A06-Rough_Carpentry.pdf
PDF 77 KB Posted
- Attached to
- BLM-CO STATE BRIDGE BUILDING REMOVAL Federal contract opportunity
- Solicitation number
- 140L1724Q0027
About this file
This document is a technical specification for the rough carpentry work required under the BLM-CO State Bridge Building Removal solicitation.
The specification covers the furnishing and installation of exterior grade timber posts and sheathing to support a salvaged electrical panel and phone system components. The required materials include 4x4 pressure treated southern pine posts, 3/4" exterior grade pressure treated sheathing, and galvanized or stainless steel carriage bolts, nuts, and washers. The work must be constructed plumb and square, with 1/16" oversized holes drilled for the carriage bolts. The work will be measured and paid for on a lump sum basis under the "Wood Panel" pay item.
The related federal contract opportunity is Solicitation Number 140L1724Q0027 issued by the Department of the Interior Bureau of Land Management Colorado Region for the BLM-CO State Bridge Building Removal project. No additional details about the overall contract scope, timeline, or evaluation criteria are provided.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140L1724Q0027_Amd_0002.pdf | ||
| Sol_140L1724Q0027_Amd_0001.pdf | ||
| Sol_140L1724Q0027.pdf | ||
| A06-Location_of_Site.pdf | ||
| B13_-Past_Performance_Questionnaire.doc | DOC document | |
| A06-Building_Demo.pdf | ||
| A06-Building_Details.pdf | ||
| B03-DOL_Wage_Determination.pdf | ||
| A04-SOW.pdf | ||
| A06-Electrical.pdf | ||
| A06-_Existing_Site_Plan.pdf | ||
| A04-BID_Schedule.pdf |
Show all 12
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ROUGH CARPENTRY
State Bridge Building Removal 01/24
06100 - 1
SECTION 06100
PART 1: GENERAL
1.1 SUMMARY
A. Section Includes: Furnishing and installing exterior grade timber posts and sheathing for the purpose of installation of a salvaged electrical panel and phone system components.
1.2 SUBMITTALS
A. General: Submittals shall be according to Section 01009 - General Information and Requirements.
PART 2: PRODUCTS
2.1 LUMBER
A. Pressure Treated Ground Contact Posts: New 4” x 4” nominal dimension, structural grade Southern Pine, pressure treatment 0.15lb/ft3 chemical retention, rated for ground contact, MCA-Micronized Copper Azole treatment method or approved equal. Paintable/stainable.
B. Exterior Grade Sheathing: Commercially purchased, pressure treated with ground contact rating, Yellow Pine or Douglas Fir, 3/4 inch nominal thickness or approved equal. Paintable/stainable.
C. Carriage Bolts, Nuts and Washers: Steel, Grade A, galvanized or stainless steel of the length as shown on the drawings.
PART 3: EXECUTION
3.1 INSTALLATION
A. General: Construct the “Wood Panel” as shown on the drawings. Panel shall be constructed plumb and square. After construction of panel, attach the salvaged material to panel as shown on the drawings and as directed by the Contracting Officer.
B. Drill holes for Carriage Bolts 1/16 inch larger than bolt diameter.
State Bridge Building Removal 01/24
06100 - 2
PART 4: MEASUREMENT AND PAYMENT
4.1 METHOD OF MEASUREMENT
A. Units: The work described in this section will be measured and paid for on a lump sum basis.
4.2 BASIS OF PAYMENT
A. Payment: Prices and payment will be full compensation for the work described in this section. Payment will be made under:
Pay Item Pay Unit
06100(11) Wood Panel . . . . . . . . . . . . . . . Lump Sum
END OF SECTION
File details come from the government source that posted it. Updated .