AG-0489-S-10-0264 WAGE DETERMINATIONS.pdf

COOS COUNTY:

General Decision Number: OR080048 01/01/2010 OR48

State: Oregon

Construction Type: Building

County: Coos County in Oregon.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Modification Number Publication Date

0 12/18/2009

1 01/01/2010

BROR0001-018 06/01/2009

Rates Fringes

BRICKLAYER.......................$ 31.07 13.70

TILE FINISHER....................$ 21.11 9.50

TILE SETTER......................$ 27.80 12.90

CARP0001-031 06/01/2007

Carpenters:

Including Cabinet installation and form work..$ 27.56 13.30

MILLWRIGHT.......................$ 28.04 13.30

CARP9001-004 06/20/2007

Rates Fringes

Acoustical Ceiling Installer

& Drywall Hanger.................$ 27.95 13.52

AG-0489-S-10-0264

RECOVERY: Coastal Tourism Infrastructure Restoration - Toilet Replacement

ELEC0932-012 01/01/2009

Rates Fringes

ELECTRICIAN......................$ 31.97 3%+12.40

ELEC0932-013 01/01/2009

Rates Fringes

ELECTRICIAN (Electrical installer alarms, low voltage wiring for alarms, low voltage wiring and telehone installation.)...................$ 23.08 11.40

* ENGI0701-025 01/01/2010

Rates Fringes

Power equipment operators:

GROUP 1.....................$ 37.27 11.50

GROUP 1A....................$ 39.13 11.50

GROUP 1B....................$ 41.00 11.50

GROUP 2.....................$ 35.64 11.50

GROUP 3.....................$ 34.65 11.50

GROUP 4.....................$ 33.71 11.50

GROUP 5.....................$ 32.60 11.50

GROUP 6.....................$ 29.61 11.50

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: CRANE: Helicopter Operator, when used in erecting work; Whirley Operator, 90 ton and over; LATTICE BOOM

CRANE: Operator 200 tons through 299 tons, and/or over 200 feet boom; HYDRAULIC CRANE: Hydraulic Crane Operator 90

AG-0489-S-10-0264

tons through 199 tons with luffing or tower attachments

GROUP 1A: HYDRAULIC CRANE: Hydraulic Operator, 200 tons and over (with luffing or tower attachment); LATTICE BOOM

CRANE: Operator, 200 tons through 299 tons, with over 200 feet boom;

GROUP 1B: LATTICE BOOM CRANE: Operator, 300 tons through 399 tons with over 200 feet boom; Operator 400 tons and over

GROUP 2: CRANE: Cableway Operator, 25 tons and over;

HYDRAULIC CRANE: Hydraulic crane operator 90 tons through

199 tons (without luffing or tower attachment);

TOWER/WHIRLEY OPERATOR: Tower Crane Operator; Whirley

Operator, under 90 tons; LATTICE BOOM CRANE: 90 through 199 tons and/or 150 to 200 feet boom; HYDRAULIC CRANE:

Hydraulic crane operator, 50 tons through 89 tons (with luffing or tower attachment); BLADE: Auto Grader;Blade

Operator-Robotic; Bulldozer: Over 120,000 lbs and above;

Bulldozer: D-10, D-11 and similar type; Loader: 120,000 lbs and above

GROUP 3: HYDRAULIC CRANE: Hydraulic crane operator, 50 tons through 89 tons (without luffing or tower attachment);

LATTICE BOOM CRANES: Lattice Boom Crane-50 through 89 tons

(and less than 150 feet boom); Bulldozer: over 70,000 lbs up to and including 120,000; Loader: 60,000 lbs and less than 120,000 lbs

GROUP 4: CRANE: Hydraulic Crane Operator, under 50 tons;

LATTICE BOOM CRANE OPERATOR: Lattice Boom Crane Operator, under 50 tons; TRACKHOE--ROBOTIC: up to and including

20,0000 lbs. with any or all attachments; BLADE: Blade

AG-0489-S-10-0264

operator; Tractor operator with boom attachment; DRILLING:

Churm Drill and Earth Boring Machine Operator; Directional

Drill Operator over 20,000 lbs pullback; CRANE: Chicago boom and similar types; Boom type lifting device, 5 ton capacity or less; Asphalt Paver; Mechanic; Bulldozer: over

