AK17001933.pdf
PDF 1 MB Posted
- Solicitation number
- W912CH-25-R-0219
- Issued by
-
Department of the Army
About this file
Summary of Special Packaging Instruction for Ground Hop Kit
This document is a DD Form 2169, Special Packaging Instruction, for the Ground Hop Kit, Part Number 57K7985 (CAGE Code 19207), with National Stock Number 2590-01-700-1933. The instruction sheet, effective 28 July 2022 (Revision A), provides detailed packaging requirements for a kit containing 23 line items including wiring harnesses, electrical leads, hose assemblies, guards, and fasteners destined for military use. The unit pack weighs 245.0 pounds and measures 52.3 x 26.8 x 20.5 inches with a cubic volume of 16.628 cubic feet.
The packaging procedure requires segregation of components into 13 distinct packs (numbered 1-13, with pack 11 divided into 11A and 11B) following MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Most items are individually sealed with NAS847 caps or plugs, bagged in MIL-DTL-117 Type III Class B plastic, and placed into corrugated containers specified in Table 1. Large components such as wiring harnesses undergo coiling to specific dimensions before bagging. A consolidation box combines smaller items (packs 13-23) containing miscellaneous hardware and supplies. All segregated packs are then assembled into a final shipping container (Container M) constructed of 1/2-inch plywood with beveled skids per ASTM D6251. A packing list identifying items and their corresponding segregated pack numbers must accompany the shipment in accordance with MIL-STD-129. Quality assurance includes inspection per MIL-STD-2073-1 and MIL-STD-1186 with applicable container specifications.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| First Article Waiver Worksheet.pdf | ||
| PRICE EVALUATION SPREADSHEET.xlsx | XLSX spreadsheet | |
| EH5C0781EH LPTA -Technical Information Questionnaire (TIQ).docx | DOCX document | |
| W912CH25R0219 Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BM
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED
FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.
.57K7985 (19207) GROUND HOP KIT 19207 AK17001933
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
28 JULY 2022 A
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
001 NONE 245.0 16.628 52.3 X 26.8 X 20.5
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD 10
13. CLEANING
MIL-STD-2073-1
14. DRYING
MIL-STD-2073-1
15. PACKING
a. LEVEL A
MIL-STD-2073-1 & NOTE AA
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129 AND NOTE AB
17. NOTES/DRAWING
A. QUALITY ASSURANCE PROVISIONS:
1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.
2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER
SPECIFICATION.
B. GROUND HOP KIT, P/N 57K7985, CONTAINS THE FOLLOWING ITEMS:
SPN QTY CAGE PART NUMBER DESCRIPTION
1 1 19207 12584208 WIRING HARNESS (3W70EXT)
2 1 19207 12584236 WIRING HARNESS (3W1EXT1)
3 1 19207 12584237 WIRING HARNESS (3W1EXT2)
4 1 19207 12584238 WIRING HARNESS (3W73EXT)
5 1 19207 12584239 WIRING HARNESS (3W72EXT)
6 1 19207 12584240 ELECTRICAL LEAD (1W472EXT)
7 1 19207 12584241 ELECTRICAL LEAD (3W78EXT)
8 1 19207 12381627 WIRING HARNESS (3W61EXT)
9 1 19207 14005087 WIRING HARNESS (3W86EXT)
10 1 19207 12652552 WIRING HARNESS (3W18EXT)
11 2 19207 12298167 HOSE ASSEMBLY, GROUND HOP KIT
12 1 19207 12652456 GUARD, PTO YOKE
13 1 19207 12308310 GUARD, TURBOCHARGER INLET
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 7 Pages
2590-01-700-1933
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.
