A6 Salient Characteristics Hose Assy Characteristics_PASP.pdf
PDF 81 KB Posted
- Solicitation number
- N61331-26-Q-JC12
About this file
This document specifies salient characteristics for a thermoplastic 100R8 hose assembly. The hose shall measure ¼ inch in diameter with an overall length of 3 feet and be rated for service up to 5000 PSI. Both end connections require 316 stainless steel #4 female O-ring face seal fittings.
Fabrication shall employ specific lubrication procedures: no lubricant between the hose inner diameter and end fitting, with water-soluble lubricant used only during the swaging process. The completed assembly must undergo proof testing at 10,000 psig for 1 to 5 minutes with zero leakage tolerance, and test reports documenting results are required.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS
FOR
HOSE ASSEMBLY
Type: Thermoplastic 100R8 HOSE
Size: ¼ inch
Overall Length: 3 foot
Service: UP TO 5000 PSI SERVICE
End Connection 1: 316 Stainless Steel (SS) #4 Female O-Ring Face Seal
End Connection 2: 316 Stainless Steel (SS) #4 Female O-Ring Face Seal
Other: N/A
Assembly: Lubrication for fabrication of hose is as follows:
- Use no lubricant between the ID of the hose and the end fitting.
- Use water soluble lubricant during swaging process
Testing: Proof test hose to 10,000psig for 1-5 minutes. There shall be no leakage. With Test Reports.
File details come from the government source that posted it. Updated .