20,000 lbs and more than 100 horse and up to 70,000 lbs;

Loader: 25,000 lbs and less than 60,000 lbs

GROUP 5: TRACKHOE-HYDRAULIC: up to and including 20,000 lbs.;

DRILLING: Churm Drill and Earth Boring Machine Operator;

Directional Drill Operator less than 20,000 lbs pullback;

Concrete Pumper; Concrete Paver; forlkift over 5 ton;

Bulldozer: 20,000 lbs or less, or 100 horse or less;

Loader: ruber tired type, less than 25,000 lbs

GROUP 6: LOADERS: (less than 1 cu yd.); Oiler; Crane oiler;

forklift; Broom

IRON0029-013 07/01/2009

Rates Fringes

IRONWORKER (Reinforcing and

Structural)......................$ 33.12 17.40

LABO0001-030 06/01/2008

Rates Fringes

Laborers: (Mason

Tender-Cement/Concrete)..........$ 25.75 11.25

LABO0001-031 06/01/2008

Rates Fringes

AG-0489-S-10-0264

Laborers: (Mason Tender-Brick)...$ 25.75 11.25

LABO0003-014 06/01/2008

Rates Fringes

Laborers:

GROUP 1.....................$ 24.66 11.25

GROUP 4.....................$ 26.15 11.25

GROUP 5.....................$ 21.51 11.25

LABORER CLASSIFICATIONS

GROUP 1: Form-Stripping; Demolition

GROUP 4: Grade Checker, Pipelayer

GROUP 5: Flagger

PAIN0055-024 07/01/2009

Rates Fringes

DRYWALL FINISHER/TAPER...........$ 26.31 10.63

PAIN0055-027 07/01/2009

Rates Fringes

Painters:

Brush, Roller and Spray.....$ 16.59 7.24

PAIN0740-002 07/01/2009

Rates Fringes

GLAZIER..........................$ 33.60 12.89

PLAS0082-003 06/01/2008

Rates Fringes

PLASTERER........................$ 28.46 11.61

AG-0489-S-10-0264

PLAS0555-006 06/01/2009

CEMENT MASON/CONCRETE FINISHER...$ 28.87 15.59

PLUM0290-012 04/01/2009

Rates Fringes

PIPEFITTER.......................$ 35.69 18.59

SUOR2009-032 11/09/2009

Rates Fringes

ABATEMENT WORKER:

ASBESTOS(Removal from Floors, Ceilings, Walls).................$ 18.57 0.00

ELECTRICAL INSTALLER

(Electrical Door)................$ 14.00 0.00

LABORER: Common or General......$ 14.92 0.00

OPERATOR: Backhoe...............$ 21.68 7.67

OPERATOR: Excavator.............$ 21.68 5.46

OPERATOR: Roller................$ 17.14 0.00

OPERATOR: Screed................$ 16.00 0.00

PLUMBER..........................$ 27.32 9.86

SHEETMETAL WORKER (Excluding

Metal Roofing)...................$ 29.23 4.16

SHEETMETAL WORKER (Metal Roof

Installation Only)...............$ 23.65 6.33

TRUCK DRIVER: Dump Truck........$ 16.00 0.00

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

AG-0489-S-10-0264

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29 CFR 5.5(a)(1)(ii)).

In the listing above, the "SU" designation means that rates listed under the identifier do not reflect collectively bargained wage and fringe benefit rates. Other designations indicate unions whose rates have been determined to be prevailing.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and

3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of

Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

AG-0489-S-10-0264

200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR

Part 7).

Write to:

Wage and Hour Administrator

U.S. Department of Labor

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board

(formerly the Wage Appeals Board). Write to:

Administrative Review Board

U.S. Department of Labor

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

AG-0489-S-10-0264

LANE COUNTY:

General Decision Number: OR080041 01/08/2010 OR41

State: Oregon

Construction Type: Building

County: Lane County in Oregon.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Modification Number Publication Date

0 12/18/2009

1 01/01/2010

2 01/08/2010

BROR0001-018 06/01/2009

BRICKLAYER.......................$ 31.07 13.70

TILE FINISHER....................$ 21.11 9.50

TILE SETTER......................$ 27.80 12.90

CARP0001-024 06/01/2007

Rates Fringes

Carpenters:

