FLOOR 3

154-MD-041 MECHANICAL DEMOLTION PLAN - BUILDING 154 - FLOOR 4

154-MD-300 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 154

154-MD-301 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 154

154-MD-302 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 154

154-MD-303 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 154

154-MD-304 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 154

154-MD-305 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 154

154A-MD-0B1 MECHANICAL DEMOLITION PLAN - BUILDING 154A -BASEMENT

154A-MD-011 MECHANICAL DEMOLITION PLAN - BUILDING 154A - FLOOR 1

154A-MD-021 MECHANICAL DEMOLITION PLAN - BUILDING 154A - ROOF

154A-MD-300 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 154A

154A-MD-301 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 154A

169-MD-011 MECHANICAL DEMOLITION PLAN - BUILDING 169 - FLOOR 1

169-MD-021 MECHANICAL DEMOLITION PLAN - BUILDING 169 - ROOF

169-MD-300 MECHANICAL DEMOLITION ENLARGED PLANS - BUILDING 169

170-MD-011 MECHANICAL DEMOLITION PLAN - BUILDING 170

MECHANICAL REMODEL

SHEET NO. SHEET NAME

MG - 001 MECHANICAL LEGEND AND ABBREVIATIONS

MG - 002 MECHANICAL SCHEDULES

MG - 003 MECHANICAL SCHEDULES

MG - 004 MECHANICAL SEQUENCE OF OPERATIONS AND CONTROLS

MG - 005 MECHANICAL DETAILS

MG - 006 MECHANICAL DETAILS

MG - 007 MECHANICAL DETAILS

MG - 008 MECHANICAL SITE PLAN

16-MH-011 MECHANICAL REMODEL PLAN - BUILDING 16

020-MH-011 MECHANICAL REMODEL PLAN - BUILDING 20

141-MH-0B1 MECHANICAL REMODEL PLAN - BUILDING 141 BASEMENT

141-MH-011 MECHANICAL REMODEL PLAN - BUILDING 141 FLOOR 1

141-MH-021 MECHANICAL REMODEL PLAN - BUILDING 141 FLOOR 2

141-MH-031 MECHANICAL REMODEL PLAN - BUILDING 141 FLOOR 3

141-MH-100 MECHANICAL REMODEL ENLARGED PLANS - BUILDING 141

141-MH-101 MECHANICAL REMODEL ENLARGED PLANS - BUILDING 141

154-MH-0B1 MECHANICAL REMODEL PLAN - BUILDING 154 - BASEMENT

154-MH-011 MECHANICAL REMODEL PLAN - BUILDING 154 - FLOOR 1

154-MH-021 MECHANICAL REMODEL PLAN - BUILDING 154 - FLOOR 2

154-MH-031 MECHANICAL REMODEL PLAN - BUILDING 154 - FLOOR 3

154-MH-041 MECHANICAL REMODEL PLAN - BUILDING 154 - FLOOR 4

154-MH-100 MECHANICAL REMODEL ENLARGED PLANS - BUILDING 154

154-MH-101 MECHANICAL REMODEL ENLARGED PLANS - BUILDING 154

154-MH-102 MECHANICAL REMODEL ENLARGED PLANS - BUILDING 154

154-MH-103 MECHANICAL REMODEL ENLARGED PLANS - BUILDING 154

154-MH-104 MECHANICAL REMODEL ENLARGED PLANS - BUILDING 154

154-MH-105 MECHANICAL REMODEL ENLARGED PLANS - BUILDING 154

154-MH-400 BUILDING 154 DATA ROOM VENTILATION SECTIONS

154A-MH-0B1 MECHANICAL REMODEL PLAN - BUILDING 154A - BASEMENT

154A-MH-011 MECHANICAL REMODEL PLAN - BUILDING 154A - FLOOR 1

154A-MH-021 MECHANICAL REMODEL PLAN - BUILDING 154A - ROOF

