A06_Updated_Specifications_Wheel_Loader.xlsx
XLSX spreadsheet 33 KB Posted
- Attached to
- ROMO CATERPILLAR 920 WHEEL LOADER (OR EQUIVALENT) Federal contract opportunity
- Solicitation number
- 140P1225Q0049
About this file
This document is a detailed specification sheet for a Caterpillar 920 Standard Lift Wheel Loader for Rocky Mountain National Park. The specifications cover comprehensive technical requirements for a wheel loader, including precise details on engine performance, emissions compliance, powertrain, hydraulic systems, operator station features, and serviceability. Key specifications include a minimum 120 hp engine, US EPA Tier 4 Final EU Stage V compliance, hydrostatic transmission, closed-loop hydraulic system, and specific performance metrics like maximum total cycle time of 11.5 seconds and a minimum full turn static tipping load of 14,026 lb.
The solicitation (No. 140P1225Q0049) is issued by the Department of the Interior National Park Service Intermountain Region for delivery to Rocky Mountain National Park in Estes Park, Colorado. Unique requirements include 24/7 remote service capabilities, service trucks with crane lifting capacity of 14 tons, multiple service locations within 100 miles, and sufficient parts inventory. The manufacturer must provide a minimum one-year warranty with unlimited hours, two sets of paper manuals, and guarantee against material and workmanship defects. Delivery will be made directly to the park's address at 1000 US Hwy 36.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140P1225Q0049_Amd_0001.pdf | ||
| Sol_140P1225Q0049.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1 WHEEL LOADERS Caterpillar 920 Standard Lift
| BASIC SPECIFICATIONS | Machine configuration: 920 Standard Lift with general purpose buckets, bolt-on cutting edges, 80 kg (176 lb) operator and 17.5 R25 (L2) XTLA tires. |
| Y____ N____ | Engine net power shall be at least 120 hp (90 kW) according to SAE J1349. |
| Y____ N____ | Engine gross power shall be at least 123 hp (92 kW) according to SAE J1995. |
| Y____ N____ | Machine width over tires shall be no more than 7'4" (2259 mm). |
| Y____ N____ | Machine wheelbase shall be no more than 8'10" (2700 mm). |
| Y____ N____ | Machine height shall be no more than 10'2" (3110 mm). Not including beacon. |
| Y____ N____ | Machine bucket clearance at maximum lift and level bucket shall be 11'8" (3562mm). |
| Y____ N____ | Machine bucket pin height shall be 12'6" (3818 mm). |
| Y____ N____ | Maximum total cycle time of 11.5 seconds. |
| BUCKET (CHOOSE ONE) | |
| Y____ N____ | 2.4 CYD (1.8 m3) General Purpose Pin on bucket. Machine shall meet the following specifications: |
Minimum full turn static tipping load of 14,026 lb (6364 kg) per ISO 14397-1 Minimum breakout force of 20,085 lb (9113 kg) Minimum dump clearance of 9'5" (2882 mm) at full lift and 45 degree discharge Minimum reach of 2'10" (881 mm) at full lift and 45 degree discharge Minimum dig depth of 2.3” (60 mm) Minimum rackback angle at carry of 44 degrees Maximum overall length of 21'9" (6631 mm) Maximum overall height with bucket raised of 15'9" (4825 mm) Minimum machine operating weight of 21,282 lb (9656 kg)
| ENGINE | |
| Y____ N____ | Engine shall be US EPA Tier 4 Final EU Stage V compliant and Tier 4 Final Stage V compliance certificate shall be provided with the machine upon delivery with the document package. The Engine shall have from Factory an US EPA Tier 4 Final EU Stage V sticker mounted on the engine. |
| Y____ N____ | Engine shall be equipped with Diesel Particulate Filter and Selective Catalyst Reduction system and will require no additional fluids beyond Ultra Low Sulfur Diesel fuel and Diesel Exhaust Fluid (DEF) for emission compliance. |
| Y____ N____ | Machine equipped with in-cab DEF level gauge as standard. |
| Y____ N____ | Emissions requirements shall meet or exceed worldwide requirements and be Tier 4 Final EU Stage V compliant. |
| Y____ N____ | Emission system shall not require any input from operator or disrupt work under normal operating conditions. |
| Y____ N____ | Engine shall be no more than 3.6 L four-cylinder for fuel economy, with electronically controlled fuel injection for precise timing. |
| Y____ N____ | Engine bore shall be no more than 3.86" (98 mm) and stroke shall be no more than 4.72" (120 mm). |
