7388857 DrawingsAsOne SIGNED.pdf

PDF 3 MB Posted Aug 15, 2025

Attached to: Upgrade Lift Station, B4228
Solicitation number: N400857388857
Issued by: Department of the Navy Naval Facilities Engineering Command

About this file

Written by GovTribe AI · Aug 15, 2025

This is a set of design and engineering drawings for an upgrade of multiple lift stations at Marine Corps Air Station (MCAS) Cherry Point in North Carolina. The project involves replacing and upgrading five existing lift stations located at different buildings: 8 Tyler Drive, Building 4398, Building 4318, Building 4228, and Building 4638. The comprehensive project includes electrical, civil, and demolition work, with a focus on installing new simplex package grinder pump stations, replacing existing wet wells, control panels, and associated infrastructure while maintaining the existing SCADA/telemetry systems.

The drawings detail specific requirements for each lift station, including electrical specifications such as voltage, phase, and amperage, as well as elevation and installation details. The project requires removing existing lift station components, installing new pump stations with compatible control systems, routing new power and control conduits, and ensuring proper integration with existing infrastructure. The final design is dated 09-29-2023, with the work to be performed at the Naval Facilities Engineering Command Midatlantic project site, and the work order number is 7328490. The project emphasizes maintaining existing systems' functionality during the upgrade process, with careful attention to power feeds, control mechanisms, and site-specific conditions.

View the file

Other files

File	Type	Posted
Amendment 0002 7388857.pdf	PDF	Dec 3, 2025
Amendment 0001 7388857.pdf	PDF	Aug 28, 2025
7388857 SpecsAsOne SIGNED.pdf	PDF	Aug 15, 2025
7388857 RFP.pdf	PDF	Aug 15, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

T4820D

T4820L

T4820B

T4820F

4376PLT-12

4376PLT-45

4376PLT-8

4376PLT-17

4376PLT-18

4376PLT-29

4376PLT-24

T4268

3788-2

3788-3

3777-3

3775-8

3790-2

3787-4

3786-7

3775-6

3777-1

3789-6

4392 4593

T6008

T559

T536

5147 5146

WH-113

T4232

1991640

T1404

GIS ID:4770

T4235

3976P

T4820I

1791 4601

4205 4206

4376PLT-44

4376PLT-43

4376PLT-6

4376PLT-35

4376PLT-10

4376PLT-37

4638-1

WH-3522

T6006

T6009

T6007 t561

4357-1

3774-11

3774-9

3773-1301

300 3772-3 3771-5

3771-8

3790-4

3790-1

4356-1

14093396

3570A

T4954

3726339

736 737

3776-4

3778-6 3781-2

3778-5

833 3779-4 3779-1

3780-5

340 735 738

3783-7 3782-83784-4 3782-9

3784-2 3782-10 3784-13785-10

3785-11

750746745

747744

867328

704703

5112 5114

319319-A

844324

819818

322 800 815817

804803

2728 3125

3083 3068

35523115

30883117

27222724

3140 3106

3137 3086

2933 2877

30913098

WH-1083097

2878 3089

4376PLT-9

4376PLT-2

4376PLT-47

4376PLT-46

17734110X

5096-21

5090-25091-8

5094-15 5094-13

5094-9

5093-5

5092-1

2876 3099

4376PLT-3

4376PLT-33

4376PLT-4

4376PLT-32

4376PLT-39

4376PLT-382572

T4236

T4998

T4997

3742 3673 1011 250

T4951

WH-11

T4231

3978145

4158147

153 4313 4312 1790

4470 1641

5098-31

5095-17

5097-12

5110-695108-63 5107-59

5106-57 5111-325109-265106-53

5106-51

5105-47

5103-41

5102-24 5101-20

5100-33 4955

T4855

WH-10

152-14

T4230

T558

42964201 4198

4200 4199

3542A

T6020

T6019 T6017

5104-45

T4952

ACCESS ROAD

RAN

ROAD

N D

RIV

ROOSEVELT BOULEVARD

E R

D U

R O

ACCESS ROAD

MARINE CORPS AIR STATION

CHERRY POINT, NORTH CAROLINA

UPGRADE MULTIPLE LIFT STATIONS

WO# 7328490

RIVER

New Bern

Dover

Tuscarora KinstonUS 70

NEUSE

Pollocksville

Trenton Seven Springs

Otway

Beaufort

US 70

Morehead City

E O

C A

MaysvilleComfort

US 17

Verona

Folkstone

Dixon

Holly Ridge

NEW RIVER

Pink

Beulaville

Hill

US 117

US 421

Wallace

Jacksonville

Richlands

I T

A N

Hampstead

T L

Scott Hill

Burgaw

Leland Wilmington

Havelock

Swansboro

VICINITY MAP - MCAS CHERRY POINT, N.C.

Words Corner

C O

V E

R S

H E

E T

A N

D E

12882470

G-001

US 74 & 76

8 TYLER DRIVE

LIFT STATION

4318 LIFT

STATION

4228 LIFT

STATION

4398 LIFT

STATION

4638 LIFT

STATION

L F

ILI

151 Poole Rd. Suite 100 | Leland, NC, 28451

TEL (910) 383-1044 | FAX (910) 383-1045

www.capefearengineering.com

N.C. LICENSE # C-1621

FINAL - 09-29-2023

SUPPORT TRA INING

MCAS CHERRY POINT, NC

FINAL DESIGN

INDEX OF DRAWINGS

GENERAL

SHEET NAME NAVFAC DRAWING NO. PAGE SHEET DESCRIPTION

G-001 12882470 1 COVER SHEET & INDEX

G-002 12882471 2 GENERAL NOTES

EXISTING CONDITIONS

SHEET NAME NAVFAC DRAWING NO. PAGE SHEET DESCRIPTION

VF100 12882472 3 CIVIL EXISTING CONDITIONS PLAN

CIVIL

SHEET NAME NAVFAC DRAWING NO. PAGE SHEET DESCRIPTION

C-001 12882473 4 CIVIL GENERAL NOTES, LEGENDS, & ABBREVIATIONS

CD100 12882474 5 CIVIL DEMOLITION PLAN

CU100 12882475 6 CIVIL UTILITY PLAN

C-500 12882476 7 CIVIL DETAILS

ELECTRICAL

SHEET NAME NAVFAC DRAWING NO. PAGE SHEET DESCRIPTION

E-001 12882477 8 ELECTRICAL ABBREVIATIONS, LEGEND, DETAILS

E-002 12882478 9 ELECTRICAL SELECTIVE DEMOLITION AND GENERAL NOTES

ED101 12882479 10 ELECTRICAL POWER DEMOLITION PLAN

EP101 12882480 11 ELECTRICAL POWER PLAN

7328490

10/23/2023

AutoCAD SHX Text

%%UMCAS

AutoCAD SHX Text

%%UOAK GROVE

AutoCAD SHX Text %%uCAMP LEJEUNE

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

%%UCHERRY POINT

AutoCAD SHX Text

NORTH

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

MAXIMO WO#

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

DRAWFORM REVISION: 10 MARCH 2009

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

WEB

AutoCAD SHX Text

WEB

AutoCAD SHX Text

MTH

AutoCAD SHX Text

IPT MARINE CORPS

AutoCAD SHX Text

NAVAL STATION - NORFOLK, VA

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

CHIEF ENG/ARCH

AutoCAD SHX Text

FIRE PROTECTION

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

U.S. MARINE CORPS AIR STATION

AutoCAD SHX Text

CHERRY POINT, NORTH CAROLINA

AutoCAD SHX Text

AS NOTED

heather.perry Line heather.perry Text Box B4228 heather.perry Text Box 7388857 heather.perry Text Box 7388857

GENERAL DESIGN AND CONSTRUCTION NOTES:

1. ANY REFERENCES TO STATE GOVERNMENT, FEDERAL GOVERNMENT, OR INDUSTRY

STANDARDS OR SPECIFICATION MADE HEREIN SHALL FORM A PART OF THE WORK TO THE

EXTENT REFERENCED THERETO AND ALL MATERIALS AND WORKMANSHIP UNDER THIS

CONTRACT SHALL COMPLY WITH OR EXCEED THESE STANDARDS AND REFERENCE. ALL

REFERENCED STANDARDS SHALL BE THE LATEST EDITION.

2. ALL MANUFACTURED EQUIPMENT AND PRODUCTS SHALL BE NEW MATERIALS IN UNDAMAGED

CONDITION AND INSTALLED AS PER MANUFACTURER'S LATEST PRINTED INSTRUCTIONS,

UNLESS SPECIFIED OTHERWISE HEREIN.

3. THE CONTRACTOR IS RESPONSIBLE FOR PROTECTION OF EXISTING FACILITIES & EQUIPMENT

FROM DAMAGE DURING INSTALLATION OF THE WORK AND DURING TESTING OPERATIONS.

