Amendment 1 Attachment 3 Site Light cutsheet.pdf

PFAS_PowerForm_area 10/21 page 1 of 7

Gardco PowerForm LED area luminaires provide up to 1,000W HID replacement while significantly reducing energy and maintenance costs. PowerForm features an architecturally styled, modular housing design available in five different sizes for a range of commercial, retail, industrial, and other large area outdoor applications. PowerForm is available with multiple lumen packages delivering approximately 33,400 to 109,200 lumens.

Site & Area

PowerForm

PFAS

Project:

Location:

Cat.No:

Type:

Lamps: Qty:

Notes:

Ordering guide example: PFAS-184L-1A-NW-G2-AR-5W-120-PCB-120-BZ

Prefix

PFAS

Number of LEDs Drive Current Color Temperature Mounting Distribution Voltage

PFAS PowerForm Area Site 92L 92 LEDs (2 modules)

900 900mA 1A 1 Amp

WW-G2 Warm White

3000K, 70 CRI

Generation 2

NW-G2 Neutral White

4000K, 70 CRI

Generation 2

AR Arm Mount SF1 Slip Fitter Mount

(fits to 2-3⁄8" O.D. tenon)

2 Type 2 3 Type 3 4 Type 4 5W Type 5W AFR Auto Front Row AFR-90 Auto Front Row, Rotated 90° AFR-270 Auto Front Row, Rotated 270°

120 120V 208 208V 240 240V 277 277V 347 347V 480 480V

UNV 120-277V

HVU 347-480V

138L 138 LEDs (3 modules)

700 700mA 900 900mA 1A 1 Amp

184L 184 LEDs (4 modules)

900 900mA 1A 1 Amp

230L 230 LEDs (5 modules)

900 900mA 1A 1 Amp

276L 276 LEDs (6 modules)

900 900mA

1. Dual Circuit Control (DCC), Terminal Block (TB) and Square Pole Adaptor (SPA) options not available with Slip Fitter Mount (SF).

2. Product comes equipped with dimming drivers as standard. Only include DD if dimming leads need to be accessed external to the product.

3. Not available with other dimming control options.

4. Not available with motion sensor.

5. IMRI3/7 option not available with 230L-1A or 276L-900 due to wattage restriction. Not available with DD, DCC, and FAWS dimming control options.

6. Must specify a motion sensing lens.

7. Available in 120-277 (UNV) only.

8. Must specify specific input voltage.

9. Max. aiming angle 45°. Works with 3 pin NEMA photocell.

10. Dimming pins will not work if ordered with DD, FAWS, BL, or CS/CM50.

11. Not available in 480V or HVU.

12. Uses a 5-pin receptacle. Dimming pins will not work if ordered with DD, FAWS, BL, or CS/CM50.

13. Not available with Dual Circuit Control (DCC).

14. HIS option not available with 5W, AFR-90 and AFR-270

(see AFRES accessory).

Options

FinishDiming Controls Motion sensing lens Photo-sensing Electrical Luminaire

None2 leave blank DD2,3 0-10V external dimming

(controls by others) DCC1,3 Dual Circuit Control FAWS3,4 Field Adjustable

Wattage Selector BL3,5,6 Bi-level functionality

DynaDimmer: Automatic Profile Dimming CS503,7 Safety 50% Dimming, 7 hours CM503,7 Median 50% Dimming, 8 hours

IMRI35 Integral with #3 lens (up to 20' MH)

IMRI75 Integral with #7 lens (up to 40' MH)

PCB8,13,13 Photocontrol Button

TLRD59,10,13 Twist Lock Receptacle 5-pin

TLRD79,10,13 Twist Lock Receptacle 7-pin

TLRPC9,11,12,13 Twist Lock 5-pin Receptacle with 3-pin photocell

TB1 Terminal Block Fusing F18 Single

(120, 277, 347VAC)

F28 Double

(208, 240, 480VAC)

F38 Canadian Double

Pull (208, 240, 480VAC)

Pole Mount Fusing

FP18 Single

(120, 277, 347VAC)

FP28 Double

(208, 240, 480VAC)

FP38 Canadian Double Pull (208, 240, 480VAC)

Surge Protection (10kA standard)

