70RFP325QEH000014 Amendment 0005.pdf

(x)

70RFP325QEH000014

x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

OPO/FPS/EAST CCG/R3

DHS/FPS/East CCG/Region 3 U.S. Dept. of Homeland Security Ofc of Procurement Operations - FPS 701 Market Street, Suite 4200 Attn: Marcus Mason Philadelphia PA 19106Philadelphia PA 19106

701 Market Street, Suite 4200

70RFP3

Federal Protective Service Acq. Division Office of Procurement Operations U.S. Dept. of Homeland Security

FPS EAST CCG DIV 3 ACQ DIV(70RFP3)

07/01/20250005

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

04/23/2025

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of this amendment is to provide responses to questions received in response to the solicitation.

A. The answers to the questions and attached photos are provided for informational purposes, any changes resulting from the questions and answers are documented within

Amendment 0005. If there is a conflict between the solicitation and the information provided in the answers to the questions, the solicitation governs.

B. The period of performance has been updated to reflect 10/01/2025 - 09/30/2030.

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Marcus L. Mason

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 2

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

70RFP325QEH000014/0005

c. The attached provisions are hereby incorporated into and made a part of this solicitation.

D. The attached Department of Labor Wage Determination 2015-4281 Revision 33 is hereby incorporated into and made a part of this solicitation.

E. The solicitation closing date is hereby changed to July 18, 2025, at 4:00 PM. All solicitation submissions shall be submitted to Marcus Mason via email at marcus.l.mason@fps.dhs.gov.

FOB: Destination

Period of Performance: 10/01/2025 to 09/30/2030

POC: CO: Marcus Mason email: marcus.l.mason@fps.dhs.gov

Phone: 817-690-1657

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

CLIN 0001 10/01/2025 - 09/30/2026

CLIN 0002 10/01/2025 - 09/30/2026

CLIN 1001 10/01/2026 - 09/30/2027

CLIN 1002 10/01/2026 - 09/30/2027

CLIN 2001 10/01/2027 - 09/30/2028

CLIN 2002 10/01/2027 - 09/30/2028

CLIN 3001 10/01/2028 - 09/30/2029

CLIN 3002 10/01/2028 - 09/30/2029

CLIN 4001 10/01/2029 - 09/30/2030

CLIN 4002 10/01/2029 - 09/30/2030

Question # Question Solicitation Reference Response a)Vendors will be in the area next Tuesday, May 9th, and is requesting to conduct a site walk of the facility on that date, if possible.

b)Additionally, could you please let us know if there is any flexibility in extending the proposal deadline to accommodate this

Amendments 0002 and

a) Site visit was scheduled/conducted on 5/15/2025

b) Closing date for RFQ is 7/15/2025 at 4:00 PM (EST)

2 Is there a visitation day established so that we may inspect both ranges Amendment 0002 see response to question 1

(a) Is there an incumbent for this job?

(b) If there is an incumbent, what is the award number and amount N/A a)Yes - SAF Industries

b) 70RFP319PEH000005 and award amount is $1,673,078.80

4 How many lanes are in Range 1, and Range 2? N/A 12 points / lanes on each range 5 What are the dimensions of both ranges? N/A approx 50 feet x 100 feet 6 What are the dimensions of the weapons cleaning room? N/A approx 15 feet x 40 feet

a) What floor are the ranges on?

b) If the ranges are not on ground level, do we have elevator access?

c)(i) If there are elevators, what is the load capacity? N/A

a) Concrete floor b)Gound Level

c) N/A

8 Who is the manufacturer and what is the model of the target conveying system?

N/A Manufacture is On Target. Model number is unknown.

a) In Task 4, should all filters be replaced every quarter?

b) or is the timing different for mid-filters, and HEPA filters?

c) Please note that the weight of the Mid-Filters and HEPA filters, if changed quarterly, will make the facility a RCRA "Large Quantity Generator" of hazardous waste

Statement of Work para

a) Yes.

b) No

c) Noted

10 Who is the manufacturer and what is the model of the filter housing units? N/A There are 2 Daikin RTU Model -MPS061ELAS6 and 2 Filtration AHU Daikin Model OAH071GVAM a)Where are the filter housing units located?

b)If the filter housing units are located on the roof, is there roof access?

c) If the filter housing units are located on the roof, how many storeys is the roof?

N/A

A. On the roof of the building B. Yes C. 2 Story

12 Who is responsible for disposal of used dust filters? N/A The awarded contractor.

13 Do the bullet traps of both ranges have a hopper that needs to be refilled periodically?

N/A Yes

a) Historically, has there been a need to have a contractor come in on an emergency notice?

b) If so, (above) how often has this occurred on a yearly basis? N/A

a) No

b) N/A

If awarded, will the contractor be given the two ranges EPA ID number for hazardous waste disposal manifest documentation? N/A Yes.

a) Is there any incumbent/recompete or this is a brand-new project?

B) If yes, could you please provide us with their award number or even if the customer bought similar services in the past. N/A see responses to question 3.

a)We would like to know if this is a brand new contract OR if there is (was) an incumbent performing these services.

b)If not brand new, could you please provide the current / previous contract number?

N/A see responses to question 3.

a) How do we get into the range?

b) Double doors?

c)Doors large enough for our equipment?

N/A

A) Singel Door on both Range 1 and 2

b) Range 1 also has a double door.

