8. SOW_Quickset Gimbal_Rev 1_9 Oct 2025.pdf
PDF 265 KB Posted
- Attached to
- Quickset Gimbal
- Solicitation number
- FA860126Q0001
About this file
This Statement of Work (SOW) is for a Quickset Gimbal system to be purchased by the Air Force Institute of Technology (AFIT). The gimbal is intended to support research and classroom projects involving hyperspectral, multispectral, and high-speed remote sensing instruments, with specific requirements including a 1200 lbs minimum payload capacity, ±200° pan range, 180° tilt range, and IP67 environmental rating. The system must support multiple physics and optical engineering courses and have advanced stabilization and communication capabilities.
The vendor must deliver the gimbal within 6 weeks of contract award to AFIT at Wright-Patterson AFB, Ohio, with full responsibility for transportation and on-site setup. Payment terms include 100% payment upon completion of requirements on a net 30 basis through Wide Area Work Flow, and the product will carry a two-year warranty against defects in material and workmanship. The gimbal's technical specifications include precise motion control, with pan and tilt speeds ranging from 0.001° to 20°/second and 0.001° to 4°/second respectively, and must be mountable on a tripod with communication interfaces including RS232/422/485 and Ethernet.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Q and A_ 1 signed.pdf | ||
| 8. SOW_Quickset Gimbal_Rev 1_15_December 2025.docx | DOCX document | |
| Solicitation - FA860126Q0001.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
Quickset Gimbal
09 October 2025
1.0. BACKGROUND: AFIT owns over $9M in exquisite hyperspectral, multispectral, and high speed remote sensing instruments used for both classroom projects and student research.
Many of these instrument have very strict requirements for motion stability in order to collect the highest quality data. This gimbal system is designed to provide that stability as well as high precision pointing control. This system directly supports over a dozen courses in both Optical Engineering and the Applied physics program by providing a mechanism to explore the practical application of skills learned in these programs. The system also provides a unique capability to support teaching activities in a variety of AFIT's Physics and Optical engineering classes including, PHYS-542, OENG-780, OENG-651, OENG-650, OENG-533, OENG-530, OENG-647, OENG 616L, PHY521, METG-644, PHYS-799, and
PHYS-999.PHYS-542, OENG-780, OENG-651, OENG-650, OENG-533, OENG-530,
OENG-647, OENG 616L, PHY521, METG-644, PHYS-799, and PHYS-999.
2.0. SCOPE: To purchase a Quickset Gimbal system
3.0. REQUIREMENTS:
1. Minimum Payload Capacity of 1200 Lbs.
2. Maximum Weight (Without Payload): 250 Lbs
3. Maximum Dimensions 24" W x 20" H x 15" D
4. Minimum Pan Range of Motion of ± 200°
5. Pan Speed control range from 0.001° to 20°/Second
6. Minimum Pan & Tilt Repeatability 0.05°
7. Tilt Payload Torque of 500 ft-lbs.
8. Tilt Range of Motion minimum of 180°
9. Tilt Speed control range 0.001° to 4°/Second
10. Active Stabilization for disturbances of 0.25Hz
11. Environmental Conditions must be IP67 Rated and have operating temperature range of
-30°C to +55°C
12. Communications interface via RS232/422/485 & Ethernet 10/100 Base-T and must support Quickset PTZ Protocol.
13. Must be able to be mounted on tripod.
4.0. Period of Performance: The vendor shall deliver and complete all requirements of this Statement of Work no later than 6 weeks after contract award.
1. Contractor shall be responsible for transportation of all new products, loading, unloading, storage and all necessary movement from factory to final onsite set up.
2. The contractor Project Manager shall be responsible for on-site coordination of all deliveries of their product, to include access to and operation of any equipment needed for unloading and movement of materials or product necessary to complete all requirements of this Statement of Work.
3. Warranty: Free from defects in material and workmanship, under normal and proper use in accordance with equipment user manual, for the period of time of two year after receipt.
4.1. Place of Performance:
Air Force Institute of Technology (AFIT/EN) ATTN: Dr. Michael Dexter 2950 Hobson Way Wright-Patterson AFB, OH 45433-7765
4.2 Payment: 100% payment upon completion of all requirements specified in this Statement of Work. Payment shall be made on a net 30 basis. Invoices shall be submitted and paid through Wide Area Work Flow (https://wawf.eb.mil/).
File details come from the government source that posted it. Updated .