A.02.03 - Special Notice - Proprietary Hardware COMH_NOI_RTA_ attachment.pdf

CONSOLIDATED OPERATIONS AND MAINTENANCE HANGAR W91236-21-R-2003

Langley Air Force Base

SECTION 08 71 00

DOOR HARDWARE

02/16

PART 1 GENERAL

1.1 REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.

ASTM INTERNATIONAL (ASTM)

ASTM E283 (2019) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

ASTM F883 (2013) Padlocks

BUILDERS HARDWARE MANUFACTURERS ASSOCIATION (BHMA)

ANSI/BHMA A156.1 (2016) Butts and Hinges

ANSI/BHMA A156.3 (2014) Exit Devices

ANSI/BHMA A156.4 (2013) Door Controls - Closers

ANSI/BHMA A156.5 (2014) Cylinder and Input Devices for Locks

ANSI/BHMA A156.6 (2015) Architectural Door Trim

ANSI/BHMA A156.7 (2016) Template Hinge Dimensions

ANSI/BHMA A156.8 (2015) Door Controls - Overhead Stops and Holders

ANSI/BHMA A156.13 (2017) Mortise Locks & Latches Series 1000

ANSI/BHMA A156.15 (2015) Release Devices Closer Holder, Electromagnetic and Electromechanical

ANSI/BHMA A156.16 (2018) Auxiliary Hardware

ANSI/BHMA A156.18 (2016) Materials and Finishes

ANSI/BHMA A156.19 (2013) Power Assist & Low Energy Power Operated Doors

ANSI/BHMA A156.21 (2019) Thresholds

ANSI/BHMA A156.22 (2017) Door Gasketing and Edge Seal Systems

ANSI/BHMA A156.24 (2012) Delayed Egress Locking Systems

SECTION 08 71 00 Page 1

ANSI/BHMA A156.25 (2013) Electrified Locking Devices

ANSI/BHMA A156.26 (2012) Continuous Hinges

ANSI/BHMA A156.29 (2012) Exit Locks, Exit Alarms, Alarms for Exit Devices

ANSI/BHMA A156.30 (2014) High Security Cylinders

ANSI/BHMA A156.36 (2010) Auxiliary Locks

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)

NFPA 70 (2020; ERTA 20-1 2020; ERTA 20-2 2020; TIA

20-1; TIA 20-2; TIA 20-3; TIA 20-4)

National Electrical Code

NFPA 72 (2019; TIA 19-1; ERTA 2019) National Fire Alarm and Signaling Code

NFPA 80 (2016; TIA 16-1) Standard for Fire Doors and Other Opening Protectives

NFPA 101 (2018; ERTA 18-1; ERTA 18-2; ERTA 18-3;

ERTA 18-4; TIA 18-1; TIA 18-2; TIA 18-3;

TIA 18-4) Life Safety Code

NFPA 252 (2017) Standard Methods of Fire Tests of Door Assemblies

STEEL DOOR INSTITUTE (SDI/DOOR)

SDI/DOOR A250.8 (2003; R2008) Recommended Specifications for Standard Steel Doors and Frames

U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)

36 CFR 1191 Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities; Architectural Barriers Act (ABA) Accessibility Guidelines

UNDERWRITERS LABORATORIES (UL)

UL Bld Mat Dir (updated continuously online) Building Materials Directory

1.2 SUBMITTALS

Government approval is required for submittals with a "G" designation;

submittals not having a "G" designation are for Contractor Quality Control approval. When used, a designation following the "G" designation identifies the office that will review the submittal for the Government.

"G, AE" code is applied where Architect/Engineer review and approval is required. "G, RO" code is applied where Government, Resident Office review and approval is required. Submittals with an "S" are for inclusion in the Sustainability eNotebook, in conformance with Section 01 33 29 SUSTAINABILITY REPORTING. Submit the following in accordance with Section

SECTION 08 71 00 Page 2

01 33 00 SUBMITTAL PROCEDURES:

SD-02 Shop Drawings

Manufacturer's Detail Drawings; G , AE

Verification of Existing Conditions; G , AE

Hardware Schedule; G , AE

Keying System; G , AE

SD-03 Product Data

Hardware Items; G , AE

SD-08 Manufacturer's Instructions

Installation

SD-10 Operation and Maintenance Data

Hardware Schedule Items, Data Package 1; G , AE

SD-11 Closeout Submittals

Key Bitting

1.3 SHOP DRAWINGS

Submit manufacturer's detail drawings indicating all hardware assembly components and interface with adjacent construction. Indicate power components and wiring coordination for electrified hardware. Base shop drawings on verified field measurements and include verification of existing conditions.

1.4 PRODUCT DATA

Indicate fire-ratings at applicable components. Provide documentation of ABA/ADA accessibility compliance of applicable components, as required by 36 CFR 1191 Appendix D - Technical.

1.5 HARDWARE SCHEDULE

Prepare and submit hardware schedule in the following form:

Hardware Item

Quantity Size Reference Publi-cation Type No.

Finish Mfr Name and Catalog No.