154A-MH-100 MECHANICAL REMODEL ENLARGED PLAN - BUILDING 154A

169-MH-011 MECHANICAL REMODEL PLAN - BUILDING 169 - FLOOR 1

169-MH-021 MECHANICAL REMODEL PLAN - BUILDING 169 - ROOF

169-MH-100 MECHANICAL REMODEL ENLARGED PLANS - BUILDING 169

170-MH-011 MECHANICAL REMODEL PLAN - BUILDING 170

SHEET NO. SHEET NAME

00-GI-000.2 COVER AND PROJECT GENERAL INFORMATION VOLUME 2

00-GI-001 INDEX OF DRAWINGS

GENERAL

SHEET NO. SHEET NAME

141-SF-100 BUILDING 141 STRUCTURAL FRAMING

154-SF-100 BUILDING 154 STRUCTURAL FRAMING

154A-SF-100 BUIILDING 154A STRUCTURAL FRAMING

STRUCTURAL

APPLICABLE CODES AND ORDINANCES ENERGY CODE - BUILDING ENVELOPE

2021 NFPA 101, LIFE SAFETY CODE

2022 NFPA 13, STANDARD FOR THE INSTALL ACTION OF SPRINKLER SYSTEMS

2020 NFPA 25, STANDARD FOR THE INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS

2020 NFPA 70, NATIONAL ELECTRICAL CODE

2022 NFPA 72, NATIONAL FIRE ALARM AND SIGNALING CODE

2020 NFPA 75, STANDARD FOR THE FIRE PROTECTION OF INFORMATION TECHNOLOGY EQUIPMENT

2021 INTERNATIONAL BUILDING CODE (IBC) WHERE NFPA 101 AND ASSOCIATED DOCUMENTS ARE SILENT

2021 INTERNATIONAL ENERGY CONSERVATION CODE

2021 INTERNATIONAL FIRE CODE (IFC), WHERE NFPA STANDARDS AND CODES ARE SILENT

2021 INTERNATIONAL MECHANICAL CODE (IMC)

2021 INTERNATIONAL FUEL GAS CODE (IFGC)

2021 UNIFORM PLUMBING CODE

2009 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES (ICC/ANSI 117.1)

PER 2018 IECC TABLE C402.2:

INSULATION ENTIRELY ABOVE DECKROOFS

METAL FRAMEDWALLS, ABOVE GRADE

BELOW- GRADE WALLWALLS, BELOW GRADE

UNHEATED SLABSSLAB- ON- GRADE FLOORS

SWINGING

OPAQUE DOORS

REQUIRED PROVIDED

ROLL- UP OR SLIDING

MONTANA- CLIMATE ZONE XX

R-30ci

R-13 + R-7.5ci

R-7.5ci

R-10 FOR 24" BELOW

U-0.37

R-4.75

R-30ci (MIN.)

R-22 + R-7.5ci

R-7.5ci

R-15 TO T.O. FOUNDATION

U-0.37

R-4.75

BUILDING ELEMENT

FIXED FENESTRATION

OPERABLE FENESTRATION

ENTRANCE DOORS

U-0.36; SHGC-0.40

U-0.43; SHGC-0.40

U-0.77; SHGC-0.40

U-0.33 MIN; GLAZING SHGC 0.27 MIN

N/A

U-0.33 MIN;GLAZING SHGC 0.27 MIN

2018 INTERNATIONAL ENERGY CODE SUMMARIES AND REFERENCE SECTIONS BELOW ARE PROVIDED FOR CONVENIENCE ONLY . IT IS THE CONTRACTORS RESPONSIBILITY TO UNDERSTAND AND MEET THE REQUIREMENTS OF THE 2018 INTERNATIONAL ENERGY CODE

C402.4 AIR LEAKAGE (MANDATORY)

THE THERMAL ENVELOPE OF BUILDINGS SHALL COMPLY WITH SECTIONS C402.4.1 THROUGH C402.4.8

C402.4.1 AIR BARRIERS

A CONTINUOUS AIR BARRIER SHALL BE PROVIDED THROUGHOUT THE BUILDING THERMAL ENVELOPE.

C402.4.1.1 AIR BARRIER CONSTRUCTION

1. THE AIR BARRIER SHALL BE CONTINUOUS FOR ALL ASSEMBLIES THAT ARE THE THERMAL ENVELOP OF THE BUILDING AND

ACROSS THE JOINTS AND ASSEMBLIES.

2.AIR BARRIER JOINTS AND SEAMS SHALL BE SEALED, INCLUDING SEALING TRANSITIONS IN PLACES AND CHANGES IN

MATERIALS.

