Abbeville Bypass VL Bridge.pdf

PDF 124 KB Posted Sep 2, 2026

Attached to: DOTD Bridge Grid Deck(S51)
Solicitation number: 3000026670
Issued by: Winn Parish, Louisiana

About this file

Written by GovTribe AI · Sep 3, 2026

This is a technical specification document for grid deck panel materials prepared by the Louisiana Department of Transportation and Development (DOTD) for the Abbeville Bypass Vertical Lift Bridge project located in Vermilion Parish. The document provides detailed panel specifications and installation requirements for the bridge deck system. The project specifications reference compliance with the 2026 Louisiana Standard Specifications for Roads and Bridges (LSSRB), Section 808 for general requirements and Section 811 for galvanization standards. The deck panel configuration consists of 18 total panels across varying dimensions: two panels measuring 5'-4" × 28'-9", two panels measuring 5'-4" × 24'-1", seven panels measuring 8'-0" × 28'-9", and seven panels measuring 8'-0" × 24'-1", creating a grid measuring 67'-1" in length and 52'-11" in width with 4'-8" stringer spacing.

The technical specifications detail attachment requirements using 3/4-inch countersunk bolts at 9-inch spacing intervals, with trim plates of varying depths (12" and 38") to be applied to panel sides and ends. All panels and trim plates must be galvanized per LSSRB Section 811, and main bearing bars must run perpendicular to stringers. The document is marked "Not for Construction—For Material Purchase Only" and was prepared by the Engineer of Record, Jason Michiels (License No. 36010), with a document date of June 26, 2026. The specification sheet serves as a blueprint for procurement and fabrication of materials for the bridge deck replacement or repair project.

View the file

Other files

File	Type	Posted
BABA Special Provisions(Bridge Grid Deck).docx	DOCX document	Sep 2, 2026
Louisiana Preference(2019).pdf	PDF	Sep 2, 2026
Bid Submission Instructions.pdf	PDF	Sep 2, 2026
U.S. Preference(2019).pdf	PDF	Sep 2, 2026
GF-01.pdf	PDF	Sep 2, 2026
3000026670.pdf	PDF	Sep 2, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

AutoCAD SHX Text

7 PANELS @ 8'

AutoCAD SHX Text

4'-8" STRINGER SPACING, TYP.

AutoCAD SHX Text

5'-4 " 38" EACH END

AutoCAD SHX Text 24'-1 "12"

AutoCAD SHX Text 28'-9 "38"

AutoCAD SHX Text

52'-11 " 18" GRID WIDTH

AutoCAD SHX Text

67'-1" GRID LENGTH

AutoCAD SHX Text

PANEL SIZES

AutoCAD SHX Text

QUANTITY

AutoCAD SHX Text

LENGTH

AutoCAD SHX Text

WIDTH

AutoCAD SHX Text

AutoCAD SHX Text 5'-4 "38"

AutoCAD SHX Text 28'-9 "38"

AutoCAD SHX Text

AutoCAD SHX Text 5'-4 "38"

AutoCAD SHX Text 24'-1 "12"

AutoCAD SHX Text

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 28'-9 "38"

AutoCAD SHX Text

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 24'-1 "12"

AutoCAD SHX Text X. KEYNOTES: KEYNOTES: 1. TWO "X3" PLATES ON PANEL, ATTACHED WITH TWO "X3" PLATES ON PANEL, ATTACHED WITH "X3" PLATES ON PANEL, ATTACHED WITH 34"X3" PLATES ON PANEL, ATTACHED WITH PLATES ON PANEL, ATTACHED WITH PLATES ON PANEL, ATTACHED WITH ON PANEL, ATTACHED WITH ON PANEL, ATTACHED WITH PANEL, ATTACHED WITH PANEL, ATTACHED WITH ATTACHED WITH ATTACHED WITH WITH WITH 34" COUNTERSUNK BOLTS @ 9" SPACING. 2. ONE "X3" PLATE ON PANEL, ATTACHED WITH ONE "X3" PLATE ON PANEL, ATTACHED WITH "X3" PLATE ON PANEL, ATTACHED WITH 34"X3" PLATE ON PANEL, ATTACHED WITH PLATE ON PANEL, ATTACHED WITH PLATE ON PANEL, ATTACHED WITH ON PANEL, ATTACHED WITH ON PANEL, ATTACHED WITH PANEL, ATTACHED WITH PANEL, ATTACHED WITH ATTACHED WITH ATTACHED WITH WITH WITH 34" COUNTERSUNK BOLTS @ 9" SPACING. 3. " FULL DEPTH TRIM PLATES ON PANEL SIDES. 38" FULL DEPTH TRIM PLATES ON PANEL SIDES. 4. END PANEL LENGTH INCLUDES " FULL DEPTH END PANEL LENGTH INCLUDES " FULL DEPTH PANEL LENGTH INCLUDES " FULL DEPTH PANEL LENGTH INCLUDES " FULL DEPTH LENGTH INCLUDES " FULL DEPTH LENGTH INCLUDES " FULL DEPTH INCLUDES " FULL DEPTH INCLUDES " FULL DEPTH " FULL DEPTH 12" FULL DEPTH FULL DEPTH FULL DEPTH DEPTH DEPTH TRIM PLATE BUT DOES NOT INCLUDE "X3" PLATE BUT DOES NOT INCLUDE "X3" PLATE BUT DOES NOT INCLUDE "X3" BUT DOES NOT INCLUDE "X3" BUT DOES NOT INCLUDE "X3" DOES NOT INCLUDE "X3" DOES NOT INCLUDE "X3" NOT INCLUDE "X3" NOT INCLUDE "X3" INCLUDE "X3" INCLUDE "X3" "X3" 34"X3" PLATES.