| Y____ N____ | Engine shall be direct injection turbocharged for reliability, durability and performance. |
| Y____ N____ | Engine shall have a high pressure common rail fuel system with an oil lubricated fuel pump. |
| Y____ N____ | Machine shall be standard with one 1000 CCA (minimum capacity) maintenance free battery mounted within the main chassis. |
| Y____ N____ | Machine shall have optional cold start package which adds 1 additional 1000 CCA battery for easy cold weather starting |
| Y____ N____ | Machine shall have optional engine block heater and automatic starting aid for easy cold weather starting |
| Y____ N____ | Automatic, electronic fuel priming pump and fuel/water separator shall be standard. |
| Y____ N____ | Fuel filter should be replaced as dry and primed automatically to minimize fuel contamination. |
| Y____ N____ | Fuel filter priming shall be accomplished without the use of fuel bleeder valves after a filter change or after water/sediment draining. |
| Y____ N____ | Fuel filter priming shall be accomplished without the use of a manual priming mechanism after a filter change or after water/ sediment draining. |
| Y____ N____ | Machine shall have ECO mode feature as standard to conserve fuel. |
| Y____ N____ | Machine shall have a minimum alternator rating of 150 amp. |
| Y____ N____ | Machine shall have a standard backup alarm. |
| Y____ N____ | Machine shall have a standard master battery disconnect switch, accessible at ground level. |
| Y____ N____ | Machine shall use gear driven water and oil pumps. |
| Y____ N____ | Machine ECM shall automatically derate the engine for protection during overheating. |
| Y____ N____ | The cooling air stream shall pass over the engine before entering the cooler area. |
| Y____ N____ | The electric system shall operate on a 12 volt starting and charging system. |
| Y____ N____ | A large diameter crankshaft shall be standard and made of SG iron. |
| Y____ N____ | Three-ring controlled-expansion pistons lubricated by oil from the oil cooling jets shall be standard. |
| Y____ N____ | Engine shall have a straight-cut steel front gear train to ensure precise fuel pump timing for optimum economy and performance. |
| Y____ N____ | Wiring harnesses shall be wrapped with abrasive resistant braided nylon material to prevent accidental damage and short circuits within the system. |
| Y____ N____ | Wiring harnesses shall be securely fastened throughout the machine. |
| Y____ N____ | Deutsch (DT) connectors shall be used to improve wire harness reliability by locking out dust and moisture. |
| Y____ N____ | Individual wires in the wiring harness shall be color-coded and numbered every 2" (50 mm) for easier diagnosis and servicing. |
| Y____ N____ | Machine shall have automatic idle engine shutdown feature as standard. |
| Y____ N____ | Machine shall have Fuel and DEF level gages on the primary display to help with fluid fill management. |
| Y____ N____ | DEF tank shall be located away from the diesel fuel tank to prevent fluid mix up. |
| Y____ N____ | Machine shall allow DEF fluid to be purged automatically even when the machine power disconnect key is switched to the OFF position. |
| POWERTRAIN/TRANSMISSION | |
| Y____ N____ | Machine shall have a forward/neutral/reverse switch standard on the implement control joystick. |
| Y____ N____ | Machine shall have a minimum forward and reverse travel speed of 6.3 mph (10 kph) in Speed Range 1. |
| Y____ N____ | Machine shall have a minimum forward and reverse travel speed of 12.5 mph (20 kph) in Speed Range 2. |
| Y____ N____ | Machine shall have a minimum forward and reverse travel speed of 25 mph (40 kph) in Speed Range 3. |
| Y____ N____ | Machine shall have three forward and three reverse speeds with a maximum of 25 mph (40 kph). |
| Y____ N____ | Machine shall have ground accessible ports to sample engine and Hydrualic oil. |
| Y____ N____ | Machine shall have gear box oil sight gauge and fill point on the same side of the machine. |
| Y____ N____ | Machine shall have independent control for ground speed and engine RPM |
| Y____ N____ | Machine shall have operator-selectable Rim Pull Control feature to minimize tire slip and wear in various ground conditions, always within a glance on the console to know the exact setting. |
| Y____ N____ | Machine shall have seperate operator-selectable Creeper Control feature to control ground down speed from 0.6 mph (1 kph) to 6.3 mph (10kph) independent of engine RPM. |
