6973GH-26-R-00228.pdf
PDF 445 KB Posted
- Solicitation number
- 6973GH-26-R-00228
About this file
This is a Screening Information Request (SIR) for a Firm Fixed Price, Indefinite Delivery Requirements contract for Beechcraft King Air 250 non-type-rated pilot training services.
The FAA Aeronautical Center seeks contractor services to provide initial and recurrent training with Pro Line Fusion avionics to FAA pilots and inspectors. The contract covers a base year (11/02/2026–11/01/2027) plus four optional one-year periods. Offerors must propose pricing for three contract line items (CLINs) per performance period: CLIN 0001/0004/0007/0010/0013 for initial training (10 students per year at specified ground school and simulator hours), CLIN 0002/0005/0008/0011/0014 for recurrent training (24 students per year including FAR 61.58 proficiency checks and aircraft flight hours), and CLIN 0003/0006/0009/0012/0015 for supplementary training (hourly rates for ground school and simulator). Offerors must identify the principal place of performance (city and state) where ground training will occur and furnish all necessary transportation for students if training occurs at multiple locations. Training must meet FAA formal flight training course requirements and exact dates require mutual agreement between parties, with rescheduling accommodated for equipment malfunction, weather, or instructor unavailability.
Award will be made to the lowest-price technically acceptable offer based on five equally weighted evaluation factors: evidence of FAA-approved training programs (14 CFR Part 121, 135, 141, or 142), proof of aircraft and full flight simulator ownership, description of available training aids and facilities meeting PWS requirements, proposed ground and flight training hours meeting minimum requirements, and proposed number of training days to complete all training and testing. The Government reserves the right to award without discussions. Offers must be submitted electronically to Shelley.A.Howard@faa.gov by the deadline specified in Block 8. The Government anticipates adequate price competition and may request cost substantiation only if competition does not materialize. Contractor must have an approved purchasing system, maintain FAA records according to federal regulations, and comply with all representations and certifications in the System for Award Management (SAM). Payment will be made per completed student at fixed rates upon submission of proper invoices including certificates of training and detailed line-item documentation via the Delphi eInvoicing portal.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PWS - Beechcraft King Air 250 Non-Type-Rated With Pro Line Fusion 6.10.2026.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SEC.
14A. NAME
AND
ADDRESS
OF
OFFEROR
SOLICITATION, OFFER AND AWARD PAGE
1. CONTRACT NO. 2. SOLICITATION NUMBER 3. SOLICITATION TYPE 4. DATE ISSUED 5. REQUISITION/PURCHASE NUMBER
CODE6. ISSUED BY 7. ADDRESS OFFER TO (If other than Item 6)
NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder"
SOLICITATION
8. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 7, or if hand carried, in the depository located in until local time
CAUTION: LATE Submissions, Modifications and Withdrawals. All offers are subject to all terms and conditions contained in this solicitation.
9. FOR
INFORMATION
CALL
A. NAME B. TELEPHONE (NO COLLECT CALLS)
AREA CODE NUMBER EXT.
C. E-MAIL ADDRESS
10. TABLE OF CONTENTS
(X) DESCRIPTION PAGE(S) (X) SEC. PAGE(S)DESCRIPTION
A B
C D E F G H
I
J
K
L
M EVALUATION FACTORS FOR AWARD
INSTR., CONDS., AND NOTICES TO OFFERORS
REPRESENTATIONS, CERTIFICATIONS AND OTHER
STATEMENTS OF OFFERORS
PART IV - REPRESENTATIONS AND INSTRUCTIONS
LIST OF ATTACHMENTS
PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.
CONTRACT CLAUSESSOLICITATION/CONTRACT FORM
SUPPLIES OR SERVICES AND PRICE/COST
DESCRIPTION/SPECS./WORK STATEMENT
PACKAGING AND MARKING
INSPECTION AND ACCEPTANCE
DELIVERIES OR PERFORMANCE
CONTRACT ADMINISTRATION DATA
SPECIAL CONTRACT REQUIREMENTS
NOTE: Item 11 does not apply if the solicitation includes Minimum Bid Acceptance Period.