Key Control Symbols

UL

Mark (If fire-rated and listed)

BHMA Finish Desig-nation

In addition, submit hardware schedule data package 1 in accordance with Section 01 78 23 OPERATION AND MAINTENANCE DATA.

SECTION 08 71 00 Page 3

1.6 KEY BITTING CHART REQUIREMENTS

1.6.1 Requirements

Submit key bitting charts to the Contracting Officer prior to completion of the work. Include:

a. Complete listing of all keys (e.g. AA1 and AA2).

b. Complete listing of all key cuts (AA1-123456, AA2-123458).

c. Tabulation showing which key fits which door.

d. Copy of floor plan showing doors and door numbers.

e. Listing of 20 percent more key cuts than are presently required in each master system.

1.7 QUALITY ASSURANCE

1.7.1 Hardware Manufacturers and Modifications

Provide, as far as feasible, locks, hinges, and closers of one lock, hinge, or closer manufacturer's make. Modify hardware as necessary to provide features indicated or specified.

1.7.2 Key Shop Drawings Coordination Meeting

Prior to the submission of the key shop drawing, the Contracting Officer, Contractor, Door Hardware Subcontractor, using Activity and Base Locksmith must meet to discuss and coordinate key requirements for the facility.

1.8 DELIVERY, STORAGE, AND HANDLING

Deliver hardware in original individual containers, complete with necessary appurtenances including fasteners and instructions. Mark each individual container with item number as shown on hardware schedule.

Deliver permanent keys and removable cores to the Contracting Officer, either directly or by certified mail. Deliver construction master keys with the locks.

PART 2 PRODUCTS

2.1 MATERIALS

Hardware sets listed for various components are per BHMA standards.

Contractor must submit items that provide identical performance and functional characteristics. Final Approval subject to government approval for technical performance and specific functionality, including compatibility with other components required to function as part of the Access Control and Life Safety systems, and owner requirements for cores and keying.

2.2 TEMPLATE HARDWARE

Hardware applied to metal or to prefinished doors must be manufactured using a template. Provide templates to door and frame manufacturers in accordance with ANSI/BHMA A156.7 for template hinges. Coordinate hardware items to prevent interference with other hardware.

SECTION 08 71 00 Page 4

2.3 HARDWARE FOR FIRE DOORS AND EXIT DOORS

Provide all hardware necessary to meet the requirements of NFPA 72 for door alarms, NFPA 80 for fire doors, NFPA 101 for exit doors, NFPA 252 for fire tests of door assemblies, ABA/ADA accessibility requirements, and all other requirements indicated, even if such hardware is not specifically mentioned in paragraph HARDWARE SCHEDULE. Provide Underwriters Laboratories, Inc. labels for such hardware in accordance with UL Bld Mat Dir or equivalent labels in accordance with another testing laboratory approved in writing by the Contracting Officer.

2.4 HARDWARE ITEMS

Clearly and permanently mark with the manufacturer's name or trademark, hinges, pivots, locks, latches, exit devices, bolts and closers where the identifying mark is visible after the item is installed. For closers with covers, the name or trademark may be beneath the cover. Coordinate electrified door hardware components with corresponding components specified in Division 28 ELECTRONIC SECURITY SYSTEMS (ESS).

2.4.1 Hinges

Provide in accordance with ANSI/BHMA A156.1 . Provide concealed bearing hinges that are 4-1/2 by 4-1/2 inch unless otherwise indicated. Construct loose pin hinges for interior doors and reverse-bevel exterior doors so that pins are non-removable when door is closed. Provide lifetime warranty.

2.4.2 Continuous Hinges

Where continuous hinges are required, provide in accordance with ANSI/BHMA A156.26 . Provide protected lip design and lifetime warranty.

2.4.3 Locks and Latches

2.4.3.1 Mortise Locks

Locks shall have solid one-piece stainless steel lachbolt. Lever trim shall be similar to "Best" #14N with protected cylinder. Provide manufacturer's lifetime warranty.

2.4.3.2 Mortise Locks and Latches

Provide in accordance with ANSI/BHMA A156.13 , Series 1000, Operational Grade 1, Security Grade 2. Provide mortise locks with escutcheons not less than 7 by 2-1/4 inch with a bushing at least 1/4 inch long. Cut escutcheons to fit cylinders and provide trim items with straight, beveled, or smoothly rounded sides, corners, and edges.

2.4.3.3 Auxiliary Locks

Provide in accordance with ANSI/BHMA A156.36 , Grade 1.

2.4.3.4 Combination Locks

Provide as specified.

SECTION 08 71 00 Page 5

2.4.4 Exit Devices

Touchpad and endcap to be ramped in direction of egress to proevent hooking of carts, uniforms, ruck sacks and equipement. Touchpad to be "T" style to prevent pinching of fingers. Devices shall have lifetime warranty or be certified to 10,000,00 cycles.

Provide in accordance with ANSI/BHMA A156.3 , Grade 1. Provide adjustable strikes for rim type and vertical rod devices.

Include stainless steel fasteners and screws.

