Addendum 1 (3-18-26).pdf
PDF 321 KB Posted
- Attached to
- Box Truck for Food Services RFP No. 25. 2526
- Solicitation number
- RFP CVS 260000001387 2
- Issued by
- Macomb County, Michigan
About this file
This is Addendum #1 to RFP No. 25.2526 issued by Chippewa Valley Schools, Clinton Township, Michigan on March 18, 2026, clarifying liftgate specifications for a box truck procurement for food services. The addendum supersedes prior language in Section C regarding liftgate requirements and establishes that bidders must propose a tuck-under liftgate only, with rail-type liftgates deemed non-responsive unless expressly approved in writing by the District. The specified basis-of-design equipment is an Anthony MTU-2500-NEW liftgate with no substitutions permitted unless listed as an exception and approved by the District. The liftgate must have a minimum 2,500-pound capacity, power-down operation with handheld remote and hard-wired curb-side rear controls including a cab cut-off switch, a 96-inch wide bolt-on extension with minimum thickness specifications, galvanized finish with ICC bumper and side steps, and grab handles on both curb-side and road-side with manufacturer-standard lighting controls. Bidders are required to acknowledge receipt of this addendum by indicating the addendum number and date on the Bid Proposal Form, page 14, in the designated "Addendum" section. All other RFP requirements and information remain unchanged from the original solicitation.
No pricing terms, set-asides, incumbent information, funding sources, or other financial details are provided in this addendum document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Box Truck for Food Services RFP 25.2526.pdf | ||
| Advertisement for RFP 25.2526.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ADDENDUM #1 | 3/18/26
Chippewa Valley Schools
19120 Cass Avenue, Clinton Township, MI 48038 Phone: (586) 723-2150 | Email: lgrayson@cvs.k12.mi.us
“Inspiring and empowering learners to achieve a lifetime of success.”
Box Truck for Food Services
RFP 25.2526
Addendum #1 – March 18, 2026
This Addendum is issued to clarify and revise Section C. Liftgate Requirements of the RFP. The District’s intent is to require a tuck-under liftgate only, consistent with the original basis-of-design specifications.
Revised Section C – Liftgate Requirements (Supersedes Prior Language)
C. Liftgate Requirements
• Type: Tuck-under liftgate only (rail-type liftgates are not acceptable).
• Basis of Design: Anthony MTU-2500-NEW (no substitutions unless listed as an exception and approved by the District).
• Capacity: Minimum 2,500 lb.
• Operation: Power-down operation
• Controls: Handheld remote, hard-wired at the curb-side rear, with cab cut-off switch.
• Extension: 96” wide bolt-on extension, minimum ¼” thickness.
• Finish / Hardware: Galvanized finish, ICC bumper, and side steps.
• Safety: Grab handles on both curb-side and road-side; lighting controls per manufacturer standards.
All other liftgate configurations, including rail-type liftgates, shall be considered non-responsive unless expressly approved as a written exception by the District.
All other information shall remain the same. Bidders shall acknowledge receipt of this Addendum by indicating the Addendum Number and Date on the Bid Proposal Form in the section titled “Addendum” on page 14.
Lillian Grayson
Purchasing & Risk Management Coordinator
File details come from the government source that posted it. Updated .