3. RECESSED LIGHTING FIXTURES AND OTHER SIMILAR INSTALLED OBJECTS WHICH PENETRATE THE AIR BARRIER SHALL

COMPLY WITH SECTION C402.4.8

EXCEPTION: BUILDINGS THAT COMPLY WITH SECTION C402.4.1.2.3 ARE NOT REQUIRED TO COMPLY WITH ITEMS 1 AND 3

C402.4.1.2.3 BUILDING TEST

THE COMPLETED BUILDING SHALL BE TESTED AND THE AIR LEAKAGE RATE OF THE BUILDING ENVELOPE SHALL NOT EXCEED 0.40 cfm/ft² AT A PRESSURE DIFFERENTIAL OF 0.3 INCHES WATER GAUGE (2.0l/s*m² AT 75 Pa) IN ACCORDANCE WITH ASTM E779 OR AN

EQUIVALENT METHOD APPROVED BY THE CODE OFFICIAL.

C402.4.2 AIR BARRIER PENETRATIONS

A CONTINUOUS AIR BARRIER SHALL BE PROVIDED THROUGHOUT THE BUILDING THERMAL ENVELOPE.

ACCESSIBILITY

VA BARRIER FREE DESIGN STANDARD, PAGE 18-13

ARCHITECTURAL BARRIERS ACT ACCESSIBILITY STANDARDS (ABAAS)

SECTION 1103 SCOPING REQUIREMENTS - 1103.1 WHERE REQUIRED.

SITES, BUILDINGS, STRUCTURES, FACILITIES, ELEMENTS AND SPACES, TEMPORARY OR PERMANENT, SHALL BE

ACCESSIBLE TO PERSONS WITH PHYSICAL DISABILITIES.

EXCEPTIONS:

1103.2.3 EMPLOYEE WORK AREAS. SPACES AND ELEMENTS WITHIN EMPLOYEE WORK AREAS SHALL ONLY BE

REQUIRED TO

COMPLY WITH SECTION 907.5.2.3.2, 1007, AND 1104.3.1 AND SHALL BE DESIGNED AND CONSTRUCTION SO THAT

INDIVIDUALS

WITH DISABILITIES CAN APPROACH, ENTER, AND EXIT THE WORK AREAS.

1103.2.8 LIMITED ACCESS SPACES. NONOCCUPIABLE SPACES ACCESSED ONLY BY LADDERS, CATWALKS, CRAWLSPACES, FREIGHT ELEVATORS OR VERY NARROW PASSAGEWAYS ARE NOT REQUIRED TO BE ACCESSIBLE.

1103.2.9 EQUIPMENT SPACES. SPACES FREQUENTED ONLY BY PERSONNEL FOR MAINTENANCE, REPAIR OR

MONITORING OF

EQUIPMENT ARE NOT REQUIRED TO BE ACCESSIBLE.

2203.2.15 WALK IN COOLERS AND FREEZERS. WALK IN COOLERS AND FREEZERS INTENDED FOR EMPLOYEE USE

ONLY ARE NOT REQUIRED TO BE ACCESSIBLE.

SECTION 1104 ACCESSIBLE ROUTES - 1104.5 LOCATION.

ACCESSIBLE ROUTES SHALL COINCIDE WITH OR BE LOCATED IN THE SAME AREA AS A GENERAL CIRCULATION PATH.

WHERE

THE CIRCULATION PATH IS INTERIOR, THE ACCESSIBLE ROUTE SHALL ALSO BE INTERIOR. WHERE ONLY ONE

ACCESSIBLE

ROUTE IS PROVIDED, THE ACCESSIBLE ROUTE SHALL NOT PASS THROUGH KITCHENS, STORAGE ROOMS, RESTROOMS, CLOSETS, OR SIMILAR SPACES.

1105.1 PUBLIC ENTRANCES.

IN ADDITION TO ACCESSIBLE ENTRANCES REQUIRED BY SECTION 1105.1.1 THROUGH 1105.1.6, AT LEAST 60 PERCENT

OF ALL

PUBLIC ENTRANCES SHALL BE ACCESSIBLE.

EXCEPTIONS: LOADING AND SERVICE ENTRANCES THAT ARE NOT THE ONLY ENTRANCE TO A TENANT SPACE.

1105.1.6 TENANT SPACES.

AT LEAST ONE ACCESSIBLE ENTRANCE SHALL BE PROVIDED TO EACH TENANT.

