A04a DI-QCIC-81890.pdf
PDF 22 KB Posted
- Attached to
- Engineering Services Federal contract opportunity
- Solicitation number
- N0016724Q0321
About this file
This document is a Data Item Description (DID) for a Qualification Test Report (QTR). The QTR contains the results of qualification tests performed by the contractor to demonstrate that the system conforms to the performance specifications, work authorization document, or contract requirements. The DID specifies the required format and content for the QTR, including identification of the test article, date and location of the test, test results, the contractor's conclusions, corrective actions, and supporting data.
The related federal contract opportunity is for engineering services to support the initial setup and light-off of the TeamTec Mk III incinerator and shredder system at the Land Based Incinerator Test and Training Site (LBITTS) in West Bethesda, MD. The Department of the Navy, Naval Sea Systems Command intends to award a firm fixed price contract for these services on a sole source basis.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N0016724Q0321 CSS.pdf | ||
| A04 CDRL A001_Qualification Test Report_Signed Engineering Support.pdf | ||
| Sole Source Justification_Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: QUALIFICATION TEST REPORT (QTR) Number: DI-QCIC-81890 Approval Date: 20130118 AMSC Number: N9312 Limitation: N/A DTIC Applicable: N/A GIDEP Applicable: N/A Office of Primary Responsibility: AS/PMA-251 Applicable Forms: N/A
Use/relationship:
The QTR contains the results of the qualification tests performed by the contractor to demonstrate that the system conforms to the performance specifications, work authorization document, or contract requirements.
This Data Item Description (DID) contains format, content, and intended use information for the data product resulting from the work task described in the Statement of Work (SOW).
Requirements:
1. Format. Contractor’s format is acceptable.
2. Content. The QTR shall contain the following:
a. Test article identification and full description of test specimens utilized, including any deviations for the configuration specified in the applicable test plan.
b. Date and location of test or evaluation.
c. The operator who conducted the test.
d. Results obtained, including specific identification and discussion of objectives demonstrated satisfactorily and those not demonstrated satisfactorily.
e. Contractor’s conclusions, corrective action anticipated recommendation to correct deficiencies, and suggested improvements based on evaluation of the test.
f. All analysis and supporting data.
g. All data sheets.
3. End of DI-QCIC-81890.
Source: http://assist.dla.mil -- Downloaded: 2024-07-11T17:30Z Check the source to verify that this is the current version before use.
File details come from the government source that posted it. Updated .