57K7985 (19207) GROUND HOP KIT 19207
4. NATIONAL STOCK NO. 6. REVISION 5. DATE
17. NOTES/DRAWING (Continued)
SPN QTY CAGE PART NUMBER DESCRIPTION
15 2 80204 AEW24X50N000BD6A91 WASHER, FLAT
17 1 80204 B1821BH050C150N SCREW, CAP, HEX HEAD
19 1 80205 MS35338-143 WASHER, LOCK, 1/2
21 1 96906 MS35690-810 NUT, PLAIN, HEX
22 AR 81343 MS3367-2-9 STRAP, TIEDOWN
23 AR 58536 AA55809-A5C1 TAPE
TABLE 1: CONTAINER SIZES
ITEM DESCRIPTION SIZE QTY PART NUMBER
A CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 17-1/4 X 16-1/2 X 5 1 12584208
B CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 16-1/4 X 16-1/4 X 3-3/4 1 12584236
C CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 11 X 11 X 3-1/4 1 12584237
D CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 16 X 16 X 6-1/4 1 12584238
E CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 16-1/4 X 16-1/4 X 5 1 12584239
F CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 15-1/2 X 15-1/2 X 4 2 12584240, 12584241
G CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 15-1/4 X 13-1/4 X 3-3/4 1 12381627
H CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 20-1/4 X 20-1/4 X 4-3/4 1 14005087
J CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 10-1/4 X 10-1/4 X 3-1/4 1 12584244
K CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 16-3/4 X 12-3/4 X 2-1/2 2 12298167
L CONTAINER: ASTM D5118, ST RSC,
TY CF, CL WR, VAR SW, GR W5c 6 X 6 X 10 2 12308288, CONSOLIDATION BOX
M CONTAINER: ASTM D6251,
ST A, TY III, CL 2 49-3/4 X 18 X 20-3/4 1
DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 7 Pages
2590-01-700-1933 A
28 JULY 2022
AK17001933
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.
57K7985 (19207) GROUND HOP KIT 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
28 JULY 2022
17. NOTES/DRAWING (Continued)
C. PREPARE ONE WIRING HARNESS (3W70EXT), P/N 12584208 IN ACCORDANCE WITH THE STEPS BELOW:
1. SEAL ALL CONNECTORS ON THE WIRING HARNESS WITH NAS847 CAPS OF THE APPROPRIATE SIZE.
2. COIL THE WIRING HARNESS TO AN APPROXIMATE SIZE OF 16-3/4 X 16 X 4-3/4.
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 22 X 24. CLOSURE SHALL BE BY HEAT SEAL.
4. PLACE BAGGED ITEM INTO CONTAINER A. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “1”.
6. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
D. PREPARE ONE WIRING HARNESS (3W1EXT1), P/N 12584236 IN ACCORDANCE WITH THE STEPS BELOW:
1. SEAL ALL CONNECTORS ON THE WIRING HARNESS WITH NAS847 CAPS OF THE APPROPRIATE SIZE.
2. COIL THE WIRING HARNESS TO AN APPROXIMATE SIZE OF 15-3/4 X 15-3/4 X 3-1/2.
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 21 X 22. CLOSURE SHALL BE BY HEAT SEAL.
4. PLACE BAGGED ITEM INTO CONTAINER B. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “2”.
6. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
E. PREPARE ONE WIRING HARNESS (3W1EXT2), P/N 12584237 IN ACCORDANCE WITH THE STEPS BELOW:
1. SEAL ALL CONNECTORS ON THE WIRING HARNESS WITH NAS847 CAPS OF THE APPROPRIATE SIZE.
2. COIL THE WIRING HARNESS TO AN APPROXIMATE SIZE OF 10-1/2 X 10-1/2 X 3.
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 15 X 16. CLOSURE SHALL BE BY HEAT SEAL.
4. PLACE BAGGED ITEM INTO CONTAINER C. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “3”.
6. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
F. PREPARE ONE WIRING HARNESS (3W73EXT), P/N 12584238 IN ACCORDANCE WITH THE STEPS BELOW:
1. SEAL ALL CONNECTORS ON THE WIRING HARNESS WITH NAS847 CAPS OF THE APPROPRIATE SIZE.
2. COIL THE WIRING HARNESS TO AN APPROXIMATE SIZE OF 15-1/2 X 15-1/2 X 6.
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 23 X 24. CLOSURE SHALL BE BY HEAT SEAL.
4. PLACE BAGGED ITEM INTO CONTAINER D. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “4”.
6. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
G. PREPARE ONE WIRING HARNESS (3W72EXT), P/N 12584239 IN ACCORDANCE WITH THE STEPS BELOW:
1. SEAL ALL CONNECTORS ON THE WIRING HARNESS WITH NAS847 CAPS OF THE APPROPRIATE SIZE.
2. COIL THE WIRING HARNESS TO AN APPROXIMATE SIZE OF 15-3/4 X 15-3/4 X 4-3/4.
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 22 X 23. CLOSURE SHALL BE BY HEAT SEAL.
4. PLACE BAGGED ITEM INTO CONTAINER E. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “5”.
6. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 7 Pages
2590-01-700-1933 A
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.