4. CONTRACTOR SHALL TAKE INTO ACCOUNT THE SPECIAL TREATMENT OF ANY HAZARDOUS

WASTE, AS WELL AS THE RELATED ENVIRONMENTAL IMPLICATIONS. COORDINATE WITH

CONTRACTING OFFICER REGARDING AVAILABLE TEST REPORTS ON ANY EXISTING

CONDITIONS. REFER ALSO TO GEOTECHNICAL REPORT WHICH IS AVAILABLE UPON REQUEST,

IF APPLICABLE TO THE PROJECT SCOPE. EVERY EFFORT SHALL BE MADE TO RECYCLE

ELIGIBLE MATERIALS, AND THOSE NOT SUITABLE, SHALL BE DISPOSED OF OFF BASE IN

ACCORDANCE WITH THE REQUIREMENTS OF THE (NCDEQ) NORTH CAROLINA DEPARTMENT OF

ENVIRONMENTAL QUALITY.

5. ENSURE THAT ANY DEMOLITION, UTILITY CUT AND CAPPING, AND DEBRIS REMOVAL SERVICE

PERFORMED AT THE BASE IS COMPLETED IN SUCH A MANNER THAT WILL RESTORE A NEAT

AND PROFESSIONAL APPEARANCE OF BASE AREAS.

6. THE FACILITY/AREA SHALL BE CLEANED IN ITS ENTIRETY, INCLUDING EXTERIOR AREAS,

BEFORE BEING RETURNED TO THE GOVERNMENT.

WARRANTY:

1. CONTRACTOR SHALL FURNISH A MINIMUM ONE YEAR WARRANTY AGAINST DEFECTS IN

MATERIAL AND WORKMANSHIP STARTING ON THE BENEFICIAL OCCUPANCY DATE.

GENERAL INFORMATION:

1. THE CONTRACTOR SHALL PROVIDE ALL MANAGEMENT, TOOLS, SUPPLIES, EQUIPMENT, LABOR, AND APPLICABLE LICENSES AND PERMITS NECESSARY TO COMPLETE THE PROJECT. ALL

WORK SHALL BE DONE IN STRICT ACCORDANCE WITH THE CONTRACTING DOCUMENTS, THE

STATEMENT OF WORK (SOW) AND SUBJECT TO THE TERMS AND CONDITIONS OF THE

CONTRACT AND IN ACCORDANCE WITH (UFC) UNITED FACILITIES CRITERIA, UNIFIED FACILITIES GUIDE SPECIFICATIONS (UFGS), THE INTERNATIONAL BUILDING CODE (IBC), INTERNATIONAL

PLUMBING CODE (IPC), NATIONAL ELECTRICAL CODE (NEC), NATIONAL ELECTRICAL SAFETY

CODE (NESC), NATIONAL FIRE PROTECTION ASSOCIATION (NFPA), EPA 402-K-01-001 (2008), NORTH CAROLINA DEPARTMENT OF TRANSPORTATION (NCDOT), NORTH CAROLINA

DEPARTMENT OF ENVIRONMENTAL QUALITY (NCDEQ), BASE DESIGN AND CONSTRUCTION

STANDARDS INCLUDING BASE EXTERIOR ARCHITECTURAL PLAN (BEAP), AND ALL OTHER

APPLICABLE CODES.

WORKING CONDITIONS:

1. THE CONTRACTOR SHALL TAKE ALL PRECAUTIONS TO INSURE THAT OPERATIONS ARE

CONDUCTED IN A MANNER AS TO MINIMALLY INTERFERE WITH THE NORMAL OPERATIONS OF

THE BASE AND THE SAFETY AND CONVENIENCE OF BASE PERSONNEL. THE CONTRACTOR

SHALL COORDINATE UTILITY OUTAGES WITH THE APPROPRIATE BASE UTILITY SERVICE OFFICE

AND THE USER.

GENERAL PROJECT NOTES:

1. CONTRACTOR IS RESPONSIBLE FOR VERIFYING ALL DIMENSIONS, QUANTITIES AND SQUARE

FOOTAGES. ALL DIMENSIONS, QUANTITIES AND SQUARE FOOTAGES INCLUDED ARE

APPROXIMATIONS. CONSTRUCTION AND DEMOLITION SHALL BE IN STRICT ACCORDANCE WITH

THE BASE DESIGN AND CONSTRUCTION STANDARDS. THE INFORMATION PROVIDED IN THE

STATEMENT OF WORK (SOW), THE PROVIDED DRAWINGS, AND THE REQUIREMENTS OF THE

BASE. DESIGN AND CONSTRUCTION STANDARDS SHALL BE DETERMINED TO BE THE MINIMUM

STANDARDS REQUIRED IN THIS PROJECT.

2. THE CONTRACTOR SHALL VIDEO ALL AREAS IN WHICH WORK SHALL OCCUR PRIOR TO

STARTING WORK TO INCLUDE INTERIOR AND EXTERIOR JOB SITE AND SURROUNDING AREA.

UFC'S TAKE PRECEDENCE OVER ALL STANDARDS, CODES AND BASE DESIGN STANDARDS AND

REQUIREMENTS THAT PERTAIN TO THE WORK WITHIN THIS SOW.

3. DURING CONSTRUCTION, THE CONTRACTOR SHALL TAKE CARE NOT TO DAMAGE EXISTING

STRUCTURES, ETC. THAT WILL NOT BE REPLACED AS PART OF THIS CONTRACT. CONTRACTOR

SHALL BE RESPONSIBLE FOR THE TEMPORARY SUPPORT OF ALL DEVICES AS REQUIRED TO

PERFORM WORK. ANY DEMOLITION WORK THAT NEEDS TO BE ACCOMPLISHED TO COMPLETE

THE CONTRACT IS THE RESPONSIBILITY OF THE CONTRACTOR. ALL MATERIAL SHALL BE

INSTALLED PER MANUFACTURERS' RECOMMENDATIONS. ALL ITEMS LISTED IN THE SOW ARE

TO BE SUPPLIED AND INSTALLED BY THE CONTRACTOR UNLESS OTHERWISE NOTED.

4. A PRE-CONSTRUCTION MEETING WILL BE HELD AT THE BASE TO INCLUDE THE CONTRACTOR

AND GOVERNMENT REPRESENTATIVES. THE GOVERNMENT SHALL SET UP THIS MEETING WITH

THE CONTRACTOR AND GOVERNMENT REPRESENTATIVES, TO DISCUSS ALL PERTINENT

PROJECT REQUIREMENTS, AS WELL AS ANY OTHER CONSTRUCTION ISSUES THE

CONTRACTOR MAY HAVE. WHERE FINISHES ARE PART OF THE PROJECT SCOPE, ALL FINISHES

SHALL BE PRESENTED TO THE CONTRACTING OFFICER AS ONE SUBMITTAL FOR SELECTION

AND APPROVAL PRIOR TO INSTALLATION. ALL MATERIAL THAT COULD BE DISCONTINUED

SHALL BE ON-SITE, PRIOR TO STARTING PROJECT SO THERE WILL BE NO DIFFERENCE IN

COLOR OR PATTERN.

5. WHERE SPECIFIC PART NUMBERS OR MANUFACTURERS ARE REFERENCED, IT SHALL BE

UNDERSTOOD THAT THE CONTRACTOR MAY SUBMIT A PROPOSED EQUAL FOR

CONSIDERATION.

6. THE TERM "SHALL" WHERE USED IS EQUIVALENT TO "MUST". ALL WORK AND MATERIALS

NOTED ARE NEW UNLESS NOTED OTHERWISE.

7. THE TERM "INSTALL" WHERE USED IS EQUIVALENT TO "PROVIDE", (FURNISH AND INSTALL

COMPLETE).

G E

N E

R A

L N

12882471

G-002

L F

ILI

151 Poole Rd. Suite 100 | Leland, NC, 28451

TEL (910) 383-1044 | FAX (910) 383-1045

www.capefearengineering.com

N.C. LICENSE # C-1621

FINAL - 09-29-2023

SUPPORT TRA INING

MCAS CHERRY POINT, NC

7328490

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

MAXIMO WO#

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

DRAWFORM REVISION: 10 MARCH 2009

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

WEB

AutoCAD SHX Text

WEB

AutoCAD SHX Text

MTH

AutoCAD SHX Text

IPT MARINE CORPS

AutoCAD SHX Text

NAVAL STATION - NORFOLK, VA

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

CHIEF ENG/ARCH

AutoCAD SHX Text

FIRE PROTECTION

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

U.S. MARINE CORPS AIR STATION

AutoCAD SHX Text

CHERRY POINT, NORTH CAROLINA

AutoCAD SHX Text

AS NOTED

heather.perry

X X

UNK

20.0

HOUSE

PACKAGE LIFT STATION

RIM: 19.58

IE IN: 16.14

TO CONTROL POINT: 502

85FT

S46° 39' 33.97"W

REFERENCE

POINT

MASONRY

SCREEN WALL

LIFT STATION

CONTROL PANEL

X X

UPW

SAND BAGS

22.5

23.0

23.5

24.0

24.5

22.0

SWALLOW RD

YARD SPIGOT

REFERENCE

POINT

TO CONTROL POINT: 501

149.76FT

S18° 01' 28.00"W

24.0

24.5

2" PVC

4" DIP

BOLLARD (TYP)