C) Single door is 36". Double door is comprised of two 30" doors. Vendor's must take into consideration door sizes when determining what equipment will be used.

19 Do you have a Forklift/Dock ? N/A Yes. There is access to forklft/Dock.

20 Job working hours?

Statement of Work para

12.0 M-F 06:00 am - 3:00 PM

21 How many rounds do you shoot a year? N/A Approx 750,000 to 1 Million Rounds a)Do you have any brass?

B) If so, how much? N/A

a) Yes

b) approximately 750,000 to 1 million rounds

23 How many lanes in each bay? N/A see respoonse to question 4.

24 What is the width and length of each bay? N/A Approximately 4 feet wide x 75 feet long 25 What is the size of the range floor? N/A Approximately 50 feet x 100 feet, plus the backstop for each range 26 What is the measurement behind the firing line? N/A Approximately 15 feet behind each shooting booth X 50 feet long 27 What is the measurement behind the trap? N/A Approximately 6 feet behind the trap 28 Do you have curtains and if so, how many and width of them? N/A 1 curtain per lane. Estimated 3 - 4 Foot wide.

29 Do you have a viewing window? N/A Yes both ranges have a control booth with window/ viewing

30 Do you have a 240v outlet? Single Phase? N/A

a) No

b) Yes for 120v outlet

a) Do you have baffles and

b) if so, how many and how wide are they? N/A

a) Yes

b) 15 from firing line to End / Size 4x2

32 What is the length of the target rails? N/A 25 Yards

33 What type of ventilation system do you have? N/A There are 2 Daikin RTU Model -MPS061ELAS6 and 2 Filtration AHU Daikin Model OAH071GVAM

How many and what type of filters do you have in the ventilation system? ( Pre-Filters, Mid- Filters, HEPA Filters). N/A See Statement of Work section 4.0

35 What size are your filters? N/A See Statement of Work section 4.0 36 Where is the filter box located? N/A See response to question 11 37 do you have fire retardant on the rubber? N/A Unknown

What is the length, width and dept of your rubber berm? To measure depth, Get a 4' x 3/4" hardwood dowel and mark it at 24", 30", and 36". Then, use a rubber mallet to hammer it into the rubber horizontally mid-way up the trap until it reaches the structure underneath.

Then read the depth on the dowel. N/A Unknown

a) Do you need rubber?

b) If so, how much? N/A Unknown

40 a)Are there any rooms connected to the range?

b) If so, what are their dimensions? N/A

a) Yes both ranges have a control booth and there is a cleaning room connected to both ranges.

B) Control room estimated 10' X 12'. Cleaning room estimated 15' X 40'

41 I will need pictures of the range and it’s components. N/A

a) Photos of the entrance to the door at the rear of the range (how we get our equipment in) N/A see attached

b) Full shot of the bullet trap face N/A see attached

c) Close up of the granulated rubber (with an object for scale, pen, etc) N/A Not Available

d) Photo of one of the baffles (from the front and back) N/A see attached

e) Photo of the target carrier and rails N/A see attached

f) Photos of the shooting area, including the walls, safety ceiling, shooting booths, etc N/A see attached

70RFP325QEH000014 Amendment 0005

Question # Question Solicitation Reference Response

a) What is the length and height of the rubber trap of both ranges?

b) What is the length of each range? N/A

a) 1 rubber trap per lane. Estimated 7' high X 3' - 4' wide.

b) 25 yards.

43 a) Square footage of the weapons cleaning room and control/booth?

b) how many tables need to be cleaned in the weapons cleaning room and control/booth?

c)Clean the walls on both ranges to the ceiling or a certain height? N/A

a) Weapons Cleaning Room estimated 600 SF and Control Both estimated 120

SF.

b) table shelf along both front and back wall running entire length

c) Ceiling a)How will the lead and brass proceeds be managed?

B) CLient keeps 100%, MT2 keeps 100% or 50-50 split?

C) How much brass is on site currently?

D) How many rounds and what calibers have been fired since last reclamation event?

Statement of Work para 2.3

a) See Statement of Work 2.3, Brass Shell Casings

b) Government 100% less recoveries for recycling and transport.

c) See Statement of Work 2.3, Brass Shell Casings

d) Unknown

a) Are the filter counts provided for both ranges or is that per range?

b) Is range or contractor responsible for providing the filters?

c) Where is the HVAC equipment located?

d) Is a ladder, manlift or fall protection harness required? N/A

a) both ranges

b) contractor

c) see responses to question 11

d) No

46 Clean the walls on both ranges to the ceiling or a certain height? N/A see response to question 43 47 what is the square footage of the area from the firing line to the back wall? N/A Approx 750 Sq Feet 15 Feet X 50 Feet 48 What is the height of the safety ceiling? N/A Estimated 7' - 8.5' 49 What’s the square footage of this area? N/A 50x15 = 750 SqFt

a) Is there room to store any unused rubber?

b) How much rubber do you want to have on standby for this, each order is a minimum of 2,000 lbs? N/A

A. No B. None

a) How many baffles are there?

b) What are the length and width of the baffles?

c) Do you want both sides cleaned or just the side facing the range? N/A

a) see response to question 31

b) see resposne to question 31

c) side facing range

52 What are the length, height, and thickness of the curtains on both ranges? N/A see response to question 42

a) What does access look like?

b) Is the range on the main floor of the building?

c) Are there stairs, 90 degree angles?

d) How many doors and what are there widths? N/A

a) see attached photos

b) range is on the main floor

c) No Stairs to ranges. No 90 degree angles to ranges.

d) see response to question 18

54 Can the range provide specs or plans of both ranges? N/A No

55 Can pictures be provided of both ranges. Please include trap, firing line, weapons room, control booth, access points, filter location, and anything else that would need to be cleaned. N/A see attached photos.

