Response to RFI 70Z04424IC2PLSAAS.xlsx

Response to RFI

2.

If your company is not interested in this proposed procurement as a prime contractor, please provide the names/SAM UEI of your interested authorized dealers and their business size.

1. Is your company the small manufacturer, processor, or producer of the end item being proposed (that meets the technical requirements below)?

2. Is the end item manufactured/processed/produced in your company's own facilities?

3. Is the end item manufactured or produced in the United States or its outlying areas?

4. Does your company have 600 or less employees (NAICS 335999/ 600 size standard)? 1.

2.

3.

4.

Small Nonmanufacturers (Nonmanufacturer rule)

1. Is your company a small business that proposes to furnish an end item (that meets the technical requirements below) that it did not itself manufacture, process, or produce?

2. Will your company propose an end item that a another small business has manufactured, processed, or produced in the United States or its outlying areas?

3. Does your company have 500 or less employees?

4. Is your company primarily engaged in the retail or wholesale trade and normally sell the type of item being proposed/supplied?

5. Will your company take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice; for example, providing storage, transportation, or delivery? 1.

2.

3.

4.

5.

Small Kit Assemblers (Nonmanufacturer rule)

1. Is your company a small business that proposes to furnish an end item (that meets the technical requirements below) that is a kit of supplies?

2. Does your company have 500 or less employees?

3. Is at least 50 percent of the total cost of the components of the kit manufactured, processed, or produced in the United States or its outlying areas by business concerns that are small under the size standards for the NAICS codes of the components of the kit? 1.

2.

3.

Buy American statute: Is the proposed end item/product a domestic end product?

(Reference FAR Clause 52.225-1 and reference FAR 25.003 for definition of a "domestic end product") Trade Agreement Act (TAA):

1. If the proposed end item/product is not a domestic end product, is it TAA compliant?

2. What is the country of origin?

(Reference FAR Subpart 25.4) 1.

2.

Does your company comply with Section 889? (DOES NOT provide covered telecommunications equipment or services as a part of its offered products/services to the Government in the performance of any contract, subcontract or other contractual instrument and DOES NOT use covered telecommunications equipment or services or any equipment, system, or service that uses covered telecommunications equipment or services) (Reference FAR Provision 52.204-26)

DRAFT requirements for UPS replacement on the WLB-225 Platform for A&AS and ECDIS

* Please specify below if your proposed solution Exceeds, Meets, or Does Not Meet each minimum/threshold requirement/specification in the left column.

* Please provide additional information if your proposed solution Does Not Meet a specific requirement.

* Please provide additional information if your proposed solution can Exceed a specific requirement.

* You may also provide data sheets to supplement this form.

Warranty The contractor shall provide a standard commercial warranty for a minimum of 12 months after delivery of equipment to the USCG. Product warranties shall include a product return policy. Any Original Equipment Manufacturing (OEM) warranties associated with products delivered under this contract/order shall be available directly to the USCG.

Minimum Delivery Schedule Quantity of 2 ea of each solution available delivered 30 days after award. Remaining can be shipped at a later date pending Government acceptance.

FOB Destination Possible Delivery Locations: Portsmouth VA and/or Baltimore MD Quantity 18 ea of each solution available total over an anticipated base and option periods (2-3 years).