SCADA

PANELS AND

ANTENNA

CONTROL

PANEL

LIFT STATION VAULT

RIM 23.79'

IE IN 18.03'

±48' TO

BUILDING

YARD SPIGOT

BUILDING 4318

REFERENCE

POINT

TO CONTROL POINT: 503

71.75FT

S74° 39' 54.98"W

2" PVC

LIFT STATION

RIM 19.73'

IE IN 18.48'

SCADA PANELS

AND ANTENNA

ELEC/ PUMP

CONTROL PANELS

4" PVC

.021

19.5

LIFT STATION

RIM 17.10'

IE IN 13.13'

U P

REFERENCE

POINT

(BOLLARD)

TO CONTROL POINT: 505

46.69FT

N57° 53' 16.16"E

4" DIP

1.2 5"

PVC

BOLLARD (TYP)

SCADA

PANEL AND

ANTENNA

ELEC/ PUMP

CONTROL

PANELS

16.5

±78' TO

BUILDING

LIFT STATION

RIM 25.92'

IE IN 21.37'

U P

BUILDING 4638

REFERENCE

POINT

TO CONTROL POINT: 500

59.09FT

S48° 23' 29.71"W

2" PVC

4" P

SCADA

PANELS AND

ANTENNA

ELEC/ PUMP

CONTROL

PANELS

26.5

4 4228 LIFT STATION

PLAN

NORTH

1" = 10'

1"=10'-0"SCALE:

5' 10' 20' 30'0

3 4318 LIFT STATION

PLAN

NORTH

1" = 10'2 4398 LIFT STATION

PLAN

NORTH

1" = 10'

5 4638 LIFT STATION

PLAN

NORTH

1" = 10'

1 8 TYLER DRIVE LIFT STATION

PLAN

NORTH

1" = 10'

CIVIL EXISTING CONDITIONS PLAN CIVIL EXISTING CONDITIONS PLAN

CIVIL EXISTING CONDITIONS PLANCIVIL EXISTING CONDITIONS PLAN

CIVIL EXISTING CONDITIONS PLAN

G C

O N

S P

12882472

VF100

L F

ILI

151 Poole Rd. Suite 100 | Leland, NC, 28451

TEL (910) 383-1044 | FAX (910) 383-1045

www.capefearengineering.com

N.C. LICENSE # C-1621

GENERAL SHEET NOTES

FINAL - 09-29-2023

SUPPORT TRA INING

MCAS CHERRY POINT, NC

SURVEY NOTES

1. EXISTING CONDITIONS SURVEY PERFORMED BY CAPE FEAR ENGINEERING IN MARCH 2023.

2. SURVEY CONTROL DATA ESTABLISHED, UTILIZING NORTH CAROLINA VIRTUAL REFERENCE STATION (VRS) SYSTEM.

3. HORIZONTAL DATUM IS NAD '83 AND ELEVATIONS ARE BASED ON NAVD '88 (2011) VERTICAL DATUM.

4. UNDERGROUND UTILITIES LOCATED BY CAPE FEAR ENGINEERING USING A COMBINATION OF GPR, LOCATING EQUIPMENT, AND VISIBLE PHYSICAL EVIDENCE.

5. CONTROL POINTS:

500 503 N: 433654.20' N: 437562.25' E: 2630400.99' E: 2637675.51'

ELEV: 24.88' ELEV: 24.74'

501 505 N: 437649.31' N: 436771.64' E: 2631499.39' E: 2638610.64'

ELEV: 24.69' ELEV: 16.30'

N: 442367.76' E: 2638543.24'

ELEV: 20.56'

1. SEE SHEETS C-001 AND C-002 FOR CIVIL GENERAL NOTES, LEGENDS, AND ABBREVIATIONS.

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

7328490

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

MAXIMO WO#

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

DRAWFORM REVISION: 10 MARCH 2009

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

WEB

AutoCAD SHX Text

WEB

AutoCAD SHX Text

MTH

AutoCAD SHX Text

IPT MARINE CORPS

AutoCAD SHX Text

NAVAL STATION - NORFOLK, VA

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

CHIEF ENG/ARCH

AutoCAD SHX Text

FIRE PROTECTION

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

U.S. MARINE CORPS AIR STATION

AutoCAD SHX Text

CHERRY POINT, NORTH CAROLINA

AutoCAD SHX Text

AS NOTED

heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line heather.perry Line

E N

E R

A L

N O

12882473

C-001

L F

ILI

151 Poole Rd. Suite 100 | Leland, NC, 28451

TEL (910) 383-1044 | FAX (910) 383-1045

www.capefearengineering.com

N.C. LICENSE # C-1621

FINAL - 09-29-2023

SUPPORT TRA INING

MCAS CHERRY POINT, NC

CIVIL GENERAL NOTES:

1. REFER TO THE PROJECT SPECIFICATIONS IN ALL SITUATIONS. BRING CONFLICTS BETWEEN PROJECT SPECIFICATIONS AND PLANS TO THE ATTENTION OF THE CONTRACTING OFFICER AND/OR ENGINEER FOR RESOLUTION. ALL MATERIALS AND WORKMANSHIP

MUST CONFORM TO THE PROJECT SPECIFICATIONS.

2. EXISTING UTILITY INFORMATION IS NOT TO BE RELIED ON AS BEING EXACT OR COMPLETE. LOCATION, VERIFICATION, SUPPORT AND PROTECTION OF ALL ABOVE GROUND AND UNDERGROUND UTILITIES TO REMAIN IN PLACE, INCLUDING ANY UTILITIES NOT INDICATED ON CONTRACT DRAWINGS IS REQUIRED. ANY CONFLICTS OR DISCREPANCIES MUST BE BROUGHT TO THE CONTRACTING OFFICER'S AND/OR ENGINEER'S ATTENTION IMMEDIATELY. CAPE FEAR ENGINEERING HAS NOT PHYSICALLY

LOCATED ANY UNDERGROUND UTILITIES.

3. PRIOR TO ANY EXCAVATION, CONTRACTOR MUST HAVE THE EXISTING UNDERGROUND LINES MARKED ON THE GROUND SURFACE IN THE AREAS OF CONSTRUCTION. POTHOLE AND PHYSICALLY VERIFY DEPTH AND LOCATION OF ALL UTILITY LINES IN THE WORK AREA THAT REQUIRE COORDINATION WITH WORK ITEMS. POTHOLE VERIFICATION MUST BE DONE WELL IN ADVANCE OF ACTUAL WORK SO THAT POTENTIAL UTILITY CONFLICTS CAN BE VERIFIED AND RESOLVED WITHOUT CAUSING SCHEDULE DELAYS.

4. PROTECT ALL EXISTING STRUCTURES, TREES, PAVEMENT, UTILITIES, AND OTHER PROPERTY UNLESS THEY ARE TO BE DEMOLISHED. ANY PROPERTY NOT AUTHORIZED FOR REMOVAL, BUT DAMAGED BY THE CONTRACTOR MUST BE RESTORED BY THE CONTRACTOR TO THEIR PRE-CONSTRUCTION CONDITION OR BETTER AT NO ADDITIONAL EXPENSE TO THE OWNER.

5. MAKE EVERY EFFORT TO SAVE PROPERTY IRONS, MONUMENTS, OTHER PERMANENT POINTS AND LINES OF REFERENCE AND CONSTRUCTION STAKES. PROPERTY IRONS, MONUMENTS, AND OTHER PERMANENT POINTS OF REFERENCE DESTROYED BY THE

CONTRACTOR MUST BE REPLACED AT THE CONTRACTOR'S EXPENSE.

6. WORK PERFORMED UNDER THIS CONTRACT MUST NOT IMPACT THE OPERATION OF ANY ADJACENT PROPERTIES UNLESS A

UTILITY OUTAGE HAS BEEN APPROVED IN ADVANCE.

7. SEQUENCE WORK AS NECESSARY TO ENSURE THAT ALL UTILITY SERVICES, INCLUDING FIRE HYDRANTS, REMAIN OPERATIONAL

DURING CONSTRUCTION.

8. RESTORE ANY ACCESS ROADS AND STAGING AREAS USED BACK TO THEIR PRE-CONSTRUCTION CONDITION OR BETTER.

VEGETATE ALL DISTURBED AREAS IN ACCORDANCE WITH THE PROJECT SPECIFICATIONS.

9. TAKE ADEQUATE PROTECTIVE MEASURES TO ENSURE THAT EXISTING PAVEMENT SURFACES ARE NOT DAMAGED FROM TRACKED CONSTRUCTION EQUIPMENT OR ANY OTHER POSSIBLE SOURCE WHEN EQUIPMENT IS BEING MOVED. REPAIR ANY PAVED AREAS

DAMAGED DURING CONSTRUCTION TO THEIR PRE-CONSTRUCTION CONDITION OR BETTER.