OFFER (Must be fully completed by offeror)
11. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.
12. DISCOUNT FOR PROMPT PAYMENT
13. ACKNOWLEDGEMENT OF AMENDMENTS
(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):
10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) CALENDAR DAYS (%)
DATEAMENDMENT NO.AMENDMENT NO. DATE
CODE FACILITY 15. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER
(Type or print)
AREA CODE NUMBER EXT.
14C. CHECK IF REMITTANCE ADDRESS IS
DIFFERENT FROM ABOVE - ENTER
SUCH ADDRESS IN SCHEDULE.
16. SIGNATURE 17. OFFER DATE
AWARD (To be completed by CONTRACT AUTHORITY)
18. ACCEPTED AS TO ITEMS NUMBERED 19. AMOUNT 20. ACCOUNTING AND APPROPRIATION
21. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:
23. ADMINISTERED BY (If other than Item 6) CODE
25. NAME OF CONTRACTING OFFICER (Type or print)
IMPORTANT - Award will be made on this Form, or by other authorized official written notice.
22. SUBMIT INVOICES TO ADDRESS SHOWN IN
(4 copies unless otherwise specified)
24. PAYMENT WILL BE MADE BY
26. CONTRACT AUTHORITY
(Signature of Contracting Officer)
27. AWARD DATE
CODE
ITEM
SEALED BID (IFB)
NEGOTIATED BID (RFP)
(Hour) (Date)
PART I - THE SCHEDULE PART II - CONTRACT CLAUSES
14B. TELEPHONE NUMBER
OF PAGES
AC-26-03626
6973GH-26-R-00228
Shelley.A.Howard@faa.gov
Shelley A. Howard
AAQ-740 TRAINING & AVIATION ACQ
FAA AERONAUTICAL CENTER
PO BOX 25082
BLDG 014-AHQ, ROOM 233A
OKLAHOMA CITY OK 73125
AAQ740-AFN
1700 CT
Shelley A. Howard
405 954-7883
1 57
CONTINUATION SHEET
REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES
NAME OF OFFEROR OR CONTRACTOR
SUPPLIES/SERVICES
(B)
UNIT
(D)
UNIT PRICE
(E)
AMOUNT
(F)
OPTIONAL FORM 336 (4-86)
Sponsored by GSA FAR (48 CFR) 53.110
ITEM NO.
(A)
QUANTITY
(C)
NSN 7540-01-152-8067
6973GH-26-R-00228
Period of Performance: 11/02/2026 to
11/01/2031
00001 The Line Item listed on this SF30 is for
Government Use Only. Please reference Section
B Pricing for the contract Line Items.
Section B - Supplies or Services/Prices Section B - Schedule
Base Year Per Student Unit Price Total 11/02/2026 - 11/01/2027
CLIN 0001
Beechcraft King Air 250 10 ____________ __________ Non-Type w/Pro Line Fusion Qualification Initial Training FAA21800168
a. Ground School hours:
b. Level "C" Simulator or better hours:
(including 100% practical test)
Proposed # of training days expected to complete all training and testing: ______
CLIN 0002
Beechcraft King Air 250 24 ____________ __________ Non-Type w/Pro Line Fusion Qualification Recurrent Training FAA21800169
a. Ground School hours:
b. Level "C" Simulator or better hours:
(IncludingFAR61.58 proficiency check)
c. Aircraft Flight hours:
Proposed # of training days expected to complete all training and testing: ______
CLIN 0003
Beechcraft King Air 250 Supplementary Training
a. Ground School - cost per hour:
b. Simulator - cost per hour:
Total for Base Year _____________________
Option Year One 11/02/2027 - 11/01/2028
CLIN 0004
Beechcraft King Air 250 10 ____________ __________ Non-Type w/Pro Line Fusion Qualification Initial Training FAA21800168
a. Ground School hours:
b. Level "C" Simulator or better hours:
(including 100% practical test)
Proposed # of training days expected to complete all training and testing: ______
CLIN 0005
Beechcraft King Air 250 24 ____________ __________ Non-Type w/Pro Line Fusion Qualification Recurrent Training FAA21800169
a. Ground School hours:
b. Level "C" Simulator or better hours:
(IncludingFAR61.58 proficiency check)
c. Aircraft Flight hours:
Proposed # of training days expected to complete all training and testing: ______
CLIN 0006
Beechcraft King Air 250 Supplementary Training