| Y____ N____ | The operator shall have a three-position selectable function, readily seen at all times, and adjustable on-the-go, which tunes the Forward-Neutral-Reverse switch to have more aggressive or smoother shifts from Forward to Reverse or Reverse to Forward. |
| Y____ N____ | All operator tuning functions to adjust the powertrain to have more aggressive or smoother shifts shall be readily seen on the console at all times with a glance from the operator. This feature may not be the type which is only selectable within a series of menu commands within a console display. |
| Y____ N____ | The hydrostatic power train shall provide dependable and smooth operation with a single Forward-Neutral-Reverse switch on the joystick for easy and precise control of direction changes. |
| Y____ N____ | An inching function shall be available to allow momentary travel speed as low as zero with full engine rpm. |
| Y____ N____ | A transmission increment decrement switch shall be provided, with four speed ranges, and 3 rimpull settings shall be available in all speed ranges. |
| Y____ N____ | Machine shall have closed-loop hydrostatic system for high performance. |
| Y____ N____ | Machine shall have single-path, variable displacement pump (axial piston type) and two variable displacement motors (bent axis type) driving fixed ratio gear box. |
| Y____ N____ | Machine shall be capable of full power directional changes. |
| STEERING | |
| Y____ N____ | Steering articulation angle shall be at least 40° per side. |
| Y____ N____ | Machine shall have two steering cylinders with a bore of at least 2.4 in (60 mm). |
| Y____ N____ | Steering cycle time from full left to right or full right to left at maximum RPM shall be less than 2.8 sec |
| Y____ N____ | Steering system shall use a dedicated pump with dual double acting cylinders. |
| Y____ N____ | Steering torque measured at the articulation pivot shall be at least 27,369 lbf-ft (37,101 Nm) with the machine in the straight line position. |
| Y____ N____ | Steering torque measured at the articulation pivot shall be at least 21,593 lbf-ft (29,276 Nm) with the machine steered away from full articulation. |
| Y____ N____ | Maximum steering working pressure shall be 3,190psi (22,000 kPa). |
| Y____ N____ | High impact rubber steering stops shall be standard. |
| Y____ N____ | Adjustable tilt steering system shall be available for operator comfort, and adjusted by hand only. |
| Y____ N____ | Secondary steering system shall be available. |
| Y____ N____ | A fully hydraulic power steering system shall feature a dedicated fixed displacement steering pump to provide flow at all engine and ground speeds without compromising flow in the loader hydraulics. |
| Y____ N____ | The machine shall feature center-point frame articulation and rear axle oscillation of at least 11 degrees each side. |
| Y____ N____ | A fully hydraulic power steering system shall feature center-point frame articulation. |
| Y____ N____ | The machine will feature front-to-rear wheel tracking to minimize collisions with the rear chassis, as in tight area turning. |
| ARTICULATION HITCH | |
| Y____ N____ | Articulation hitch shall have at least 37" (950 mm) measured between the top of the upper pivot pin and the bottom of the lower pivot pin. |
| Y____ N____ | Grouped grease points will include the rear axle pivot and rear joints on the steering cylinders. |
| Y____ N____ | Drive shaft will have segments, no longer than 4' (1.2 m) long each, and be located within the main frame. |
| Y____ N____ | The lowest point in the hitch pivot area shall be main frame components and not the drive shaft or steering linkage. |
| CHASSIS | |
| Y____ N____ | The chassis shall have an open design to allow debris to shed away, or allow debris to be blown or washed away. |
| Y____ N____ | Service platforms above rear tires shall be large enough for a serviceman to have both boots squarely set with at least 12" (305mm) of open space in between his feet. |
| Y____ N____ | Rear engine enclosure shall be no wider than the cab to allow visibility to the rear counterweight corners and objects behind the machine. |
| Y____ N____ | The engine enclosure shall have a curved design towards the rear to provide excellent visibility. |