10. EXISTING PAVEMENTS AND ALL OTHER AREAS ADJACENT TO THE SITE MUST BE KEPT CLEAN AT ALL TIMES. DO NOT ALLOW BUILD

UP OF SOIL, MUD, DUST OR OTHER DEBRIS.

11. CONTRACTOR IS RESPONSIBLE FOR ALL SURVEYING AND STAKING TO COMPLETE THE WORK.

12. ANY AND ALL MATERIAL QUANTITIES INDICATED ON THIS PLAN SET ARE FOR REFERENCE ONLY. CONTRACTOR MUST VERIFY ALL

MATERIAL QUANTITIES SHOWN.

13. KEEP REDLINE MARK-UPS OF ANY CHANGES MADE FROM THE APPROVED PLAN AND PROVIDE COPY OF REDLINES TO ENGINEER

UPON PROJECT COMPLETION.

EXISTING CONDITION NOTES:

1. SEE SHEET VF100 FOR EXISTING CONDITIONS AND SURVEY INFORMATION.

OFFSITE BORROW AREA NOTES

1. CONTRACTOR IS RESPONSIBLE FOR ENSURING OFFSITE BORROW AREA HAS AN APPROVED EROSION CONTROL PERMIT AND

APPROPRIATE MEASURES IN PLACE PRIOR TO LAND DISTURBING ACTIVITY.

2. NO BORROW MATERIALS ARE AVAILABLE ON GOVERNMENT PROPERTY.

DEMOLITION PLAN NOTES:

1. LOCATE UNDERGROUND UTILITIES AND COORDINATE DEMOLITION AND / OR RELOCATION WORK. SPECIFICALLY TAKE EXTRA CAUTIONARY MEASURES TO PREVENT DISRUPTION OF ANY TELECOM FIBER IN THE PROJECT AREA. ONCE LOCATED IN THE FIELD, POSITIVE VERIFICATION BY POTHOLING IS REQUIRED. REPORT ANY CONFLICTS OR DISCREPANCIES TO ENGINEER.

2. LIMITS OF DEMOLITION AND DIMENSIONS ARE SHOWN FOR GENERAL REFERENCE. CONTRACTOR MUST BE RESPONSIBLE FOR REMOVAL OF ALL ITEMS, INCLUDING ALL EXCAVATED MATERIALS NECESSARY TO COMPLETE WORK WITHIN THIS CONTRACT.

3. WHERE ASPHALT/CONCRETE DEMOLITION IS REQUIRED, USE A SAW CUT AT THE LIMITS OF DEMOLITION OR NEAREST JOINT TO

OBTAIN A CLEAN VERTICAL EDGE.

4. DEDICATED DEMOLITION AND OTHER WASTE AREAS/EARTHEN MATERIAL STOCKPILES MUST BE LOCATED AT LEAST 50' FROM

STORMDRAINS OR STREAMS.

5. REPORT ANY UNSUITABLE SOILS, CONTAMINATED SOILS, AND BURIED CONCRETE AND DEBRIS TO THE CONTRACTING OFFICER.

6. UNDERGROUND UTILITIES SHOWN ON THE DEMOLITION PLANS MAY EXTEND FURTHER THAN SHOWN. CONTRACTOR IS RESPONSIBLE FOR COMPLETE REMOVAL OF UTILITIES WITHIN THE ENTIRE PROJECT SITE UNLESS OTHERWISE NOTED.

STORMWATER AND GRADING NOTES:

1. NO INSTALLATION OF IMPERVIOUS SURFACES IN EXCESS OF 10,000 SF SHALL BE DONE PRIOR TO OBTAINING APPROVAL FROM NORTH CAROLINA DEPARTMENT OF ENVIRONMENTAL QUALITY (NCDEQ). THE CONTRACTOR IS RESPONSIBLE FOR ENSURING ANY DESIGN CHANGES REQUIRED BY NCDEQ ARE INCORPORATED INTO THE CONSTRUCTION DOCUMENTS.

2. ALL CUT OR FILL SLOPES MUST BE 3:1 OR FLATTER UNLESS OTHERWISE NOTED.

3. DURING CONSTRUCTION, PERFORM GRADING IN A MANNER AND SEQUENCE THAT WILL PROVIDE PROPER DRAINAGE AT ALL

TIMES.

4. ADJUST AND/OR CUT EXISTING PAVEMENT AS NECESSARY TO ASSURE A SMOOTH FIT AND CONTINUOUS GRADE.

5. FOR ALL NEW BUILDINGS, PROVIDE A MINIMUM 5% SLOPE AWAY FROM THE BUILDING FOR THE FIRST 10-FEET AND ASSURE THAT FINISHED FLOOR ELEVATIONS ARE A MINIMUM OF 6-INCHES ABOVE THE ADJACENT SITE GRADE IN NON-PAVED AREAS.

6. ALL STORM PIPE MUST BE CLASS III REINFORCED CONCRETE PIPE (RCP), UNLESS OTHERWISE NOTED ON THE PLANS.

7. UPON THE COMPLETION OF CONSTRUCTION AND SITE STABILIZATION, ALL NEW PIPES AND EXISTING PIPES IMPACTED BY CONSTRUCTION MUST BE CLEANED TO REMOVE ALL ACCUMULATED SILT, SEDIMENT AND DEBRIS.

8. ALL STORM PIPE ENTERING STRUCTURES (NEW AND EXISTING) MUST BE CUT FLUSH TO INSIDE OF THE BOX AND GROUTED TO ASSURE CONNECTION AT STRUCTURE IS WATER TIGHT; MAXIMUM PROTRUSION MUST BE 6 INCHES.

9. ALL STORMWATER STRUCTURES IN PAVED AREAS MUST BE FLUSH WITH PAVEMENT AND BE HEAVY-DUTY TRAFFIC RATED.

EROSION CONTROL NOTES:

1. TOTAL DISTURBED AREA IS LESS THAN 1.0 ACRE. A LAND DISTURBANCE PERMIT IS NOT REQUIRED.

2. ALL EROSION AND SEDIMENT CONTROL MEASURES MUST BE IN ACCORDANCE WITH THE NORTH CAROLINA SEDIMENTATION AND

EROSION CONTROL DESIGN MANUAL (LATEST EDITION).

3. DIMENSIONS AND GRADES SHOWN ON THE PLANS MUST BE FIELD VERIFIED BY THE CONTRACTOR PRIOR TO CONSTRUCTION.

NOTIFY THE ENGINEER IN WRITING IF DISCREPANCIES EXIST PRIOR TO PROCEEDING WITH CONSTRUCTION FOR NECESSARY

PLAN OR GRADE CHANGES.

4. PROVIDE POSITIVE DRAINAGE AWAY FROM THE SITE AT ALL TIMES.

5. IF UNFORESEEN EROSIVE CONDITIONS DEVELOP DURING CONSTRUCTION AS THE RESULT OF INCREASED RUNOFF OR SEDIMENT DISPLACEMENT, THE CONTRACTOR SHALL TAKE ACTION TO REMEDY SUCH CONDITIONS AND PREVENT DAMAGE TO ADJACENT

PROPERTIES.

6. EROSION AND SEDIMENT CONTROL MEASURES SHALL BE MAINTAINED CONTINUOUSLY, RELOCATED WHEN NECESSARY, AND SHALL BE CHECKED FOR STABILITY AND PROPER FUNCTIONING AFTER EVERY RAINFALL EVENT.

SEQUENCE OF LAND DISTURBANCE:

1. PRECONSTRUCTION CONFERENCE TO BE HELD PRIOR TO THE BEGINNING OF WORK.

2. INSTALL TEMPORARY CONSTRUCTION ENTRANCE.

3. INSTALL TEMPORARY SILT FENCE AND SILT FENCE ROCK OUTLETS.

4. PROVIDE TEMPORARY INLET PROTECTION AT EXISTING INLETS/ PIPES.

5. INSPECT AND MAINTAIN ALL EROSION CONTROL DEVICES EVERY 7 DAYS AND AFTER EACH SIGNIFICANT RAINFALL EVENT (1.0" OR

GREATER).

6. PLACE TEMPORARY SEEDING, INCLUDING MULCHING AND CRIMPING, IN ALL AREAS THAT ARE TO BE LEFT IDLE FOR MORE THAN

14 DAYS.

7. PERMANENT GRASS MUST BE INSTALLED PER PROJECT SPECIFICATIONS FOR ALL AREAS AT FINAL GRADE AND IN SEASON.

FERTILIZE, WATER AND REPLACE TO ESTABLISH A VIGOROUS STAND OF GRASS. TEMPORARY IRRIGATION MAY BE REQUIRED

UNTIL GRASS IS FULLY ESTABLISHED.

8. AFTER COMPLETION OF CONSTRUCTION AND THE SITE IS STABILIZED, REMOVE ALL ACCUMULATED SEDIMENT FROM SILT FENCE AND OTHER EROSION CONTROL MEASURES. GRASS THESE AREAS IMMEDIATELY AND REMOVE ALL EROSION CONTROL

MEASURES.