2.4.5 Exit Locks With Alarm

Provide in accordance with ANSI/BHMA A156.3 and ANSI/BHMA A156.29 , Type E0431 (with full width horizontal actuating bar) for single doors; Type E0431 (with actuating bar) or E0471 (with actuating bar and top and bottom bolts, both leaves active) for pairs of doors, unless otherwise specified.

Provide terminals for connection to remote indicating panel. Provide door alarms integrated with the fire alarm system in accordance with NFPA 72 .

Confirm with Accrediting Officer prior to final order.

2.4.6 Cylinders and Cores

Provide cylinders for new locks, including locks provided under other sections of this specification. Provide fully compatible cylinders of Grade 1 products from products of one manufacturer with interchangeable cores that are removable by a special control key. Factory set the cores with seven pin tumblers using the Coremax keyway as basis of design.

Submit a core code sheet with the cores. Provide master keyed cores in one system for this project. Provide construction interchangeable cores.

2.4.6.1 High Security Cylinders

Provide in accordance with ANSI/BHMA A156.30 , security level A for all high security cylinder components.

2.4.7 Push Button Mechanisms

Provide in accordance with ANSI/BHMA A156.5 , Grade 1.

2.4.8 Electrified Hardware

Comply with the requirements of NFPA 70 for wiring of electrified hardware.

2.4.8.1 Electrified Mortise Locks

Provide in accordance with ANSI/BHMA A156.25 , Grade 1. Provide electrified mortise locks that remain secure during power failure.

Provide facility interface devices that use dc power to energize solenoids. Provide solenoids, resisters, and signal switches as specified. Products shall be manufactured by mechanical lock manufacturer.

2.4.8.1.1 Power Transfer Hinges

Provide power transfers with each electrified lock that route power and monitoring signals from the lockset to the door frame. Coordinate power transfer hinges with door frames.

SECTION 08 71 00 Page 6

2.4.8.2 Access Control Hardware

Provide as specified.

2.4.8.3 Release Devices

In accordance with ANSI/BHMA A156.15 , Grade 1.

2.4.8.3.1 Closer Holders

Provide as specified.

2.4.8.4 Power Assist and Low Energy Power Operated Doors

Provide in accordance with ANSI/BHMA A156.19 , Grade 1. Provide as specified.

2.4.8.5 Delayed Egress Locking System

Provide in accordance with ANSI/BHMA A156.24 , Grade 1.

2.4.9 Keying System

Provide an extension of the existing keying system. Existing locks were manufactured by Best and have interchangeable cores. Provide construction interchangeable cores. Provide key cabinet as specified.

Provide temporary cores and keys for the Contractor's use during construction, and for testing of locksets.

2.4.10 Lock Trim

Provide cast, forged, or heavy wrought construction and commercial plain design for lock trim.

2.4.10.1 Lever Handles

Provide as specified. Provide in accordance with ANSI/BHMA A156.3 for mortise locks of lever handles for exit devices. Provide lever handle locks with a breakaway feature (such as a weakened spindle or a shear key) to prevent irreparable damage to the lock when force in excess of that specified in ANSI/BHMA A156.13 is applied to the lever handle. Provide lever handles return to within 1/2 inch of the door face.

2.4.10.2 Texture

Provide knurled or abrasive coated knobs or lever handles for doors which are accessible to blind persons and which lead to dangerous areas.

2.4.11 Keys

Furnish one file key, one duplicate key, and one working key for each key change and for each master keying system. Furnish one additional working key for each lock of each keyed-alike group. Furnish 3 great grand master keys, 25 construction master keys,and 2 control keys for removable cores.

Furnish a quantity of key blanks equal to 20 percent of the total number of file keys. Stamp and serialize each key with appropriate key control symbol and "U.S. property - do not duplicate." Do not place room number on keys.

SECTION 08 71 00 Page 7

2.4.12 Door Bolts

Provide in accordance with ANSI/BHMA A156.16 . Provide dustproof strikes for bottom bolts, except at doors having metal thresholds. Provide automatic latching flush bolts in accordance with ANSI/BHMA A156.3 , Type 25.

2.4.13 Closers

Provide in accordance with ANSI/BHMA A156.4 , Series C7200, Grade 1, with PT 4C. Provide with brackets, arms, mounting devices, and fasteners.

Size closers in accordance with manufacturer's printed recommendations, or provide multi-size closers, Sizes 1 through 6, and list sizes in the Hardware Schedule. Provide manufacturer's lifetime warranty.

2.4.14 Overhead Holders

Provide in accordance with ANSI/BHMA A156.8 . Provide units which are stainless steel with no plastic components.

2.4.15 Door Protection Plates

Provide in accordance with ANSI/BHMA A156.6 .

2.4.15.1 Sizes of Mop and Kick Plates

2 inch less than door width for single doors; 1 inch less than door width for pairs of doors. Heavy duty closers shall be cast iron with 1.5" minimum bore. Provide 8 inch kick plates for flush doors. Provide 4 inch mop plates.

