8-Koosharem Manning Allotment Contract Map 2026 topo..pdf

This is a topographical contract map prepared by the State of Utah Division of Wildlife Resources for the Monroe Mountain Koosharem/Manning Allotment Fence installation project. The map depicts the project boundaries for two separate allotments—the Koosharem Allotment and the Manning Allotment—located in Sevier and Piute Counties at elevations between 9,434 and 10,130 feet. The document provides a visual reference for the approximately 6.70 miles (35,425 linear feet) of four-strand barbed wire rangeland fencing to be installed across both allotments. The map identifies the locations of 12-foot metal gates and 12-foot wire gates that will be integrated into the fence line, along with the precise allotment boundaries that define the project scope. A mandatory site visit is scheduled for July 22, 2026, at 10:30 a.m. at the Koosharem Mercantile Store (5 N Main Street, Koosharem, Utah 84744), with bids due on July 29, 2026. The performance window for contract execution runs from August 1, 2026, through June 30, 2027.

The bidding is structured on a per-linear-foot price basis with no fuel surcharges permitted, and the contract will be awarded to the lowest responsive and responsible bidder. Vendors must demonstrate a minimum of two years of rangeland fencing experience and provide three professional references. All equipment, materials, and supplies must be furnished by the contractor, including post-hole diggers, wire stretchers, chainsaws, tractors, and vehicles suitable for mountainous terrain. Contractors are required to obtain commercial general liability insurance with minimum coverage of $1,000,000 per occurrence and $3,000,000 aggregate, as well as commercial automobile liability insurance of $1 million combined single limit if vehicles are used. Work must commence within seven calendar days of receiving notice to proceed, and vendors must guarantee pricing for the entire contract term. Payment will be rendered as a lump-sum final payment following satisfactory inspection and completion.