AutoCAD SHX Text

SPAN CENTERLINE

AutoCAD SHX Text GENERAL NOTES: 1. COMPLY WITH SPECIAL DETAIL GF-01 AND COMPLY WITH SPECIAL DETAIL GF-01 AND WITH SPECIAL DETAIL GF-01 AND WITH SPECIAL DETAIL GF-01 AND SPECIAL DETAIL GF-01 AND SPECIAL DETAIL GF-01 AND DETAIL GF-01 AND DETAIL GF-01 AND GF-01 AND GF-01 AND AND AND SECTION 808 OF THE 2026 LOUISIANA STANDARD 808 OF THE 2026 LOUISIANA STANDARD 808 OF THE 2026 LOUISIANA STANDARD OF THE 2026 LOUISIANA STANDARD OF THE 2026 LOUISIANA STANDARD THE 2026 LOUISIANA STANDARD THE 2026 LOUISIANA STANDARD 2026 LOUISIANA STANDARD 2026 LOUISIANA STANDARD LOUISIANA STANDARD LOUISIANA STANDARD STANDARD STANDARD SPECIFICATIONS FOR ROADS AND BRIDGES FOR ROADS AND BRIDGES FOR ROADS AND BRIDGES ROADS AND BRIDGES ROADS AND BRIDGES AND BRIDGES AND BRIDGES BRIDGES BRIDGES (LSSRB), AND ANY REFERENCED SECTIONS. 2. GALVANIZE ALL PANELS AND TRIM PLATES PER GALVANIZE ALL PANELS AND TRIM PLATES PER ALL PANELS AND TRIM PLATES PER ALL PANELS AND TRIM PLATES PER PANELS AND TRIM PLATES PER PANELS AND TRIM PLATES PER AND TRIM PLATES PER AND TRIM PLATES PER TRIM PLATES PER TRIM PLATES PER PLATES PER PLATES PER PER PER SECTION 811 OF THE LSSRB. 3. MAIN BEARING BARS SHALL RUN NORMAL TO MAIN BEARING BARS SHALL RUN NORMAL TO BEARING BARS SHALL RUN NORMAL TO BEARING BARS SHALL RUN NORMAL TO BARS SHALL RUN NORMAL TO BARS SHALL RUN NORMAL TO SHALL RUN NORMAL TO SHALL RUN NORMAL TO RUN NORMAL TO RUN NORMAL TO NORMAL TO NORMAL TO TO TO STRINGERS. 4. SEE TABLE THIS SHEET FOR REQUIRED PANEL SEE TABLE THIS SHEET FOR REQUIRED PANEL TABLE THIS SHEET FOR REQUIRED PANEL TABLE THIS SHEET FOR REQUIRED PANEL THIS SHEET FOR REQUIRED PANEL THIS SHEET FOR REQUIRED PANEL SHEET FOR REQUIRED PANEL SHEET FOR REQUIRED PANEL FOR REQUIRED PANEL FOR REQUIRED PANEL REQUIRED PANEL REQUIRED PANEL PANEL PANEL SIZES AND QUANTITIES.

AutoCAD SHX Text

DETAIL A

AutoCAD SHX Text

DETAIL B

AutoCAD SHX Text

DIRECTION OF TRAFFIC

AutoCAD SHX Text

DIRECTION OF TRAFFIC

AutoCAD SHX Text

DIRECTION OF TRAFFIC

AutoCAD SHX Text

DIRECTION OF TRAFFIC

AutoCAD SHX Text

3" TYP.

AutoCAD SHX Text

9" TYP.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

NO.

AutoCAD SHX Text

STATE

AutoCAD SHX Text

PROJECT

AutoCAD SHX Text

PARISH

AutoCAD SHX Text

DESIGNED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

DETAILED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NUMBER

AutoCAD SHX Text

CONTROL

AutoCAD SHX Text

SECTION

AutoCAD SHX Text

SERIES NUMBER

AutoCAD SHX Text

REVISION OR CHANGE ORDER DESCRIPTION

AutoCAD SHX Text

DOTD BRIDGE MAINTENANCE

AutoCAD SHX Text

VERMILION

AutoCAD SHX Text

AutoCAD SHX Text 055-30

AutoCAD SHX Text

ABBEVILLE BYPASS VERTICAL LIFT BRIDGE (009460)

AutoCAD SHX Text

GRID DECK PANEL INFORMATION

AutoCAD SHX Text

PLAN VIEW NO SCALE

AutoCAD SHX Text

DETAIL A NO SCALE

AutoCAD SHX Text

DETAIL B NO SCALE

AutoCAD SHX Text NOT FOR CONSTRUCTION FOR MATERIAL PURCHASE ONLY ENGINEER OF RECORD: JASON MICHIELS LICENSE NO. 36010 JUNE 26, 2026

Sheets and Views

PLAN

File details come from the government source that posted it. Updated Sep 3, 2026.