| Y____ N____ | Engine, hystat pump, and implement pump shall be mounted along the machine longitudinal centerline to improve engine enclosure packaging for rear visibility |
| BRAKES | |
| Y____ N____ | Service brake shall feature completely closed and sealed standard inboard oil-immersed disc brakes on front and rear axles that are adjustment free. |
| Y____ N____ | Audible alarm and Indicator light shall alert operator if brake pressure drops below normal operating parameters. |
| Y____ N____ | Machine shall have continually charged nitrogen accumulators to provide stopping capability after loss of engine power. |
| Y____ N____ | Parking brake shall be mechanical, disk and caliper type on driveline for positive manual operation. The transmission shall be automatically neutralized when parking brake is applied. |
| Y____ N____ | Single, suspended inching/ braking pedal shall function as ground speed control and a brake so the operator can maintain high engine rpm for full hydraulic flow and fast cycle times. |
| Y____ N____ | Hydrostatic drive shall be variably neutralized during braking. |
| Y____ N____ | Hydrostatic system shall provide additional hydraulic braking capacity. |
| Y____ N____ | Brake pedals shall be suspended for easy cleaning of the floor and keeping debris from impeding pedal linkage. |
| Y____ N____ | Parking brake slope holding ability shall be 30°. |
| HYDRAULIC SYSTEM | |
| Y____ N____ | The joystick controller shall have an operator tunable function to have two worktool modes each with three settings, making the reaction rate of the joystick more aggressive with maximum flow or making the reaction rate smoother with less maximum flow. |
| Y____ N____ | Machine shall have a load sensing, variable displacement hydraulic pump with low effort, electrohydraulic controls. |
| Y____ N____ | The implement pump maximum working pressure shall be at least 4,061 psi (28,000 kPa). |
| Y____ N____ | The standard auxiliary hydraulic output at 2350 engine rpm with SAE 10W oil at 150 °F (65 °C) shall be 25 gal/min (95L/min). |
| Y____ N____ | The maximum auxiliary hydraulic output when equipped with optional high flow at 2350 engine rpm and 4,061 psi (28000 kPa) with SAE 10W oil at 150 °F (65 °C) shall be 40 gal/min (150 L/min). |
| Y____ N____ | Machine shall have optional 3rd and 4th function hydraulics available for use with work tools that require hydraulic power. |
| Y____ N____ | Machine shall have a continuous flow feature for either 3rd or 4th function auxiliary hydraulics, allowing rotating work tools such as brooms and snow blowers to run automatically. |
| Y____ N____ | Double acting, threaded gland lift cylinders shall have bore and stroke of at least 3.9 X 23.3 in (100 X 593 mm). |
| Y____ N____ | Machine shall feature a red colored hydraulic lock out safety cap to disable implement functions. |
| Y____ N____ | The hydraulic oil cooler shall be single plane design with no other coolers in front or in back within the cooling air stream. |
| Y____ N____ | The hydraulic oil cooler shall be cleaned with the serviceman positioned on the ground only. |
| Y____ N____ | Low effort joystick control shall offer simultaneous lift and tilt functions. |
| Y____ N____ | Machine shall use XT3 hoses with 4,061 psi (28000 kPa) working pressure. |
| Y____ N____ | Steering and implement pumps shall be separate. |
| Y____ N____ | Machine shall have pressure taps to allow quick diagnosis of complete hydraulic system. |
| Y____ N____ | Machine shall have a hydraulically driven demand fan standard |
| Y____ N____ | Machine shall have optional hydraulic driven reversing fan made available. |
| Y____ N____ | Machine shall have two section implement control valve for lift and tilt functions and up to two additional valve sections optional. |
| Y____ N____ | Hydraulic couplings shall have O-ring face seals. |
| Y____ N____ | Biodegradable hydraulic oil shall be available as an alternative to mineral-based oils. |
| Y____ N____ | A Ride Control system shall be available for smooth operation in rough roading conditions. |
| Y____ N____ | The implement pump shall be mechanically and directly connected to engine output. |
| AXLES | |
| Y____ N____ | Front axle shall be rigidly mounted to the front loader frame. |
| Y____ N____ | Rear axle shall have a remote trunnion lubrication fitting to simplify maintenance. |