9. CONTRACTOR IS RESPONSIBLE FOR SPREADING EXCAVATED SPOILS ON SITE AND GRADE WITH SMOOTH TRANSITIONS TO MATCH EXISTING GRADE. CONTRACTOR TO MAINTAIN POSITIVE DRAINAGE AT ALL AREAS. ALL IN ACCORDANCE WITH ALL LOCAL, STATE, AND FEDERAL REGULATIONS.

ABBREVIATIONS

A/C AIR CONDITIONER

ATFP ANTI TERRORISM FORCE PROTECTION

BFF BELOW FINISHED FLOOR

BLDG BUILDING

BMP BEST MANAGEMENT PRACTICE

BW BARBED WIRE

C&G CURB AND GUTTER

CB CATCH BASIN

CC CONCRETE CURB

CI CURB DROP INLET

CJ CONTRACTION JOINT

CLF CHAIN LINK FENCE

CMH COMMUNICATION MANHOLE

CONC CONCRETE

D/B DESIGN/BUILD

DCJ DOWELED CONSTRUCTION JOINT

DI DROP INLET

DPW DEPARTMENT OF PUBLIC WORKS

DUMP DUMPSTER

E EAST

EHH ELECTRICAL HANDHOLE

EG EXISTING GAS

EJ EXPANSION JOINT

ELEC ELECTRIC

EMH ELECTRICAL MANHOLE

EL ELEVATION

FDC FIRE DEPARTMENT CONNECTION

FES FLARED END SECTION

FFE FINISH FLOOR ELEVATION

FL FLOW LINE

GFGI GOVERNMENT FURNISHED, GOVERNMENT INSTALLED

HW HEAD WALL

IE INVERT ELEVATION

LP LIGHT POLE

LSA LANDSCAPE STONE

MAT MATERIAL

MH MANHOLE

MOF METAL ORNAMENTAL FENCE

MUTCD MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES

N NORTH

NCDEQ NORTH CAROLINA DEPARTMENT OF ENVIRONMENTAL QUALITY

NCDOT NORTH CAROLINA DIVISION OF TRANSPORTATION

NE NORTHEAST

NIC NOT IN CONTRACT

NOAA NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION

NW NORTHWEST

PNG PIEDMONT NATURAL GAS

PP POWER POLE

PT PHYSICAL TRAINING

PVC POLYVINYL CHLORIDE

RCP REINFORCED CONCRETE PIPE

S SOUTH

SCM STORMWATER CONTROL MEASURE

SDMH STORM DRAIN MANHOLE

SE SOUTHEAST

SEP SEPARATION

SMH SANITARY SEWER MANHOLE

STA STATION

STY STORY

SW SOUTHWEST

TC TOP OF CURB

TD TRENCH DRAIN

TE THICKENED EDGE

TEJ THICKENED EDGE EXPANSION JOINT

THH TELECOMMUNICATION HANDHOLE

TMH TELECOMMUNICATION MANHOLE

TRANS TRANSFORMER

TSB TEMPORARY SEDIMENT BASIN

TYP TYPICAL

UG UNDERGROUND

UNK UNKNOWN

W WEST

W/BW WITH BARBED WIRE

WV WATER VALVE

WW WING WALL

SYMBOL LEGEND:

DETAIL

REFERENCE

SECTION

DETAIL TITLE

NOT TO SCALE

VIEW TITLE

DETAIL TITLE

IDENTIFICATION

NUMBER

SHEET # FOR

SECTION/DETAIL

SCALE

IDENTIFICATION

NUMBER

IDENTIFICATION

NUMBER

SHEET # FOR

SECTION/DETAIL

C-500

SCALE

VIEW TITLE

1" = 20'

PLAN

NORTH

X X X X

BUILDING

CONCRETE SIDEWALK

PROTECTIVE BOLLARD

SURVEYOR BENCHMARK

COMMUNICATIONS

MANHOLE

ELECTRICAL

GUYWIRE

MANHOLE

LIGHT POLE

POWER POLE

SWITCHBOX

TRANSFORMER

SYMBOL LEGEND

DESCRIPTION

SITE

DEMO

PROPOSEDEXISTING

LINETYPE LEGEND

DESCRIPTION

SITE

DEMO PROPOSEDEXISTING

ROADWAY CENTERLINE

PAVEMENT MARKING

X X X XCHAINLINK FENCE X X X X

[] [] [] [] []WOOD FENCE [] [] [] [] []

FENCE GATE

TREE LINE

COMMUNICATIONS

UC UCUNDERGROUND UC

OC OCOVERHEAD OC

ELECTRICAL

UP UPUNDERGROUND UP

OE OEOVERHEAD OE

X X X X

NOTE: NOT ALL SYMBOLS, LINETYPES, AND ABBREVIATIONS SHOWN HERE WILL BE USED

UC UC

OC OC

UP UP

X X X X

SSCO

RIM: XX.XX

IE: XX.XX

SSMH

RIM: XX.XX

IE: XX.XX

CATCH BASIN

RIM: XX.XX

IE: XX.XX

SDMH

RIM: XX.XX

IE: XX.XX

SANITARY SEWER

MANHOLE

CLEANOUT

STORMWATER

INLET

MANHOLE

WATER

VALVE

SSMH

RIM: XX.XX

IE: XX.XX

CATCH BASIN

RIM: XX.XX

IE: XX.XX

SDMH

RIM: XX.XX

IE: XX.XX

SSMH

RIM: XX.XX

IE: XX.XX

CATCH BASIN

RIM: XX.XX

IE: XX.XX

SDMH

RIM: XX.XX

IE: XX.XX

SANITARY SEWER

SS SSGRAVITY SEWER PIPE SS

FM FMSEWER FORCEMAIN PIPE FM

STORMWATER

SD SDSTORMDRAIN PIPE SD

RD RDROOFDRAIN PIPE RD

CONTOURS (MAJOR)

CONTOURS (MINOR) 19.0'

20.0'

19.0'

20.0'

WATER

W WWATERLINE W

SS SS

FM FM

SD SD

RD RD

W W

19.0'

20.0'

7328490

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

MAXIMO WO#

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

DRAWFORM REVISION: 10 MARCH 2009

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

WEB

AutoCAD SHX Text

WEB

AutoCAD SHX Text

MTH

AutoCAD SHX Text

IPT MARINE CORPS

AutoCAD SHX Text

NAVAL STATION - NORFOLK, VA

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

CHIEF ENG/ARCH

AutoCAD SHX Text

FIRE PROTECTION

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

U.S. MARINE CORPS AIR STATION

AutoCAD SHX Text

CHERRY POINT, NORTH CAROLINA

AutoCAD SHX Text

AS NOTED

heather.perry

X X

UNK

20.0

HOUSE

PACKAGE LIFT STATION

RIM: 19.58

IE IN: 16.14

MASONRY

SCREEN WALL

LIFT STATION

CONTROL PANEL

TYP.

X X

UPW

SAND BAGS

22.5

23.0

23.5

24.0

24.5

22.0

SWALLOW RD

YARD SPIGOT

24.0

24.5

2" PVC

4" DIP

BOLLARD (TYP)

SCADA

PANELS AND

ANTENNA

CONTROL

PANEL

LIFT STATION VAULT

RIM 23.79'

IE IN 18.03'

TYP.

YARD SPIGOT

BUILDING 4318

2" PVC

LIFT STATION

RIM 19.73'

IE IN 18.48'

SCADA PANELS

AND ANTENNA

ELEC/ PUMP

CONTROL PANELS

4" PVC

.021

19.5

LIFT STATION

RIM 17.10'

IE IN 13.13'

U P

4" DIP

1.2 5"

PVC

BOLLARD (TYP)

SCADA

PANEL AND

ANTENNA

ELEC/ PUMP

CONTROL

PANELS

16.5

7 LIFT STATION

RIM 25.92'

IE IN 21.37'

U P

BUILDING 4638

2" PVC

4" P

SCADA

PANELS AND

ANTENNA

ELEC/ PUMP

CONTROL

PANELS

26.5

4 4228 LIFT STATION

PLAN

NORTH

1" = 10'

3 4318 LIFT STATION

PLAN

NORTH

1" = 10'2 4398 LIFT STATION

PLAN

NORTH

1" = 10'

5 4638 LIFT STATION

PLAN

NORTH

1" = 10'

1 8 TYLER DRIVE LIFT STATION

PLAN

NORTH

1" = 10'

CIVIL DEMOLITION PLAN CIVIL DEMOLITION PLAN

CIVIL DEMOLITION PLANCIVIL DEMOLITION PLAN

CIVIL DEMOLITION PLAN

E M

N P

12882474

CD100

L F

ILI

151 Poole Rd. Suite 100 | Leland, NC, 28451

TEL (910) 383-1044 | FAX (910) 383-1045

www.capefearengineering.com

N.C. LICENSE # C-1621

GENERAL SHEET NOTES

SHEET KEYNOTES

FINAL - 09-29-2023

SUPPORT TRA INING

MCAS CHERRY POINT, NC

1. DEMOLISH LIFT STATION COMPLETE INCLUDING WETWELL, PUMPS, CONTROLS, AND

APPURTENANCE.

