A06_Specs.pdf

SPECIFICATIONS

Project: R8 Partners for Fish & Wildlife Program GNSS Survey Equipment PR Number: PENDING

Item: Data Collectors for Trimble R10/R12 GNSS Receivers

1. Product Features

Name of Item: Data Collectors for Trimble R10/R12 GNSS Receivers Manufacturer: Trimble, Inc.

Model Number: TSC510-1-1100-00 Salient Characteristics:

• Overall size: 11.3: x 6.9”x1.5” (L x W x H).

• 5-inch multi-touch sunlight-readable screen that works with fingers, gloves, or stylus.

• 2.2 GHz Qualcomm Processor and Android 14 operating system with 8 GB LPDDR of memory and 128 GB of UFS flash memory.

• Rechargeable replacement batteries with 18 hours of battery life when using Real-Time

Kinematic (RTK) GNSS survey with real time corrections.

• Communicate seamlessly with Trimble R10 and R12 GNSS receivers to collect high quality GPS data.

• Utilize Trimble Access field software for improving survey workflows, enabling easier data collection, processing and analysis.

• Needs warranty and service contract with California Survey and Drafting Supply (sole sources in California).

Capabilities: (if applicable):

• These data collectors will be used with existing Trimble R10 and R12 GNSS receivers to collect essential GPS information essential to providing technical assistance to the public and implementing habitat restoration.

2. Delivery

Prices quoted must be FOB Destination

“F.o.b. destination” means --Free of expense to the Government delivered, on board the carrier’s conveyance, at a specified delivery point where the consignee’s facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and

Supplies shall be delivered to the destination consignee’s wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or “constructive placement” as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including

“piggyback”) is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for “heavy or bulky freight.” When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested.

If the contractor uses rail carrier or freight forwarder for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery when required, if transfer to truck is required to complete delivery to consignee.

Contractor responsibilities. The contractor shall:

1. Pack and mark the shipment to comply with contract specifications; or in the absence of specifications, prepare the shipment in conformance with carrier requirements;

2. Prepare and distribute commercial bills of lading;

3. Deliver the shipment in good order and condition to the point of delivery specified in the contract;

4. Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract;

5. Furnish a delivery schedule and designate the mode of delivering carrier; and

6. Pay and bear all charges to the specified point of delivery.

3. Delivery Location:

Product shall be delivered to the following location:

Sacramento National Wildlife Refuge 752 County Rd. 99W Willows, CA 95988

Or arrangements may be made for pickup within 125 miles of the above address.

4. Installation:

Prices quoted must include installation. All labor and parts associated with and required for installation are the sole responsibility of the contractor. No assistance or equipment will be provided by the government. Installation shall be completed according to industry standards.

mailto:Ryan_a_schaefer@fws.gov