56 What target systems are used on each range? N/A On Target 57 Will there be a place to store our equipment/materials on-site? N/A No

a) Is there specific documentation that FPS is looking for to be submitted regarding lead cleaning records?

B)On-site daily cleaning activity logs? N/A

a) Only documentation identified in Statement of Work

b) No

Section 2.1 of the RFP states "The Government will give the Contractor no more than five (5) consecutive days unescorted access to the firing range facilities for maintenance/ repair/cleaning. In the event an emergency repair that needs to be made on the range(s) falls during a weekend, would we be given access to the site? N/A Yes.

Are there designated Central Accumulation Areas (CAAs) on-site for waste storage (i.e lead contaminated mop water, lead rags etc.)? N/A No.

61 What is the access request process for any subcontractors we would bring in for a repair etc.? N/A There will be Government contacts onsite to facilitate building access.

If shipments/deliveries of materials such as filters, rubber panels etc. are required, would these need to be brought on-site by us or would the delivery company be able to come in escorted? N/A

There is a dock and forklift. Contractors must coordinate with onsite facilities prior to shipments/deliveries.

Section 7.0 of the RFO states "Any material costs for corrective maintenance over $500 requires COR and CO approval prior to purchase." Can you please explain the process for this?

Do we submit an estimate/work order to the COR (markup included)? How long would this approval take? N/A

a) All material costs for corrective maintenance are over $500 contractor will email the COR and CO with what items are required.

b) Yes

c) Estimated 1 workday.

Section 7.0 of the RFP states "In the event purchases must be made immediately, within one

(1) hour to ensure that security is not compromised, the Contractor may purchase material without COR and CO approval. This sentence is unclear, can you explain what this means? N/A

In the event you need to purchase something immediately for the range related to safety/security reasons, you don't need the COR/CO approval. You will need to provide written justification for the purchase with receipt to the COR/CO.

Section 8.0 of the RFP states " The Contractor shall establish and maintain a HMCM Program for total life cycle control of all hazardous material and hazardous wastes located at the facility and shall provide an employee experienced in the management of lead projects." Will FPS require this employee to have any specific certification/training? N/A Yes. See Statement of Wrok para 13

Section 8.0 of the RFP states " Contractor shall test the heating, ventilation, and air conditioning (HVAC) related waste whenever it is generated"? What analytes are being requested? N/A

Test to ensure HVAC system is performing properly.

a)Section 17.1 of the RFp states "If a prospective employee is found to be ineligible for access to Government facilities or information, the COR will advise the Contractor that the employee shall not continue to work or to be assigned to work under the contract." Is this a separate background check process from the DHS Employment Eligibility Verification (E-Verify) program operated by USCIS mentioned in Section 18.1?

b)Does this happen prior to work being performed or while the contract is ongoing? N/A a) Prior to working on any FPS contract

Per Section 26.0 regarding IT Security Awareness, will the contractor be required to hold/obtain DoDs Cybersecurity Maturity Model Certification (CMMC)? N/A No

Section 2.3 states " the price for transportation of the recyclables less any recoveries for recycling the brass castings shall be included in the price of CLINX001"? What else falls under this CLIN? Is it FPSs expectation that CLINX001 also includes all costs related to contractor labor? If not, can you please provide a full breakdown of the pricing expectation/CLIN breakdown? N/A

a) All costs to perform the entire contract except for ODC is included in CLIN X001.

b) Breakdown of pricing is at the contractors discrecition based on its bid strategy.

The RFQ document does not provide clear guidance for the required proposal. Can the Government please provide guidance, such as: N/A

a) Submission method Amendment 0005 see amendment 0005 attached Provisions

b) Evaluation factors and approach Amendment 0005 see amendment 0005 attached Provisions c)Specific technical and/or past performance requirements Amendment 0005 see amendment 0005 attached Provisions

d) Requirements for the number and submission process for Past Performance Questionnaires or CPARS Amendment 0005 see amendment 0005 attached Provisions e)Applicable page limits, format requirements, and volume content directions Amendment 0005 see amendment 0005 attached Provisions

72 Will a site visit be offered? Amendment 0002 see response to question 1.

73 When is the closing date/time for questions? Amendment 0005 see amendment 0005. Questions were due 4/29/2025

A) Can you please provide specifications of range including size, number of points/lanes?

B) Are you able to provide photos? N/A

a) 2 ranges 25 Yds. 12 lanes

b) see attached photos

a) Can you provide a list of mechanical equipment tied to each of the ranges?

B)Approximately what percentage of equipment is currently still under warranty? N/A

a) No.

b) Unknown

a) Can you specify the type of bullet trap system?

B) Are you able to provide photos? N/A

a) Unknown

b) see attached photos.

Given the number of questions, we also request that an extension be granted to allow Offerors to incorporate all information Amendment 0005 closing date revised to 7/15/2025 at 4:00 PM (EST).

SOLICITATION PROVISIONS

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6 and part 13.5, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

ADDENDUM TO FAR 52.212-1 INSTRUCTION TO OFFERORS (MAR 2023)

1. Vendors are requested to submit quotes in response to this RFQ via email Marcus Mason at marcus.l.mason@fps.dhs.gov, no later than July 11, 2025, at 4:00 PM EST.