2. EQUIPMENT RACK, SCADA, AND ANTENNA TO REMAIN. PROTECT FROM DAMAGE AND

SPACE/SUPPORT AS REQUIRED DURING PUMP STATION REMOVAL AND INSTALLATION OF

NEW STATION.

3. EXISTING SEWER SERVICE TO BE CAPPED, PLUGGED AS REQUIRED UNTIL NEW PUMP

STATION IS OPERATIONAL AND ACCEPTED BY GOVERNMENT FOR USE. CONTRACTOR IS

RESPONSIBLE FOR PROVIDING TEMPORARY FACILITIES AND/OR BYPASS PUMPING TO

ENSURE NO DISRUPTION IN SERVICE.

4. REMOVE EXISTING SEWER SERVICE FOR INSTALLATION OF NEW CLEANOUT.

5. REMOVE SIDEWALK TO NEAREST JOINT.

6. REMOVE SAND BAGS.

7. REMOVE BOLLARDS.

8. EXISTING FORCEMAIN TO BE FLUSHED CLEAN. AFTER CLEANING. PERFORM PRESSURE

TEST. INSTALL PLUGS AND/OR VALVES AS REQUIRED TO COMPLETE TESTING.

9. REMOVE PUMPS, CONTROLS, AND APPURTENANCES FROM EXISTING WETWELL. REMOVE

TOP 1-FOOT OF EXISTING WETWELL STRUCTURE. FILL REMAINING WETWELL WITH CLEAN

SAND. BACKFILL AREA TO WATCH ADJACENT GRADE.

10. REMOVE FORCEMAIN MIN 5' FROM WETWELL TO BE ABANDONED

1. SEE SHEETS C-001 AND C-002 FOR CIVIL GENERAL NOTES, LEGENDS, AND ABBREVIATIONS.

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

7328490

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

MAXIMO WO#

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

DRAWFORM REVISION: 10 MARCH 2009

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

WEB

AutoCAD SHX Text

WEB

AutoCAD SHX Text

MTH

AutoCAD SHX Text

IPT MARINE CORPS

AutoCAD SHX Text

NAVAL STATION - NORFOLK, VA

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

CHIEF ENG/ARCH

AutoCAD SHX Text

FIRE PROTECTION

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

U.S. MARINE CORPS AIR STATION

AutoCAD SHX Text

CHERRY POINT, NORTH CAROLINA

AutoCAD SHX Text

AS NOTED

X X

UNK

HOUSE

MASONRY

SCREEN WALL

LIFT STATION

CONTROL PANEL

C-500

UGE

TYP.

C-500

TYP.

X X

UPW

SWALLOW RD

YARD SPIGOT

2" PVC

4" DIP

SCADA

PANELS AND

ANTENNA

CONTROL

PANEL

TYP.

C-500

YARD SPIGOT

BUILDING 4318

2" PVC

SCADA PANELS

AND ANTENNA

ELEC/ PUMP

CONTROL PANELS

4" PVC

C-500

TYP.

U P

4" DIP

1.2 5"

PVC

BOLLARD (TYP)

SCADA

PANEL AND

ANTENNA

ELEC/ PUMP

CONTROL

PANELS

C-500

TYP.

C-500

U P

BUILDING 4638

2" PVC

4" P

SCADA

PANELS AND

ANTENNA

ELEC/ PUMP

CONTROL

PANELS

C-500

TYP.

C-500

4 4228 LIFT STATION

PLAN

NORTH

1" = 10'

3 4318 LIFT STATION

PLAN

NORTH

1" = 10'2 4398 LIFT STATION

PLAN

NORTH

1" = 10'

5 4638 LIFT STATION

PLAN

NORTH

1" = 10'

1 8 TYLER DRIVE LIFT STATION

PLAN

NORTH

1" = 10'

CIVIL UTILITY PLAN CIVIL UTILITY PLAN

CIVIL UTILITY PLANCIVIL UTILITY PLAN

CIVIL UTILITY PLAN

12882475

CU100

L F

ILI

151 Poole Rd. Suite 100 | Leland, NC, 28451

TEL (910) 383-1044 | FAX (910) 383-1045

www.capefearengineering.com

N.C. LICENSE # C-1621

GENERAL SHEET NOTES

SHEET KEYNOTES

FINAL - 09-29-2023

SUPPORT TRA INING

MCAS CHERRY POINT, NC

1. SEE SHEETS C-001 AND C-002 FOR CIVIL GENERAL NOTES, LEGENDS, AND ABBREVIATIONS.

1. SIMPLEX PACKAGE GRINDER PUMP STATION COMPLETE.

2. PUMP STATION CONTROLS TO BE FULLY COMPATIBLE AND INTEGRATED INTO EXISTING

SCADA SYSTEM (SEE ELECTRICAL).

3. TIE EXISTING SEWER SERVICE INTO NEW LIFT STATION WET WELL.

4. TIE PUMP STATION DISCHARGE FORCEMAIN TO EXISTING FORCEMAIN.

5. EXTEND AND TIE FORCEMAIN (2" SDR-21 OR SCH 80 PVC) AS REQUIRED TO CONNECT TO THE

EXISTING SEWER SERVICE. INSTALL BENDS AS REQUIRED.

6. REPLACE SIDEWALK.

7. FILL AREA AROUND NEW LIFT STATION TO PROVIDE POSITIVE DRAINAGE.

8. ALL DISTURBED AREAS TO BE STABILIZED.

9. INSTALL NEW SEWER CLEANOUT.

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

1"=10'-0"SCALE:

5' 10' 20' 30'0

7328490

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

MAXIMO WO#

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

DRAWFORM REVISION: 10 MARCH 2009

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

WEB

AutoCAD SHX Text

WEB

AutoCAD SHX Text

MTH

AutoCAD SHX Text

IPT MARINE CORPS

AutoCAD SHX Text

NAVAL STATION - NORFOLK, VA

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

CHIEF ENG/ARCH

AutoCAD SHX Text

FIRE PROTECTION

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

U.S. MARINE CORPS AIR STATION

AutoCAD SHX Text

CHERRY POINT, NORTH CAROLINA

AutoCAD SHX Text

AS NOTED

12882476

C-500

L F

ILI

151 Poole Rd. Suite 100 | Leland, NC, 28451

TEL (910) 383-1044 | FAX (910) 383-1045

www.capefearengineering.com

N.C. LICENSE # C-1621

FINAL - 09-29-2023

SUPPORT TRA INING

MCAS CHERRY POINT, NC

SITE AREA DESCRIPTION

PERIMETER DIKES, SWALES, DITCHES

AND SLOPES

HIGH QUALITY WATER (HQW) ZONES

SLOPES STEEPER THAN 3:1

SLOPES 3:1 OR FLATTER

ALL OTHER AREAS WITH SLOPES

FLATTER THAN 4:1

STABILIZATION

7 DAYS

14 DAYS

NONE

IF SLOPES ARE 10' OR LESS IN LENGTH AND ARE

NOT STEEPER THAN 2:1, 14 DAYS ARE ALLOWED

7 DAYS FOR SLOPES GREATER

THAN 50' IN LENGTH.

NONE, EXCEPT FOR PERIMETERS AND HQW

ZONES

TIMEFRAME EXCEPTIONS

NEW STABILIZATION TIMEFRAMES

STABILIZATION SCHEDULE

NOT TO SCALE

PROVIDE SAND-BASED CENTIPEDE SOD (EREMOCHLOA OPHIUROIDES) FOR ALL TURF AREAS. SODDING SHALL BE INSTALLED AND MAINTAINED IN ACCORDANCE WITH SECTION 6.12 OF THE NCDEQ EROSION CONTROL PLANNING AND DESIGN MANUAL AND PROJECT SPECIFICATIONS. SEE SHEET C-002 FOR ADDITIONAL SPECIFICATIONS AND MAINTENANCE CONSIDERATIONS.

TEMPORARY STABILIZATION

PERMANENT STABILIZATION

MAINTENANCE

NOTES

FERTILIZATION/ FERTILIZATION/ACRE

UNWEATHERED; AVOID WEEDS

QUALITY

DRY, UNCHOPPED,

750 LBS. 10-10-10

SPREAD BY HAND OR MACHINE, MUST

BE TACKED DOWN.

SHOULD COME FROM WHEAT OR OATS2 TONS

AMOUNT/

ACRE

MATERIAL

STRAW

GRASS TYPE

RATE PER ACRE

ACRE

NADEC 1 - APR 15

SEEDING

TIME OF

GERMAN MILLET 40 LBS.

NA1,000 LBS. 10-10-10120 LBS.RYE (GRAIN) NAAUG 15-DEC 30

750 LBS. 10-10-10 NA NA

RYE (GRAIN) &

LESPEDEZA, KOBE

120 LBS. &

50 LBS.

APRIL 15-AUG 15

TEMPORARY SEEDING SHALL BE INSTALLED AND MAINTAINED IN ACCORDANCE WITH SECTION 6.10 AND PERMANENT SEEDING SHALL BE INSTALLED AND MAINTAINED IN ACCORDANCE WITH SECTION 6.11 OF THE NCDEQ EROSION CONTROL PLANNING AND DESIGN MANUAL. SODDING SHALL BE INSTALLED AND MAINTAINED IN ACCORDANCE WITH SECTION 6.12 OF THE NCDEQ EROSION CONTROL

PLANNING AND DESIGN MANUAL AND PROJECT SPECIFICATIONS.

