A2 PWS Haas ST30Y Lathe Alignment AVCRAD.pdf

MISSOURI NATIONAL GUARD

AVIATION CLASSIFICATION REPAIR ACTIVITY DEPOT

5250 W. DEPOT ROAD

SPRINGFIELD, MISSOURI 65803-9513

PERFORMANCE WORK STATEMENT (PWS) for

Haas ST30Y Lathe Alignment AVCRAD

W912NS25Q8520

SECTION 1

GENERAL

1.0 General: This is a non-personal service contract to provide lathe alignment services for one (1) Haas Computer Numerical Control (CNC) Turning Center Lathe located in the machine shop at Missouri Aviation Classification Repair Activity Depot (MO AVCRAD), Springfield, MO. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform lathe alignment services on CNC Turning Center Lathe ST-30Y Serial Number (SN) 3116995 as defined in this PWS.

1.1.1 The Contractor shall be responsible for ensuring all services, parts and Original Equipment Manufacturer (OEM) components provided under this contract are in accordance with (IAW) the terms and conditions outlined herein, conform to the manufacturer’s equipment specifications and this PWS.

1.2 Background: MO AVCRAD provides field and limited depot aviation aircraft support to a regional 14 state support area. MO AVCRAD maintains a modern, state of the art, limited depot repair facility capable of completing complex repairs on military aircraft.

The turning center lathe is required to fabricate bushings and custom tooling for machine shop work orders.

1.3 Requested Services: The Contractor shall perform the following services:

• Realign the spindle to remove taper from the test cut part.

• Reset the Y alignment

• Reset the turret alignment parallelism and check turret disk rotation alignment

• Check the tail stock alignment

• Reset X and Y zero positions

• Reset tool touch setter calibration

1.4 Period of Performance (PoP): Requested lathe alignment services are to be conducted within 60 days of contract award date.

Ver. December 2020

1.5 Over and Above (O&A): O&A is defined as work discovered while performing the repair efforts that are within the scope of the contract and necessary to satisfactorily complete the contract. The Contractor shall complete O&A requirements In Accordance With (IAW) Defense Federal Acquisition Regulation Supplement (DFARS) 252.217-7028.

PGI 217.77.

1.6 Parts and Materials: The Contractor shall provide and use only new parts and material in performance of this PWS unless otherwise authorized by the Contracting Officer (KO). Long lead items greater than five (5) business days must be identified and provide sufficient documentation supporting the delay.

1.7 Service Report: Immediately upon completion of the lathe alignment services and before leaving the MO AVCRAD, the Contractor shall provide a written Preliminary Service Report to the Government Contracting Officer Representative (COR). The COR will forward the service report to the Government Point of Contact (GPOC) within two (2) business days of receipt. The Contractor shall email the final service report within five (5) business days to the GPOC. As a minimum, the final service report shall contain the following information:

• name of the company

• requested service date

• contract number

• equipment ID#

• description of services provided

• additional services recommended (if any)

• printed name and signature of technician who performed the services (electronic signatures are acceptable)

• start and completion dates

• complete breakdown of the labor cost (hours and rate)

• materials and parts used

• details of any other charges

• printed name and signature stating only new parts and materials were used

(electronic signatures are acceptable)

• written verification statement that a performance check to verify operational condition was performed and that the equipment is in working order. (electronic signatures are acceptable)

1.8 General Information:

1.8.1 Place and Performance of Services: The contractor shall provide services between the hours of 0730-1500 Monday through Friday, except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Contract performance shall be at 5250 W Depot Rd, Springfield, MO 65803.

1.8.1.1 Telework: Telework is not allowed under this PWS.

1.8.1.2 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. In the event that Contractor technicians are unable to complete the necessary tasks, additional funding will be provided for return of the technician. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.8.1.3 The contractor’s employees shall become familiar with and obey the regulations of the installation, including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.8.2 Recognized Holidays: The following are recognized United States (US) holidays.

The contractor shall not perform services on these days:

1.8.2.1 New Year’s Day: January 1st

1.8.2.2 Martin Luther King, Jr.’s Birthday

1.8.2.3 President’s Day

1.8.2.4 Memorial Day

1.8.2.5 Juneteenth National Independence Day: June 19th

1.8.2.6 Independence Day: July 4th

1.8.2.7 Labor Day

1.8.2.8 Columbus Day

1.8.2.9 Veteran’s Day: November 11th

1.8.2.10 Thanksgiving Day

1.8.2.11 Christmas Day: December 25th

1.8.3 RESERVED

1.8.4 Quality Assurance (QA): The Government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government will do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) or defect rate(s).

