A6 Salient Characteristics Hose Assy Characteristics_EBAC.pdf
PDF 85 KB Posted
- Solicitation number
- N61331-26-Q-JC12
About this file
This document is a Salient Characteristics specification for a hose assembly procurement. The required product is a ¼-inch thermoplastic 100R8 hose assembly, 6 feet in overall length, rated for service up to 5,000 PSI. Both end connections must be 316 stainless steel #4 female JIC swivel fittings, and the assembly must include spring guards on both ends. The hose must be lubricated during fabrication using water-soluble lubricant during the swaging process, with no lubricant applied between the hose's inner diameter and end fitting.
The specification includes a mandatory proof testing requirement whereby the hose assembly must be pressure-tested to 10,000 psig for 1 to 5 minutes with zero leakage permitted. Test reports documenting proof test results must be provided with the deliverable. These salient characteristics define the minimum technical requirements that any proposed hose assembly must meet to satisfy the contract requirement.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS
FOR
HOSE ASSEMBLY
Type: Thermoplastic 100R8 HOSE
Size: ¼ inch
Overall Length: 6 foot
Service: UP TO 5000 PSI SERVICE
End Connection 1: 316 Stainless Steel (SS) #4 Female JIC Swivel
End Connection 2: 316 Stainless Steel (SS) #4 Female JIC Swivel
Other: Spring Guards on both ends
Assembly: Lubrication for fabrication of hose is as follows:
- Use no lubricant between the ID of the hose and the end fitting.
- Use water soluble lubricant during swaging process
Testing: Proof test hose to 10,000psig for 1-5 minutes. There shall be no leakage. With Test Reports.
File details come from the government source that posted it. Updated .