SECTION 1106 PARKING AND PASSENGER LOADING FACILITIES - 1106.1 REQUIRED.

WHERE PARKING IS PROVIDED, ACCESSIBLE PARKING SPACES SHALL BE PROVIDED IN COMPLIANCE WITH TABLE

1106.1, EXCEPT AS REQUIRED BY SECTION 1106.2 THROUGH 1106.4.

1106.6 LOCATION.

ACCESSIBLE PARKING SPACES SHALL BE LOCATED ON THE SHORTEST ACCESSIBLE ROUTE OF TRAVEL FROM

ADJACENT

PARKING TO AN ACCESSIBLE BUILDING ENTRANCE.

SECTION 1108 SPECIAL OCCUPANCIES - 1108.2 ASSEMBLY AREA SEATING.

A BUILDING, ROOM OR SPACE USED FOR ASSEMBLY PURPOSED WITH FIXED SEATING SHALL COMPLY WITH SECTION 1108.2.1 THROUGH 1108.2.5. PER 1108.2.2.1 GENERAL SEATING. WHEELCHAIR SPACES SHALL BE PROVIDED IN ACCORDANCE

WITH TABLE 1108.2.2.1.

SECTION 1110 SIGNAGE - 1110.1 SIGNS.

REQUIRED ACCESSIBLE ELEMENTS SHALL BE IDENTIFIED BY THE INTERNATIONAL SYMBOL OF ACCESSIBILITY AT THE FOLLOWING LOCATIONS: ACCESSIBLE PARKING SPACES, PASSENGER LOADING ZONES, ROOMS, ENTRANCES, CHECK-OUT AISLES, FAMILY OR ASSISTED-USE TOILET AND BATHING ROOMS, AREAS OF REFUGE, AND EXTERIOR AREAS. IN ADDITIONAL 1110.2 DIRECTIONAL SIGNAGE. DIRECTIONAL SIGNAGE INDICATING THE ROUTE TO THE NEAREST LIKE ACCESSIBLE ELEMENT SHALL BE PROVIDED AT THE FOLLOWING LOCATIONS STATED IN 1110.2 AND

INCLUDE THE INTERNATIONAL SYMBOL OF ACCESSIBILITY.

1110.4 VARIABLE MESSAGE SIGNS - TRANSPORTATION FACILITIES.

WHERE PROVIDED IN TRANSPORTATION FACILITIES, VARIABLE MESSAGE SIGNS CONVEYING TRANSPORTATION-

RELATED INFORMATION SHALL COMPLY WITH SECTION 1110.4

1. IT IS THE CONTRACTOR'S RESPONSIBILITY TO FAMILIARIZE HIMSELF/ HERSELF WITH THE

SCOPE OF WORK.

2. THE DEMOLITION NOTES PROVIDE A GENERAL DESCRIPTION OF THE ITEMS AND AREAS

REQUIRING REMOVAL. THE CONTRACTOR SHALL FIELD VERIFY ACTUAL QUANTITIES AND

LOCATIONS OF ALL INDICATED ITEMS AS NECESSARY TO COMPLETE THE SCOPE OF WORK

IN ACCORDANCE WITH THE CONTRACT DOCUMENTS.

3. COORDINATE WITH OWNER FOR ANY EQUIPMENT TO BE SALVAGED. UNLESS SPECIFICALLY

SCHEDULED FOR REUSE, DEMOLISHED MATERIALS SHALL BECOME THE POSSESSION OF

THE CONTRACTOR AND SHALL BE IMMEDIATELY REMOVED FROM THE SITE.

4. REMOVE MATERIALS FROM SITE AND DISPOSE OF IN A LEGAL AND ENVIRONMENT

FRIENDLY MANNER PER VA GUIDELINES AT NO ADDITIONAL EXPENSE TO OWNER

5. DEBRIS FROM THE DEMOLITION SHALL NOT BE ALLOWED TO ACCUMULATE WITHIN THE

BUILDING OR ON THE SITE. ALL DEBRIS IS TO BE REMOVED, AT MINIMUM ONCE PER SHIFT

DURING THE DESIGNATED TIMES.

6. REMOVE FROM SITE ANY CONTAMINATED, VERMIN INFESTED, OR DANGEROUS MATERIALS

ENCOUNTERED AND DISPOSE OF BY SAFE MEANS SO AS NOT TO ENDANGER HEALTH OF

WORKERS AND PUBLIC.