SP2 Increased 20kA

SPA1 Square Pole Adapter

HIS14 Internal Housing Side Shield

Side Rails blank standard anodized, no finish

PSR Painted Side Rails, painted same finish to match luminaire finish

BK Black WH White BZ Bronze DGY Dark Gray MGY Medium Gray

RAL Optional Color (specify optional color or RAL)

CC Custom Color (must supply color chip, requires factory quote)

Josh Typewriter

PFAS138L700NWG2AR5W277DDBK

PFAS138L700NWG2AR3277DDBK

Josh Highlight

Josh Highlight

Josh Highlight

Josh Highlight

Josh Highlight

Josh Highlight

Josh Highlight

Josh Highlight

Josh Highlight

Josh Highlight

Josh Highlight

PFAS_PowerForm_area 10/21 page 2 of 7

LED Wattage and Lumen Values - 3000K

LED Wattage and Lumen Values - 4000K

PowerForm Accessories 1,3 (ordered separately, field installed)

Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown.

Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement considerations. It is highly recommended to confirm performance with a photometric layout.

NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires.

Shielding Accessories

Internal house side shield HIS-PFAS-92 92 LEDs (2 modules) HIS-PFAS-138 138 LEDs (3 modules) HIS-PFAS-184 184 LEDs (4 modules) HIS-PFAS-230 230 LEDs (5 modules) HIS-PFAS-276 276 LEDs (6 modules)

Photocell accessories P400S Shorting cap P400E Photocontrol 480V

External shield auto front row 90° or 270° 2 AFRES-PFAS-92 92 LEDs (2 modules) AFRES-PFAS-138 138 LEDs (3 modules) AFRES-PFAS-184 184 LEDs (4 modules) AFRES-PFAS-230 230 LEDs (5 modules) AFRES-PFAS-276 276 LEDs (6 modules)

1. Accessories must be ordered separately; requires field installation.

For additional information, see accessories information on following pages.

2. AFRES for use only with AFR-90 and AFR-270 (use HIS for AFR non-rotated optics).

3. Consult Signify to confirm whether specific accessories are BAA-compliant.

Ordering Code Total LEDs

System Current

(mA) Color Temp.

Average System Watts

Type 2 Type 3 Type 4 Type 5W Type AFR

Lumen Output

BUG

Rating

Efficacy

(LPW)

Lumen Output

BUG

Rating

Efficacy

(LPW)

Lumen Output

BUG

Rating

Efficacy

(LPW)

Lumen Output

BUG

Rating

Efficacy

(LPW)

Lumen Output

BUG

Rating

Efficacy

(LPW)

PFAS-92L-900-WW-G2-x 92 900 3000 264 34659 131 B3-U0-G4 32968 125 B3-U0-G4 31768 120 B3-U0-G4 33841 128 B5-U0-G4 34659 131 B3-U0-G4

PFAS-92L-1A-WW-G2-x 92 1050 3000 300 39303 131 B4-U0-G4 37681 126 B3-U0-G5 36027 120 B3-U0-G5 38376 128 B5-U0-G4 39303 131 B4-U0-G4

PFAS-138L-700-WW-G2-x 138 700 3000 295 43060 146 B4-U0-G4 40959 139 B3-U0-G5 39469 134 B4-U0-G5 42043 143 B5-U0-G4 43060 146 B4-U0-G4

PFAS-138L-900-WW-G2-x 138 900 3000 397 51987 131 B4-U0-G5 49452 125 B4-U0-G5 47652 120 B4-U0-G5 50761 128 B5-U0-G5 51987 131 B4-U0-G5

PFAS-138L-1A-WW-G2-x 138 1050 3000 452 58955 130 B4-U0-G5 56079 124 B4-U0-G5 54039 120 B4-U0-G5 57564 127 B5-U0-G5 58955 130 B4-U0-G5

PFAS-184L-900-WW-G2-x 184 900 3000 528 69316 131 B5-U0-G5 65936 125 B4-U0-G5 63536 120 B4-U0-G5 67681 128 B5-U0-G5 69316 131 B5-U0-G5

PFAS-184L-1A-WW-G2-x 184 1050 3000 600 78607 131 B5-U0-G5 74773 125 B5-U0-G5 72053 120 B4-U0-G5 76752 128 B5-U0-G5 78607 131 B5-U0-G5