2. Vendor’s are required to submit a completed Attachment 3: Past Performance Form with their quotes.

3. Questions regarding this RFQ shall be submitted via email to Mary Katherine Saulino at marykatherine.saulino@fps.dhs.gov and Marcus Mason at marcus.l.mason@fps.dhs.gov no later than April 29, 2025, at 4:00 PM EST.

FAR 52.212-2 - Evaluation—Commercial Products and Commercial Services (November 2021) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

• Past Performance

• Price

Past Performance:

FPS will evaluate all responses received using the evaluation criteria set forth in the RFQ. The resulting contract will be issued to the contractor that provides the best value. The non-price factor of Relevant Past Performance is more important than price.

1. Relevant Past Performance:

The Contractor is provided an opportunity to demonstrate relevant past performance on contracts currently being performed or performed within the past three (3) years. The Government will determine relevance by analyzing the “scope”, “magnitude” and “complexity” of the reference contracts and comparing them to the instant requirement. The Government reserves the right to evaluate submitted projects individually or in the aggregate in order to determine relevance and will do so consistently across all evaluated offers. The Government mailto:marcus.l.mason@fps.dhs.gov will consider the quality of the Contractor’s relevant past performance. The Government reserves the right to use any and all of the information available to include the contractor’s Quote, the past project forms submitted with the Quote, the past performance questionnaires submitted on behalf of the contractor, CPARS assessments, close at hand information and any other source to determine relevancy of projects and quality of performance by the offeror.

Reference Contracts:

a. The Contractor may submit up to a maximum of two (2) contracts for evaluation. The Government reserves the right to obtain information from sources other than those identified by the Contractor. The Government reserves the right to utilize any and all information on the Past Project Form including but not limited to hours, dollars, number of posts, number of PSOs as well as the Past Performance Questionnaires and CPARS Assessments to determine magnitude.

b. If a teaming arrangement is being proposed, refer to Notes #1 and 2 below for additional Quote submission requirements.

c. The Contractor may submit reference contracts performed by an affiliate. In order to receive credit for the past performance of an affiliate, the contractor must clearly demonstrate in its Quote that the affiliate will have meaningful involvement in the solicited requirement. Refer to Note #3 below for additional Quote submission requirements.

Past Project Form. The Contractor shall complete a Past Project Form (Attachment 3) for each reference contract submitted.

Past Performance Questionnaires.

a. Past Performance Questionnaires (Attachment 2) may be submitted for each reference contract.

b. If the contractor chooses to submit a Past Performance Questionnaire (Attachment 2) for any of its reference contracts, it shall forward the Past Performance Questionnaire to a cognizant representative of the customer organization that purchased the services from your company to provide feedback (e.g. Project Manager, Contracting Officer’s Representative). The Contractor shall instruct the customer representative to complete the questionnaire and return it, by the RFQ submission due date, directly to Marcus Mason at marcus.l.mason@fps.dhs.gov. The contractor is responsible for ensuring its customer reference returns the questionnaire to the Agency if it wishes the Agency to consider the questionnaire in its evaluation. The Agency is not obligated to follow-up with references to locate questionnaires that have not been received from customers other than FPS. The Agency may decline to reach out to FPS customers who have not retuned a questionnaire if an assessment for the most recently completed performance period is resident in the Contractor Performance Assessment Reporting System (CPARS) for the reference contract.

*Important Notes for Relevant Past Performance:

1. Where a teaming arrangement (as defined at FAR Subpart 9.6) is proposed, an additional maximum of up to two (2) projects for partner(s)/subcontractor(s) may be submitted. Thus, a maximum of no more than four (4) projects (2 for the prime and 2 for the subs or other partners) may be submitted in total. (Note for Joint Ventures: For Joint Ventures, a maximum of up to 4 projects may be submitted in total from the JV and JV partners (no more than 2 projects may be submitted for any one entity, JV or JV partner)).

2. Where a teaming arrangement is proposed, a narrative and/or the actual Teaming Agreement if one exists, shall be submitted as part of the Quote by the managing partner of the joint venture or the prime contractor. The Government is interested in the roles, responsibilities, and distribution of effort (by type and percentage) between the parties in performance of the Government’s requirement and this narrative may enhance the Government’s understanding of your Quote. If subcontractor experience is provided, the subcontractor experience will be given weight relative to the scope, magnitude and complexity of the aspects of the work under the solicitation that the subcontractor is proposed to perform. Therefore, the offeror’s Quote shall detail clearly the aspects of the work in the solicitation that the subcontractor is proposed to perform. It is the offeror’s responsibility to adequately explain the relevance of a reference provided for a subcontractor’s past performance to the effort that the subcontractor is proposed to perform under the solicitation. Be sure to consider the portion of effort proposed to be performed by partners or subcontractors in determining the most relevant references to submit.

This narrative and/or Teaming Agreement will not count against the stated page size limitation.

If the contractor fails to submit a narrative and/or the actual Teaming Agreement or if it lacks sufficient detail, the Agency, at its discretion, may decline to consider the past performance record of the teaming partner in the past performance evaluation.