Excluding Form Work.........$ 27.56 13.30

* ELEC0280-013 01/01/2010

LANE (EAST OF A LINE RUNNING NORTH AND SOUTH FROM THE NORTHEAST

CORNER OF COOS COUNTY TO THE SOUTHEAST CORNER OF LINCOLN COUNTY)

Rates Fringes

ELECTRICIAN (Electrical Low

Voltage Wiring Installer and

HVAC Temperature Control

AG-0489-S-10-0264

Installation only.)..............$ 26.04 3%+$10.65

* ELEC0280-014 01/01/2010

LANE (EAST OF A LINE RUNNING NORTH AND SOUTH FROM THE NORTHEAST

CORNER OF COOS COUNTY TO THE SOUTHEAST CORNER OF LINCOLN COUNTY)

Rates Fringes

ELECTRICIAN......................$ 34.05 3%+14.43

ELEC0932-010 01/01/2009

LANE COUNTY (AREA LYING WEST OF A LINE NORTH AND SOUTH FROM THE

N.E. CORNER OF COOS COUNTY TO THE S.E. CORNER OF LINCOLN COUNTY)

Rates Fringes

ELECTRICIAN......................$ 31.97 3%+12.40

ELEC0932-011 01/01/2009

LANE COUNTY (AREA LYING WEST OF A LINE NORTH AND SOUTH FROM THE

N.E. CORNER OF COOS COUNTY TO THE S.E. CORNER OF LINCOLN COUNTY)

Rates Fringes

ELECTRICIAN (ELECTRICAL LOW

VOLTAGE WIRING INSTALLER AND

HVAC CONTROL INSTALLATION

ONLY)............................$ 23.08 11.40

ENGI0701-020 01/01/2010

Rates Fringes

Power equipment operators:

GROUP 1.....................$ 37.27 11.50

GROUP 1A....................$ 39.13 11.50

GROUP 1B....................$ 41.00 11.50

GROUP 2.....................$ 35.64 11.50

AG-0489-S-10-0264

GROUP 3.....................$ 34.65 11.50

GROUP 4.....................$ 33.71 11.50

GROUP 5.....................$ 32.60 11.50

GROUP 6.....................$ 29.61 11.50

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: CRANE: Helicopter Operator, when used in erecting work; Whirley Operator, 90 ton and over; LATTICE BOOM

CRANE: Operator 200 tons through 299 tons, and/or over 200 feet boom; HYDRAULIC CRANE: Hydraulic Crane Operator 90 tons through 199 tons with luffing or tower attachments

GROUP 1A: HYDRAULIC CRANE: Hydraulic Operator, 200 tons and over (with luffing or tower attachment); LATTICE BOOM

CRANE: Operator, 200 tons through 299 tons, with over 200 feet boom;

GROUP 1B: LATTICE BOOM CRANE: Operator, 300 tons through 399 tons with over 200 feet boom; Operator 400 tons and over

GROUP 2: CRANE: Cableway Operator, 25 tons and over;

HYDRAULIC CRANE: Hydraulic crane operator 90 tons through

199 tons (without luffing or tower attachment);

TOWER/WHIRLEY OPERATOR: Tower Crane Operator; Whirley

Operator, under 90 tons; LATTICE BOOM CRANE: 90 through 199 tons and/or 150 to 200 feet boom; HYDRAULIC CRANE:

Hydraulic crane operator, 50 tons through 89 tons (with luffing or tower attachment); BLADE: Auto Grader;Blade

Operator-Robotic; Rubber tired scraper with tandom scrapers, multi-engineTrenching Machine-Wheel Operator

GROUP 3: HYDRAULIC CRANE: Hydraulic crane operator, 50 tons through 89 tons (without luffing or tower attachment);

LATTICE BOOM CRANES: Lattice Boom Crane-50 through 89 tons

AG-0489-S-10-0264

(and less than 150 feet boom); Rubber Tired Scraper: with tandom scrapers; self loading, paddle wheel, auger type, finish and/or 2 or more units.