| Y____ N____ | Front and rear axles shall contain an electronic means of locking the differentials with a joystick mounted control, without stopping the machine. Axle shall automatically stay locked until equal torque is sensed on both wheels. |
| Y____ N____ | 100% Locking Differentials shall be standard on both front and rear axles. |
| Y____ N____ | Seals on the axle and housing shall keep oil in and lock contaminants out to prevent contamination of internal components. |
| Y____ N____ | Planetary reduction gears shall be outboard mounted for durability and to have separate oil compartments, minimizing general contamination in the event of a gear or bearing failure. |
| Y____ N____ | Final drives shall have high contact ratio gears for quiet, durable operation. |
| Y____ N____ | Rear axle shall have an oscillation trunnion to allow the rear wheel to raise or drop a total of 13.8 in (350 mm) |
| Y____ N____ | Planetary final drives shall consist of ring gears pressed and doweled into axle housing and planetary carried assemblies including planet gears with full floating bronze sleeve bearings. |
| WHEELS | |
| Y____ N____ | Tires shall be Michelin X Sno Plus 20.5 inch for winter operation |
| OPERATOR'S STATION | |
| Y____ N____ | Left and right hinged doors shall fully open and lock 180 degrees flush against the cab, with the capability to open and close door from the operators seat. Both doors shall have glass extending to the cab floor for maximum side visibility. |
| Y____ N____ | Personal storage areas shall include places to store a cup, a coat and have a lockable storage area. |
| Y____ N____ | Joystick control shall operate both lift and tilt functions. Joystick shall integrate forward/reverse direction switch, and adjustable 3rd function hydraulic control (if so equipped) |
| Y____ N____ | An Engine Speed Control feature shall be available to maintain a desired engine speed, for example, when using a broom or snow blower, while having the ability to raise and lower the speed with the touch of a button. |
| Y____ N____ | Standard heated and air suspended seat shall include cloth with fully adjustable fore/aft position, seat back angle, tall back rest, lumbar support, armrest angle and air suspension stiffness. |
| Y____ N____ | Available air conditioning shall be provide defrost and demist capability, with an electric defrost grid on the rear window. |
| Y____ N____ | A comfort seat shall be available with ergonomically shaped seat cushions to reduce pressure on the lower back and thighs and allow unrestricted arm and leg movement. Arm rest angle adjustment shall also be available. |
| Y____ N____ | Seat shall include a High Vis orange 2" (50mm) or 3" (75 mm) wide retractable seat belt. |
| Y____ N____ | Front and rear wipers with washers shall be standard. Both front and rear wipers shall have washers with separate pumps and a common fluid reservoir. |
| Y____ N____ | Steps leading up to the cab shall be rectangular, wide and ladder style for secure footing. The first step, if on a flexible support, shall not flex easily to one side. Large aggressive-tread steps shall keep debris buildup to a minimum. |
| Y____ N____ | Electric detents shall be available for the lift functions as lift kickout and float, and for tilt functions as return to dig. |
| Y____ N____ | A 12V socket shall be standard for powering electronics, a radio installation package and auxiliary lighting packages. |
| Y____ N____ | A USB socket shall be standard for powering electronics. |
| Y____ N____ | Bonded, tinted glass with silicon joints and few obstructions shall eliminate pillar obstructions and allow expansive peripheral visibility. |
| Y____ N____ | Rear window shall have an electric defroster with timer. |
| Y____ N____ | Glass panels shall extend from cab roof to floor allowing visibility to ground on the front windshield |
| Y____ N____ | Machine shall have gauges including hydraulic and engine temperatures, hour meter, gear selection, DEF Level and fuel level. |
| Y____ N____ | Warning/indicator and diagnostic functions shall include: diesel particulate filter, starting aid, engine, electrical, parking brake, directional turn signals, brakes, high beams, action required notice, continuous flow, hydraulic filter bypass, bucket float, creeper, primary steering indicator and directional F/N/R. |
| Y____ N____ | Auxiliary front and rear Halogen working lighting packages shall be available. |