PFAS-230L-900-WW-G2-x 230 900 3000 662 86645 131 B5-U0-G5 82419 124 B5-U0-G5 79421 120 B5-U0-G5 84600 128 B5-U0-G5 86645 131 B5-U0-G5

PFAS-230L-1A-WW-G2-x 230 1050 3000 754 98259 130 B5-U0-G5 93465 124 B5-U0-G5 90066 119 B5-U0-G5 95940 127 B5-U0-G5 98259 130 B5-U0-G5

PFAS-276L-900-WW-G2-x 276 900 3000 795 103975 131 B5-U0-G5 98903 124 B5-U0-G5 95305 120 B5-U0-G5 101521 128 B5-U0-G5 103975 131 B5-U0-G5

Ordering Code Total LEDs

System Current

(mA) Color Temp.

Average System Watts

Type 2 Type 3 Type 4 Type 5W Type AFR

Lumen Output

BUG

Rating

Efficacy

(LPW)

Lumen Output

BUG

Rating

Efficacy

(LPW)

Lumen Output

BUG

Rating

Efficacy

(LPW)

Lumen Output

BUG

Rating

Efficacy

(LPW)

Lumen Output

BUG

Rating

Efficacy

(LPW)

PFAS-92L-900-NW-G2-x 92 900 4000 264 36406 138 B4-U0-G4 34630 131 B3-U0-G4 33370 126 B3-U0-G5 35547 135 B5-U0-G4 36406 138 B4-U0-G4

PFAS-92L-1A-NW-G2-x 92 1050 4000 300 41285 138 B4-U0-G4 39581 132 B3-U0-G5 37843 126 B3-U0-G5 40311 134 B5-U0-G4 41285 138 B4-U0-G4

PFAS-138L-700-NW-G2-x 138 700 4000 295 45231 153 B4-U0-G4 43024 146 B4-U0-G5 41459 141 B4-U0-G5 44163 150 B5-U0-G5 45231 153 B4-U0-G4

PFAS-138L-900-NW-G2-x 138 900 4000 397 54608 138 B4-U0-G5 51945 131 B4-U0-G5 50055 126 B4-U0-G5 53320 134 B5-U0-G5 54608 138 B4-U0-G5

PFAS-138L-1A-NW-G2-x 138 1050 4000 452 61928 137 B5-U0-G5 58907 130 B4-U0-G5 56764 126 B4-U0-G5 60466 134 B5-U0-G5 61928 137 B5-U0-G5

PFAS-184L-900-NW-G2-x 184 900 4000 528 72811 138 B5-U0-G5 69260 131 B4-U0-G5 66740 126 B4-U0-G5 71093 135 B5-U0-G5 72811 138 B5-U0-G5

PFAS-184L-1A-NW-G2-x 184 1050 4000 600 82570 138 B5-U0-G5 78543 131 B5-U0-G5 75686 126 B4-U0-G5 80622 134 B5-U0-G5 82570 138 B5-U0-G5

PFAS-230L-900-NW-G2-x 230 900 4000 662 91014 137 B5-U0-G5 86575 131 B5-U0-G5 83425 126 B5-U0-G5 88866 134 B5-U0-G5 91014 137 B5-U0-G5

PFAS-230L-1A-NW-G2-x 230 1050 4000 754 103213 137 B5-U0-G5 98178 130 B5-U0-G5 94607 125 B5-U0-G5 100777 134 B5-U0-G5 103213 137 B5-U0-G5

PFAS-276L-900-NW-G2-x 276 900 4000 795 109217 137 B5-U0-G5 103890 131 B5-U0-G5 100110 126 B5-U0-G5 106640 134 B5-U0-G5 109217 137 B5-U0-G5

Mounting Accessories

PowerForm PTF2 (pole top fitter fits 2 3⁄8-2 1⁄2" OD x 4" depth tenon)

PTF2-PFAS-1-90-(F) 1 luminaire at 90° PTF2-PFAS-2-90-(F) 2 luminaires at 90° PTF2-PFAS-2-180-(F) 2 luminaires at 180° PTF2-PFAS-3-90-(F) 3 luminaires at 90° PTF2-PFAS-4-90-(F) 4 luminaires at 90° PTF2-PFAS-3-120-(F) 3 luminaires at 120°

