A013 DID - TDP - Tooling.pdf

DATA ITEM DESCRIPTION

Title: SPECIAL TOOLING (ST) ENGINEERING DESIGN DATA AND ASSOCIATED LISTS Number: DI-SESS-81008F Approval Date: 20190417

AMSC Number: 10020 Limitation:

DTIC Applicable: GIDEP Applicable:

Preparing Activity: AR Project Number: SESS-2019-027 Applicable Forms:

Use/relationship: Special Tooling Engineering Design Data and Associated Lists provide the data required for the limited production of special tooling which duplicates the physical and performance characteristics of the original special tooling.

a. This Data Item Description (DID) contains the format and content preparation instructions for

Special Tooling Engineering Design Data and Associated Lists resulting from the work task described by 5.4.3 of MIL-STD-31000.

b. This DID is applicable to acquisition of military systems, equipment, and components which require the use of special tooling to achieve the engineering requirements of the item.

c. This DID supersedes DI-SESS-81008E.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. General. Special Tooling Engineering Design Data and Associated Lists shall meet the requirements of MIL-STD-31000 and shall be in accordance with, ASME Y14.100, or, if applicable, ASME Y14.100 and Appendices B through E, as required, ASME Y14.34, and ASME Y14.41.

3. Format. Special Tooling Engineering Design Data and Associated Lists shall be in contractor or

Government format or as specified in the contract or purchase order.

4. Content. Special Tooling Engineering Design Data and Associated Lists shall provide the design disclosure information necessary to permit the manufacture of tooling that duplicates the functions of the original Special Tooling. Special Tooling Engineering Design Data and Associated Lists shall provide:

a. Details of processes which are not published or generally available to industry, when these processes are mandatory to achieving the engineering requirements of the tooling.

b. Performance ratings and tolerances.

c. Dimensions and tolerances

d. Critical manufacturing processes and assembly sequences.

e. Toleranced input and output characteristics.

f. Diagrams.

g. Mechanical and electrical connections.

h. Physical characteristics, including form and finish requirements.

Source: http://assist.dla.mil -- Downloaded: 2019-08-30T20:13Z Check the source to verify that this is the current version before use.

DI-SESS-81008F

i. Details of material identification, including heat treatment and protective coatings.

j. Calibration information.

k. Environmental requirements.

l. Reliability requirements.

m. Maintainability requirements.

5. Selection of engineering design data. The types of engineering design data and associated lists to be prepared shall be selected from ASME Y14.24 and ASME Y14.34. The applicable TDP Option

Selection Worksheet incorporated in the contract or purchase order will specify whether the contractor or the Government is responsible for selecting the types of engineering design data and associated lists to be prepared.

6. CAGE Code and document numbers. Special Tooling Engineering Design Data and Associated Lists shall be identified with the contractor's CAGE Code and contractor document numbers or with a

Government CAGE Code and Government document numbers as specified in the applicable TDP

Option Selection Worksheet incorporated in the contract.

7. Control drawings. Vendor items used in the Special Tooling without alteration, selection, or source qualification shall be identified on Special Tooling Drawings and lists by the manufacturer's CAGE

Code and part or identifying number. Vendor Item Control Drawings are not required for vendor items.

When vendor items must be altered, selected, or required source qualification prior to use in the ST, they shall be documented on Altered Item, Selected Item, or Source Control Drawings in accordance with ASME Y14.100 and ASME Y14.24.

End of DI-SESS-81008F.

Source: http://assist.dla.mil -- Downloaded: 2019-08-30T20:13Z Check the source to verify that this is the current version before use.