7-03 Form 2- Cost Sheet.xlsx

This is a Cost Sheet form for print shop equipment procurement by the Texas Workforce Commission (TWC). The document outlines two primary equipment line items with associated components and services. Line Item 1.0 specifies an Ultra High Speed Automatic Punch with detailed technical specifications including sheet size parameters (maximum 350p x 330mm, minimum 138p x 138mm), punching speeds of 70, 80, or 90 cycles per minute, adjustable sheet pickup from 0.5mm to 1mm, dual voltage capability (220-240v/50Hz or 110v/60Hz), and reference brands such as James Burn EX610 and JBi Alpha-Doc MK4. This line item also includes pricing cells for interchangeable die options (Oval Hole Die and 3-Hole Punch Die), equipment maintenance and service contract, and equipment setup and training. Line Item 2.0 specifies a Hydraulic Three Spindle Paper Drill with Auto-Trip Side Guide featuring three drill heads, multiple drill size capacities (1/8" to 1/2" and 1/4" to 1/2"), adjustable ranges between drills and outside drills, maximum drilling capacity of 2.5 inches, adjustable stroke speeds up to 18 strokes per minute, and specific electrical requirements (1 Phase, 60Hz AC with 1/2 HP pump and 1HP spindle motor at 208 or 230 volts). The Challenge EH-3 is referenced as the comparable brand for this equipment.

Bidders are required to input firm-fixed pricing in US dollars only in the highlighted cells designated on the cost sheet. All pricing must be inclusive of all costs associated with providing the print shop equipment during the contract term, including delivery, installation, maintenance, and training services. The cost sheet format requires separate line-item pricing for each equipment component, die option, maintenance contract, and setup service, with a total cost proposal calculated in US dollars for the complete Print Shop Equipment procurement.