6991PE25Q000007 Amendment 3 Bidder questions.pdf
PDF 85 KB Posted
- Solicitation number
- 6991PE25Q000007
About this file
This document is an Amendment 3 Questions and Answers document for solicitation 6991PE25Q000007 for an SBRF Landing Platform. The Q&A addresses two specific technical clarifications: 1) A correction to the Bill of Materials (BOM) on sheet 4, where items 28 and 29 should read "FP ¼"x6"x4"" instead of the previously listed dimensions, and 2) A hardware specification clarification for 4" duramax fenders, specifying that the hardware consists of ½" UNC nuts and washers for studs welded to the channel, with a note correction from 5/8" to ½" UNC on sheet 1.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
6991PE25Q000007, SBRF Landing Platform Amendment 3, Questions and Answers
Q1. On sheet 4, it is unclear whether items 28 and 29 refer to the angles indicated in that portion of the drawing, or to the formed plate listed in the material cut list. Could you please clarify which material is intended for these items?
A1. The description in the BOM on sheet 4 is incorrect on items 28 and 29. It should read FP ¼”x6”x4” as it does on sheet 3, Front View. Not sure where the 24” came from.
Q2. I don't see where the hardware for the 4" duramax fenders is called out.
A2. The hardware is ½” unc nuts and washers for the studs welded to the channel. Note 7 on sheet 1 indicates the hardware, but the callout should say ½” UNC, not 5/8”
File details come from the government source that posted it. Updated .