A06_Specifications_PEFO_Wayside_Exhibit_Panels_and_Pedestals.pdf

SCOPE OF WORK - SPECIFICATIONS

FABRICATE WAYSIDE EXHIBIT PANELS AND PEDESTALS

Petrified Forest National Park, Interpretation

1. Requirement – This requirement shall include the fabrication and delivery of wayside exhibit panels and exhibit pedestals for use throughout the Petrified Forest National Park. All wayside exhibits have been designed by the government and electronic files will be provided to the contractor in either .pdf or .ai file format for fabrication.

a. The contractor shall fabricate sixty-four (64) wayside exhibit panels (thirty-two (32) unique designs printed twice) as specified to include the following:

i. Thirty-two (32) single sided panels – 24” H x 36” W

ii. Fourteen (14) single sided panels – 48” H x 36” W

iii. Two (2) single sided panels – 24” H x 72” W

iv. Four (4) single sided panels – 24” H x 48” W

v. Two (2) single sided panels – 24” H x 24” W

vi. Ten (10) single sided panels – 36” H x 36” W

b. The contractor shall provide to the government twenty-three (23) wayside exhibit pedestals as specified to include the following:

i. Seventeen (17) double cantilever pedestals (45 deg)

ii. Five (5) double upright pedestals (90 deg)

iii. One (1) double cantilever pedestal (45 deg)

2. Specifications – Conform to “Wayside Exhibits, A Guide to Developing Outdoor Interpretive

Exhibits” (see attachment), as published by the National Park Service.

a. Signs

i. 24” H x 36” W panels (32)

1. Custom High Pressure Laminate material

2. 1/8” thickness

3. Matte finish, exterior rated

4. Standard eased edge + .03” radius corners

5. No holes

6. NPS Cantilever frame mounting

7. Panels shall have uniform thickness and are commercially flat and without laminations, blisters, open seams, pits, holes, or other defects that may affect their appearance or use.

ii. 48” H x 36” W panels (14)

1. Custom High Pressure Laminate material

2. 1/8” thickness

3. Matte finish, exterior rated

4. Standard eased edge + .03” radius corners

5. No holes

6. NPS Upright frame mounting

7. Panels shall have uniform thickness and are commercially flat and without laminations, blisters, open seams, pits, holes, or other defects that may affect their appearance or use.

iii. 24” H x 72” W panels (2)

1. Custom High Pressure Laminate material

2. 1/8” thickness

Page 1 of 4, SPECS

3. Matte finish, exterior rated

4. Standard eased edge + .03” radius corners

5. No holes

6. NPS Cantilever frame mounting

7. Panels shall have uniform thickness and are commercially flat and without laminations, blisters, open seams, pits, holes, or other defects that may affect their appearance or use.

iv. 24” H x 48” W panels (4)

1. Custom High Pressure Laminate material

2. 1/8” thickness

3. Matte finish, exterior rated

4. Standard eased edge + .03” radius corners

5. No holes

6. NPS Cantilever frame mounting

7. Panels shall have uniform thickness and are commercially flat and without laminations, blisters, open seams, pits, holes, or other defects that may affect their appearance or use.

v. 24” H x 24” W panels (2)

1. Custom High Pressure Laminate material

2. 1/8” thickness

3. Matte finish, exterior rated

4. Standard eased edge + .03” radius corners

5. No holes

6. NPS Cantilever frame mounting

7. Panels shall have uniform thickness and are commercially flat and without laminations, blisters, open seams, pits, holes, or other defects that may affect their appearance or use.

vi. 36” H x 36” W panels (10)

1. Custom High Pressure Laminate material

2. 1/8” thickness

3. Matte finish, exterior rated

4. Standard eased edge + .03” radius corners

5. No holes

6. NPS Upright frame mounting

7. Panels shall have uniform thickness and are commercially flat and without laminations, blisters, open seams, pits, holes, or other defects that may affect their appearance or use.

b. Pedestals

i. Double Cantilever Pedestal (17)

1. Panel frame – 24” H x 36” W, 1/8” thickness

2. All Aluminum construction

3. 2” x 4” posts – 54” long, two (2) each

4. In ground mount

5. Medium brown powder coat

ii. Double Upright Pedestal (5)

1. Panel frame – 48” H x 36” W, 1/8” thickness

2. All Aluminum construction

3. 2” x 4” posts - 94” long, two (2) each

Page 2 of 4, SPECS

4. In ground mount

5. Medium brown powder coat

iii. Double Cantilever Pedestal (1)

1. Panel frame – 24” H x 72” W, 1/8” thickness

2. All Aluminum construction

3. 2” x 4” posts – 54” long, two (2) each

4. In ground mount

5. Medium brown powder coat

3. List of Panels to be Fabricated – (see attachment)

a. 24” H x 36” W panels (32)

i. “The Petrified Forest of the World”

ii. “Path of Least Resistance”

iii. “Water Under the Bridge”

iv. “The New Pangea”

v. “At the Oasis”

vi. “A Canvas for Ideas”

vii. “Life in the Village”

viii. “Whispers from the Past”

ix. “Meaning of Place”

x. “Pioneers of Paleontology”

xi. “Buried in Time”

xii. “Over the Edge”

xiii. “Highway of Dreams”

xiv. “Petrifiquestions Answered”

xv. “Beautiful Building Blocks”

xvi. “When Crystal Forest Was a Forest”

b. 48” H x 36” W panels (14)

i. “Welcome” (north)

ii. “Crystal Forest”

iii. “Long Logs & Agate House”

iv. “Wilderness Area Hiking”

v. “Giant Logs”

vi. “Welcome“ (south)

vii. “Village on the Rio Puerco”

c. 24” H x 72” W panels (2)

i. No title - ice age graphic

d. 24” H x 48” W panels (4)

i. “The Big Picture”

ii. “First Impressions”

e. 24” H x 24” W panels (2)

i. “The Stone Tree House”

f. 36” H x 36” W panels (10)

i. “Archaeology”

ii. “Ecology”

iii. “Geology”

Page 3 of 4, SPECS

iv. “History”

v. “Paleontology”

4. Submittals

a. Full sized sign proofs for each of the thirty-two (32) unique panel layouts, mailed.

b. CHPL color samples, 8” x 10” images cropped section from full sized panels with the same finish as the final product, mailed.

5. Delivery

a. Panels and pedestals to be crated and shipped to Petrified Forest National Park, 1 Park

Road, Petrified Forest, AZ 86028. Rear loaded delivery only, Monday through Friday, 8:00 am to 4:00 pm, no federal holidays.

6. Warranty

a. The contractor shall guarantee the workmanship against defects in work and material that might appear under normal use for a minimum of ten (10) years warranty for wayside exhibit panels and a minimum of ten (10) years warranty for wayside exhibit pedestals. The warranty period shall commence with final delivery. This shall include all labor and parts at no additional cost to the government.

b. Wayside panels shall have a minimum of ten (10) years warranty against fading, cracking, warping, and delaminating. Wayside pedestals shall have a minimum of ten

(10) years warranty against structural failure including complete corrosion of aluminum.

Exhibit pedestal paint shall have a minimum of one (1) year warranty against fading, chipping, and cracking.

Page 4 of 4, SPECS