AtmosAir BPI Schedule_Canton Courthouse.pdf
PDF 88 KB Posted
- Attached to
- Courthouse Mechanical Equipment
- Solicitation number
- CME0911
- Issued by
- Wayne County, Michigan
About this file
This document is a Dielectric Barrier Discharge (DBD) Bipolar Ionization (BPI) Schedule for the Canton Courthouse, detailing specifications for air handling units AHU-1 and AHU-2. The schedule outlines the installation of two AtmosAir 500FC DBD Bi-Polar Ionization units, each designed to handle 16,000 CFM, powered by 120V electrical systems. The units will be installed in the supply plenum or ductwork, downstream of all filtration, to ensure active cleaning of breathing zones, following manufacturer installation and operation manual recommendations.
The technical specifications indicate each unit consumes minimal electrical power, with 0.6 watts/amps per unit for AHU-2 and 0.6 watts/amps for AHU-1. The systems feature a dynamic DBD selection switch that allows commissioning personnel to adjust capacity based on actual space conditions. The Dielectric Barrier Discharge technology uses a tube design to generate ionization and distribute it radially into a large volume, fast-moving air stream, providing an advanced air purification solution for the courthouse's HVAC system.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CH-1 Scroll - Technical Data Sheet.pdf | ||
| CH-1 Scroll - Air-Cooled Chiller Drawings.pdf | ||
| D35 - ITB - Mechanical.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ELEC Watts/Amps per unit
AHU-1 16,000 *DBD BI-POLAR IONIZATION AtmosAir 500FC 2 120V 0.6 AHU-2 16,000 *DBD BI-POLAR IONIZATION AtmosAir 500FC 2 120V 0.6
GENERAL NOTES
(1) AtmosAir systems are dielectric barrier discharge (DBD) bipolar ionization units.
* Dielectric Barrier Discharge bipolar ionization uses a tube design to generate ionization and distribute it in a radial fashion into a large volume fast movin
DBD-1
DBD-2
(2) DBD BPI units shall be installed in the supply plenum or ductwork, downstream of all filtration to ensure active cleaning of the breathing zones. Installation shall follow manufacturer recommendations per installation/operation manuals.
(3) Units have have a dynamic DBD selection switch to allow commissioning to adjust capacity to conditions found within the actual space.
DBD BPI SCHEDULE - Canton Courthouse IDENTIFICATION Tag Est. CFM BPI TYPE MODEL NUMBER System
Qty
UNIT ELEC
ng air stream.
File details come from the government source that posted it. Updated .