2.4.15.2 Edge Guards

Stainless steel, of same height as armor plates. Apply to hinge stile and lock stile.

2.4.16 Door Stops and Silencers

Provide in accordance with ANSI/BHMA A156.16 . Silencers Type L03011.

Provide three silencers for each single door, two for each pair.

2.4.17 Padlocks

Provide in accordance with ASTM F883 and as specified. Masterkeyed to building master.

2.4.18 Thresholds

Provide in accordance with ANSI/BHMA A156.21 . Use J35100, with silicone rubber insert in face of stop, for exterior doors opening out, unless specified otherwise. Provide adjustable stop as indicated.

2.4.19 Weatherstripping Gasketing

Provide in accordance with ANSI/BHMA A156.22 . Provide the type and function designation where specified in paragraph HARDWARE SCHEDULE.

Provide a set to include head and jamb seals, sweep strips, and, for pairs of doors. Air leakage of weatherstripped doors not to exceed 0.5 cubic

SECTION 08 71 00 Page 8 feet per minute of air per square foot of door area when tested in accordance with ASTM E283. Provide weatherstripping with one of the following:

2.4.19.1 Extruded Aluminum Retainers

Extruded aluminum retainers not less than 0.050 inch wall thickness with vinyl, neoprene, silicone rubber, or polyurethane inserts. Provide clear anodized aluminum.

2.4.20 Soundproofing Gasketing

Provide in accordance with ANSI/BHMA A156.22 . Provide adjustable doorstops at heads,jambs and automatic door bottoms in accordance with the hardware set, of extruded aluminum, clear anodized, surface applied, with vinyl fin seals between plunger and housing. Provide doorstops with solid silicone rubber, or closed cell sponge gasket. Provide door bottoms with adjustable operating rod and silicone rubber or closed cell sponge neoprene gasket. Provide doorstops that are mitered at corners. Provide type and function designation where specified in paragraph HARDWARE SETS.

2.4.21 Rain Drips

Provide in accordance with ANSI/BHMA A156.22 . Provide extruded aluminum rain drips, not less than 0.08 inch thick, clear anodized finish.

Provide rain drips with a 4 inch overlap on each side of each exterior door that is not protected by an awning, roof, eave or other horizontal projection. Set drips in sealant and fasten with stainless steel screws.

2.4.21.1 Door Rain Drips

Approximately 1-1/2 inch high by 5/8 inch projection. Align bottom with bottom edge of door.

2.4.21.2 Overhead Rain Drips

Approximately 1-1/2 inch high by 2-1/2 inch projection. Align center with door frame rabbet.

2.4.22 Auxiliary Hardware (Other than locks)

Provide in accordance with ANSI/BHMA A156.16 , Grade 1.

2.4.23 Special Tools

Provide special tools, such as spanner and socket wrenches and dogging keys, as required to service and adjust hardware items.

2.5 FASTENERS

Provide fasteners of type, quality, size, and quantity appropriate to the specific application. Fastener finish to match hardware. Provide stainless steel or nonferrous metal fasteners in locations exposed to weather. Verify metals in contact with one another are compatible and will avoid galvanic corrosion when exposed to weather.

2.6 FINISHES

Provide in accordance with ANSI/BHMA A156.18 . Provide hardware in BHMA

SECTION 08 71 00 Page 9

630 finish (satin stainless steel), unless specified otherwise. Provide items not manufactured in stainless steel in BHMA 626 finish (satin chromium plated) over brass or bronze, except aluminum paint finish for surface door closers, and except BHMA 652 finish (satin chromium plated) for steel hinges. Provide hinges for exterior doors in stainless steel with BHMA 630 finish. Furnish exit devices in BHMA 630 finish. Match exposed parts of concealed closers to lock and door trim. Match hardware finish for aluminum doors to the doors.

2.7 KEY CABINET AND CONTROL SYSTEM

Provide in accordance with ANSI/BHMA A156.5 , Type required to yield a capacity (number of hooks) 50 percent greater than the number of key changes used for door locks.

PART 3 EXECUTION

3.1 INSTALLATION

Provide hardware in accordance with manufacturers' printed installation instructions. Fasten hardware to wood surfaces with full-threaded wood screws or sheet metal screws. Provide machine screws set in expansion shields for fastening hardware to solid concrete and masonry surfaces.

Provide toggle bolts where required for fastening to hollow core construction. Provide through bolts where necessary for satisfactory installation.

3.1.1 Weatherstripping Installation

Provide full contact, weathertight seals that allow operation of doors without binding the weatherstripping.

3.1.1.1 Stop Applied Weatherstripping

Fasten in place with color matched sheet metal screws not more than 9 inch on center after doors and frames have been finish painted.

3.1.2 Soundproofing Installation

Provide as specified for stop applied weatherstripping.

3.1.3 Threshold Installation

Extend thresholds the full width of the opening and notch end for jamb stops. Set thresholds in a full bed of sealant and anchor to floor with cadmium-plated, countersunk, steel screws in expansion sleeves. For aluminum thresholds placed on top of concrete surfaces, coat the underside surfaces that are in contact with the concrete with fluid applied waterproofing as a separation measure prior to placement.

