ATC-SCIF Cameras SOO combined (Updated).pdf

Statement of Objectives

23d Operations Support Squadron

Moody AFB ATC Bldg 1300 Video Surveillance System

1.0 Scope

The 23d Operations Support Squadron (OSS) has a requirement to have a surveillance system installed in building 1300. Vendor will be required to install 2 new cameras in and outside of building 1300: 1 camera outside the first-floor entryway, and 1 camera outside the tower cab entryway. System must not have wi-fi. Vendors will be required to provide all necessary parts, equipment, and software, and will provide installation and training for the newly installed system. Would also like a warranty on purchased items and a maintenance plan if feasible to mitigate downtime for system. Must be hardwired. We need closed circuit television to monitor the ATC Tower entry points. Vendor will be responsible for providing 1 monitor, 2 cameras, software systems, conduits, cables and all necessary components for camera installation and software system installation to cover the necessary areas.

2.0 Minimum Requirements

2.1 The facility should have a type of CCTV or Security Surveillance System in place for observation.

2.2 All cameras shall be connected to a central control/monitor to be located in the Air Traffic Control Tower (ATCT) Cab.

2.3 Vendor is responsible for providing all necessary racks, cabling, servers, and other equipment to include those items identified in the solicitation.

2.4 The system must provide complete coverage outside the main entryway of the bottom floor, and outside the Tower Cab entryway on the 7th Floor.

2.5 System components (including hardware and software) shall be compatible with and authorized for use in the facility.

3.0 Installation

3.1 Vendor will be required to provide installation of all parts and equipment for the provided

System.

3.2 Building 1300 contains existing infrastructure. Vendor will be required to use the existing drilled holes in the wall, remove the old cable and route new cable in existing wall tunnel holes.

3.3 Vendor will not have any exposed wiring or make any additional holes or modifications to the building without prior coordination.

3.4 Installation will be conducted Monday – Friday, during the hours of 8:00 am – 5:00 pm EST. Vendors must always be escorted while working within building 1300.

5.0 Warranty

5.1 The Vendor warrants all hardware and software, including parts and troubleshooting equipment, against defects in materials and workmanship for a period of five (5) years from the date of delivery ("Warranty Period").

5.2 The Vendor's liability under this warranty is limited to repairing or replacing, at its sole discretion, any defective equipment. This warranty does not cover defects or damage caused by:

• Normal wear and tear.

• Misuse, abuse, negligence, or accident.

• Unauthorized modification or repair.

• Improper installation or maintenance.

• Use in violation of the documentation provided with the equipment.

5.3 The Vendor will provide warranty maintenance services during the Warranty Period to ensure product reliability. Such services may include, but are not limited to, troubleshooting, repair, and replacement of defective parts. The Vendor will undertake commercially reasonable efforts to minimize any disruption to the Purchaser's operations during the performance of warranty maintenance.

--------------------------------------------------------//BREAK//---------------------------------------------------------

Statement of Objectives

Moody AFB BLDG 1506 CCTV Upgrade

1.0 Scope

The 820 Combat Operations Squadron (COS) Intelligence Section has a requirement to upgrade the camera system. Vendor will be required to install 3 or 4 new cameras in and outside of building 1506. A 4K Security Camera System; 3 or 4 cameras to cover the secure area locations and the outside door. 4K security cameras wired with person vehicle detection, 8MP/4K 8 CH

NVR with 2TB HDD for recording. System must not have wi-fi, or 2-way talk. The system is for a classified working area. Must be hardwired; IR, RF, or audio communications are prohibited DoDM

5105.21-V1. We need closed circuit television to monitor the SCIF entry points. Vendor will be responsible for providing two monitors, 3 or 4 cameras, software systems, conduits, cables and all necessary components for camera installation and software system installation to cover the necessary areas.

Vendor will be required to ensure cameras in building 1506 connect and are compatible with the vendor’s software. Vendor will be required to use the existing drilled holes in the wall, remove the old cable and route new cable in existing wall tunnel holes. The hub for the camera system will be installed in room 102 in Bldg 1506 next to the special security representative (SSR). See Attachment 1, BLDG 1506 CCTV

Layout.

2. Minimum requirements for building camera installation

2.1 Building 1506

2.1.1 A minimum of two monitors, 3 or 4 new cameras will be installed throughout the building with one outside viewing the front door: the others viewing the hallways

NOTE

3 or 4 Cameras: We anticipate only a third camera is needed for coverage of the hallway highlighted in yellow on the (SCIF) Camera Layout but if a fourth is deemed necessary to provide full coverage, then it will be considered.

2.1.2 The vendor will provide all necessary cables, hardware and electrical connections to ensure that the cameras are working properly and connected to the system in in the secure room in building 1506

2.1.3 The vendor is required to ensure the new cameras in the building must be functional and connected to the vendor’s software.

2.1.4 The new camera system wiring will need to follow the predrilled wiring pathways in the building.

The existing system will all be replaced with new system so no compatibility of software should be needed.

3. Installation

3.1 Vendor will be required to provide the two monitors, 3 or 4 cameras, conduits, cables, software and other hardware required for a working camera system.

3.2 Vendor will be required to use the existing drilled holes in the wall, remove the old cable and route new cable in existing wall tunnel holes. Must be able to view all installed cameras at the hub installed in building 1506.

3.3 Vendor will be required to coordinate a date and time for installation. Venders must be escorted at all times in the secure working area.

4. Warranty

4.1 The Vendor warrants all hardware and software, including parts and troubleshooting equipment, against defects in materials and workmanship for a period of five (5) years from the date of delivery

("Warranty Period").

4.2 The Vendor's liability under this warranty is limited to repairing or replacing, at its sole discretion, any defective equipment. This warranty does not cover defects or damage caused by:

Normal wear and tear.

Misuse, abuse, negligence, or accident.

Unauthorized modification or repair.

Improper installation or maintenance.

Use in violation of the documentation provided with the equipment.

4.3 The Vendor will provide warranty maintenance services during the Warranty Period to ensure product reliability. Such services may include, but are not limited to, troubleshooting, repair, and replacement of defective parts. The Vendor will undertake commercially reasonable efforts to minimize any disruption to the Purchaser's operations during the performance of warranty maintenance.