| Y____ N____ | Auxiliary front and rear working LED lighting packages shall be available. |
| Y____ N____ | Auxiliary front Halogen Driving/ Low be shall have a Lumens of 750 |
| Y____ N____ | Auxiliary front Halogen Passing/ High Beam shall have a Lumens of 1250 |
| Y____ N____ | Optional Auxiliary front LED Driving/ Low be shall have a Lumens of 1045 |
| Y____ N____ | Optional Auxiliary front LED Passing/ High beam be shall have a Lumens of 1945 |
| Y____ N____ | Stop, tail, and turn signal lights shall mount in rear counterweights for extra protection |
| Y____ N____ | Machine shall have an available, exterior toolbox. |
| Y____ N____ | Operators station shall expose the operator to sound pressure of no greater than 77 dB(A) per ISO 6396:2008 procedures to provide maximum operator safety. |
| Y____ N____ | The cab shall not have any curved glass. Curved glass is expensive to replace and cannot be serviced by local glass shops. |
| Y____ N____ | Operator's seat shall be a cloth-covered suspension type in cab machines & vinyl-covered suspension type in canopy machines. |
| Y____ N____ | The implement lever console shall have a full arm rest. |
| Y____ N____ | Electric detents shall be available for float and for tilt functions. |
| Y____ N____ | Electric detents shall be available for lift, lower/return to dig, rack and dump. |
| Y____ N____ | Operator compartment shall offer sliding windows as options, which is available on left and right side doors of cab machines. |
| Y____ N____ | Operator compartment and engine shall be resiliently mounted to isolate vibration from the machine frame. |
| Y____ N____ | An air conditioning option for the cab shall be available. |
| Y____ N____ | Three speed fan with a minimum of eleven vents shall be provided. |
| Y____ N____ | Machine shall have an easy to read dash with backlit LCD display and gauges including fuel level, engine coolant temperature and hydraulic oil temperature. |
| Y____ N____ | Self-canceling turn signals shall be standard. |
| Y____ N____ | Tilt steering console shall allow the operator the easily adjust the steering wheel by hand to maximize comfort and visibility. |
| Y____ N____ | A remote transmission control shall be a forward/neutral/reverse control in one switch on the implement lever for easier operation and enhanced productivity. |
| Y____ N____ | The Forward-Neutral-Reverse switch shall be contained in one switch only. |
| Y____ N____ | Hydrostatic, closed-center steering with flow amplification shall provide fast or slow steering response, depending on the operational requirement. |
| Y____ N____ | The implement controller shall include a multi-function joystick which includes lift, tilt, auxiliary hydraulics, auxiliary continuous flow selector, Forward-Neutral-Reverse switch, differential lock selector, and speed range selector. |
| Y____ N____ | Machine has optional integrated rear view camera with in cab color monitor. |
| Y____ N____ | Machine has optional integrated front view camera with in cab color monitor. |
| LOADER LINKAGE | |
| Y____ N____ | Work tools shall be quickly changed with an available integral quick coupler system. |
| Y____ N____ | Machine shall have a parallel lift linkage with a maximum variation from parallel of 9 degrees |
| Y____ N____ | Wide lift arm spacing and linkage geometry shall maximize visibility throughout the production cycle. |
| WORK TOOL OPTIONS | |
| Y____ N____ | The bucket shall have the option of being equipped with a reversible bolt-on cutting edge which increase the life of the bucket. |
| Y____ N____ | If cutting edge is not desired, bucket shall be equipped with bucket teeth. |
| Y____ N____ | Machine coupler shall be a JRB 416 to attach existing implements |
| Y____ N____ | Bucket lift circuit shall have four positions: raise, hold, lower and float. |
| Y____ N____ | An automatic bucket positioner shall be available that can be adjusted to desired loading angle and does not require visual spotting. |
| Y____ N____ | A work tool wiring harness shall be available to provide additional auxiliary hydraulic functionality beyond 3rd and/or 4th functions, such as for use with angle brooms, cold planers, and snow blowers. |
| Y____ N____ | A creeper function and electronic throttle lock shall be standard to power rotating work tools such as brooms, cold planers and snow blowers. |