GROUP 4: CRANE: Hydraulic Crane Operator, under 50 tons;

LATTICE BOOM CRANE OPERATOR: Lattice Boom Crane Operator, under 50 tons; TRACKHOE-ROBOTIC: up to and including

20,0000 lbs. with any or all attachments; BLADE: Blade operator; Tractor operator with boom attachment; DRILLING:

Churm Drill and Earth Boring Machine Operator; Directional

Drill Operator over 20,000 lbs pullback; CRANE: Chicago boom and similar types; Boom type lifting device, 5 ton capacity or less; HYDRAULIC HOES: Robotic Hydraulic backhoe operator, track and wheel type up to and including

20,0000 lbs. with any or all attachments; Asphalt Paver;

Screed Operator; Rubber-Tired Scraper, single engine, single scraper; Compactor-Self Propelled; Trenching

Machine, digging capacity over 3 ft Depth.

GROUP 5: TRACKHOE-HYDRAULIC: up to and including 20,000 lbs.;

Boom truck operator; DRILLING: Churm Drill and Earth Boring

Machine Operator; Directional Drill Operator less than

20,000 lbs pullback; HYDRAULIC HOES: Hydraulic Backhoe

Operator, wheel type (Ford, John Deere, Case type);

Hydraulic Backhoe Operator track type up to and including

20,000 lbs.; Concrete Pumper; Concrete Paver: Compactor

GROUP 6: LOADERS: (less than 1 cu yd.); Roller

(Non-Asphalt); Oiler; Bobcat/Skid Loader; Grade Checker;

Crane oiler; Drill Assistant

IRON0029-011 07/01/2009

AG-0489-S-10-0264

IRONWORKER (Ornamental, Reinforcing, and Structural).....$ 33.12 17.40

LABO0001-030 06/01/2008

Rates Fringes

Laborers: (Mason

Tender-Cement/Concrete)..........$ 25.75 11.25

LABO0001-031 06/01/2008

Rates Fringes

Laborers: (Mason Tender-Brick)...$ 25.75 11.25

LABO0001-032 06/01/2008

Rates Fringes

Laborers: (Mason Tender-Stone)...$ 25.75 11.25

LABO0003-008 06/01/2008

Rates Fringes

Laborers:

GROUP 1.....................$ 24.66 11.25

GROUP 2.....................$ 25.29 11.25

GROUP 3.....................$ 25.75 11.25

GROUP 4.....................$ 26.15 11.25

LABORER CLASSIFICATIONS

GROUP 1: Form-Stripping

GROUP 2: Power Tool Operator

GROUP 3: Vibrating Plate

GROUP 4: Grade Checker, Pipelayer

AG-0489-S-10-0264

PAIN0055-023 07/01/2009

Painters:

Brush, Roller and Spray.....$ 18.59 7.24

PAIN0055-024 07/01/2009

Rates Fringes

DRYWALL FINISHER/TAPER...........$ 26.31 10.63

PAIN0740-002 07/01/2009

Rates Fringes

GLAZIER..........................$ 33.60 12.89

PLAS0082-003 06/01/2008

Rates Fringes

PLASTERER........................$ 28.46 11.61

PLAS0555-006 06/01/2009

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 28.87 15.59

PLUM0290-008 04/01/2009

Rates Fringes

Plumbers and Pipefitters.........$ 35.69 18.59

ROOF0156-003 06/01/2009

Rates Fringes

Roofers:

Excluding Metal Roof........$ 21.29 9.90

AG-0489-S-10-0264

SUOR2009-025 11/09/2009

CARPENTER (Form Work Only).......$ 21.07 7.43

LABORER: Common or General......$ 19.03 6.96

LABORER: Landscape..............$ 14.02 2.63

OPERATOR: Excavator.............$ 22.61 6.32

OPERATOR: Forklift..............$ 20.28 8.18

SHEETMETAL WORKER................$ 33.23 2.73

SPRINKLER FITTER (Fire

Sprinklers)......................$ 29.38 5.49

TRUCK DRIVER: Dump Truck........$ 15.50 9.05

TRUCK DRIVER: Water Truck.......$ 18.40 5.33

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29 CFR 5.5(a)(1)(ii)).