MULCHING MATERIALS AND APPLICATION RATES

TEMPORARY SEEDING

CLEANOUT/SERVICE

CONNECT TO BUILDING SEWER

(INSTALL FITTINGS AS REQUIRED)

CONNECT TO MAINS

(INSTALL FITTINGS

AS REQUIRED)

PLUG AT

END OF LINE

4" DIA PIPE

CAST IRON

CLEANOUT COVER

THREADED FITTING

4" REMOVABLE

THREADED PLUG

EXISTING GRADE

2' SQUARE X 4" THICK

CONCRETE SLAB (IF

NOT IN PAVEMENT)

NOT TO SCALE2

ITEM DESCRIPTION

1. FIBERGLASS BASIN, 48"x72" WITH FIBERGLASS ANTI-FLOAT 5/8" 304

SS SIMPLEX MOUNTING STUDS

2. POLYPROPYLENE ACCESS COVER NUTS GLASSED INTO BASIN LID

3. 2" NPT GLASS FILLED PLASTIC ELECTRICAL COUPLING FLANGE

ASSEMBLY WITH GASKET KIT

4. GUIDE RAIL BASE ASSEMBLY

5. 2" SCH. 40 TYPE 304 SS GUIDE RAILS

6. 2" SCH. 80 PVC DISCHARGE PIPE (TYPICAL)

7. 2"NPT BRASS FLAPPER CHECK VALVE (THREADED)

8. 2" SCH. 80 PVC TRUE UNION BALL VALVE

9. 2" SCH. 80 PVC ELBOWS (2)

10. 1/4" 316 STAINLESS STEEL LIFTING CHAIN WITH 5/16" SS SHACKLE

11. 316 SS SIX HOOK CABLE HOLDER FLOAT BRACKET

12. 316 SS UPPER GUIDE WITH ALUMINUM SUPPORT GUIDE

13. 4" FLEXIBLE INLET HUB

14. VALVE BOX - HDPE 24"x 18"x 18"

15. DISCHARGE CONNECTION, 2" SCH. 80 PVC (SOLVENT WELD)

16. FLOAT SWITCHES

17. SIMPLEX SUBMERSIBLE GRINDER PUMP STATION PACKAGE

18. 2" 316 SS OR BRASS NIPPLE

19. 1 - 1/4" THREADED x PE SCH. 80 PVC NIPPLE

20. 1 - 1/4" x 2" REDUCING BUSHING SCH. 80 PVC

21. 2" IPT x HDPE ADAPTER

22. 2,500 PSI CONCRETE AROUND BASE TO PREVENT FLOTATION

DISCONNECT

WATER TIGHT

CONNECTION

VENT

CONTROL PANEL STAINLESS STEEL 3"Ø VENT

WITH INSECT SCREEN

#57 STONE

NOTES

1. CONTRACTOR IS TO PROVIDE A PACKAGED PUMP

STATION/CONTROL PANEL UNIT FROM A SINGLE

VENDOR AND SHALL BE CAPABLE OF HANDLING

DOMESTIC WASTE. ALL PUMP STATION EQUIPMENT AND

INSTALLATION SHALL BE IN ACCORDANCE OF THE MOST

RECENT N.C. STATE PLUMBING CODE.

2. PUMP STATION SHALL BE CAPABLE OF PUMPING 25 GPM

AT 48 FEET TDH. PUMP STATION SHALL BE 208V,

3-PHASE, 3-WIRE. (30-AMP STARTING APPROXIMATE)

3. PUMP STATION ELECTRICAL SUPPLY SHALL BE FED

FROM THE BUILDING'S PANEL. AS INDICATED ON THE

ELECTRICAL PLANS

4. PUMP STATION CONTROL PANEL SHALL SUPPLY POWER

TO ALARMS FROM A SEPARATE BREAKER THAN PUMP

MOTORS PER NC STATE PLUMBING CODE 712.3.4.1

5. PACKAGE GRINDER PUMP STATION BY THE FOLLOWING

MANUFACTURERS:

FLYGT, MYERS, BARNES, E-ONE, OR APPROVED EQUAL

#57 STONE

℄ DISCHARGE

℄ BASIN

18"

24"

12"

MIN. RUNTIME

W/NO FLOW

1 MINUTE

36" MIN.

ENGINEER

11 2 12

10 15

7 18 8

18"

6"6"

"H" MSL

BOTTOM

BASIN

"A" MSL

OR HIGHER

"B" MSL

TOP STATION

"C" MSL

FINISH GRADE

"E" W. W. ALARM ON

"G" MSL

PUMP OFF

4" MIN.

24'

"F" MSL

PUMP ON

48" 36"36"

12"

2,500 PSI CONCRETE

NOT TO SCALE

SIMPLEX PACKAGED GRINDER PUMP STATION

FINISH GRADE

CONCRETE SIDEWALK/STOOP

NOTES:

1. EXPANSION, CONTRACTION AND CONSTRUCTION JOINTS SHALL BE INSTALLED PER PROJECT SPECIFICATIONS.

2. WHERE NEW SIDEWALK MEETS EXISTING SIDEWALKS, EXISTING PAVEMENTS, NEW PAVEMENTS AND BUILDINGS, CONTRACTOR SHALL INSTALL 6" THICKENED EDGES AND COMPRESSIBLE FILLER STRIPS AT ENDS WHERE ABUTS EXISTING

CONCRETE.

3. CONCRETE COMPRESSIVE STRENGTH SHALL BE PER SPECIFICATIONS.

HAND TOOLED 1/4" R

ALL EDGES

6"X6" W2.1X2.1 WWF-MESH

TO BE PROVIDED IN SHEETS

X X X X X X X X X X X X

SLOPE TO DRAIN (1/4"/FT)

COMPACTED SUBGRADE

(VARIES)

LIFT STATION PUMP ELEVATION SCHEDULE

LIFT STATION

LOCATION/ID

"A"

ELEVATION

(VENT)

"B"

ELEVATION

(RIM)

"C" ELEVATION

(GROUND)

"D"

ELEVATION

(INVERT IN)

"E"

ELEVATION

(ALARM)

"F"

ELEVATION

(PUMP ON)

"G"

ELEVATION

(PUMP OFF)

"H"

ELEVATION

(BOTTOM)

8 TYLER DRIVE 21.25' 19.75' 19.25' ±16.14' 15.66' 15.16' 14.16' 12.16'

BLDG. 4398 26.50' 25.00' 24.50' ±18.0' 17.50' 17.00' 16.00' 14.00'

BLDG. 4318 21.50' 20.00' 19.50' ±18.40' 17.90' 17.40' 16.40' 14.40'

BLDG. 4228 19.00' 17.50' 17.00' ±13.10' 12.60' 12.10' 11.10' 9.10'

BLDG. 4638 27.50' 26.00' 25.50' ±21.30' 20.80' 20.30' 19.30' 17.30'

"D" INVERT IN

LIFT STATION PUMP ELECTRICAL SCHEDULE

LIFT

STATION

LOCATION/ID

VOLTAGE PHASE AMPERAGE SCADA NOTES

8 TYLER

DRIVE 240V SINGLE

20/2 AMP BREAKER

(2 HOTS, 1 GROUND) N/A N/A

BLDG. 4398 208V THREE

20/3 AMP BREAKER

(3 HOTS, 1 NEUTRAL, 1

GROUND)

TO REMAIN AND BE

PROTECTED DURING

DEMOLITION AND

CONSTRUCTION

CONTROLLER WILL REQUIRE A 120V

CONTROL TRANSFORMER PROVISION TO

POWER THE SCADA/ TELEMETRY CABINET.

THE EXISTING SCADA/ TELEMETRY RACK IS

TO REMAIN WITH 120V POWER TO BE

SOURCED FROM THE NEW CONTROLLER.

BLDG. 4318 208V SINGLE

20/2 AMP BREAKER

(2 HOTS,1 NEUTRAL, 1

GROUND)

TO REMAIN AND BE

PROTECTED DURING

DEMOLITION AND

CONSTRUCTION

CONTROLLER WILL REQUIRE A 120V

CONTROL TRANSFORMER PROVISION TO

POWER THE SCADA/ TELEMETRY CABINET.

THE EXISTING SCADA/ TELEMETRY RACK IS

MOUNTED TO THE BUILDING WALL AND IS

TO REMAIN WITH 120V POWER TO BE

SOURCED FROM THE NEW CONTROLLER.

BLDG. 4228 208V SINGLE

30/2 AMP BREAKER

(2 HOTS, 1 NEUTRAL, 1

GROUND)

TO REMAIN AND BE

PROTECTED DURING

DEMOLITION AND

CONSTRUCTION

CONTROLLER WILL REQUIRE A 120V

CONTROL TRANSFORMER PROVISION TO

POWER THE SCADA/ TELEMETRY CABINET.