| SERVICEABILITY | |
| Y____ N____ | Radiator and hydraulic oil cooler shall be in a single plane with clean out access doors as standard, cleaned at ground level. |
| Y____ N____ | All daily powertrain check points shall be visible from ground level, on the same side of the machine. |
| Y____ N____ | Radiator coolant, gear box and hydraulic oil levels shall have sight gauges visible at ground level. |
| Y____ N____ | Spin on filters for engine oil and hydraulic oil shall be ground accessible on the same side of the machine for easier servicing. |
| Y____ N____ | A scheduled oil sampling port shall be factory installed for improved access to the hydraulic oil. |
| Y____ N____ | Machine shall have easy access to engine and cooling compartments through two (2) gull wing doors that swing up and are held in place with lockable gas struts. |
| Y____ N____ | Cooling fan shall be hydraulically driven. |
| Y____ N____ | Machine error codes shall be accessible from machine diagnostic electrical port. |
| Y____ N____ | Standard service features shall include: Standard hydraulic oil cooler; adjustment free brakes; adjustment free engine fuel system; grouped grease fittings; braided, color coded and numbered wiring. |
| Y____ N____ | Machine shall have a maintenance free driveshaft aside from slip joint greasing. |
| Y____ N____ | Engine enclosure shall be impact resistant, rustproof, have a lockable latch and pneumatically-assisted struts which cannot collapse without depressing a safety catch. |
| MINIMUM SERVICE FILL CAPACITIES | |
| Y____ N____ | Engine crankcase will have a minimum of 2.6 gal (10 L) capacity. |
| Y____ N____ | Fuel tank shall have a minimum of 43.6 gal (165 L) capacity. |
| Y____ N____ | Cooling system shall have a minimum of 5.7 gal (21.5 L) capacity. |
| Y____ N____ | Front and rear axles shall each have a minimum of 4.5 gal (17 L) capacity. |
| Y____ N____ | Hydraulic system, including tank shall have a 25.9 gal (98 L) capacity. |
| Y____ N____ | Hydraulic tank shall have a 14.5 gal (55 L) capacity. |
| Y____ N____ | Gear box shall have a 0.8 gal (3.2 L) capacity. |
| Y____ N____ | Diesel Exhaust Fluid (DEF) tank shall have a 4.8 gal (18 L) capacity. |
| OWNING AND OPERATING COSTS | |
| Y____ N____ | Machine shall have a recommended engine oil change interval of at least 500 hours. |
| Y____ N____ | Extended Life Coolant/Antifreeze shall allow for up to 6,000 hours between changes. |
| Y____ N____ | Machine shall have a recommended hydraulic oil change interval of at least 6000 hours with SOS sampling. |
| Y____ N____ | Machine shall have a recommended hydraulic oil filter change interval of at least 500 hours. |
| Y____ N____ | Machine shall have a recommended hydraulic oil sampling of at least 500 hours. |
Machine hydraulic coupler MUST be a JRB 416 Machine hydraulic coupler MUST be a JRB 416 to match existing implements
| Y____ N____ | Machine shall have front and rear fenders |
| Y____ N____ | Machine shall have an optional satellite or cellular link to monitor critical system parameters from a remote location. |
| Y____ N____ | Manufacturer shall supply two sets of parts, service and operating manuals. Manuals shall be authored only in English. Paper manuals only. No electronic manuals will be accepted. |
| Warranty | Manufacturer shall guarantee the equipment offered, against material and workmanship defects for a minimum of 1 year and unlimited hours from day of delivery. |
| The manufacturer agrees to furnish without cost to the Government, replacement of all parts, materials and labor required to correct manufacturer's defects during the warranty period. |
Dealer Services Due to the isolated nature of Rocky Mountain National Park and the high likelihood of after hours remote emergency repairs, successful bidder shall be able to provide remote onsite service and repair capabilities 24 hours a day to our Grand Lake, Colorado location. Service trucks shall be capable of performing any repair as needed and have a crane capable of lifitng 14 tons. Dealer shall have multiple service locations within 100 miles and maintain sufficient parts inventory to support repair truck operations.
Delivery Delivery of equipment shall be made to Rocky Mountain National Park, 1000 US Hwy 36 Estes Park, CO 80517
File details come from the government source that posted it. Updated .