3. In order to receive credit for the past performance of an affiliate, a separate narrative shall be submitted as part of the Quote clearly demonstrating that the affiliate will be meaningfully involved in performance of the solicited contract. That is, the resources of the affiliate, (e.g., workforce, management, facilities, or other resources that demonstrably contributed to the affiliate’s performance on the submitted project(s)) will be provided or relied upon by the Contractor for contract performance on the solicited requirement to an extent that warrants attribution of the affiliate’s past performance to the offeror. While there may be multiple ways to demonstrate meaningful involvement, generally reach back capability to the affiliates or common parent’s resources alone does not establish meaningful involvement. The Agency will not consider an affiliate's record where that record does not bear on the likelihood of successful performance by the offeror. The narrative must also describe in detail, and with specificity, the relationship between the offeror and the affiliate as well as the current status of the affiliate as a going concern. If the offeror purchased or merged with the affiliate, state the date of purchase/ merger and the affiliate’s personnel and resources that were retained by the offeror after the purchase/merger. The Agency will assess the narrative to determine whether, and to what degree, to attribute the affiliate’s past performance to the offeror. This narrative will not count against the stated page size limitation. If the contractor fails to submit a narrative or if the narrative lacks sufficient detail to establish meaningful involvement by the affiliate, the Agency, at its discretion, may decline to consider the past performance of the affiliate in the evaluation.

Notwithstanding, because the meaningful involvement of an affiliate goes to the relevance of the affiliate’s past performance projects to the evaluation, the Agency reserves the right, at its sole discretion, to conduct exchanges with an offeror or offerors, as necessary and appropriate, pursuant to FAR 15.306, concerning its relationship with the affiliate or the affiliates proposed involvement in the solicited requirement.

Note: This section does not apply to any entity identified in the Quote as a teaming partner, subcontractor, joint venture member, etc., in accordance with Past Performance section 1(b).

The roles of such entities must be described in accordance with Note 2 above. Further, Note 1 does not apply to entities described in this section. That is, this section does not increase the number of past performance projects that may be submitted by the offeror. Additionally, where meaningful involvement of the affiliate(s) has not been established, the Agency has no obligation to evaluate the past performance of affiliates, other than the affiliate project(s) submitted as part of the Quote.

PRICE SUBMISSION:

(1) Complete Pricing Schedule. The price submission shall include a total price for all requirements to include labor, supervision, material/equipment, travel, per diem, shipping/freight, training, and warranty as specified within the Statement of Work (SOW).

QUOTATIONS SUBMISSION REQUIREMENTS:

Acknowledge Amendments (if any)

Initial Quotes: Contractors are informed that it is the Government’s desire to make award on initial quotes when deemed possible by the Contracting Officer, however the Government reserves the right to communicate and/or negotiate with offerors if later determined necessary.

Validity of Quote: Quotes shall specify the offer expiration date. Offerors shall hold their offers valid for 90 days after the solicitation closing date, unless requested to further extend it by the Contracting Officer.

Non-Compliance with RFQ Requirements: Failure to meet any of the instructions for submission of Offeror quotations may result in the rejection of the Offeror’s quotation.

Basis for Selection: The Government will select the responsible Contractor whose proposal, in conforming to this RFQ, provides the overall best value to meet the Government's requirements, price and non-price factors considered. Only apparent successful contractors determined to be responsible pursuant to FAR 9.104-1 will be issued a contract.

(End of provision)

FAR 52.204-26 Covered Telecommunications Equipment or Services-Representation (OCT 2020)

(a) Definitions. As used in this provision, "covered telecommunications equipment or services" and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) ( https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(c) (1) Representation. The Offeror represents that it □ does, □ does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it □ does, □ does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

(End of provision).

FAR 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation (Jan 2017) FAR 52.204-7 System for Award Management (Nov 2024) FAR 52.204-22 Alternative Line Item Proposal (Jan 2017) FAR 52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals- Representation (Dec 2016)

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4281

Daniel W. Simms Division of | Revision No.: 33 Director Wage Determinations| Date Of Last Revision: 04/25/2025

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to | |after January 30, 2022, or the |the contract. | |contract is renewed or extended (e.g., |The contractor must pay all covered workers | |an option is exercised) on or after |at least $17.75 per hour (or the applicable | |January 30, 2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2025. | |If the contract was awarded on or |Executive Order 13658 generally applies to | |between January 1, 2015 and January 29,|the contract. | |2022, and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30, |at least $13.30 per hour (or the applicable | |2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2025. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

States: District of Columbia, Maryland, Virginia

Area: District of Columbia Statewide Maryland Counties of Charles, Prince George's Virginia Counties of Alexandria, Arlington, Fairfax, Falls Church, Fauquier, Loudoun, Manassas, Manassas Park, Prince William, Stafford

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 21.83 01012 - Accounting Clerk II 24.50 01013 - Accounting Clerk III 27.41 01020 - Administrative Assistant 39.97 01035 - Court Reporter 29.26 01041 - Customer Service Representative I 17.59*** 01042 - Customer Service Representative II 19.19 01043 - Customer Service Representative III 21.54 01051 - Data Entry Operator I 19.11 01052 - Data Entry Operator II 20.85 01060 - Dispatcher, Motor Vehicle 25.71 01070 - Document Preparation Clerk 21.07 01090 - Duplicating Machine Operator 21.07