57K7985 (19207) GROUND HOP KIT 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
28 JULY 2022
17. NOTES/DRAWING (Continued)
H. PREPARE ONE ELECTRICAL LEAD (1W472EXT), P/N 12584240 IN ACCORDANCE WITH THE STEPS BELOW:
1. CUSHIONING: A-A-59135, CL 2, GR A, SIZE: 6 X 6, QTY: 2. CUSHION BOTH ENDS OF THE ELECTRICAL
LEAD. SECURE WITH TAPE.
2. COIL THE ELECTRICAL LEAD TO AN APPROXIMATE SIZE OF 15 X 15 X 3-3/4
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 20 X 21. CLOSURE SHALL BE BY HEAT SEAL.
4. PLACE BAGGED ITEM INTO CONTAINER F. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “6”.
6. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
I. PREPARE ONE ELECTRICAL LEAD (3W78EXT), P/N 12584241 IN ACCORDANCE WITH THE STEPS BELOW:
1. CUSHIONING: A-A-59135, CL 2, GR A, SIZE: 6 X 6, QTY: 2. CUSHION BOTH ENDS OF THE ELECTRICAL
LEAD. SECURE WITH TAPE.
2. COIL THE ELECTRICAL LEAD TO AN APPROXIMATE SIZE OF 15 X 15 X 3-3/4.
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 20 X 21. CLOSURE SHALL BE BY HEAT SEAL.
4. PLACE BAGGED ITEM INTO CONTAINER F. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “7”.
6. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
J. PREPARE ONE WIRING HARNESS (3W61EXT), P/N 12381627 IN ACCORDANCE WITH THE STEPS BELOW:
1. SEAL ALL CONNECTORS ON THE WIRING HARNESS WITH NAS847 CAPS OF THE APPROPRIATE SIZE.
2. COIL THE WIRING HARNESS TO AN APPROXIMATE SIZE OF 14-3/4 X 12-3/4 X 3-1/2.
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 18 X 21. CLOSURE SHALL BE BY HEAT SEAL.
4. PLACE BAGGED ITEM INTO CONTAINER G. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “8”.
6. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
K. PREPARE ONE WIRING HARNESS(3W86EXT), P/N 14005087 IN ACCORDANCE WITH THE STEPS BELOW:
1. SEAL ALL CONNECTORS ON THE WIRING HARNESS WITH NAS847 CAPS OF THE APPROPRIATE SIZE.
2. COIL THE WIRING HARNESS TO AN APPROXIMATE SIZE OF 19-3/4 X 19-3/4 X 4-1/2.
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 26 X 27. CLOSURE SHALL BE BY HEAT SEAL.
4. PLACE BAGGED ITEM INTO CONTAINER H. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “9”.
6. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
L. PREPARE ONE WIRING HARNESS (3W18EXT), P/N 12652552 IN ACCORDANCE WITH THE STEPS BELOW:
1. SEAL ALL CONNECTORS ON THE WIRING HARNESS WITH NAS847 CAPS OF THE APPROPRIATE SIZE.
2. COIL THE WIRING HARNESS TO AN APPROXIMATE SIZE OF 9-3/4 X 9-3/4 X 3.
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 14 X 15. CLOSURE SHALL BE BY HEAT SEAL.
4. PLACE BAGGED ITEM INTO CONTAINER J. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “10”.
6. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 4 of 7 Pages
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.
57K7985 (19207) GROUND HOP KIT 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
28 JULY 2022
17. NOTES/DRAWING (Continued)
N. PREPARE TWO HOSE ASSEMBLY, P/N 12298167 IN ACCORDANCE WITH THE STEPS BELOW:
1. SEAL THE ENDS OF BOTH HOSE ASSEMBLIES WITH NAS847 PLUGS OF THE APPROPRIATE SIZE.
2. COIL EACH HOSE ASSEMBLY TO AN APPROXIMATE SIZE OF 16-1/4 X 12-1/4 X 2-1/4.
3. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 16 X 21, QTY: 2. PLACE EACH HOSE ASSEMBLY IN ITS OWN BAG.
CLOSURES SHALL BE BY HEAT SEAL.
4. PLACE EACH BAGGED ITEM INTO THEIR OWN BOX. USE CONTAINER K FOR EACH ITEM. SEE TABLE 1 ON
PAGE 2. CLOSE BOXES USING METHOD 2B6 OF ASTM D1974.
5. IDENTIFICATION: IDENTIFY THE PACKS AS SEGREGATED PACK NUMBERS “11A” AND “11B”.
6. INSPECTION: INSPECT SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
O. PREPARE ONE GUARD, PTO YOKE, P/N 12652456 IN ACCORDANCE WITH THE STEPS BELOW:
1. CUSHIONING: A-A-59135, CL 1, GR A, SIZE: 17 X 11 X 1/4, SECURE WITH TAPE.
2. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 10 X 13. CLOSURE SHALL BE BY HEAT SEAL.