In the listing above, the "SU" designation means that rates listed under the identifier do not reflect collectively bargained wage and fringe benefit rates. Other designations indicate unions whose rates have been determined to be prevailing.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage

AG-0489-S-10-0264

determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and

3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

2.) If the answer to the question in 1.) is yes, then an interested party

(those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).

Write to:

Wage and Hour Administrator

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data,project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board(formerly the Wage Appeals Board). Write to:

Administrative Review Board, U.S. Department of Labor

200 Constitution Avenue, N.W., Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

AG-0489-S-10-0264

LINCOLN COUNTY:

General Decision Number: OR080055 01/01/2010 OR55

State: Oregon

Construction Type: Building

County: Lincoln County in Oregon.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Modification Number Publication Date

0 12/18/2009

1 01/01/2010

BROR0001-020 06/01/2009

Lincoln (North) County

Rates Fringes

BRICKLAYER.......................$ 32.29 14.05

TILE FINISHER....................$ 21.11 9.50

TILE SETTER......................$ 27.80 12.90

BROR0001-021 06/01/2009

Lincoln (South) County

Rates Fringes

BRICKLAYER.......................$ 31.07 13.70

TILE FINISHER....................$ 21.11 9.50

TILE SETTER......................$ 27.80 12.90

CARP0001-033 06/01/2007

Rates Fringes

Carpenters:

Cabinet installation and form work only..............$ 27.56 13.30

AG-0489-S-10-0264

CARP9001-004 06/20/2007

Acoustical Ceiling Installer

& Drywall Hanger.................$ 27.95 13.52

ELEC0932-012 01/01/2009

Rates Fringes

ELECTRICIAN......................$ 31.97 3%+12.40

ELEC0932-016 01/01/2009

Rates Fringes

ELECTRICIAN (Electrical installer alarms, low voltage wiring for alarms, low voltage wiring and telehone installation.)...................$ 23.08 11.40

* ENGI0701-025 01/01/2010

Rates Fringes

Power equipment operators:

GROUP 1.....................$ 37.27 11.50

GROUP 1A....................$ 39.13 11.50

GROUP 1B....................$ 41.00 11.50

GROUP 2.....................$ 35.64 11.50

GROUP 3.....................$ 34.65 11.50

GROUP 4.....................$ 33.71 11.50

GROUP 5.....................$ 32.60 11.50

GROUP 6.....................$ 29.61 11.50

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: CRANE: Helicopter Operator, when used in erecting work; Whirley Operator, 90 ton and over; LATTICE BOOM

CRANE: Operator 200 tons through 299 tons, and/or over 200 feet boom; HYDRAULIC CRANE: Hydraulic Crane Operator 90 tons through 199 tons with luffing or tower attachments

GROUP 1A: HYDRAULIC CRANE: Hydraulic Operator, 200 tons and over (with luffing or tower attachment); LATTICE BOOM

CRANE: Operator, 200 tons through 299 tons, with over 200 feet boom;

GROUP 1B: LATTICE BOOM CRANE: Operator, 300 tons through 399 tons with over 200 feet boom; Operator 400 tons and over

GROUP 2: CRANE: Cableway Operator, 25 tons and over;

HYDRAULIC CRANE: Hydraulic crane operator 90 tons through

199 tons (without luffing or tower attachment);

TOWER/WHIRLEY OPERATOR: Tower Crane Operator; Whirley

Operator, under 90 tons; LATTICE BOOM CRANE: 90 through 199 tons and/or 150 to 200 feet boom; HYDRAULIC CRANE:

Hydraulic crane operator, 50 tons through 89 tons (with luffing or tower attachment); BLADE: Auto Grader;Blade

Operator-Robotic; Bulldozer: Over 120,000 lbs and above;

Bulldozer: D-10, D-11 and similar type; Loader: 120,000 lbs and above

GROUP 3: HYDRAULIC CRANE: Hydraulic crane operator, 50 tons through 89 tons (without luffing or tower attachment);

LATTICE BOOM CRANES: Lattice Boom Crane-50 through 89 tons

(and less than 150 feet boom); Bulldozer: over 70,000 lbs up to and including 120,000; Loader: 60,000 lbs and less than 120,000 lbs

GROUP 4: CRANE: Hydraulic Crane Operator, under 50 tons;