PowerForm PTF3 (pole top fitter fits 3-3 1⁄2" OD x 6" depth tenon)

PTF3-PFAS-1-90-(F) 1 luminaire at 90° PTF3-PFAS-2-90-(F) 2 luminaires at 90° PTF3-PFAS-2-180-(F) 2 luminaires at 180° PTF3-PFAS-3-90-(F) 3 luminaires at 90° PTF3-PFAS-4-90-(F) 4 luminaires at 90° PTF3-PFAS-3-120-(F) 3 luminaires at 120°

PowerForm PTF4 (pole top fitter fits 3 1⁄2-4" OD x 6" depth tenon)

PTF4-PFAS-1-90-(F) 1 luminaire at 90° PTF4-PFAS-2-90-(F) 2 luminaires at 90° PTF4-PFAS-2-180-(F) 2 luminaires at 180° PTF4-PFAS-3-90-(F) 3 luminaires at 90° PTF4-PFAS-4-90-(F) 4 luminaires at 90° PTF4-PFAS-3-120-(F) 3 luminaires at 120°

PFAS PowerForm Site & Area

For use with Type 2, 3, 4, and AFR optics (not for use with AFR-90 or AFR-270 rotated optics). A set of internal shields can be ordered separately and is determined by total number of LED’s per luminaire.

One injection molded black polymer shield snap fits to each 46 LED module.

PFAS_PowerForm_area 10/21 page 3 of 7

Type 2

Type 5W

Type 4Type 3

Type AFR

Distributions

Drill Template

Drilling Detail ø.875

2x ø.410 ± .01 2.25 ± .03

3.84 ± .03

1.75 ± .03

25 1⁄8" (638mm)

10 1⁄4" (261mm)

29" (737mm)

10 1⁄4" (261mm)

33" (838mm)

10 1⁄4" (261mm)

37" (940mm)

10 1⁄4" (261mm)

23 1⁄2" (597mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

6 3⁄8" (160mm)

1 3⁄4" (44mm)

3" (76mm)

21 1⁄4" (539mm)

10 1⁄4" (261mm)

2 Module (92L) 3 Module (138L) 4 Module (184L) 5 Module (230L) 6 Module (276L)

23 1⁄2" (597mm)

Drill Template Arm Mount Details

PowerForm standard Arm features an elongated bolt mounting pattern with key slot feature to aid in ease of mounting. Designed to fit a large number of existing pole drillings.

PFAS PowerForm Site & Area

Predicted Lumen Depreciation Data Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology.

Actual experience may vary due to field application conditions.L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours

Ambient Temperature °C Driver mA Calculated L70 Hours L70 per TM-21 Lumen Maintenance % at 60,000 hrs

25°C up to 1050 mA >100,000 hours >60,000 hours >92%

PFAS_PowerForm_area 10/21 page 4 of 7

25 1⁄8" (638mm)

10 1⁄4" (261mm)

29" (737mm)

10 1⁄4" (261mm)

33" (838mm)

10 1⁄4" (261mm)

37" (940mm)

10 1⁄4" (261mm)

23 1⁄2" (597mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

6 3⁄8" (160mm)

1 3⁄4" (44mm)

3" (76mm)

21 1⁄4" (539mm)

10 1⁄4" (261mm)

2 Module (92L) 3 Module (138L) 4 Module (184L) 5 Module (230L) 6 Module (276L)

23 1⁄2" (597mm)

21 1⁄4" (539mm)

9 3⁄4" (248mm)

23 1⁄2" (597mm)

25 1⁄8" (638mm)

9 3⁄4" (248mm)

29" (737mm)

9 3⁄4" (248mm)

33" (838mm)

9 3⁄4" (248mm)

37" (940mm)

9 3⁄4" (248mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

6 3⁄8" (160mm)

1 3⁄4" (44mm)

3" (76mm)

2 Module (92L) 3 Module (138L) 4 Module (184L) 5 Module (230L) 6 Module (276L)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

25 1⁄8" (638mm)

10 1⁄4" (261mm)

29" (737mm)

10 1⁄4" (261mm)

33" (838mm)

10 1⁄4" (261mm)

37" (940mm)

10 1⁄4" (261mm)

23 1⁄2" (597mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

6 3⁄8" (160mm)

1 3⁄4" (44mm)

3" (76mm)

