A04d DI-QCIC-81890.pdf
PDF 23 KB Posted
- Attached to
- Testing of spooled solid wire welding Federal contract opportunity
- Solicitation number
- N0016724Q0160
About this file
This document is a Data Item Description (DID) for a Qualification Test Report (QTR). The QTR contains the results of qualification tests performed by the contractor to demonstrate that the system conforms to the specified performance requirements, work authorization document, or contract requirements. The DID outlines the required format and content of the QTR, which includes test article identification, test dates and locations, operator information, test results, the contractor's conclusions and recommended corrective actions, and all supporting data and analysis.
The related federal contract opportunity is for testing of spooled solid wire welding electrodes using government-furnished steel rod coil. The solicitation is being issued by the Naval Surface Warfare Center Carderock Division (NSWCCD) under the Department of the Navy Naval Sea Systems Command. The contract will include options to purchase these testing services.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N0016724Q0160 Steel Filler Wire CSS rev.docx | DOCX document | |
| N0016724Q0160 Steel Filler Wire CSS.docx | DOCX document | |
| A04b DID 80441D GFP Inventory Report.pdf | ||
| A04a CDRL A001 GFP Report_signed.pdf | ||
| A04c CDRL A002_Qualification Test Report_signed.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: QUALIFICATION TEST REPORT (QTR) Number: DI-QCIC-81890 Approval Date: 20130118 AMSC Number: N9312 Limitation: N/A DTIC Applicable: N/A GIDEP Applicable: N/A Office of Primary Responsibility: AS/PMA-251 Applicable Forms: N/A
Use/relationship:
The QTR contains the results of the qualification tests performed by the contractor to demonstrate that the system conforms to the performance specifications, work authorization document, or contract requirements.
This Data Item Description (DID) contains format, content, and intended use information for the data product resulting from the work task described in the Statement of Work (SOW).
Requirements:
1. Format. Contractor’s format is acceptable.
2. Content. The QTR shall contain the following:
a. Test article identification and full description of test specimens utilized, including any deviations for the configuration specified in the applicable test plan.
b. Date and location of test or evaluation.
c. The operator who conducted the test.
d. Results obtained, including specific identification and discussion of objectives demonstrated satisfactorily and those not demonstrated satisfactorily.
e. Contractor’s conclusions, corrective action anticipated recommendation to correct deficiencies, and suggested improvements based on evaluation of the test.
f. All analysis and supporting data.
g. All data sheets.
3. End of DI-QCIC-81890.
Source: http://assist.dla.mil -- Downloaded: 2024-03-07T20:56Z Check the source to verify that this is the current version before use.
File details come from the government source that posted it. Updated .