1.8.5 Installation Access and Security Requirements: The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the COR. The contractor and all associated subcontractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services, or Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by Department of Defense (DoD), Headquarters Department of Army (HQDA) and/or local policy (see PWS 6.0). Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1.8.5.1 RESERVED

1.8.5.1.1 RESERVED

1.8.5.1.2 RESERVED

1.8.5.1.3 RESERVED

1.8.5.1.8 RESERVED

1.8.5.1.5 RESERVED

1.8.5.1.5.1 RESERVED

1.8.5.1.6 RESERVED

1.8.5.2 For contractors that do not require a Common Access Card (CAC), but require access to a DoD facility or installation: Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05), and applicable installation, facility and area commander installation/facility access, and local security policies and procedures (provided by a Government representative).

1.8.5.3 Awareness Training (AT) Level 1: All contractor employees, including subcontractor employees, requiring access to Army installations, facilities, and controlled access areas shall complete AT Level 1 training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable, and within 30 calendar days of new employees commencing performance. The contractor shall submit certificates of completion for each affected contractor and subcontractor employee to the Machine Shop Supervisor, the COR, or the KO, if a COR is not assigned, within five (5) calendar days after completion of training by each employee or subcontractor personnel. AT Level 1 awareness training is available at the following website: https://jko.jten.mil

1.8.5.4 iWATCH Training: The contractor and all associated subcontractors with an area of performance within an Army-controlled installation, facilities or area shall brief all employees on the local iWATCH Army program (training standards provided by the requiring activity Antiterrorism Officer (ATO)). This locally developed training shall be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the Machine Shop Supervisor, the COR, or the KO if a COR is not assigned. This training shall be completed within seven (7) calendar days of contract award and within seven (7) calendar days of new employees commencing performance. The contractor shall report completion for each contractor employee and subcontractor employee to the Machine Shop Supervisor, the COR, or the KO if a COR is not assigned, within 30 calendar days after contract award.

1.8.5.5 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.8.5.6 RESERVED

1.8.5.6.1 RESERVED

1.8.5.6.2 RESERVED

1.8.5.6.3 RESERVED

1.8.5.6.4 RESERVED

1.8.5.6.5 RESERVED

1.8.5.7 RESERVED

https://jko.jten.mil/

1.8.5.8 RESERVED

1.8.5.9 RESERVED

1.8.5.10 RESERVED

1.8.5.11 RESERVED

1.8.5.12 RESERVED

1.8.5.13 RESERVED

1.8.5.14 RESERVED

1.8.6 Physical Security: The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.8.6.1 RESERVED

1.8.6.1.1 RESERVED.

1.8.6.1.2 RESERVED

1.8.6.1.3 RESERVED

1.8.6.2 RESERVED

1.8.7 Special Qualifications: Contractor will demonstrate that the contractor has access to all specialized tooling necessary to complete the performance requirements of this contract. All special tooling and fixtures will be supplied by the contractor at contractor's expense.

The contractor shall ensure all employees possess the required licenses for operating any equipment used in the performance of this contract. This does not include education or other qualifications for the position in which the contractor employee is performing, dress codes, or other information. (NOTE: The Government does not provide training to contractors. Contractors must ensure that any personnel performing under a contract are fully trained, licensed, certified and qualified to provide services.)

The contractor shall be responsible for safeguarding all government information for contractor use. At the close of each work period, government facilities, equipment, and materials shall be secured. Contractor will be responsible for security of equipment and material used to complete the PWS.

The government shall neither supervise contractor employees nor control the method by which the contractor performs the required tasks. Under no circumstances shall the government assign tasks to, or prepare work schedules for, individual contractor employees. It shall be the responsibility of the contractor to manage its employees and to guard against any actions that are of the nature of personal services or give the perception of personal services. If the contractor believes that any actions constitute, or are perceived to constitute personal services, it shall be the contractor's responsibility to notify the Contracting Officer immediately.

1.8.8 RESERVED

1.8.9 RESERVED

1.8.10 Identification Media Control: The contractor shall retrieve all identification media (including vehicle passes) from its employees who depart employment for any reason. The contractor shall return all identification media (i.e., badges and vehicles passes) to the KO within 14 days of an employee’s departure.

1.8.11. Combating Trafficking in Persons: The United States Government has adopted a zero-tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at FAR 22.17.

1.8.12 RESERVED

1.8.13 Data Rights: The Government has unlimited rights to all documents/materials produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the KO. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.8.14 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.8.15 RESERVED

SECTION 2

DEFINITIONS AND ACRONYMS

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Contracting Officer (KO): A person with authority to enter, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3 Contracting Officer Representative (COR): An employee of the U.S.