21 1⁄4" (539mm)

10 1⁄4" (261mm)

2 Module (92L) 3 Module (138L) 4 Module (184L) 5 Module (230L) 6 Module (276L)

23 1⁄2" (597mm)

21 1⁄4" (539mm)

9 3⁄4" (248mm)

23 1⁄2" (597mm)

25 1⁄8" (638mm)

9 3⁄4" (248mm)

29" (737mm)

9 3⁄4" (248mm)

33" (838mm)

9 3⁄4" (248mm)

37" (940mm)

9 3⁄4" (248mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

23 1⁄2" (597mm)

6 3⁄8" (160mm)

1 3⁄4" (44mm)

3" (76mm)

2 Module (92L) 3 Module (138L) 4 Module (184L) 5 Module (230L) 6 Module (276L)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

5 3⁄8" (137mm)

Dimensions – Standard Arm (AR)

Dimensions – Slip Fitter Mount (SF)

No . o f M od ul es

Effective Projected Area (EPA-ft2) 1

Weight of single luminaire

Single Twin @ 180 3 or 4 PFAS

2 0.560 1.120 1.457 48 lbs (21.8 kg)

3 0.647 1.294 1.631 59 lbs (26.8 kg)

4 0.739 1.478 1.816 68 lbs (30.8 kg)

5 0.836 1.672 2.009 78 lbs (35.4 kg)

6 0.938 1.876 2.214 86 lbs (39.0 kg)

1. Applies to values as shown for quantity of single, twin at 180, three or four luminaires; all with 0 deg aiming at horizontal.

2. Applies to single PFAS luminaire with (SF) slipfitter mount at following angles when mounted on a horizontal tenon. 0° is horizontal to ground when mounted on a horizontal tenon. 90° is vertical to ground when mounted on a horizontal tenon.

No . o f M od ul es

Effective Projected Area (EPA-ft2) 1

EPA table with Slipfitter mounted on horizontal tenon

Weight of single luminaire

Single Twin @ 180 3 or 4 0° Aim 45° Aim 90° Aim PFAS SF

2 0.560 1.120 1.457 0.560 1.913 2.706 58 lbs (26.3 kg)

3 0.647 1.294 1.631 0.647 2.311 3.269 68 lbs (30.8 kg)

4 0.739 1.478 1.816 0.739 2.681 3.792 78 lbs (35.4 kg)

5 0.836 1.672 2.009 0.836 3.021 4.273 88 lbs (39.9 kg)

6 0.938 1.876 2.214 0.938 3.337 4.720 98 lbs (44.5 kg)

PFAS PowerForm Site & Area

PFAS_PowerForm_area 10/21 page 5 of 7

Optical Orientation Information

Standard Optic Position

Luminaires ordered with asymmetric optical systems in the standard optic position will have the optical system oriented as shown below:

AFR Optic Rotated Right (270°) Optic Position

Luminaires ordered with AFR optical systems in the Optic Rotated Right (270°) optic position will have the optical system oriented as shown below (only AFR type optics are available with factory set rotatable optics.):

AFR -90 Optic Rotated Left (90°) Optic Position

Luminaires ordered with AFR optical systems in the Optic Rotated Left (90°) optic position will have the optical system oriented as shown below (only AFR type optics are available with factory set rotatable optics.):

Twin Luminaire Assemblies with AFR-90/AFR-270 Rotated Optical Systems

Twin luminaire assemblies installed with rotated AFR type optical systems are an excellent way to direct light toward the interior of the site (Street Side) without additional equipment. It is important, however, that care be exercised to insure that luminaires are installed in the proper location.

Street Side Street Side

House Side House Side

Curbline Curbline

Right side of pole

Left side of pole

0° 0°

270° 270° 90° 90°

Note: The hand hole will normally be located on the pole at the 0° point.

Note: The hand hole will normally be located on the pole at the 0° point.

Right side of pole

Left side of pole

Street Side

House Side

Curbline

Right side of pole

Left side of pole

0°

270° 90°

Note: The hand hole will normally be located on the pole at the 0° point.

Note: Luminaire location, in relation to the standard hand hole, will depend on the luminaire drilling configuration on the pole.