3.2 FIRE DOORS AND EXIT DOORS

Provide hardware in accordance with NFPA 72 for door alarms, NFPA 80 for fire doors, NFPA 101 for exit doors, and NFPA 252 for fire tests of door assemblies.

3.3 HARDWARE LOCATIONS

Provide in accordance with SDI/DOOR A250.8 , unless indicated or specified

SECTION 08 71 00 Page 10 otherwise.

a. Kick Plates: Push side of single-acting doors. Both sides of double-acting doors.

b. Mop Plates: Bottom flush with bottom of door.

3.4 KEY CABINET AND CONTROL SYSTEM

Locate where directed. Tag one set of file keys and one set of duplicate keys. Place other keys in appropriately marked envelopes, or tag each key. Provide complete instructions for setup and use of key control system. On tags and envelopes, indicate door and room numbers or master or grand master key.

3.5 FIELD QUALITY CONTROL

After installation, protect hardware from paint, stains, blemishes, and other damage until acceptance of work. Submit notice of testing 15 days before scheduled, so that testing can be witnessed by the Contracting Officer. Adjust hinges, locks, latches, bolts, holders, closers, and other items to operate properly. Demonstrate that permanent keys operate respective locks, and give keys to the Contracting Officer. Correct, repair, and finish, errors in cutting and fitting and damage to adjoining work.

3.6 HARDWARE SETS

Provide hardware for aluminum doors under this section. Deliver Hardware templates and hardware, except field applied hardware, to the aluminum door and frame manufacturer for use in fabricating doors and frames.

-- End of Section --

SECTION 08 71 00 Page 11

SECTION 08 71 00

DOOR HARDWARE

Hardware Sets

Manufacturer List

CodeName AB ABH Manufacturing Inc.

BE Best Access Systems BY By Others IAS Integrated Access Solutions MA Magnasphere NA National Guard PR Precision SH Stanley Commercial Hardware TR Trimco

SET #COMH 1 – Exterior

Doors: 101B, 107B, 108B, 141A, S2C

1 Continuous Hinge A31011G 628 1 Exit Device TYPE 3 FUNC. 8 X CD DS 630AM 1 Mortise Cylinder 1E-74 PATD 626 BE 1 Door Closer C72061 PT4C/D/F/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Threshold J35100 X ADJUSTABLE STOP X SPONGE SIL. 628 1 Door Sweep R3A436 A 1 Weatherstrip 700 ES NA 1 Rain Drip 16A

SET #COMH 2 - Overhead

Doors: 133B, 158C

1 Padlock 41B-722T PATD M1 606 BE 1 Mortise Cylinder 1E-74 PATD 626 BE

Note: Cylinder for key switch. Padlock for track.

SET #COMH 3

Doors: 154A, S1A, S1B, S2A, S2B, S2D

1 Continuous Hinge A31011G 628 1 Exit Device TYPE 3 FUNC. 8 X FL 630AM 1 Mortise Cylinder 1E-74 PATD 626 BE 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Gasketing R0C114 1 Auto Door Bottom R1U323

SET #COMH 4

Doors: 102B, 106C

3 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Lockset F05 (45H-7R14N PATD) 630AM 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE DA 689 1 Kick Plate J103 8" 630 1 Gasketing R0C114

SET #COMH 5 - Push Button Lockset

Doors: 140A, 155A, 157A, 158A, 159A

2 Continuous Hinge A31011G 628 1 Set Auto Flush Bolts 4.4 TYPE 25 (3810) 630 1 Dustproof Strike LO4021 (3911) 630 1 Keypad Lock 45HZ-7DV14KP PATD 626AM BE 1 Coordinator 4.1.1 TYPE 21 X FILLER X BRACKETS 689 2 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE DA 689 2 Armor Plate J101 34" 630 2 Frame Guard FG8000-36 630 TR 1 Gasketing R0C114

SET #COMH 6 – Exterior, Monitored

Doors: 104B EXTERIOR, 131B

2 Continuous Hinge A31011G 628 2 Exit Device TYPE 8 FUNC. 8 X CD DS 630AM 2 Rim Cylinder 12E-72 PATD 626 BE 2 Mortise Cylinder 1E-74 PATD 626 BE 2 Door Closer C72061 PT4C/D/F/H X 1.5” BORE 689

2 Kick Plate J103 8" 630 2 Door Sweep R3A436 A 1 Weatherstrip 700 ES NA 1 Astragal 110 SA x 110SA NA 1 Threshold J35100 X ADJUSTABLE STOP X SPONGE SIL. 628

SET #COMH 7 - Monitored

Doors: 104A

2 Continuous Hinge A31011G 628 2 Power Transfer PT1000 689 AB 1 Exit Device TYPE 8 FUNC. 8 X DS TS FL 630AM 1 Exit Device TYPE 8 FUNC. 8 X FL ELR DS TS 630AM 2 Rim Cylinder 12E-72 PATD 626 BE 1 Card Reader BY SECURITY 1 Power Supply ELR151 PR 1 Terminal Interface Enclosure TIE1000 600 IAS 2 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE 689 2 Kick Plate J103 8" 630 2 Door Sweep R3A436 A 1 Weatherstrip 700 ES NA 1 Threshold J35100 X ADJUSTABLE STOP X SPONGE SIL. 628 2 Door Contact MSS SERIES MA