THE EXISTING SCADA/ TELEMETRY RACK IS

TO REMAIN WITH 120V POWER TO BE

SOURCED FROM THE NEW CONTROLLER.

BLDG. 4638 208V THREE

15/3 AMP BREAKER

(3 HOTS, 1 GROUND)

TO REMAIN AND BE

PROTECTED DURING

DEMOLITION AND

CONSTRUCTION

CONTROLLER WILL REQUIRE A 120V

CONTROL TRANSFORMER PROVISION TO

POWER THE SCADA/ TELEMETRY CABINET.

THE EXISTING SCADA/ TELEMETRY RACK IS

TO REMAIN WITH 120V POWER TO BE

SOURCED FROM THE NEW CONTROLLER.

7328490

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

MAXIMO WO#

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

DRAWFORM REVISION: 10 MARCH 2009

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

WEB

AutoCAD SHX Text

WEB

AutoCAD SHX Text

MTH

AutoCAD SHX Text

IPT MARINE CORPS

AutoCAD SHX Text

NAVAL STATION - NORFOLK, VA

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

CHIEF ENG/ARCH

AutoCAD SHX Text

FIRE PROTECTION

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AutoCAD SHX Text

U.S. MARINE CORPS AIR STATION

AutoCAD SHX Text

CHERRY POINT, NORTH CAROLINA

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

NOT TO SCALE

L A

B B

R E

N S

, L E

G E

N D

, D E

12882477

E-001

L F

ILI

151 Poole Rd. Suite 100 | Leland, NC, 28451

TEL (910) 383-1044 | FAX (910) 383-1045

www.capefearengineering.com

N.C. LICENSE # C-1621

2246 Yaupon Dr.

Wilmington, NC

28401

Engineers, PLLC

023311

RCNLE

SEAL

EENI GN

P R

OF E S S I ON

RT H CAROL I NA

7328490

FINAL - 09-29-2023

SUPPORT TRA INING

MCAS CHERRY POINT, NC

09.29.2023

TYPICAL ABBREVIATIONS:

A, AMP AMPERE

AFF ABOVE FINISHED FLOOR

AFG ABOVE FINISHED GRADE

AHU AIR HANDLING UNIT

AIC AMPERE INTERRUPTING CAPACITY

ATS AUTOMATIC TRANSFER SWITCH

AWG AMERICAN WIRE GAUGE

BOF BOTTOM OF FIXTURE

BRKR BREAKER

C, CND CONDUIT

CAB CABINET

CAT CATALOG

CL CHLORINE

CB CIRCUIT BREAKER

CCTV CLOSED CIRCUIT TELEVISION

CKT CIRCUIT

CLG CEILING

CP CONTROL PANEL

CR CONTROL RELAY, CORROSION RESISTANT

CS CONTROL SWITCH

CV CONTROL VALVE

CT CURRENT TRANSFORMER

CU COPPER

EF EXHAUST FAN

EM EMERGENCY

EMT ELECTRICAL METALLIC TUBING

ENCL ENCLOSURE

EQ, EQIP EQUIPMENT

EWC ELECTRIC WATER COOLER

EWH ELECTRIC WATER HEATER

EPRF EXPLOSION PROOF

FA FIRE ALARM

FAAP FIRE ALARM ANNUNCIATOR PANEL

FACP FIRE ALARM CONTROL PANEL

FBO FURNISHED BY OTHERS

FLA FULL LOAD AMPS

FLUOR FLUORESCENT

FLR FLOOR

FWE FURNISHED WITH EQUIPMENT

GEN GENERATOR

G, GND GROUND

GFI, GFCI GROUND FAULT CIRCUIT INTERRUPTER

HH HANDHOLE

HID HIGH INTENSITY DISCHARGE

HOA HAND-OFF-AUTO

HP HORSE POWER

HPF HIGH POWER FACTOR

HPS HIGH PRESSURE SODIUM

HTR HEATER

HV HIGH VOLTAGE

Hz HERTZ

IMC INTERMEDIATE METALLIC CONDUIT

INCAND INCANDESCENT

JB JUNCTION BOX

K THOUSAND

Kcmil THOUSAND CIRCULAR MILLS

KVA KILOVOLT AMPERE

KW KILOWATTS

KWH KILOWATT-HOURS

LP LIGHTING PANEL, LIGHT POLE

LTG LIGHTING

MCB MAIN CIRCUIT BREAKER

MCC MOTOR CONTROL CENTER

MCP MOTOR CIRCUIT PROTECTOR

MDP MAIN DISTRIBUTION PANEL

MFR MANUFACTURER

MH MANHOLE

MLO MAIN LUGS ONLY

MTD MOUNTED

MTG MOUNTING

MTS MANUAL TRANSFER SWITCH

MV MEDIUM VOLTAGE

N, NEUT NEUTRAL

N/A NOT APPLICABLE

NC NORMALLY CLOSED

NEC NATIONAL ELECTRIC CODE

NIC NOT IN CONTRACT

NL NIGHT LIGHT

NO NORMALLY OPEN

NTS NOT TO SCALE

P POLE

PA PUBLIC ADDRESS

PB PULL BOX, PUSH-BUTTON

PF POWER FACTOR

PH,ɸ PHASE

PLC PROGRAMMABLE LOGIC CONTROLLER

PNL PANEL

PP POWER PANEL, POWER POLE

PT POTENTIAL TRANSFORMER

PWR POWER

RECPT,RCP RECEPTACLE

REQ'D REQUIRED

RGS RIGID GALVANIZED STEEL CONDUIT

RM ROOM

RTU REMOTE TELEMETRY UNIT

SCR DC MOTOR DRIVE

SH SHEET

SM SURFACE MOUNTED

SPEC SPECIFICATION

SS SELECTOR SWITCH

SST STAINLESS STEEL

SW SWITCH

SWBD SWITCHBOARD

SWGR SWITCH GEAR

TEL TELEPHONE

TPS TWISTED PAIR SHIELDED

TVSS, SPD TRANSIENT VOLTAGE SURGE SUPPRESSER

TYP TYPICAL

UG, UGND UNDERGROUND

UH UNIT HEATER

UON UNLESS OTHERWISE NOTED

UTIL UTILITY

V VOLTS

VFD VARIABLE FREQUENCY DRIVE

W WIRE, WATT

WH WATT-HOUR

WP WEATHERPROOF

XFMR TRANSFORMER

(X) EXISTING

ELECTRICAL LEGEND

CONDUIT, HOME RUN TO PANEL BOARD

POWER & SWITCH LEG

UNSWITCHED LEG

WEATHERPROOF SWITCH, SINGLE POLE 120/277 VAC, 20A, MOUNTED AT 46" AFF UNLESS

OTHERWISE NOTED.S WP

DISCONNECT SWITCH, FUSED, HEAVY DUTY, SIZE AS INDICATED ON DRAWINGS

##A = DISCONNECT SIZE / # = NUMBER OF POLES / # = NEMA RATING, / ##AF = FUSE SIZE

30A/3/4X

W/ 30AF

MANUAL MOTOR STARTER, ELECTRICAL CONTRACTOR SHALL COORDINATE POLES

AND SIZE WITH EQUIPMENT

## = AMPERAGE RATING WHEN INDICATED ON DRAWING

SM ##

(X)PANELBOARD, SURFACE OR RECESSED MOUNTED AS SHOWN. SIZE, RATINGS, AND

MOUNTING AS INDICATED ON PANEL SCHEDULE. CONTRACTOR IS RESPONSIBLE FOR

REQUIRED CLEARANCE IN FRONT OF ELECTRICAL PANEL. SEE NEC TABLE 110.26

WORKING SPACES FOR ADDITIONAL CLEARANCE CONDITIONS.

208/120V

480/277V

WALL MOUNTED 120V EMERGENCY OFF PUSH BUTTON WITH RED MUSHROOM STYLE HEAD

WITH MANUAL PULL REST, NORMALLY OPEN, WITH CLEAR PROTECTIVE COVER. MOUNTED

AT 46" AFF UNLESS OTHERWISE NOTED.

EPO

RECEPTACLE, DUPLEX, GROUND FAULT CIRCUIT INTERRUPTER TYPE, 120VAC, 20A, MOUNTED

16" AFF, UNLESS OTHERWISE NOTED. (SEE ELECTRICAL MOUNTING HEIGHT DETAIL)

HATCHING INDICATES ITEMS TO BE DEMOLISHED. REMOVE DEVICE, EQUIPMENT, FIXTURE

INDICATED, CIRCUIT, AND CONDUIT BACK TO SOURCE UNLESS OTHERWISE NOTED.

DEMOLITION KEY NOTE SYMBOL

KEY NOTE SYMBOL

FIXTURE DESIGNATION

HAND HOLE, IN GRADE, TIER RATING AS INDICATED ON DRAWING

JUNCTION…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 15, 2025.