Luminaires with Optic Rotated Right (270°) are installed on the LEFT Side of Pole

Luminaires with Optic Rotated Left (90°) are installed on the RIGHT Side of Pole

Street Side

House Side

Curbline

0°

Right side of pole

Left side of pole

Luminaire with

AFR-270

Luminaire with

AFR-90

180°

PFAS PowerForm Site & Area

PFAS_PowerForm_area 10/21 page 6 of 7

Housing Main body castings made of a low copper die cast Aluminum alloy (A360) for a high resistance to corrosion, 0.100" (2.5mm) minimum thickness.

Main body extrusions made of corrosion resistant low copper extruded anodized aluminum alloy (Anodized 6063-T5). Driver/Electrical compartment designed for robust IP66 rated seal using one-piece silicone rubber gasket surrounding the entire perimeter of the electronics compartment. Door secured with four screws outside of gasket perimeter. Includes a lanyard to prevent accidental dropping if access is required.

Heat Sink Anodized 6063-T5 Aluminum for a high resistance to corrosion, designed to ensure high efficacy and superior cooling by natural vertical convection. Air flow pattern always close to LEDs and driver optimizing their efficiency and life. Product does not use any cooling device with moving parts (only passive cooling).

Vibration Resistance PowerForm meets the ANSI C136.31, American National Standard for Roadway Luminaire Vibration specifications for Bridge/overpass applications (Tested for 1.5G over 100,000 cycles by an independent lab).

Mounting Arm Mount: Integrated die cast aluminum arm (AR), constructed of low copper alloy (A360) with access door. Ships fully assembled, ready to install and features an elongated bolt mounting pattern with key slot feature to aid in ease of mounting. Designed to fit a large number of existing pole drillings.

Arm mounting radius is designed to fit onto 3.5"-6" nominal O.D. poles. (Note:

nominal pole sizes vary). Must order optional square pole adaptor (SPA) for mounting onto square poles.

Slipfitter: Optional slipfitter (SF), adjustable knuckle mount, available for applications requiring up tilt aiming and used for surface wall mount with accessory brackets. Also serves for mast arm mounting on a horizontal tenon.

Fits over 2 3/8" OD tenon.

Light Engine Composed of 4 main components: Heat Sink / LED Module / Optical System / Driver. Electrical components are RoHS compliant. IP66 sealed light engines.

LEDs tested by ISO 17025-2005 accredited lab in accordance with IESNA LM-80 guidelines extrapolations in accordance with IESNA TM-21. Metal core board ensures greater heat transfer and longer lifespan. Module is RoHS compliant.

Color temperatures: 3000K +/-125K, 4000K +/- 200K. Minimum CRI of 70. LED light engine is rated IP66 in accordance to Section 9 of IEC 60598-1.

Energey Saving Benefits System efficacy up to 153 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods.

Optical System The advanced LED optical systems provide IES Types 2, 3, 4 and 5W distributions. A dedicated automotive front row optic is also available. The AFR-90 and AFR-270 is specified and used as rotated (factory set only) when needed in specific applications. Composed of high performance UV stabilized optical grade polymer refractor lenses to achieve desired distribution optimized to get maximum spacing, target lumens and a superior lighting uniformity. System is rated IP66. Performance shall be tested per LM-63, LM-79 and TM-15 (IESNA) certifying its photometric performance. Dark sky compliant with 0% uplight and U0 per IESNA TM-15. Designed and tested to rating IK10 in accordance with European standard EN 62262 (equivalent of international standard IEC 62262 2002).

Control Options 0-10V dimming (DD): 0-10V dimming driver with leads supplied through back of luminaire (for secondary dimming controls by others).

Dual Circuit Control (DCC): Luminaire equipped with the ability to have two separate circuits controlling drivers and light engines independently. Permits separate switching of separate modules controlled by use of two sets of leads, one for each circuit. Not recommended to be used with other control options, motion response, or photocells. Available as an option with 2 through 6 modules. Not available with the Slip Fitter Mount (SF).

Automatic Profile Dimming (CS/CM): Standard dimming profiles provide flexibility towards energy savings goals while optimizing light levels during specific dark hours. Dimming profiles include two dimming settings including dim to 50% of the total lumen output. When used in combination with not programmed motion response it overrides the controller’s schedule when motion is detected. After 5 minutes with no motion, it will return to the automatic dimming profile schedule. Automatic dimming profile scheduled with the following settings:

• CS50: Security for 7 hours night duration (Ex., 11 PM - 6 AM)

• CM50: Median for 8 hours night duration (Ex., 10 PM - 6 AM)

All above profiles are calculated from mid point of the night. Dimming is set for 6 hours after the mid point and 1 or 2 hours before depending of the duration of dimming. Cannot be used with other dimming control options.