SET #COMH 8 - Exterior, Pair, Not Monitored

Doors: 001A, 003A

2 Continuous Hinge A31011G 628 1 Dustproof Strike LO4021 (3911) 630 1 Auto Flush Bolts 4.4 TYPE 25 (4.4 TYPE 25 (3820)) 630 1 Deadlock EO6091 (48H-7R PATD) 626 2 Flush Pull J403 6” (1111C) 630AM 2 Door Closer C72061 PT4C/D/F/H X 1.5” BORE DA 689 2 Kick Plate J103 8" 630 2 Door Sweep R3A436 A 1 Weatherstrip 700 ES NA 1 Astragal 158 SA NA 1 Threshold J35100 X ADJUSTABLE STOP X SPONGE SIL. 628 1 Rain Drip 16A

SET #COMH 9 – Exterior, Not Monitored

Doors: 002A

2 Continuous Hinge A31011G 628 1 Dustproof Strike LO4021 (3911) 630 1 Auto Flush Bolts 4.4 TYPE 25 (3820) 630 1 Exit Device TYPE 3 FUNC. 8 X DS 630AM 1 Flush Pull J403 6” (1111C) 630AM 2 Door Closer C72061 PT4C/D/F/H X 1.5” BORE 689 2 Door Sweep R3A436 A 1 Weatherstrip 700 ES NA 1 Astragal 158 SA 1 Threshold J35100 X ADJUSTABLE STOP X SPONGE SIL. 628

SET #COMH 10

Doors: 126A, 127A, 142B, 158B

3 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Lockset F05 (45H-7R14N PATD) 630AM 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE DA 689 1 Kick Plate J103 8" 630 1 Gasketing R0C114

SET #COMH 11 – Air Showers

Doors: 150A, 151A, 120A, 121A

1 Continuous Hinge A31011G 628 1 Power Transfer PT1000 630 AB 1 Electrified Lockset, Fail Safe 45HW-7TWEL14N PATD RQE DS 630AM BE 1 Door Closer C72011 PT4C/D/F/H X 1.5” BORE 689 1 Kick Plate J103 8" 63 1 Mop Plate J102 4” 630 1 Wall Stop LO2251 626 1 Gasketing R0C114 1 Auto Door Bottom R1U323 1 Door Contact MSS SERIES MA 1 Electrical Schematic COMH11SCHAERT250 BE

SET #COMH 12 - Exterior, Exit Only, Monitored

Doors: S1C

1 Continuous Hinge A31011G 628 1 Exit Device TYPE 1 FUNC. 1 DS 630AM 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Door Sweep R3A436 A 1 Weatherstrip 700 ES NA 1 Threshold J35100 X ADJUSTABLE STOP X SPONGE SIL. 628

SET #COMH 13 - Exterior, Aluminum, Monitored

Doors: 140C, 160A

1 Continuous Hinge A31011G 628 1 Exit Device TYPE 4 FUNC. 3CD DS 630AM 1 Mortise Cylinder 1E-74 PATD 626 BE 1 Rim Cylinder 12E-72 PATD 626 BE 1 Door Closer C72061 PT4C/D/F/H X 1.5” BORE DA 689 1 Door Sweep R3A436 A 1 Threshold 896 S 628

SET #COMH 14 - Exterior, Mechanical Yard

Doors: 000A

2 Continuous Hinge A31011G 628 2 Locking Surface Bolts N1805L 626 AB

SET #COMH 15 – Exterior, Monitored

Doors: 004A

1 Continuous Hinge A31011G 628 1 Exit Device TYPE 1 FUNC. 3 DS 630AM 1 Rim Cylinder 12E-72 PATD 626 BE 1 Flush Pull J403 6” (1111C) 630AM 1 Door Closer C72061 PT4C/D/F/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Door Sweep R3A436 A 1 Weatherstrip 700 ES NA

SET #COMH 16 - Push Button Lockset

Doors: 112A, 112B, 133A, 134A, 137A

1 Continuous Hinge A31011G 628 1 Mechanical Keypad Lock 45HZ-7DV14KP PATD 626AM BE 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE 689 1 Armor Plate J101 34" 630 2 Frame Guard FG8000-36 630 TR 1 Gasketing R0C114 1 Auto Door Bottom R1U323

SET #COMH 17 - Office

Doors: 132A, 136A, 137A, 161A, 162A

3 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Lockset F20 (45H-7AB14N PATD) 630AM 1 Door Closer C72051 PT4C/D/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Wall Bumper LO2251 626 1 Gasketing R0C114 1 Coat Hook AM801 AB

SET #COMH 18 - Passage

Doors: 122A, 123A, 124A, 125A, 128A, 129A, 130A, 142A, 143A, 144A, 156A, 224A, 225A, 226A, 227A, 230A, 3 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Passage Set F01 (45H-0N14N) 630AM 1 Door Closer C72051 PT4C/D/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Mop Plate J102 4" 630 1 Wall Bumper LO2251 626 1 Gasketing R0C114

SET #COMH 19

Doors: 114A

6 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Dustproof Strike LO4021 (3911) 630 1 Auto Flush Bolts 4.4 TYPE 25 (3820) 630 1 Exit Device TYPE 3 FUNC. 8 X FL 630AM

1 Mortise Cylinder 1E-74 PATD 626 BE 1 Coordinator 4.1.1 TYPE 21 689 2 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE 689 1 Gasketing 2525

NOTE: Astragal by door manufacturer.

SET #COMH 20

Doors: 105A, 152A, 217A, 228A, 229A, 250A

3 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Lockset F05 (45H-7R14N PATD) 630AM 1 Wall Bumper LO2251 626 3 Door Silencers LO3011 GREY

SET #COMH 21 - Always Locked

Doors: 153A

3 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Lockset F07 (45H-7D14N PATD) 630AM 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE DA 689 1 Kick Plate J103 8" 630 1 Gasketing R0C114

SET #COMH 22

Doors: 201A, 202A, 204A, 205A, 205B, 206A, 207A, 210A, 212A, 213A, 214A, 215A, 216A, 218A, 220A, 222A, 231A, 253A

3 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Lockset F20 (45H-7AB14N PATD) 630AM 1 Wall Bumper LO2251 626 1 Gasketing R0C114 1 Auto Door Bottom 4447 S NA 1 Coat Hook AM801 AB

SET #COMH 23 - Man Trap, Access Controlled, Card Reader

Doors: 232A, 232B

1 Continuous Hinge A31011G 628 1 Power Transfer PT1000 689 AB 1 Card Reader BY SECURITY

1 Electro-mech Lock 45HW-7TDEU14N PATD DS LS RQE 630AM BE 1 Spin Dial Lockset FED SPEC 2740B PROVIDED BY OWNER (232B ONLY) 1 Door Contact MSS SERIES (232B ONLY) MA 1 Closer C72011 PT4C/D/F/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Terminal Interface Enclosure TIE1000 IAS 1 Gasketing R0C114 1 Auto Door Bottom 4447 S NA

SET #COMH 24 - Always Locked

Doors: 201B, 219A, 221A, 251A, 254A

3 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Lockset F07 (45H-7D14N PATD) 630AM 1 Door Closer C72011 PT4C/D/F/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Wall Bumper LO2251 626 1 Gasketing R0C114

SET #COMH 25 - Card Reader Egress

Doors: 252A

1 Continuous Hinge A31011G 628 1 Exit Device TYPE 3 FUNC. 1 X ALK 630AM 1 Mortise Cylinder 1E-74 PATD 626 BE 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE 689 1 Gasketing R0C114 1 Auto Door Bottom 4447 S NA 1 Door Contact MSS SERIES MA

SET #COMH 26 – NOT USED

SET #COMH 27 – Exterior, Monitored

Doors: 110B

1 Continuous Hinge A31011G 628 1 Exit Device TYPE 3 FUNC. 8 X ELR DS CD DS TS 630AM 1 Mortise Cylinder 1E-74 PATD 626 BE 1 Card Reader BY SECURITY 1 Power Supply ELR151 600 PR 1 Termina Interface Enclosure TIE1000 600 IAS 1 Door Closer C72061 PT4C/D/F/H X 1.5” BORE 689

1 Kick Plate J103 8" 630

1 Door Sweep R3A436 A 1 Weatherstrip 700 ES NA 1 Rain Drip 16A 1 Door Contact MSS SERIES MA

SET #COMH 28 – Overhead, Monitored

Doors: 106B, 112C

1 Padlock 41B-722T PATD M1 606 BE 1 Mortise Cylinder 1E-74 PATD 626 BE 1 Door Contact MSS SERIES

Note: Cylinder for key switch. Padlock for track.

SET #COMH 29 - Monitored

Doors: 101A, 107A, 108A, 113A

1 Continuous Hinge A31011G 628 1 Exit Device TYPE 3 FUNC. 8 X FL DS 630AM 1 Mortise Cylinder 1E-74 PATD 626 BE 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Gasketing R0C114 1 Auto Door Bottom R1U323 1 Door Contact MSS SERIES MA

SET #COMH 30 - Card Reader Entry, Free Egress

Doors: 103B

1 Continuous Hinge A31011G 628 1 Electro-mech Lock 45HW-7DEU14N PATD DS LS 630AM BE 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Terminal Interface Enclosure TIE1000 IAS 1 Power Transfer PT1000 689 AB 1 Card Reader BY SECURITY 1 Gasketing R0C114 1 Auto Door Bottom 4447 S NA 1 Door Contact MSS SERIES MA

SET #COMH 31 - Monitored

Doors: 106A, 3 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Lockset F05 (45H-7R14N PATD) 630AM 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE DA 689 1 Kick Plate J103 8" 630 1 Gasketing R0C114 1 Door Contact MSS SERIES MA