7. BURNING OF MATERIALS ON SITE IS NOT PERMITTED.

8. CLEAN-UP: MUST MEET GOVERNING DUST CONTROL CODES AND STANDARDS.

9. NOTIFY AFFECTED UTILITY COMPANIES BEFORE STARTING WORK AND COMPLY WITH THEIR

REQUIREMENTS.

10. PREVENT MOVEMENT OR SETTLEMENT OF ADJACENT STRUCTURES. PROVIDE BRACING

AND SHORING.

11. CARRY OUT DEMOLITION WORK TO CAUSE AS LITTLE INCONVENIENCE TO ANY ADJACENT

OCCUPIED BUILDING OR SITE AS POSSIBLE AND WITH MINIMUM INTERFERENCE TO PUBLIC

OR PRIVATE ACCESSES. MAINTAIN PROTECTED EGRESS AND ACCESS AT ALL TIMES.

12. CONTRACTOR SHALL PROVIDE TEMPORARY DUST AND CONSTRUCTION SEPARATION

WALLS AS REQUIRED TO SHIELD THE PUBLIC FROM NOISE, DUST, WEATHER, AND OTHER

HAZARDS THAT MAY BE EXPOSED AS A RESULT OF THE DEMOLITION WORK.

SEE SPECIFICATION SECTION 01 35 26 FOR DETAILS AND DEMOLITION DRAWINGS FOR

LOCATIONS.

13. PERFORM CUTTING OF EXISTING CONCRETE AND MASONRY WITH SAWS AND CORE DRILLS.

DO NOT USE JACK-HAMMERS EXCEPT WHERE PERMITTED AND APPROVED BY COR.

14. BREAK CONCRETE AND MASONRY INTO SECTIONS LESS THAN 3 FEET IN ANY DIMENSION.

15. CONTRACTOR SHALL TAKE ALL NECESSARY PRECAUTIONS TO INSURE EXISTING

STRUCTURAL ELEMENTS REMAIN UNDAMAGED THROUGHOUT CONSTRUCTION, UNLESS

SPECIFICALLY NOTED ON DEMOLITION PLAN. IT IS THE SOLE RESPONSIBILITY OF THE

CONTRACTOR TO IDENTIFY AND PROVIDE ANY SHORING, BRACING, OR TEMPORARY

STRUCTURE, AND TO COORDINATE WITH STRUCTURAL ENGINEER AS REQUIRED.

16. ALL PUBLIC UTILITIES ARE TO REMAIN IN OPERATION THROUGHOUT CONSTRUCTION.

CONTRACTOR TO COORDINATE ANY TEMPORARY SERVICES REQUIRED TO MAINTAIN

BUSINESS OPERATIONS WITH THE COR.

17. SEE ENGINEERING DRAWINGS FOR DUCTWORK, DIFFUSER, PLENUM BOX, ETC. DEMOLITION

AND/OR PROTECTION. COORDINATE WITH MECHANICAL ENGINEER. ANY EARTHWORK

REQUIRES A THIRD PARTY LOCATE.

18. FIRE SAFETY MUST BE MAINTAINED FOR ALL PERSONNEL WORKING ON THE FLOOR. ALL

FIRE STAIRS, ALARMS, SPEAKERS, ETC. MUST REMAIN ACCESSIBLE AND OPERABLE AT ALL

TIMES. CONTRACTOR SHALL MAKE NECESSARY PROVISIONS TO PROTECT THIS

EQUIPMENT. IMMEDIATELY NOTIFY COR, BUILDING SECURITY AND BUILDING MANAGER OF

DAMAGED OR DISABLED SYSTEMS AND REPAIR OR REPLACE DAMAGED SYSTEMS

IMMEDIATELY AS DIRECTED AND TO THE SATISFACTION OF THE COR. RELOCATION OF

SMOKE DETECTORS, PUBLIC ADDRESS SPEAKERS AND FIRE ALARM EQUIPMENT,

NECESSITATED BY NEW CONSTRUCTION, SHALL BE ACCOMPLISHED AS A FIRST PRIORITY,

AND PER THE PLANS.