Field Adjustable Wattage Selector (FAWS): Luminaire equipped with the ability to manually adjust the wattage in the field to reduce total luminaire lumen output and light levels. Comes pre-set to the highest position at the lumen output selected. Use chart below to estimate reduction in lumen output desired. Cannot be used with other control options or motion response.

Motion Response Options Bi-Level Infrared Motion Response (BL-IMRI): Motion Response module is mounted integral to luminaire factory pre-programmed to 50% dimming when not ordered with other control options. BL-IMRI is set/operates inthe following fashion: The motion sensor is set to a constant 50%. When motion is detected by the PIR sensor, the luminaire returns to full power/light output.

Dimming on low is factory set to 50% with 5 minutes default in "full power" prior to dimming back to low. When no motion is detected for 5 minutes, the motion response system reduces the wattage by 50%, to 50% of the normal constant wattage reducing the light level. Other dimming settings can be provided if different dimming levels are required. Not available with 230L-1A or 276L-900 due to wattage restriction. This can also be done with FSIR-100 Wireless Remote Programming Tool (contact Technical Support for details).

Infrared Motion Response with Other Controls: When used in combination with other controls (Automatic Dimming Profile and SiteWise), motion response device will simply override controller’s schedule with the added benefits of a combined dimming profile and sensor detection. In this configuration, the motion response device cannot be re-programmed with FSIR-100 Wireless Remote Programming Tool. The profile can only be re-programmed via the controller.

Specifications

PFAS PowerForm Site & Area

FAWS

Position

Percent of Typical Lumen Output

92L 138L/184L 230L/276L

1 25% 10% 15%

2 45% 20% 35%

3 55% 30% 45%

4 65% 40% 60%

5 70% 45% 70%

6 80% 55% 85%

7 85% 60% 100%

8 90% 70% 100%

9 95% 80% 100%

10 100% 100% 100%

Note: Typical value accuracy +/- 5%

Infrared Motion Response Lenses (IMRI3/IMRI7): Infrared Motion Response Integral module is available with two different sensor lens types to accommodate various mounting heights and occupancy detection ranges.

Lens #3 (IMRI3) is designed for mounting heights up to 20’ with a 40’ diameter coverage area. Lens #7 is designed for higher mounting heights up to 40’with larger coverage areas up to 100’ diameter coverage area. See charts for approximate detection patterns:

Electrical Driver: High power factor of 90% min. Electronic driver, operating range 50/60 Hz. Auto adjusting universal voltage input from 120 to 277 VAC or 347 to 480 VAC rated for both application line to line or line to neutral, Class I, THD of 20% max. The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction.

Standard built in driver surge protection of 2.5kV (min).

Twist-Lock Receptacle (TLRD5/TLRD7/ TLRPC): Twist Lock Receptacle with 5 pins enabling dimming or with 7 pins with additional functionality (by others)can be used with a twistlock photoelectric cell or a shorting cap.

DimmingReceptacle Type B (5-pin) and Type D-24 (7-pin) in accordance to ANSI C136.41. Can be used with third-party control system. Receptacle located on top of luminaire housing. When specifying receptacle with twistlock photoelectric cell, voltage must be specified. When ordering Twist-lock receptacle (TLRD5 or TLRD7), photocell or shorting cap is not included.

Receptacle pins 4 and 5 are connected to dimming driver's dimming leads whenever no Dimming Controls are selected; if Dimming Controls are selected then receptacle pins 4 and 5 are capped off because driver's dimming leads are used with Dimming Controls. Pins 6 and 7 on TLRD7 are also not connected unless used with SR drivers. Contact factory for more details.

Button Photocontrol (PCB): Button style design for internal luminaires mounting applications. The photocontrol is constructed of a high impact UV stabilized polycarbonate housing. Rated voltage of 120V or 208-277V with a load rating of 1000 VA. The photocell will turn on with 1-4Fc of ambient light.

Surge protection (SP1/SP2): Surge protection device tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C62.41.2 Scenario I Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and NeutralGround, and in accordance with DOE MSSLC Model Specification for LED Roadway Luminaires Appendix D Electrical Immunity High test level 10kV/10kA. 20kV / 10kA surge protection device that provides extra protection beyond the SP1 10kV/10kA level.

Finish Five standard colors offered in textured black, white, bronze, dark gray and medium gray. RAL and custom color matching available. Color in accordance with the AAMA 2604 standard. Application of polyester powder coat paint (2.5 mil minimum). The thermosetting resins provides a discoloration resistant finish in accordance with the ASTM D2244 standard, as well as luster retention in keeping with the ASTM D523 standard and humidity proof in accordance with the ASTM D2247 standard.

Certifications and Compliance UL/cUL wet location listed to the UL 1598 standard, suitable for use in ambient temperatures from -40° to 40°C (-40° to 104°F). Most PowerForm configurations are qualified under Premium and Standard DesignLights Consortium® categories. Consult DLC Qualified Products list to confirm your specific luminaire selection is approved.

Limited Warranty 5-year limited warranty. See signify.com/warranties for details and restrictions. Visit our eCatalog or contact your local sales representative for more information.

Specifications continued

PFAS PowerForm Site & Area

IMRI3 Luminaire with #3 lens

IMRI7 Luminaire with #7 lens 30' 27'

20'

12'

6' 3'

3' 6'

12'

20'

27'

30'

0' 60'

0'

10'

20'

30'

40'

0'

20'

10'

10'

20'

40' 10'

20'

0'

15'

5'

0'

8' 0' 3'3' 7'7' 11' '42'1124'

30'

20'

10'

10'

20'

0'

10' 0' 10' 20'20'

0' 10'10' 20'20'

44 ft

27' 20' 12' 6' 3' 0 3' 6' 12' 20' 27' 30' 30' 20' 12' 6' 0 6' 12' 20' 30'

20' 18' 15' 12' 9' 6' 3' 0 3' 6' 9' 12' 15' 18' 20'

0'

27'

40' 50' 25' 0' 25' 50'

0'

50'

25'

25'

50'

100'

50' 40' 30' 20' 10' 0 10' 20' 30' 40' 50'

30' 27'

20'

12'

6' 3'

3' 6'

12'

20'

27'

30'

0' 60'

0'

10'

20'

30'

40'

0'

20'

10'

10'

20'

40' 10'

20'

0'

15'

5'

0'

8' 0' 3'3' 7'7' 11' '42'1124'

30'

20'

10'

10'

20'

0'

10' 0' 10' 20'20'

0' 10'10' 20'20'

44 ft

27' 20' 12' 6' 3' 0 3' 6' 12' 20' 27' 30' 30' 20' 12' 6' 0 6' 12' 20' 30'

20' 18' 15' 12' 9' 6' 3' 0 3' 6' 9' 12' 15' 18' 20'

0'

27'

40' 50' 25' 0' 25' 50'

0'

50'

25'

25'

50'

100'

50' 40' 30' 20' 10' 0 10' 20' 30' 40' 50'

Buy American Act of 1933 (BAA):

This product is manufactured in one of our US factories and, as of the date of this document, this product was considered a commercially available off-the-shelf (COTS) item meeting the requirements of the BAA. This BAA designation hereunder does not address (i) the applicability of, or availability of a waiver under, the Trade Agreements Act, or (ii) the “Buy America” domestic content requirements imposed on states, localities, and other non-federal entities as a condition of receiving funds administered by the Department of Transportation or other federal agencies. Prior to ordering, please visit www.signify.com/baa to view a current list of BAA-compliant products to confirm this product’s current compliance.

FILENAME HERE XX/2019PFAS_PowerForm_area 10/21 page 7 of 7

© 2021 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.

PFAS_PowerForm_area 10/21 page 7 of 5

Signify North America Corporation 400 Crossing Blvd, Suite 600 Bridgewater, NJ 08807 Telephone 855-486-2216

Signify Canada Ltd.

281 Hillmount Road, Markham, ON, Canada L6C 2S3 Telephone 800-668-9008

All trademarks are owned by Signify Holding or their respective owners.

www.gardcolighting.com http://www.signify.com/warranties