077123_Gutters_and_Downspouts.docx
DOCX document 28 KB Posted
- Attached to
- Replacement of Roof
- Solicitation number
- AG-9JGP-S-15-0059
About this file
Gutters and Downspout specs
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SF30_Sol_Mod_1.doc | DOC document | |
| 077253_Roof_Accessories.docx | DOCX document | |
| Const_Est_to_19_items.xls | XLS spreadsheet | |
| AG9JGPS150059.doc | DOC document | |
| DavisBacon03-24-15.xlsx | XLSX spreadsheet | |
| SO_ROOF.pdf | ||
| 077253_SNOW_SPLITTERS.docx | DOCX document | |
| 011100-S.DOC | DOC document | |
| 074113_Preformed_Metal_Roof_Panels_SO.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
USDA FOREST SERVICE PROJECT SPECIFICATIONS
SECTION 077123
SEAMLESS GUTTERS AND DOWNSPOUTS
PART 1 - GENERAL
1.01 SUMMARY
A. This section specifies the furnishing and installation of a seamless gutter system at the Supervisor’s Office.
B. Gutters, downspout, and accessories shall meet the Architectural Aluminum Manufacturers Association (AAMA) Specification 1405.1.
C.
1.02 SUBMITTALS
A. Contractor shall provide manufacturer’s catalog data, detail sheets, or any other specifications.
PART 2 – PRODUCTS
2.01 MATERIALS
A. Aluminum gutter shall be made from a 3105-type alloy aluminum sheet with a minimum tensile strength of 24,000 psi.
B. A standard 2”x 3” downspout and type A or B elbows with a nominal 0.019” thickness shall be used. This shall also be made from a 3105-type alloy aluminum sheet with minimum tensile strength of 24,000 psi.
C. Gutter hangers, anchors, end caps, inside and outside miters, drop outlets, fasteners, and any other accessories needed shall be made available by the manufacturer.
D. Warranty: Metal rain gutter shall have a 25 year warranty and a lifetime coating warranty.
PART 3 – EXECUTION
3.01 INSTALLATION
A. Gutters and Downspouts shall be installed in accordance with manufacturer’s instructions.
| B. | Install gutters using appropriate hangers to allow normal expansion and contraction. |
| C. | All gutters shall be in continuous length for each elevation. No end laps are allowed. |
| D. | Exercise care in placing aluminum in contact with other dissimilar metals or materials that are not compatible with aluminum. |
| E. | Gutters shall slope downwards to allow flow to downspouts. |
PART 4 – PAYMENT
Measurement and payment will be in accordance with the Schedule of Items. Payment shall include full compensation for furnishing all labor, materials and equipment needed to complete the work in accordance with the drawings and specifications.
END OF SECTION 072100
GUTTERS AND DOWNSPOUTS 077123
File details come from the government source that posted it. Updated .