7/1/25, 4:13 PM SAM.gov https://sam.gov/wage-determination/2015-4281/33 1/11

01111 - General Clerk I 20.12 01112 - General Clerk II 21.96 01113 - General Clerk III 24.65 01120 - Housing Referral Assistant 26.61 01141 - Messenger Courier 22.01 01191 - Order Clerk I 20.25 01192 - Order Clerk II 22.10 01261 - Personnel Assistant (Employment) I 22.42 01262 - Personnel Assistant (Employment) II 25.08 01263 - Personnel Assistant (Employment) III 27.95 01270 - Production Control Clerk 28.45 01290 - Rental Clerk 21.83 01300 - Scheduler, Maintenance 21.33 01311 - Secretary I 21.33 01312 - Secretary II 23.86 01313 - Secretary III 26.61 01320 - Service Order Dispatcher 22.98 01410 - Supply Technician 39.97 01420 - Survey Worker 22.94 01460 - Switchboard Operator/Receptionist 19.12 01531 - Travel Clerk I 22.65 01532 - Travel Clerk II 24.70 01533 - Travel Clerk III 26.66 01611 - Word Processor I 18.97 01612 - Word Processor II 21.29 01613 - Word Processor III 23.81 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 29.21 05010 - Automotive Electrician 28.76 05040 - Automotive Glass Installer 27.09 05070 - Automotive Worker 27.09 05110 - Mobile Equipment Servicer 23.30 05130 - Motor Equipment Metal Mechanic 30.28 05160 - Motor Equipment Metal Worker 27.09 05190 - Motor Vehicle Mechanic 30.28 05220 - Motor Vehicle Mechanic Helper 21.32 05250 - Motor Vehicle Upholstery Worker 25.28 05280 - Motor Vehicle Wrecker 27.09 05310 - Painter, Automotive 28.76 05340 - Radiator Repair Specialist 27.09 05370 - Tire Repairer 21.12 05400 - Transmission Repair Specialist 30.28 07000 - Food Preparation And Service Occupations 07010 - Baker 17.87 07041 - Cook I 20.40 07042 - Cook II 23.72 07070 - Dishwasher 17.70*** 07130 - Food Service Worker 17.41*** 07210 - Meat Cutter 22.13 07260 - Waiter/Waitress 18.48 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 28.23 09040 - Furniture Handler 15.47*** 09080 - Furniture Refinisher 24.81 09090 - Furniture Refinisher Helper 18.38 09110 - Furniture Repairer, Minor 21.80 09130 - Upholsterer 21.85 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 17.68*** 11060 - Elevator Operator 17.84 11090 - Gardener 25.16 11122 - Housekeeping Aide 17.84 11150 - Janitor 17.84 11210 - Laborer, Grounds Maintenance 19.16 11240 - Maid or Houseman 17.70***

7/1/25, 4:13 PM SAM.gov https://sam.gov/wage-determination/2015-4281/33 2/11

11260 - Pruner 18.28 11270 - Tractor Operator 23.02 11330 - Trail Maintenance Worker 19.16 11360 - Window Cleaner 18.70 12000 - Health Occupations 12010 - Ambulance Driver 24.09 12011 - Breath Alcohol Technician 31.01 12012 - Certified Occupational Therapist Assistant 40.02 12015 - Certified Physical Therapist Assistant 36.67 12020 - Dental Assistant 23.78 12025 - Dental Hygienist 52.41 12030 - EKG Technician 45.58 12035 - Electroneurodiagnostic Technologist 45.58 12040 - Emergency Medical Technician 24.09 12071 - Licensed Practical Nurse I 27.72 12072 - Licensed Practical Nurse II 31.01 12073 - Licensed Practical Nurse III 34.57 12100 - Medical Assistant 22.48 12130 - Medical Laboratory Technician 34.27 12160 - Medical Record Clerk 25.58 12190 - Medical Record Technician 28.61 12195 - Medical Transcriptionist 20.72 12210 - Nuclear Medicine Technologist 49.45 12221 - Nursing Assistant I 15.11*** 12222 - Nursing Assistant II 17.01*** 12223 - Nursing Assistant III 18.56 12224 - Nursing Assistant IV 20.83 12235 - Optical Dispenser 28.14 12236 - Optical Technician 23.50 12250 - Pharmacy Technician 21.90 12280 - Phlebotomist 23.72 12305 - Radiologic Technologist 41.51 12311 - Registered Nurse I 31.84 12312 - Registered Nurse II 38.95 12313 - Registered Nurse II, Specialist 38.95 12314 - Registered Nurse III 47.12 12315 - Registered Nurse III, Anesthetist 47.12 12316 - Registered Nurse IV 56.48 12317 - Scheduler (Drug and Alcohol Testing) 38.42 12320 - Substance Abuse Treatment Counselor 30.37 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 24.30 13012 - Exhibits Specialist II 30.10 13013 - Exhibits Specialist III 36.82 13041 - Illustrator I 25.90 13042 - Illustrator II 32.08 13043 - Illustrator III 39.23 13047 - Librarian 43.76 13050 - Library Aide/Clerk 21.22 13054 - Library Information Technology Systems 39.51 Administrator 13058 - Library Technician 24.49 13061 - Media Specialist I 28.52 13062 - Media Specialist II 31.90 13063 - Media Specialist III 35.55 13071 - Photographer I 24.22 13072 - Photographer II 27.09 13073 - Photographer III 33.55 13074 - Photographer IV 41.04 13075 - Photographer V 49.65 13090 - Technical Order Library Clerk 26.65 13110 - Video Teleconference Technician 30.84 14000 - Information Technology Occupations 14041 - Computer Operator I 27.25 14042 - Computer Operator II 30.48