LATTICE BOOM CRANE OPERATOR: Lattice Boom Crane Operator, AG-0489-S-10-0264 under 50 tons; TRACKHOE--ROBOTIC: up to and including

20,0000 lbs. with any or all attachments; BLADE: Blade operator; Tractor operator with boom attachment; DRILLING:

Churm Drill and Earth Boring Machine Operator; Directional

Drill Operator over 20,000 lbs pullback; CRANE: Chicago boom and similar types; Boom type lifting device, 5 ton capacity or less; Asphalt Paver; Mechanic; Bulldozer: over

20,000 lbs and more than 100 horse and up to 70,000 lbs;

Loader: 25,000 lbs and less than 60,000 lbs

GROUP 5: TRACKHOE-HYDRAULIC: up to and including 20,000 lbs.;

DRILLING: Churm Drill and Earth Boring Machine Operator;

Directional Drill Operator less than 20,000 lbs pullback;

Concrete Pumper; Concrete Paver; forlkift over 5 ton;

Bulldozer: 20,000 lbs or less, or 100 horse or less;

Loader: ruber tired type, less than 25,000 lbs

GROUP 6: LOADERS: (less than 1 cu yd.); Oiler; Crane oiler;

forklift; Broom

IRON0029-013 07/01/2009

Rates Fringes

IRONWORKER (Reinforcing and

Structural)......................$ 33.12 17.40

LABO0001-030 06/01/2008

Rates Fringes

Laborers: (Mason

Tender-Cement/Concrete)..........$ 25.75 11.25

LABO0001-031 06/01/2008

Rates Fringes

AG-0489-S-10-0264

Laborers: (Mason Tender-Brick)...$ 25.75 11.25

LABO0003-014 06/01/2008

Rates Fringes

Laborers:

GROUP 1.....................$ 24.66 11.25

GROUP 4.....................$ 26.15 11.25

GROUP 5.....................$ 21.51 11.25

LABORER CLASSIFICATIONS

GROUP 1: Form-Stripping; Demolition

GROUP 4: Grade Checker, Pipelayer

GROUP 5: Flagger

PAIN0055-023 07/01/2009

Rates Fringes

Painters:

Brush, Roller and Spray.....$ 18.59 7.24

PAIN0055-026 07/01/2009

Rates Fringes

DRYWALL FINISHER/TAPER...........$ 31.76 11.38

PAIN0740-002 07/01/2009

Rates Fringes

GLAZIER..........................$ 33.60 12.89

PLAS0082-003 06/01/2008

Rates Fringes

PLASTERER........................$ 28.46 11.61

AG-0489-S-10-0264

PLUM0290-012 04/01/2009

PIPEFITTER.......................$ 35.69 18.59

SUOR2009-039 11/09/2009

Rates Fringes

ABATEMENT WORKER:

ASBESTOS(Removal from Floors, Ceilings, Walls).................$ 18.57 0.00

CARPENTER, Excluding

Acoustical Ceiling

Installation, Drywall Hanging and Form Work....................$ 22.44 8.80

ELECTRICAL INSTALLER

(Electrical Door)................$ 14.00 0.00

LABORER: Common or General......$ 18.49 6.83

OPERATOR: Backhoe...............$ 21.68 7.67

OPERATOR: Excavator.............$ 21.68 5.46

OPERATOR: Roller................$ 17.14 0.00

OPERATOR: Screed................$ 16.00 0.00

PLUMBER..........................$ 27.32 9.86

SHEETMETAL WORKER (Metal Roof

Installation Only)...............$ 23.65 6.33

SHEETMETAL WORKER, excluding

Metal Roof.......................$ 29.23 4.16

TRUCK DRIVER: Dump Truck........$ 16.00 0.00

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the

AG-0489-S-10-0264

classifications listed may be added after award only as provided in the labor standards contract clauses (29 CFR 5.5(a)(1)(ii)).

In the listing above, the "SU" designation means that rates listed under the identifier do not reflect collectively bargained wage and fringe benefit rates. Other designations indicate unions whose rates have been determined to be prevailing.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and

3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction

Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party

(those affected by the action) can request review and reconsideration from

AG-0489-S-10-0264

the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR

Part 7).

Write to:

Wage and Hour Administrator

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the

Wage Appeals Board). Write to:

Administrative Review Board

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION