A-10.6 Versa Span - Flashings and Details Guide.pdf

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 - Fax: 503-581-6877 - www.taylormetal.com

Versa-Span™ Flashings and Details Guide

Taylor Metal Products - Phone: 503-581-8338 or 800-5741388 - Fax: 503-581-6877 - www.taylormetal.com

Versa-Span™

Features & Benefits

• 14-5/8" and 18" Standard Panel Width

• 1-3/4" Snap Lock Seam

• Custom Lengths 2'0" to 300'0"

• Concealed Clip System - No Seaming Required

• Minimum Slope 2 : 12

• UL 580 Class 90 Wind Uplift

• UL Certified for Cons No. 254, 255, 261, 303, 343, 414, 508A

• Structural Panel Suitable For Open Purlin System up to 4'

• Tested For:

ASTM 1592 - Structural Perforation ASTM 1646 ‐ Water Infiltration ASTM 1680 ‐ Air Infiltration

Available Options

• Flat Pan / Ribs / Striations *

• 12" - 24" Panel Widths

• Weather tightness Warranty (Contact Taylor Metal Representative for cost and requirements)

• Factory Injected Butyl Sealant

• On-site roll forming available (Contact Taylor Metal Representative)

*Striations reduce the appearance of oil canning

Material Specifications

• 24 gauge Kynar 500® Painted Steel

.0236" Steel (thickness prior to painting)

Per ASTM A-653-94 G-90 Galvanizing

• 24 gauge Zincalume .0236" Steel AZ55 - Clear Acrylic Coating Per ASTM A-792

Available Options

• 22 gauge Kynar 500 Painted Steel

.029" Steel (thickness prior to painting)

Per ASTM A-653-94 G-90 Galvanizing

• AZ50 Zincalume Per ASTM 792

• 16 and 20 ounce Copper Per ASTM B-370

Finishes

• Panel is available in a wide variety of “Cool” baked on Kynar colors.

See color chart or inquire for availability.

• Kynar® 500 Paint System - the ultimate in exterior durability and color retention

• Top of the line, two-coat, 70% resin finish, applied to a 1 mil. thickness

• 30-year paint warranty includes:

• fading

• chalking

• chipping

• cracking

• peeling

P A N E L P R O F IL E

STRUCTURAL SNAP-LOCK

Performance

20 year commercial paint warranty 30 year residential paint warranty fading chalking chipping cracking peeling

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

VS-1 EAVE DETAILVS-1 EAVE DETAILVS-1 EAVE DETAILVS-1 EAVE DETAIL

OFFSET CLEAT (VOC) TRIM CLEAT (VTC) EAVE (VES)

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

NOTES!TO!DESIGNER/INSTALLER……………………………………………………!pg.!435!

HANDLING/STORAGE!&!SAFETY……………………………………………………..pg.!6!

EAVE!DETAIL…………………………………………………………………………………..pg.!7!

HOOK!EAVE!WITH!GUTTER!DETAIL…………………………………………………!pg.!8!

STANDARD!RIDGE!DETAIL………………………………………………………………!pg.!9!

VENTED!RIDGE!DETAIL……………………………………………………………………pg.!10!

STANDARD!VALLEY!DETAIL…………………………………………………………….!pg.!11!

ALTERNATE!VALLEY!DETAIL……………………………………………………………!pg.!12!

STANDARD!GABLE!DETAIL………………………………………………………………pg.!13!

ALTERNATE!GABLE!DETAIL……………………………………………………………..pg.!14!

SIDE!WALL!DETAIL………………………………………………………………………….pg.!15!

RIDGE!END!CAP!DETAIL………………………………………………………………….!pg.!16!

VENTED!RIDGE!END!CAP!DETAIL…………………………………………………….pg.!17!

ROOF!PITCH!TRANSITION!DETAIL……………………………………………………pg.!18!

ROOF!HEAD!DETAIL………………………………………………………………………..pg.!19!

VENTED!ROOF!HEAD!DETAIL………………………………………………………….!pg.!20!

SAW!CUT!ROOF!HEAD!DETAIL………………………………………………………..!pg.!21!

BACK!PAN/CRICKET!ISO!DETAIL………………………………………………………pg.!22!

CURB!SIDE!WALL!DETAIL………………………………………………………………..!pg.!23!

CURB!HEAD!DETAIL………………………………………………………………………..pg.!24!

CURB!BACK!PAN……………………………………………………………………………..pg.!25!

PIPE!PENATRATION!DETAIL!1………………………………………………………….pg.!26!

PIPE!PENATRATION!DETAIL!2………………………………………………………….pg.!27!

PIPE!PENETRATION!MID!PANEL………………………………………………………pg.!28!

ROOF!END!DAM!ASSEMBLY……………………………………………………………!pg.!29!

FLASHING!SELECTION…………………………………………………………………….!pg.!30332!

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Notes to Designer/InstallerNotes to Designer/InstallerNotes to Designer/InstallerNotes to Designer/Installer Taylor Commercial ProductsTaylor Commercial ProductsTaylor Commercial ProductsTaylor Commercial Products is providing the following details as an aid in design. The details in this guide are not inclusive to all design situations. The designer/installer is responsible for modifications and should take into consideration all aspects of the project including climate conditions, such as, snow and wind, as well as, building code requirements, building design, building usage and maintenance requirements.

Installation should be performed only by qualified installers familiar with metal roofing systems and industry standards. For details not shown in this guide, refer to the Sheet Metal and Air Conditioning Contractors National Association (SMACNA) architectural sheet metal manual for proper design.

The Standard gauge for all products in this guide is 24 gauge and the standard finish is Kynar 500®/Hylar 5000®. We recommend specifying all flashings be the same gauge, color, and finish as the panels to insure long-term durability and color match.

SubstratesSubstratesSubstratesSubstrates Details in the manual are all shown over solid substrate. Versa-SpanVersa-SpanVersa-SpanVersa-Span™ can be used over spaced purlins.

For solid substrate, Taylor Commercial ProductsTaylor Commercial ProductsTaylor Commercial ProductsTaylor Commercial Products recommends 5/8” plywood or metal decking.

UnderlaymentsUnderlaymentsUnderlaymentsUnderlayments Minimum underlayment requirements are 30 lb. ASTM rated felt, a synthetic underlayment with Class A and ASTM UV protection technology or a high temperature self-adhering rubberized membrane. When choosing the underlayment, consider the roof slope, roof design, roof panel, and the climate.

All panels must be pinned at the top to resist the drag load caused by snow loads, live loads, and the weight of the panel. Drag load is a function of roof slope, actual load and length of panels. Contact Taylor Commercial ProductsTaylor Commercial ProductsTaylor Commercial ProductsTaylor Commercial Products for specific drag load requirements.

Drag Load RequirementsDrag Load RequirementsDrag Load RequirementsDrag Load Requirements

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Ventilation/InsulationVentilation/InsulationVentilation/InsulationVentilation/Insulation It is the responsibility of the designer to determine the material types needed to control condensation and to insulate and ventilate the roof system. Applications over rigid insulation may require blocking for solid attachment and framing the perimeter for installation of perimeter flashings.

Oil CanningOil CanningOil CanningOil Canning Flat metal surfaces will display waviness commonly referred to as “oil canning.” Oil canning is caused by a variety of conditions: Steel mill tolerances, variations in or uneven substrates and roofing underlayments. Oil canning is a characteristic of metal roofing, not a defect and is not a cause for rejection. Taylor Commercial Products Versa-Span™ with striations or accent ribs to help minimize oil canning.

Thermal MovementThermal MovementThermal MovementThermal Movement The Panels and the flashings must be allowed to expand and contract, especially with longer length panels. The panel may need to have a slight gap where the panel hooks the offset cleat to allow for thermal movement of the panels.

Snow DesignSnow DesignSnow DesignSnow Design The following details do not address all conditions for snow environments. Consult with the designers, engineers, and others for acceptable details to accommodate your project and climate conditions.

When possible, gutters, valleys, pitch changes or other penetrations should be minimized in snow areas.

All roof penetrations should be located as close to the ridge or top of roof. Snow country requires special designs for valleys to accommodate accumulation of snow and ice from uphill panels. Roof design should be considered in snow areas. Roof design should help resist the melting and freezing of snow and ice. A fit for purpose roof design has the greatest impact on maintaining a damage free roof system in snow areas. Please contact a Taylor Commercial Products representative for assistance in detail designs and appropriate panel selection for specific climate and building conditions.

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Handling / Storage & SafetyHandling / Storage & SafetyHandling / Storage & SafetyHandling / Storage & Safety Handle materials with care when off-loading or moving materials to avoid damage to panels or flashings. Long panels may require two or more pick-up points, properly spaced to avoid damaging panels. Plan ahead; contact Taylor Commercial Products for recommendations on handling/hoisting long panels.

Store the panels, flashings and accessories in a dry, well ventilated area, off the ground. If covering, allow ventilation around panels. Elevate one end of bundle to allow drainage of wet materials.

Wear clean, soft-soled shoes when walking on roofing panels to avoid damage to the painted finish.

Take care that sand, gravel, dirt, etc. sticking to your shoes is not carried onto the roof, scratching or otherwise damaging the finish on the roofing material. Walking on asphalt impregnated felt paper, especially on a hot day, can cause the asphalt to stick to your shoes and be tracked on to the roofing material.

Take care when painting to avoid getting over spray on the roofing material. Remember that wind can carry paint particles some distance. Over spray can cause the finish of the roofing material to look dull and may void your warranty.

Secure materials, especially when leaving the site, on the ground or roof to prevent winds from moving the materials. Wind-blown materials may cause damage to the material, property or persons.

Always use proper safety equipment and attire to minimize risk of cuts or other injuries.

Do not walk on panels that have not been completely installed.

Do not walk on major ribs of panels.

Metal roofs that are wet or dusty can be extremely slippery. Wear soft soled shoes and a safety harness to minimize risk of falling.

Avoid installing metal panels in windy conditions.

Safety considerations are the responsibility of the installer and his crew. Be sure to use common sensesensesensesense and generally accepted safety practices when installing roofing materials.

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashing and Details Guide

EAVE HOOK (VEH)

HOOK EAVE

EAVE HOOK (VEH)

EAVE STANDARD (VEH)

EAVE HOOK (VSEH)

EAVE STANDARD (VSES)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

OFFSET CLEAT (VOC) TRIM CLEAT (VTC) EAVE (VES)

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

HOOK EAVE WITH GUTTER

BOX GUTTER (VBG)BOX GUTTER (VSBG)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

RIDGE STANDARD (VRS)

STANDARD RIDGE

RIDGE (VSRS)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

VENTED RIDGE (VRFV)

VENTED RIDGE

VENTED RIDGE (VSRFV)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

OFFSET CLEAT (VOC)

VALLEY FLASHING (VVF)

STANDARD VALLEY

36˝

VALLEY FLASHING (VSVF)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

VALLEY FLASHING (VVF)

ALTERNATE VALLEY

36˝

VALLEY FLASHING (VSVF)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

STANDARD GABLE

STANDARD GABLE (VGS)

SUPPORT FLASHING (VSF)

STANDARD GABLE

STANDARD GABLE (VGS)SUPPORT FLASHING (VSF)

$$$$$$$$$$$$$$$$$NEOPRENE$WASHERED$SCREW$12˝$OC

SUPPORT FLASHING (VSGS1)

STANDARD$GABLE$(VGS)$ GABLE$SUPPORT$(VGC)$ ALT$GABLE$(VAGS)$

ALT$L$CLOSURE$(VAGL)$ BACK$PAN$(VPAN)$ CURB$HEAD$

CURB$SIDE$ END$DAM$ PERF$

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashing and Details Guide

Varies per panel

CURB SIDEWALL (VCS)

CURB HEAD (VCD)

STANDARD'GABLE'(VSGS1) GABLE'SUPPORT'(VSGSF) ALT'GABLE'(VSGS2)

ALT'L'CLOSURE'(VSLF) BACK'PAN'(VSPAN) CURB'HEAD'(VSCH)

CURB'SIDEWALL'(VSSWC) END'DAM'(VSED) PERF'(VSPF)

Color Color

Color

Color Color

Color

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

OFFSET CLEAT (VOC) TRIM CLEAT (VTC) EAVE (VES)

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

VS-1 EAVE DETAILVS-1 EAVE DETAILVS-1 EAVE DETAILVS-1 EAVE DETAIL

OFFSET CLEAT (VOC) TRIM CLEAT (VTC) EAVE (VES)

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

ALTERNATE GABLE

SUPPORT FLASHING (VSF) ALT GABLE (VAGS)ALT L CLOSURE (VAGL)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

MS200™

Flashing and Details Guide

ALT GABLE (VSGS2)ALT CLOSURE (VSLF)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

OFFSET CLEAT (VOC) TRIM CLEAT (VTC) EAVE (VES)

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

SIDE WALL (VSW)SUPPORT FLASHING (VSF)

SIDE WALL

SIDE WALL (VSSW)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

RIDGE END CAP (VREC)

RIDGE END CAP

RIDGE END CAP (VREC)

RIDGE END CAP (VSREC)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

OFFSET CLEAT (VOC) TRIM CLEAT (VTC) EAVE (VES)

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

VENTED RIDGE END CAP (VVREC)

VENTED RIDGE END CAP

VENTED ENDWALL (VEWV)VENTED RIDGE END (VSRECV)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

ENDWALL (VEW)

ROOF PITCH TRANSITION

ENDWALL (VEW)ENDWALL (VSEW)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

END WALL

ENDWALL (VEW)

ENDWALL (VSEW)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

! 20

VENTED END WALL

VENTED ENDWALL (VEWV)VENTED ENDWALL (VSWV)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

! 21

ENDWALL (VEW)

SAW CUT ROOF HEAD

ENDWALL (VEW)

REGLET (VRF)

ENDWALL (VSRF)

REGLET (VSRF)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

OFFSET CLEAT (VOC) TRIM CLEAT (VTC) EAVE (VES)

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

PAN FLASHING (VPAN)

BACK PAN

PAN FLASHING (VPAN)

BACK PAN (VSPAN)

TAB SIDE WALL TO RECEIVE BACK PAN

TAB SIDE WALL TO RECEIVE BACK PAN

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

! 23

CURB SIDEWALL (VCS)

CURB SIDE WALL

CURB SIDEWALL (VCS)

!!TURN!SIDE!OF!PANEL!UP

CURB SIDEWALL (VSSWC)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

OFFSET CLEAT (VOC) TRIM CLEAT (VTC) EAVE (VES)

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

CURB HEAD (VCD)

CURB HEAD

CURB HEAD (VSCH)

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

CURB PAN/CRICKET

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

PIPE PENETRATION

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Flashing and Details Guide

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

OFFSET CLEAT (VOC) TRIM CLEAT (VTC) EAVE (VES)

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

OFFSET CLEAT (VOC) TRIM CLEAT (VTC) EAVE (VES)

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashings and Details GuideFlashings and Details Guide

NOTES!TO!DESIGNER/INSTALLER……………………………………………………!pg.!233!

HANDLING/STORAGE!&!SAFETY……………………………………………………..pg.!4!

EAVE!DETAIL…………………………………………………………………………………..pg.!5!

HOOK!EAVE!WITH!GUTTER!DETAIL…………………………………………………!pg.!6!

STANDARD!RIDGE!DETAIL………………………………………………………………!pg.!7!

HOOK!RIDGE!DETAIL………………………………………………………………………!pg.!8!

VENTED!RIDGE!DETAIL……………………………………………………………………pg.!9!

STANDARD!VALLEY!DETAIL…………………………………………………………….!pg.!10!

ALTERNATE!VALLEY!DETAIL……………………………………………………………!pg.!11!

STANDARD!GABLE!DETAIL………………………………………………………………pg.!12!

ALTERNATE!GABLE!DETAIL……………………………………………………………..pg.!13!

RADIUS!GABLE!DETAIL……………………………………………………………………!pg.!14!

SIDE!WALL!DETAIL………………………………………………………………………….pg.!15!

RIDGE!END!CAP!DETAIL………………………………………………………………….!pg.!16!

VENTED!RIDGE!END!CAP!DETAIL…………………………………………………….pg.!17!

ROOF!PITCH!TRANSITION!DETAIL……………………………………………………pg.!18!

ROOF!HEAD!DETAIL………………………………………………………………………..pg.!19!

VENTED!ROOF!HEAD!DETAIL………………………………………………………….!pg.!20!

SAW!CUT!ROOF!HEAD!DETAIL………………………………………………………..!pg.!21!

BACK!PAN/CRICKET!ISO!DETAIL………………………………………………………pg.!22!

CURB!SIDE!WALL!DETAIL………………………………………………………………..!pg.!23!

CURB!HEAD!DETAIL………………………………………………………………………..pg.!24!

PIPE!PENATRATION!DETAIL!1………………………………………………………….pg.!25!

PIPE!PENATRATION!DETAIL!2………………………………………………………….pg.!26!

ROOF!END!DAM!ASSEMBLY……………………………………………………………!pg.!27!

FLASHING!SELECTION…………………………………………………………………….!pg.!28331!

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashing and Details Guide

! 2829

END DAM

EAVE$STANDARD$(VES)$ EAVE$HOOK$(VEH)$ OFFSET$CLEAT$(VOC)$

BOX$GUTTER$(VBG)$ SUPPORT$FLASHING$(VSF)$ $$$$$$$$$$SIDE$WALL$$(VRS)$

EAVE$STANDARD$(VES)$ EAVE$HOOK$(VEH)$ SUPPORT$CLEAT$(VOC)$

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashing and Details Guide

(VSW)

RIDGE END CAP(VREC)

VENTED RIDGE END CAP (VVREC)VENTED RIDGE END CAP (VVREC)VENTED RIDGE END CAP (VVREC)

VENTED RIDGE END(VVREC)

EAVE$STANDARD$(VES)$ EAVE$HOOK$(VEH)$ OFFSET$CLEAT$(VOC)$

BOX$GUTTER$(VBG)$ SUPPORT$FLASHING$(VSF)$ $$$$$$$$$$SIDE$WALL$$(VRS)$

EAVE$STANDARD$(VES)$ EAVE$HOOK$(VEH)$ SUPPORT$CLEAT$(VOC)$

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashing and Details Guide

(VSW)

RIDGE END CAP(VREC)

VENTED RIDGE END CAP (VVREC)VENTED RIDGE END CAP (VVREC)VENTED RIDGE END CAP (VVREC)

VENTED RIDGE END(VVREC)

EAVE$STANDARD$(VES)$ EAVE$HOOK$(VEH)$ OFFSET$CLEAT$(VOC)$

BOX$GUTTER$(VBG)$ SUPPORT$FLASHING$(VSF)$ $$$$$$$$$$SIDE$WALL$$(VRS)$

EAVE$STANDARD$(VES)$ EAVE$HOOK$(VEH)$ SUPPORT$CLEAT$(VOC)$

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashing and Details Guide

(VSW)

RIDGE END CAP(VREC)

VENTED RIDGE END CAP (VVREC)VENTED RIDGE END CAP (VVREC)VENTED RIDGE END CAP (VVREC)

VENTED RIDGE END(VVREC)

EAVE$STANDARD$(VSES) EAVE$HOOK$(VSEH) OFFSET$CLEAT$(VSOC)

BOX$GUTTER$(VSBG) SUPPORT$FLASHING$(VSSF) SIDE$WALL$(VSSW)

RIDGE$END$CAP$(VSREC) VENTED$RIDGE$END(VSRECV) SUPPORT$CLEAT$(VSSC)

RIDGE$(VRS)$ ENDWALL$(VEW)$

VALLEY$FLASHING$(VVF)$ $$$$$$$$$$REGLET$(VRF)$

VENTED$RIDGE$(VRFV)$ ZEE$CLOSURE$(VZC)$

VENTED$ENDWALL$(VEWV)$

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashing and Details Guide

303131

RIDGE&(VSRS) ENDWALL&(VSEW)

VALLEY&FLASHING&(VSVF) REGLET&&(VSRF)VENTED&ENDWALL&(VSWV)

VENTED&RIDGE&(VSRFV) ZEE&CLOSURE&(VSZF)

Color Color

Color

RIDGE$(VRS)$ ENDWALL$(VEW)$

VALLEY$FLASHING$(VVF)$ $$$$$$$$$$REGLET$(VRF)$

VENTED$RIDGE$(VRFV)$ ZEE$CLOSURE$(VZC)$

VENTED$ENDWALL$(VEWV)$

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashing and Details Guide

303131

Color Color

Color

Color

Color

Roof'Pitch

Roof'Pitch

Roof'Pitch

Roof'Pitch

Roof'Pitch

STANDARD$GABLE$(VGS)$ GABLE$SUPPORT$(VGC)$ ALT$GABLE$(VAGS)$

ALT$L$CLOSURE$(VAGL)$ BACK$PAN$(VPAN)$ CURB$HEAD$

CURB$SIDE$ END$DAM$ PERF$

Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 ~ Fax: 503-581-6877 ~ www.taylormetal.com

Versa-SpanVersa-SpanVersa-SpanVersa-Span ™™™ Flashing and Details Guide

Varies per panel

CURB SIDEWALL (VCS)

CURB HEAD (VCD)

STANDARD'GABLE'(VSGS1) GABLE'SUPPORT'(VSGSF) ALT'GABLE'(VSGS2)

ALT'L'CLOSURE'(VSLF) BACK'PAN'(VSPAN) CURB'HEAD'(VSCH)

CURB'SIDEWALL'(VSSWC) END'DAM'(VSED) PERF'(VSPF)

Color Color

Color

Color Color