7/1/25, 4:13 PM SAM.gov https://sam.gov/wage-determination/2015-4281/33 3/11

14043 - Computer Operator III 33.99 14044 - Computer Operator IV 37.76 14045 - Computer Operator V 41.82 14071 - Computer Programmer I (see 1) 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 27.25 14160 - Personal Computer Support Technician 37.76 14170 - System Support Specialist 41.82 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 41.82 15020 - Aircrew Training Devices Instructor (Rated) 50.59 15030 - Air Crew Training Devices Instructor (Pilot) 60.66 15050 - Computer Based Training Specialist / Instructor 41.82 15060 - Educational Technologist 48.91 15070 - Flight Instructor (Pilot) 60.66 15080 - Graphic Artist 39.60 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 60.66 15086 - Maintenance Test Pilot, Rotary Wing 60.66 15088 - Non-Maintenance Test/Co-Pilot 60.66 15090 - Technical Instructor 32.56 15095 - Technical Instructor/Course Developer 39.83 15110 - Test Proctor 26.28 15120 - Tutor 26.28 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 20.03 16030 - Counter Attendant 20.03 16040 - Dry Cleaner 22.90 16070 - Finisher, Flatwork, Machine 20.03 16090 - Presser, Hand 20.03 16110 - Presser, Machine, Drycleaning 20.03 16130 - Presser, Machine, Shirts 20.03 16160 - Presser, Machine, Wearing Apparel, Laundry 20.03 16190 - Sewing Machine Operator 23.86 16220 - Tailor 24.82 16250 - Washer, Machine 20.99 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 31.46 19040 - Tool And Die Maker 38.21 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 24.07 21030 - Material Coordinator 28.45 21040 - Material Expediter 28.45 21050 - Material Handling Laborer 19.81 21071 - Order Filler 18.01 21080 - Production Line Worker (Food Processing) 24.07 21110 - Shipping Packer 21.99 21130 - Shipping/Receiving Clerk 21.99 21140 - Store Worker I 19.08 21150 - Stock Clerk 22.91 21210 - Tools And Parts Attendant 24.07 21410 - Warehouse Specialist 24.07 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 46.69 23019 - Aircraft Logs and Records Technician 37.02 23021 - Aircraft Mechanic I 44.33 23022 - Aircraft Mechanic II 46.69 23023 - Aircraft Mechanic III 48.97 23040 - Aircraft Mechanic Helper 31.21 23050 - Aircraft, Painter 42.10 23060 - Aircraft Servicer 37.02

7/1/25, 4:13 PM SAM.gov https://sam.gov/wage-determination/2015-4281/33 4/11

23070 - Aircraft Survival Flight Equipment Technician 42.10 23080 - Aircraft Worker 39.66 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 39.66 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 44.33

II

23110 - Appliance Mechanic 27.81 23120 - Bicycle Repairer 20.03 23125 - Cable Splicer 43.10 23130 - Carpenter, Maintenance 28.58 23140 - Carpet Layer 24.79 23160 - Electrician, Maintenance 36.28 23181 - Electronics Technician Maintenance I 35.18 23182 - Electronics Technician Maintenance II 37.35 23183 - Electronics Technician Maintenance III 39.32 23260 - Fabric Worker 29.06 23290 - Fire Alarm System Mechanic 31.36 23310 - Fire Extinguisher Repairer 26.78 23311 - Fuel Distribution System Mechanic 37.07 23312 - Fuel Distribution System Operator 28.53 23370 - General Maintenance Worker 26.68 23380 - Ground Support Equipment Mechanic 44.33 23381 - Ground Support Equipment Servicer 37.02 23382 - Ground Support Equipment Worker 39.66 23391 - Gunsmith I 26.78 23392 - Gunsmith II 31.14 23393 - Gunsmith III 34.80 23410 - Heating, Ventilation And Air-Conditioning 34.66 Mechanic 23411 - Heating, Ventilation And Air Contidioning 36.51 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 34.05 23440 - Heavy Equipment Operator 29.25 23460 - Instrument Mechanic 37.03 23465 - Laboratory/Shelter Mechanic 33.05 23470 - Laborer 19.81 23510 - Locksmith 35.47 23530 - Machinery Maintenance Mechanic 33.73 23550 - Machinist, Maintenance 34.32 23580 - Maintenance Trades Helper 20.27 23591 - Metrology Technician I 37.03 23592 - Metrology Technician II 39.00 23593 - Metrology Technician III 40.91 23640 - Millwright 29.89 23710 - Office Appliance Repairer 24.28 23760 - Painter, Maintenance 24.00 23790 - Pipefitter, Maintenance 33.08 23810 - Plumber, Maintenance 31.42 23820 - Pneudraulic Systems Mechanic 34.80 23850 - Rigger 34.16 23870 - Scale Mechanic 31.14 23890 - Sheet-Metal Worker, Maintenance 30.59 23910 - Small Engine Mechanic 24.40 23931 - Telecommunications Mechanic I 37.06 23932 - Telecommunications Mechanic II 39.03 23950 - Telephone Lineman 45.15 23960 - Welder, Combination, Maintenance 28.87 23965 - Well Driller 32.07 23970 - Woodcraft Worker 34.80 23980 - Woodworker 26.78 24000 - Personal Needs Occupations 24550 - Case Manager 23.07 24570 - Child Care Attendant 17.20*** 24580 - Child Care Center Clerk 21.46 24610 - Chore Aide 17.91