SET #COMH 32 - Push Button Lockset, Monitored

Doors: 102A

2 Continuous Hinge A31011G 628 1 Set Auto Flush Bolts 4.4 TYPE 25 (3810) 630 1 Dustproof Strike LO4021 (3911) 630 1 Keypad Lock 45HZ-7DV14KP PATD 626AM BE 1 Coordinator 4.1.1 TYPE 21 X FILLER X BRACKETS 689 2 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE DA 689 2 Armor Plate J101 34" 630 2 Frame Guard FG8000-36 630 TR 1 Gasketing R0C114 2 Door Contact MSS SERIES MA

SET #COMH 33 – Card Reader Entry, Free Egress

Doors: 103A

2 Continuous Hinge A31011G 628 1 Power Transfer PT1000 689 AB 1 Set Auto Flush Bolts 4.4 TYPE 25 (3810) 630 1 Dustproof Strike LO4021 (3911) 630 1 Electro-mech Lock 45HW-7DEU14N PATD DS LS 630AM BE 1 Coordinator 4.1.1 TYPE 21 X FILLER X BRACKETS 689 2 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE DA 689 2 Armor Plate J101 34" 630 2 Frame Guard FG8000-36 630 TR

2 Door Contact MSS SERIES MA

SET #COMH 34 - Push Pull

Doors: 131A

2 Continuous Hinge A31011G 628 2 Dummy Bar N673DR X LEVER 630 PR 2 Door Closer C72061 PT4C/D/F/H X 1.5” BORE 689 2 Kick Plate J103 8" 630 1 Gasketing R0C114 1 Astragal R3E720 2 Auto Door Bottom R1U323

SET #COMH 35 - Push Button Lockset, Monitored

Doors: 109A, 110A

1 Continuous Hinge A31011G 628 1 Keypad Lock 45HZ-7DV14KP PATD 626AM BE 1 Door Closer C72051 PT4C/D/F/G/H X 1.5” BORE 689 1 Kick Plate J101 34" 630 1 Gasketing R0C114 1 Door Contact MSS SERIES @ 110A ONLY MA

SET #COMH 36 - Card Reader Entry, Free Egress

Doors: 236A, 237A, 238A, 239A, 240A, 241A, 242A, 243A, 244A, 246A, 1 Continuous Hinge A31011G 628 1 Electro-mech Lock 45HW-7DEU14N PATD DS LS RQE 630AM BE 1 Power Transfer PT1000 689 AB 1 Card Reader BY SECURITY 1 Wall Stop LO2251 1 Gasketing R0C114 1 Auto Door Bottom 4447 S NA 1 Door Contact MSS SERIES MA

SET #COMH 37 - Card Reader Entry, Free Egress

Doors: 247A

1 Continuous Hinge A31011G 628 1 Electro-mech Lock 45HW-7DEU14N PATD DS LS RQE 630AM BE 1 Power Transfer PT1000 689 AB 1 Card Reader BY SECURITY 1 Wall Stop LO2251

1 Auto Door Bottom 4447 S NA 1 Door Contact MSS SERIES MA

SET #COMH 38 - Monitored

Doors: 211A

3 Hinge A81112 CONC. BEARING 4.5 X4.5 652 1 Exit Device TYPE 3 FUNC. 8 X FL DS 630AM 1 Mortise Cylinder 1E-74 PATD 626 BE 1 Door Closer C72011 PT4C/D/F/H X 1.5” BORE 689 1 Wall Magnet 2100 RS 630 AB

SET #COMH 38 - Privacy

Doors: 248A, 249A

3 Hinges A81112 CONC. BEARING 4 1/2 x 4 1/2 652 1 Privacy Set F19 (45H-0L14N) 630AM 1 Door Closer C72051 PT4C/D/H X 1.5” BORE 689 1 Kick Plate J103 8" 630 1 Mop Plate J102 4" 630 1 Wall Bumper LO2251 626 1 Gasketing R0C114

SET #COMH 39 – Hangar Inset Door, Monitored

Doors: 100A.1, 100A.2, 100A.3, 100B.1, 100B.2, 100B.3

1 Continuous Hinge A31011G 628 1 Exit Device TYPE 3 FUNC. 3 CD DS X LDH1000 630AM 2 Mortise Cylinder 1E-74 PATD 626 BE 1 Flush Pull J403 6” (1111C) 630AM 1 Door Closer C72061 PT4C/D/F/H X 1.5” BORE 689 1 Full Perimeter Seal 700 ES NA 1 Door Contact MSS SERIES MA

SET #COMH 40 – Hangar Hopper Style Access Door, Monitored

Doors: 100A.1H, 100A.2H, 100A.3H, 100B.1H, 100B.2H, 100B.3H

1 Continuous Hinge A31011G 628 1 Deadbolt EO6081 (48H-7L) 626

1 Flush Pull J403 6” (1111C) 630AM 1 Full Perimeter Seal 700 ES NA