Government designated by the KO to monitor contractor performance. Such appointment will be in writing and will state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have the authority to change the terms and conditions of the contract.

2.1.4 Government Point of Contact (GPOC): AVCRAD Maintenance Foreman

2.1.4 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.5 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.6 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.7 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.8 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of a product or service shall meet contract requirements.

2.1.9 Subcontractor: One that enters a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.2 Acronyms:

AT Awareness Training ATO Antiterrorism Officer AVCRAD Aviation Classification Repair Activity Depot CAC Common Access Card CNC Computer Numerical Control COMSEC Communications Security COR Contracting Officer Representative DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense FAR Federal Acquisition Regulation FPCON Force Protection Condition GFP/M/E/S Government Furnished Property/Material/Equipment/Services GPOC Government Point of Contact HQDA Headquarters, Department of the Army HSPD Homeland Security Presidential Directive IAW In Accordance With IT Information Technology KO Contracting Officer NCIC-III National Crime Information Center Interstate Identification OEM Original Equipment Manufacturer OCI Organizational Conflict of Interest PGI Procedures, Guidance, and Information POC Point of Contact POP Period of Performance PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan

QC Quality Control SDS Safety Data Sheet SN Serial Number TE Technical Exhibit TSDB Terrorist Screening Database

SECTION 3

GOVERNMENT FURNISHED MATERIALS & PROPERTY

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S): The Government will provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Property: The Government will furnish the necessary workspace for the contractor to perform services outlined in this PWS to include desk space, telephones, computers and other items necessary to maintain an office environment.

3.2 Materials: The Government will furnish coolants, oils, and fluids as needed for Lathe alignment services.

3.3 Equipment: The Government will furnish a Man Lift for use by contractor personnel in the performance of PA checks and activities as described in this PWS. The Government will also provide waste storage containers as needed.

3.4 Services: Removal and disposal waste, coolant, oils, and any other fluids/solids.

3.5 Documentation: The Government will provide Safety Data Sheets (SDS) upon request.

3.6 Utilities: All utilities in the facility will be available for the contactor’s use in the performance of this contract. The contractor shall instruct employees in utilities conservation practices. The contractor shall operate under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount.

SECTION 4

CONTRACTOR FURNISHED PROPERTY

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E):

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

4.2 RESERVED

4.3 RESERVED

SECTION 5

REQUIREMENTS

5.0 Requirements: The contractor shall:

5.1 Within 60 days after receipt of order, perform lathe alignment services on CNC Turning Center Lathe ST-30Y Serial Number (SN) 3116995 located in the machine shop at MO AVCRAD.

5.1.1 Provide Machine Shop Supervisor or COR with a preliminary written service report detailing work performed, findings, and condition of the machine.

5.1.2 Email the final service report within five (5) business days to the GPOC.

5.2: RESERVED

5.2.1 RESERVED

5.2.2 RESERVED

6.0 Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Mandatory or Advisory Website

Federal Acquisition Regulation https://www.acquisition.gov/?q=browsefar Defense Federal Acquisition

Regulation Supplement http://www.acq.osd.mil/dpap/dars/dfarspgi/current/in dex.html or https://www.acquisition.gov/dfars DoDM 1000.13-M-V1

DoD Identification (ID) Cards (Enclosure 2, paragraph 3.b)

01/23/2014 (Change 1:

07/28/2020) http://www.esd.whs.mil/Directives/issuances/dodm

Federal Information Processing Standards (FIPS) Publication 201-3

Personal Identity Verification (PIV) of Federal Employees and Contractors

January

Personal Identity Verification (PIV) of Federal

Employees and Contractors (nist.gov)

DoDI 5200.2 DoD Personnel Security Program (PSP)

04/21/2014 (Change 1:

09/09/2014)

DoDI 5200.02, "DoD Personnel Security Program (PSP)," March 21, 2014; Incorporating Change 3 on

September 24, 2020 (whs.mil) Homeland Security Presidential

Directive (HSPD)-12 Policy for a Common Identification

Standard for Federal Employees and Contractors

01/27/2022 https://www.dhs.gov/homeland-security-presidential-directive-12

DoDI 5400.11 Department of Defense Privacy and

Civil Liberties Programs

01/29/2019 (Change 1:

12/8/2020) https://www.esd.whs.mil/Directives/issuances/dodi/

DoD 5400.11-R Department of Defense Privacy

Program

05/14/2007 DoD 5400.11-R, May 14, 2007 (whs.mil)