3. PLACE BAGGED ITEM INTO CONTAINER L. SEE TABLE 1 ON PAGE 2. CLOSE BOX USING METHOD 2B6 OF
ASTM D1974.
4. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “12”.
5. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
P. PREPARE ONE GUARD, TURBOCHARGER INLET, P/N 12308310 IN ACCORDANCE WITH THE STEPS BELOW:
1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 9 X 10. CLOSURE SHALL BE BY HEAT SEAL.
2. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “13”.
3. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
Q. PREPARE TWO WASHER, FLAT, P/N AEW24X50N000BD6A91 IN ACCORDANCE WITH THE STEPS BELOW:
1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 4. CLOSURE SHALL BE BY HEAT SEAL.
2. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “15”.
3. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
R. PREPARE ONE SCREW, CAP, HEX HEAD, P/N B1821BH050C150N IN ACCORDANCE WITH THE STEPS BELOW:
1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 4. CLOSURE SHALL BE BY HEAT SEAL.
2. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “17”.
3. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
S. PREPARE ONE WASHER, LOCK, 1/2, P/N MS35338-143 IN ACCORDANCE WITH THE STEPS BELOW:
1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 4. CLOSURE SHALL BE BY HEAT SEAL.
2. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “19”.
3. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
T. PREPARE ONE NUT, PLAIN, HEX, P/N MS35690-810 IN ACCORDANCE WITH THE STEPS BELOW:
1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 4. CLOSURE SHALL BE BY HEAT SEAL.
2. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “21”.
3. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
U. PREPARE STRAP, TIEDOWN, P/N MS3367-2-9, QTY AS REQD, IN ACCORDANCE WITH THE STEPS BELOW:
1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 5 X 15. CLOSURE SHALL BE BY HEAT SEAL.
2. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “22”.
3. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 5 of 7 Pages
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.
57K7985 (19207) GROUND HOP KIT 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
28 JULY 2022
V. PREPARE TAPE, P/N AA55809-A5C1, QTY AS REQD IN ACCORDANCE WITH THE STEPS BELOW:
1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 6 X 7. CLOSURE SHALL BE BY HEAT SEAL.
2. IDENTIFICATION: IDENTIFY THE PACK AS SEGREGATED PACK NUMBER “23”.
3. INSPECTION: INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 31.
W. CONSOLIDATE SEGREGATED PACKS “13” THROUGH “23” FROM NOTES “P” TO “V” IN ACCORDNCE WITH
THE STEPS BELOW:
1. PLACE BAGGED ITEMS INTO CONTAINER L. SEE TABLE 1 ON PAGE 2. CLOSE THE BOX USING METHOD
2B6 OF ASTM D1974.
2. IDENTIFICATION: IDENTIFY THE PACK AS “CONSOLIDATION BOX”.
3. INSPECTION: INSPECT THE PACK IN ACCORDANCE WITH THE CRITERIA FOR METHOD 10.
X. CONTAINER M IS CONSTRUCTED OF 1/2-INCH PLYWOOD AND 1-INCH THICK NOMINAL SOLID LUMBER.
ATTACH BEVELED SKIDS AND INTERMEDIATE SKID IN ACCORDANCE WITH ASTM D6251. SEE PAGE 7.
Y. PLACE SEGREGATED PACK NUMBERS “1” TO “12” FROM NOTES “C” TO “O” INTO CONTAINER M AS SHOWN
ON PAGE 7.
Z. PLACE “CONSOLIDATION BOX” FROM NOTE “W” INTO CONTAINER M AS SHOWN ON PAGE 7.
AA. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
AB. PROVIDE A PACKING LIST WITH THE UNIT PACK IN ACCORDANCE WITH MIL-STD-129. ON THE PACKING
LIST, IDENTIFY THE ITEMS WITHIN EACH SEGREGATED PACK TOGETHER WITH THEIR SEGREGATED
PACK NUMBER.
DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 6 of 7 Pages
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.
57K7985 (19207) GROUND HOP KIT 19207
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
28 JULY 2022
17. NOTES/DRAWING (Continued)
ARRANGE BOXED ITEMS INTO CONTAINER M AS SHOWN.
DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 7 of 7 Pages
| SPECIAL PACKAGING INSTRUCTION |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
File details come from the government source that posted it. Updated .