Appendix C (Low-Risk )-Final Approved ( Dated 24 March 2021) for the Titan Atlas 3D Printer With Installation Training.pdf

24 March 2021

CONTRACT SAFETY APPENDIX C

“LOW RISK”

For

TITAN ATLAS 3D PRINTER WITH INSTALLATION & TRAINING

Safety Requirements A. Preface

1. Commander’s Safety Intent: The safety of everyone on Tinker AFB is our top priority.

All Individuals must accept personal responsibility for safety and seek opportunities for improving the safety of our work environment. Everyone working on Tinker AFB is challenged to find, fix (if able), and report all hazards and near-misses. It is our shared duty to take every reasonable step and precaution to prevent accidents and preserve the health/safety of each Contractor and Government employee.

2. Speak Out for Safety (SOS): Safety surety is an integral part of our overall goal for establishing a world class safety and health program. Our “Speak Out for Safety” initiative Our “Speak Out for Safety” initiative is a partnership with the Contractor’s and the Government’s employees, that was developed to further enhance safety, in order to ensure that we are looking out for all of our partners and empowers all employees to actively participate in each other’s safety.

A safe workplace is everyone's business. As part of the contract team, military, civilian and Contractor personnel are empowered to Speak Out for Safety (S.O.S.) when they observe unsafe acts that present imminent danger to personnel or catastrophic damage to property.

The Government encourages our employees to intervene to ensure continued safe operations.

B. Mishap Notification

1. The Contractor shall cooperate with all Government mishap investigations.

The Contractor shall support and comply with the safety investigation and reporting requirements of Air Force Instruction (AFI) 91-204, Safety Investigations and Reports.

The Contractor shall assist with mishap support. In the event of a mishap, the Contractor shall take reasonable and prudent action to establish control of the accident or mishap scene, prevent further damage to persons or property, and preserve evidence. Both prompt verbal and written notification, electronic mail is acceptable, shall be provided to the Government Point of Contact, (GPOC), within one (1) hour of the event, sooner, if possible. At a minimum, mishap notifications shall contain, the following information:

a. Contract, contract number, name and title of person(s) reporting

b. Date, time and exact location of accident/incident

c. Brief narrative of accident/incident (Events leading to accident/incident)

d. Cause of accident/incident, if known

e. Name of personnel involved in accident/incident

f. Corrective actions (taken or proposed)

g. Other pertinent information

2. The Contractor shall provide copies of Contractor data, as necessary to support the Government investigation; such as Contractor analyses, summaries of investigations, etc.

C. General Safety Requirements:

1. If the Safety Plan is modified, the Contractor shall submit the proposed modification, in writing, to the GPOC. The GPOC will forward a copy of the Safety Plan upon receipt to the applicable Safety Office, located on Tinker AFB, OK.

2. The Contractor shall be solely responsible for compliance with all of the following items: Federal, State and local laws, the Occupational, Safety and Health Act (OSHA) (Public Law 91-596) and the resulting standards. Additionally, the Contractor is responsible for the safety and health of all their employees, Sub-Contractor’s employees, and the public, if applicable.

3. The Contractor shall ensure assigned personnel are adequately trained and qualified for the task being performed and brief all personnel on the hazards involved with operations and applicable precautions to be taken. Should unidentified hazards arise, cease operations until actions are taken to eliminate or mitigate hazards to safe levels.

4. The Contractor shall establish a system to identify, correct and document unsafe conditions and acts related to their contract work.

5. The Contractor shall establish a system to report unsafe or hazardous conditions caused by elements out of their control (for example, public or DoD personnel adjacent process or work activity and so forth) to the CO or GPOC.

6. Compliance with OSHA and other applicable laws and regulations for the protection of Contractor employees shall exclusively be the obligation of the Contractor.

The Government will assume no liability or responsibility for the Contractor's compliance or non-compliance with such requirements. The Contractor shall brief employees on the safety requirements of this contract and on hazards associated with prescribed tasks. In addition, the Contractor shall be required to communicate safety requirements/specification to all Sub-Contractors, if applicable. This contract shall in no way require persons to work in surroundings or under working conditions that are unsafe or dangerous to their health. The Contractor shall coordinate and perform work so as not to impact the safety of Government employees or cause damage to Government property or to the public. Contractor employees shall utilize personal protective equipment and associated safety equipment when necessary.

D. Specific Requirements:

The Contractor’s safety program shall clearly define procedures, personnel qualifications, facilities and required equipment necessary to fulfill the following elements as to the type of work being performed within the scope of the contract.

Element/Requirement Reference

OSHA Standards for General Industry 29 CFR 1910

OSHA Standards for Construction 29 CFR 1926

Air Force Occupational Safety, Fire, AFMAN 91-203 and Health Standards

The US Air Force Traffic Safety Program AFI 91-207

TAFBSUP; Air Force Motor Vehicle Traffic AFMAN 31-116

Supervision

Fire Prevention-Fire Protection Program TAFBI 32-2001

USAF Explosive Safety Manual AFMAN 91-201

E. Safety Plan:

1. The Contractor shall develop a written site–specific plan for implementing the following:

OSHA standards and any contract Safety and Occupational Health (SOH) requirements.

The Contractor shall submit the plan to the GPOC for acceptance within 10 days after contract award. Safety and health plans should include the following:

a. An activity hazard analysis of the significant hazards to life, limb, and property inherent in the specific contract work performance and a plan for controlling these hazards.

b. Designation of the Contractor personnel primarily responsible for safety and health at the project site.

c. A description of how the Contractor’s safety duties will be performed on the project. At a minimum, these duties will consist of the following:

A pre-work review of appropriate activity hazard analysis, to be reviewed with each worker.

Regular safety training for the workforce.

Frequent and regular compliance checks on contract safety requirements by the Contractor and the Sub-Contractor’s workforce.

Daily records that provide factual evidence of quality control activities for safety performance which state that the following items/areas were assessed: the results, and any instructions or corrective actions.

Specific elements of an audit program by the prime Contractor should include onsite inspection of Sub-Contractors, method of determining mishap rates, and traceability of hazards.