DoD 8570.01-M Information Assurance Workforce

Improvement Program

12/19/2005 (Change 4:

11/10/2015) https://www.esd.whs.mil/Directives/issuances/dodm/

32 Code of Federal Regulation Part 117, National Industrial Security

Program Operating Manual

(NISPOM)

11/30/2021 eCFR :: 32 CFR Part 117 -- National Industrial Security Program Operating Manual (NISPOM)

Army Directive 2014-05 Policy and Implementation

Procedures for Common Access Card Credentialing and Installation Access for Uncleared Contractors

03/07/2014 https://armypubs.army.mil/ProductMaps/PubForm/A rmyDir.aspx

AR 25-2

Army Cybersecurity

04/04/2019 http://armypubs.army.mil/ProductMaps/PubForm/AR aspx

AR 530-1

Operations Security

09/26/2014 http://armypubs.army.mil/ProductMaps/PubForm/AR aspx

AR 525-13

Antiterrorism

12/03/2019 http://armypubs.army.mil/ProductMaps/PubForm/AR aspx

Executive Order on Combating Race and Sex Stereotyping

09/22/2020 Mandatory Executive Order on Combating Race and Sex Stereotyping – The White House (archives.gov)

DD 250

Material Inspection and Receiving

Report

Aug 2000 https://www.esd.whs.mil/Directives/forms/dd0001_0 499/ https://www.acquisition.gov/?q=browsefar http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html https://www.acquisition.gov/dfars http://www.esd.whs.mil/Directives/issuances/dodm https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-3.pdf https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-3.pdf https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodi/520002p.pdf?ver=2018-05-11-100552-223 https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodi/520002p.pdf?ver=2018-05-11-100552-223 https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodi/520002p.pdf?ver=2018-05-11-100552-223 https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.esd.whs.mil/Directives/issuances/dodi/ https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodm/540011r.pdf https://www.esd.whs.mil/Directives/issuances/dodm/ https://www.ecfr.gov/current/title-32/subtitle-A/chapter-I/subchapter-D/part-117 https://www.ecfr.gov/current/title-32/subtitle-A/chapter-I/subchapter-D/part-117 https://armypubs.army.mil/ProductMaps/PubForm/ArmyDir.aspx https://armypubs.army.mil/ProductMaps/PubForm/ArmyDir.aspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx https://trumpwhitehouse.archives.gov/presidential-actions/executive-order-combating-race-sex-stereotyping/ https://trumpwhitehouse.archives.gov/presidential-actions/executive-order-combating-race-sex-stereotyping/ https://www.esd.whs.mil/Directives/forms/dd0001_0499/ https://www.esd.whs.mil/Directives/forms/dd0001_0499/

TECHNICAL EXHIBIT 1

Performance Requirements Summary (PRS)

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance Objective

Performance Standard

Acceptable Quality Levels

(AQL)

Surveillance Method / By Whom

5.1 Lathe Alignment

Services

Within 60 days after award of contract/receipt of order, perform Lathe Alignment services

The covered machine has been aligned and is functioning within acceptable levels

Inspection / Machine Shop Supervisor or

COR

5.1.1 Provide preliminary report of services

provided and machine condition

Immediately upon alignment services completion

Preliminary report detailing work performed, findings, and condition of the machine provided

Inspection / Machine Shop Supervisor or

COR

5.1.2 Email the final

service report to the

GPOC

Within five (5) days of alignment services completion

Final report detailing work performed, findings, and condition of the machine provided

Inspection / Maintenance Foreman or COR

TECHNICAL EXHIBIT 2

Deliverables Schedule

PWS Reference / Deliverable Title Frequency Number of

Copies Medium/Format Submit To

1.8.5.3 AT Level 1

Awareness Training

Certificates

Provide within 5 calendar days after employee completes training.

1 Electronic Submission

Machine Shop Supervisor or COR

1.8.5.4 iWATCH Training Certificates

Provide within 30 calendar days after contract award. 1 Electronic

Submission Machine Shop

Supervisor or COR

1.8.10 Identification Media

Return within 14 days of employee’s departure from contract performance.

Original(s) Hard Copy Machine Shop

Supervisor or COR

5.1.1 Provide preliminary report of services

provided and machine condition

Immediately upon alignment services completion

Hard Copy and Electronic

Submission

Machine Shop Supervisor or COR

5.1.2 Email the final service report

Within five (5) business days after performance completion 1 Electronic

Submission Machine Shop

Supervisor