19. IF ANY QUESTIONS ARISE AS TO THE REMOVAL OF ANY MATERIAL, CLARIFY THE POINT IN

QUESTION WITH THE COR BEFORE PROCEEDING. IMMEDIATELY STOP WORK IF

HAZARDOUS MATERIALS ARE FOUND AND CONTACT THE COR.

20. SEE TELECOMMUNICATION DRAWINGS FOR REMOVAL OF ANY EQUIPMENT, CABLING

SWITCHES, AND CONDUIT PERTAINING TO DATA/COMMUNICATIONS AND TELEPHONE.

VERIFY WITH TELEPHONE COMPANIES, SERVICE OWNER OR TENANT

DATA/COMMUNICATIONS REPRESENTATIVE AS REQUIRED TO PREVENT NEW

CONSTRUCTION DELAYS.

21. PROVIDE FOR FIRE PROOFING REPAIR AS REQUIRED, TO THE ORIGINAL RATING WHERE

CONSTRUCTION TRADES REMOVE EXISTING FIRE PROOFING. REPAIR ANY DAMAGE OR

PENETRATIONS IN RATED ASSEMBLIES TO CONFORM TO THEIR ORIGINAL LISTING

REQUIREMENTS AND TO MAINTAIN FIRE PROTECTION AND SEPARATION AS ORIGINALLY

DESIGNED.

22. AT COMPLETION OF DEMOLITION WORK, THE CONSTRUCTION AREA(S) SHALL BE LEFT IN

CLEAN, ORDERLY CONDITION. ALL DEBRIS AND MISCELLANEOUS MATERIAL SHALL BE

REMOVED.

23. CONTRACTOR SHALL BE RESPONSIBLE FOR PATCHING AND/OR REPAIRING ANY AND ALL

DAMAGE CAUSED BY OR IN CONJUNCTION WITH THE "WORK". REFINISH TO MATCH

EXISTING ADJACENT FINISH, OR AS NOTED HEREIN.

24. FOR AREAS NOT IN DEMOLITION SCOPE OF WORK, PROTECT AS REQUIRED, ALL SURFACES, EQUIPMENT, FIXTURES AND HARDWARE DURING DEMOLITION AND/OR CONSTRUCTION.

25. PRIOR TO DEMOLITION, INVESTIGATE WALLS FOR CONCEALED PIPING AND/OR OTHER

UTILITIES OR SERVICES AND INFORM COR OF ANY CONDITION NOT DOCUMENTED IN

CONTRACT DRAWINGS. DEMO DESIGNATED WALL BASES, WALL FRAMING, BATT

INSULATION AND GYPSUM BOARD. DEMO CONDUITS AND RECEPTACLES, REFERENCE

ELECTRICAL DEMO PLAN FOR ADDITIONAL INFORMATION.

26. ALL EXISTING DIRECTIONAL SIGNAGE TO BE REMOVED UNLESS NOTED OTHERWISE.

27. WHERE NOTED, REMOVE FLOORING DOWN TO TOP OF CONC. SLAB, INCLUDING

ADHESIVES, TRANSITION STRIPS, AND OTHER ASSOCIATED ELEMENTS, TYP., UNLESS

NOTED OTHERWISE. PREPARE REMAINING SURFACES TO RECEIVE NEW FINISHES.

DEMOLITION NOTES

HAZARDOUS MATERIALS NOTES

1. REFER TO STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS FOR ADDITIONAL

INFORMATION. ALL INFORMATION REGARDING EXISTING CONDITIONS IS BASED UPON

OWNER-SUPPLIED DOCUMENTS AND MAY NOT PRECISELY REFLECT FIELD CONDITIONS.

2. PROVIDE ALL BACKING FOR MILLWORK, GRAB BARS, AND ANY AND ALL WALL MOUNTED

EQUIPMENT OR ACCESSORIES; COORDINATE LOCATIONS.

3. ALL DIMENSIONS ARE FROM STRUCTURAL OR UNFINISHED FACE OF STUD, UNLESS

OTHERWISE NOTED.

4. PROVIDE A SMOOTH AND LEVEL FINISH FLOOR, TYP. PATCH AND REPAIR ALL

INCONSISTENCIES IN FLOOR ELEVATIONS.

5. PATCH AND REPAIR ANY / ALL WALL SURFACES AS REQUIRED TO PROVIDE SUITABLE

SUBSTRATE FOR FINISHES.

