APPENDIX A - Specifications.pdf
PDF 86 KB Posted
- Solicitation number
- N4215826Q0022
About this file
This is an appendix to a federal contract solicitation for Grade D Air Compressor & Regenerative Air Dryer Rental that establishes interface requirements for rental equipment hook-up to Naval Nuclear Submarine Base (NNSY) temporary service infrastructure.
All rental equipment delivered to NNSY must be supplied with specified interface connectors to enable installation by NNSY Shop personnel. Mechanical service connections require 2" Male NPT inlet and outlet fittings. For electrical service, the appendix prescribes connector specifications organized by voltage and amperage requirements. For 110-120 VAC service manufactured by Duraline: equipment rated 20 amps or less requires a 3-foot tail of 12/3 cable with 3MT20 crowsfoot plug; equipment over 20 amps up to 50 amps requires 3-foot tail of 6/3 cable with 3MT50 crowsfoot plug. For 440 VAC service also manufactured by Duraline: equipment 20 amps or less requires 3-foot tail of 12/4 cable with 4MT20 crowsfoot plug; over 20 amps up to 50 amps requires 3-foot tail of 6/4 cable with 4MT50 crowsfoot plug. For 440 VAC service 50-100 amps manufactured by Crouse Hinds: equipment requires 3-5 foot length of 2/4 cable with male camlock twist connectors with specified part numbers for brass and black, white, and red sleeves. For service over 100 amps up to 225 amps and over 225 amps up to 400 amps, the appendix specifies 3/0 and 500 MCM cable specifications respectively with corresponding camlock connector part numbers. NNSY Shop retains authority to evaluate specific equipment for any additional cabling and connector requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment - N4215826Q00220001.pdf | ||
| Solicitation - N4215826Q0022.pdf | ||
| TECHNICAL CAPABILITY - FORM.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Grade D Air Compressor & Regenerative Air Dryer Rental
APPENDIX “A”
Interface Requirements
For Rental Equipment Hook-up To NNSY Temporary Service
NOTE: All Rental Equipment received by NNSY must be supplied with proper interface connectors shown below to allow hook-up by NNSY Shop. There may be specific equipment that will require NNSY Shop evaluation to determine proper cabling and connectors.
Mechanical Service: Shall have 2” Male NPT inlet and outlet connections.
110-120 VAC Service: Material Manufactured by Duraline 20 Amp or less- 3 foot tail of 12/3 cable w/3MT20 crowsfoot plug Over 20 Amp and up to 50 Amp : 3 foot tail of 6/3 cable w/3MT50 crowsfoot plug
440 VAC Service: Material Manufactured by Duraline 20 Amp or less- 3 foot tail of 12/4 cable w/ 4MT20 crowsfoot plug Over 20 Amp and up to 50 Amp- 3 foot tail of 6/4 cable w/ 4MT50 crowsfoot plug Above can also be used on 220VAC Any service over 50 Amp requires box cable
440 VAC 50-100 Amp Service: Material manufactured by Crouse Hinds 50- 100 Amps 3-5 foot length of 2/4 cable w/male camlock twist connectors:
Part Numbers:
Brass -A200036-2 Black Sleeve- A200706-7 White Sleeve- A200706-12 Red Sleeve-A200706-9
Over 100 and up to 225 Amps: 3- 5 foot length of 3 conductor 3/0 cable with camlock connectors:
Part Numbers:
Brass - A200038-2 Black Sleeve- A2000706-13 White Sleeve-A2000706-18 Red Sleeve- A2000706-15
Over 225 and up to 400 Amps: 5-15 length of 500 MCM cable w/camlock connectors:
Part Numbers:
Brass- A20028-2 Black Sleeve-A200056- White Sleeve-A200056-6 Red Sleeve- A200056-3
Grade D Air Compressor & Regenerative Air Dryer Rental
File details come from the government source that posted it. Updated .