Appendix B - bench design.pdf
PDF 315 KB Posted
- Solicitation number
- Not on record
- Issued by
- Luzerne County, Pennsylvania
About this file
This is a technical design specification document for a 6-foot Euro AD bench with 2 V-bars manufactured by Tolar Manufacturing Company, Inc., for installation in Corpus Christi, Texas, in support of the Lancaster County Transportation Authority (LCTA) Engineering RFP #26-07-001 for Bus Stop Improvements in Pennsylvania. The bench design document contains front, side, and top view schematics at a scale of 3/4"=1'-0" with detailed dimensional specifications. The document outlines structural requirements including recycled grey plastic slats (3), custom aluminum extrusions (6063-T5 alloy), acrylic graphic panels (1/8" thickness x 24" x 73-3/4"), and seat delineators (2). All structural steel shall comply with ASTM A-36 standards with a minimum yield strength of 36,000 PSI, and all aluminum members shall conform to alloy 6063-T5 or greater specifications.
The document establishes mandatory fabrication and welding standards requiring compliance with American Welding Society standards D1.1-10 for steel and D1.2-08 for aluminum, with specific electrode classifications (AWS 5.1 Class E70S-5 for steel and AWS/SFA 5.10 Class ER4043 for aluminum). All welding must be performed at Tolar Manufacturing Company, Inc.'s facility, and contractors are required to verify all dimensions and details on-site, reporting discrepancies to Tolar Manufacturing before commencing work. The design and drawings remain the intellectual property of Tolar Manufacturing and are protected by law, with all documents subject to return upon project completion. Concrete pad sizes are provided as standard minimum requirements for reference and may require reinforcement or enlargement based on local codes and loading conditions.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FRONT VIEW
SCALE 3/4"=1'-0"
SIDE VIEW
SCALE 3/4"=1'-0"
TOP VIEW
SCALE 3/4"=1'-0"
A A
B B
DESCRIPTION
CUSTOMER/VENDOR
MATL.
SCALE
SIZE
DATE
DRAWN BY:
DWG NO.
TOLAR MANUFACTURING COMPANY, INC
258 Mariah Circle, Corona CA. 92879
REV
6' EURO AD BENCH W/ 2 V-BARS
CORPUS CHRISTI, TX
B
VARIES
35787
NOTED
5/19/2020
RFarr
T:\Inventor\Benches\35787.idw
THE DESIGN AND DRAWINGS REMAIN THE
INTELLECTUAL PROPERTY OF TOLAR MFG.
AND ARE PROTECTED BY LAW. THEY MAY
NOT BE ALTERED, REPRODUCED OR USED
FOR FABRICATION WITHOUT EXPRESSED
WRITTEN CONSENT FROM TOLAR MFG.
ALL DOCUMENTS TO BE RETURNED TO
TOLAR MFG.. AT COMPLETION OF WORK.
CONTRACTOR TO SITE VERIFY ALL DETAILS
AND DIMENSIONS AND REPORT ANY AND
ALL DISCREPANCIES TO TOLAR MFG..
BEFORE COMMENCING WITH THAT RELATED
PORTION OF THE WORK.
DURABILITY WITH DISTINCTION
TOLAR
GENERAL NOTES:
1. ALL STRUCTURAL STEEL, UNLESS OTHERWISE NOTED, SHALL BE
ASTM A-36, MINIMUM YIELD STRENGTH 36,000 PSI.
2. ALL STRUCTURAL ALUMINUM MEMBERS, UNLESS OTHERWISE
NOTED, SHALL BE OF ALLOY 6063-T5 OR GREATER.
3. ALL HOLES TO BE DRILLED OR PUNCHED.
4. STEEL WELDING SHALL CONFORM TO AMERICAN WELDING SOCIETY
STANDARD D1. 1-10. ELECTRODES SHALL CONFORM TO AWS 5.1,
CLASS E70S-5.
5. ALUMINUM WELDING SHALL CONFORM TO AMERICAN WELDING
SOCIETY STANDARD D1. 2-08. ELECTRODES SHALL CONFORM TO
AWS/SFA 5.10 CLASS ER4043.
6. ALL WELDING TO BE DONE AT TOLAR MANUFACTURING COMPANY,
INC. FACILITY.
7. ALL CORPORATE PROCEDURES, INCLUDING FABRICATION, MUST BE
IN COMPLIANCE WITH TOLAR MANUFACTURING CO. INC'S QUALITY
CONTROL MANUAL.
8. THE CONCRETE PAD SIZES SHOWN ARE STANDARD MINIMUM
REQUIREMENTS AND ARE FOR REFERENCE ONLY. THE PAD MAY
NEED TO BE REINFORCED OR ENLARGED DEPENDING ON LOCAL
CODES AND LOADING CONDITIONS.
45 1/4
71 1/2
23 3/4
45 1/4
100°
14 1/2
21 13/16
1 7/8
2 15/16
RECYCLED GREY PLASTIC SLATS (3)
GRAPHIC SIZE: 23-1/2 X 71-1/2
VIEWING SIZE: 22 X 69
ACYRLIC SIZE: 1/8 THK X 24 X 73-3/4
SEAT DELINEATOR (2)
CUSTOM ALUM. EXTRUSION
6063-T5
File details come from the government source that posted it. Updated .