6. REFER TO DOOR AND FRAME SCHEDULE FOR DOORS REQUIRING ADA ACCESS CONTROL.

7. PROVIDE ACOUSTICAL SEALANT AROUND WALL EDGES, TOP AND BOTTOM, AND

PENETRATIONS, AND INSTALL PUTTY PADS AROUND ELECTRICAL BOXES WHERE

PARTITION CONTAINS ACOUSTICAL INSULATION.

8. ALL TELECOMMUNICATION ROOMS ARE TO HAVE EXPOSED STRUCTURE UNLESS NOTED

OTHERWISE, NO CEILINGS SPECIFIED.

FLOOR PLAN NOTES

REFLECTED CEILING PLAN NOTES

1. REFER TO ELECTRICAL SHEETS FOR FIXTURE TYPES, SWITCHING, AND SPECIAL SYSTEMS.

2. REFER TO MECHANICAL SHEETS FOR DIFFUSER AND DUCTING LAYOUTS.

3. REFERENCE EXTERIOR FINISH LEGEND FOR EXTERIOR PAINT COLORS; REFERENCE FINISH

SCHEDULE FOR INTERIOR PAINT COLORS AND FINISH.

1. THE CONTRACTOR SHALL REMOVE ALL HAZARDOUS MATERIALS AS NECESSARY TO

FULFILL THE DEMOLITION AND CONSTRUCTION REQUIREMENTS OF THIS PROJECT.

2. THE CONTRACTOR SHALL PREPARE AN ABATEMENT PLAN IN ACCORDANCE WITH THE

REQUIREMENTS OF THE MONTANA DEPARTMENT OF ENVIRONMENTAL QUALITY. THIS

PLAN MUST BE COORDINATED WITH THE FINDINGS IN THE HAZARDOUS MATERIALS

SURVEY.

1. PRESSURE INDICATOR MUST BE AT -0.01 OR MORE NEGATIVE PRESSURE (VERIFY

TWICE A DAY IN WRITING AND SUBMIT TO COR) - IF NOT, VERIFY ALL OPENINGS (SUCH

AS DOORS) ARE CLOSED AND/OR CHANGE OUT NEGATIVE AIR PRE-FILTER. METER

MUST READ CONTINUOUSLY.

2. CONTRACTOR SHALL DEVELOP A DAILY CHECK LIST FOR CONSTRUCTION

OVERSIGHT TUNED TO THE QUALITY ASSURANCE PLAN WHICH CAPTURED MOST

ERRORS. THIS MAY EVOLVE TO A LIVING DOCUMENT PENDING ISSUES

ENCOUNTERED.

3. REFER TO SPEC SECTION 01 35 26 AND DEMOLITION DRAWINGS FOR ICRA

REQUIREMENTS BASED ON DURATION / EXTENT OF WORK AND RISK FACTOR

INFECTION CONTROL NOTES

U.S. Department of Veterans Affairs

PROJECT NUMBER

BUILDING NUMBER

DRAWING NUMBER

PROJECT TITLE

LOCATION

ISSUE DATE CHECKED BY DRAWN BY

DRAWING TITLE

APPROVED:

VA FORM 08 - 6231

A

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PHASE

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

FLS

PROGRAM

CONTRACTING

ACTIVITY

CENTRAL (PCAC)

B

IM

/2

V

A M e d ic a l C e n te r

F t H a rr is o n

M T

/2

G e n e ra l In fo r2

.r v t

/2

/2

:2

:4

P

M

00-GI-002

PROJECT CODE SUMMARY /

PROJECT GENERAL NOTESGDM

1000 W STEUBEN ST. UNIT 3

BINGEN, WA 98605

541.436.4723

ADAM GODDIN, PE

A&E DESIGN

124 NORTH 29TH STREET, #100

BILLINGS, MONTANA 59101

406.248.2633

T. MARCELLO PIERROTTET, AIA

EHRM INFRASTRUCTURE

UPGRADES

FORT HARRISON, MONTANA

436-21-700

GEN INFO

Project Director

JPRTMP05/20/2022

100% CONSTRUCTION

DOCUMENTS

ARCHITECTA/E:

NOTE:

1. ALL WORK TO BE CONDUCTED IN DESIGNATED CLASS IV AND V AREAS AS INDICATED IN DRAWINGS, IS TO BE…