7/1/25, 4:13 PM SAM.gov https://sam.gov/wage-determination/2015-4281/33 5/11

24620 - Family Readiness And Support Services 23.07 Coordinator 24630 - Homemaker 23.07 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 42.88 25040 - Sewage Plant Operator 32.51 25070 - Stationary Engineer 42.88 25190 - Ventilation Equipment Tender 30.19 25210 - Water Treatment Plant Operator 32.51 27000 - Protective Service Occupations 27004 - Alarm Monitor 29.26 27007 - Baggage Inspector 20.31 27008 - Corrections Officer 33.19 27010 - Court Security Officer 32.91 27030 - Detection Dog Handler 22.72 27040 - Detention Officer 33.19 27070 - Firefighter 32.62 27101 - Guard I 20.31 27102 - Guard II 22.72 27131 - Police Officer I 36.09 27132 - Police Officer II 40.11 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 21.74 28042 - Carnival Equipment Repairer 23.76 28043 - Carnival Worker 17.22*** 28210 - Gate Attendant/Gate Tender 21.78 28310 - Lifeguard 16.92*** 28350 - Park Attendant (Aide) 24.36 28510 - Recreation Aide/Health Facility Attendant 17.78 28515 - Recreation Specialist 30.17 28630 - Sports Official 19.40 28690 - Swimming Pool Operator 27.63 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 35.81 29020 - Hatch Tender 35.81 29030 - Line Handler 35.81 29041 - Stevedore I 33.42 29042 - Stevedore II 38.01 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 52.72 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 36.35 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 40.04 30021 - Archeological Technician I 24.14 30022 - Archeological Technician II 27.00 30023 - Archeological Technician III 33.44 30030 - Cartographic Technician 33.44 30040 - Civil Engineering Technician 41.58 30051 - Cryogenic Technician I 37.04 30052 - Cryogenic Technician II 40.90 30061 - Drafter/CAD Operator I 24.14 30062 - Drafter/CAD Operator II 27.00 30063 - Drafter/CAD Operator III 30.09 30064 - Drafter/CAD Operator IV 37.04 30081 - Engineering Technician I 22.92 30082 - Engineering Technician II 25.72 30083 - Engineering Technician III 28.79 30084 - Engineering Technician IV 35.64 30085 - Engineering Technician V 43.61 30086 - Engineering Technician VI 52.76 30090 - Environmental Technician 31.79 30095 - Evidence Control Specialist 33.44 30210 - Laboratory Technician 29.01 30221 - Latent Fingerprint Technician I 37.63 30222 - Latent Fingerprint Technician II 41.56 30240 - Mathematical Technician 42.36

7/1/25, 4:13 PM SAM.gov https://sam.gov/wage-determination/2015-4281/33 6/11

30361 - Paralegal/Legal Assistant I 25.58 30362 - Paralegal/Legal Assistant II 31.69 30363 - Paralegal/Legal Assistant III 38.77 30364 - Paralegal/Legal Assistant IV 46.90 30375 - Petroleum Supply Specialist 40.90 30390 - Photo-Optics Technician 33.44 30395 - Radiation Control Technician 40.90 30461 - Technical Writer I 31.78 30462 - Technical Writer II 38.87 30463 - Technical Writer III 47.03 30491 - Unexploded Ordnance (UXO) Technician I 33.50 30492 - Unexploded Ordnance (UXO) Technician II 40.54 30493 - Unexploded Ordnance (UXO) Technician III 48.59 30494 - Unexploded (UXO) Safety Escort 33.50 30495 - Unexploded (UXO) Sweep Personnel 33.50 30501 - Weather Forecaster I 37.04 30502 - Weather Forecaster II 45.05 30620 - Weather Observer, Combined Upper Air Or (see 2) 30.09 Surface Programs 30621 - Weather Observer, Senior (see 2) 33.44 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 40.54 31020 - Bus Aide 20.16 31030 - Bus Driver 28.94 31043 - Driver Courier 21.14 31260 - Parking and Lot Attendant 17.17*** 31290 - Shuttle Bus Driver 21.06 31310 - Taxi Driver 17.71*** 31361 - Truckdriver, Light 23.10 31362 - Truckdriver, Medium 25.07 31363 - Truckdriver, Heavy 28.39 31364 - Truckdriver, Tractor-Trailer 28.39 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 19.76 99030 - Cashier 16.73*** 99050 - Desk Clerk 17.76 99095 - Embalmer 34.10 99130 - Flight Follower 33.50 99251 - Laboratory Animal Caretaker I 20.32 99252 - Laboratory Animal Caretaker II 22.20 99260 - Marketing Analyst 40.69 99310 - Mortician 34.10 99410 - Pest Controller 21.91 99510 - Photofinishing Worker 22.57 99710 - Recycling Laborer 23.14 99711 - Recycling Specialist 28.16 99730 - Refuse Collector 22.08 99810 - Sales Clerk 17.18*** 99820 - School Crossing Guard 20.44 99830 - Survey Party Chief 31.00 99831 - Surveying Aide 19.26 99832 - Surveying Technician 29.45 99840 - Vending Machine Attendant 17.68*** 99841 - Vending Machine Repairer 22.47 99842 - Vending Machine Repairer Helper 17.68***

***Workers in this…