a. Ground School - cost per hour:
Total for Option Year One_____________________
Option Year Two 11/02/2028 - 11/01/2029
CLIN 0007
Beechcraft King Air 250 10 ____________ __________ Non-Type w/Pro Line Fusion Qualification Initial Training FAA21800168
a. Ground School hours:
b. Level "C" Simulator or better hours:
(including 100% practical test)
Proposed # of training days expected to complete all training and testing: ______
CLIN 0008
Beechcraft King Air 250 24 ____________ __________ Non-Type w/Pro Line Fusion Qualification Recurrent Training FAA21800169
a. Ground School hours:
b. Level "C" Simulator or better hours:
(IncludingFAR61.58 proficiency check)
c. Aircraft Flight hours:
Proposed # of training days expected to complete all training and testing: ______
CLIN 0009
Beechcraft King Air 250 Supplementary Training
a. Ground School - cost per hour:
Total for Option Year Two_____________________
Option Year Three 11/02/2029 - 11/01/2030
CLIN 0010
Beechcraft King Air 250 10 ____________ __________ Non-Type w/Pro Line Fusion Qualification Initial Training FAA21800168
a. Ground School hours:
b. Level "C" Simulator or better hours:
(including 100% practical test)
Proposed # of training days expected to complete all training and testing: ______
CLIN 0011
Beechcraft King Air 250 24 ____________ __________ Non-Type w/Pro Line Fusion Qualification Recurrent Training FAA21800169
a. Ground School hours:
b. Level "C" Simulator or better hours:
(IncludingFAR61.58 proficiency check)
c. Aircraft Flight hours:
Proposed # of training days expected to complete all training and testing: ______
CLIN 0012
Beechcraft King Air 250 Supplementary Training
a. Ground School - cost per hour:
Total for Option Year Three_____________________
Option Year Four 11/02/2030 - 11/01/2031
CLIN 0013
Beechcraft King Air 250 10 ____________ __________ Non-Type w/Pro Line Fusion Qualification Initial Training FAA21800168
a. Ground School hours:
b. Level "C" Simulator or better hours:
(including 100% practical test)
Proposed # of training days expected to complete all training and testing: ______
CLIN 0014
Beechcraft King Air 250 24 ____________ __________ Non-Type w/Pro Line Fusion Qualification Recurrent Training FAA21800169
a. Ground School hours:
b. Level "C" Simulator or better hours:
(IncludingFAR61.58 proficiency check)
c. Aircraft Flight hours:
Proposed # of training days expected to complete all training and testing: ______
CLIN 0015
Beechcraft King Air 250 Supplementary Training
a. Ground School - cost per hour:
Total for Option Year Four _____________________
TOTAL ______________________
*Note: This is a Firm Fixed Price, Indefinite Delivery Requirements type contract. The precise quantities of services, and support required is unknown and will be ordered on an as-needed basis with the issuance of Task Orders. Task Orders will be issued with Not-to-Exceed line item(s). Prices are pre-established with Section B Unit Prices. Estimated requirements are not a representation to an offeror or contractor that the estimated quantity will be ordered, or that conditions affecting requirements will be stable or normal.
Clause List
The remainder of this page has been intentionally left blank.
Section C - Description/Specifications Scope of Work
The contractor is to provide non-type-rated initial and recurrent with Pro Line Fusion training to include ground school and flight training to FAA pilots/inspectors in the Beechcraft King Air 250 aircraft. Student quotas for these courses are assigned by the Workforce Development Division, AFB-500 or Aircraft Certification Service – Planning and Program Division (AIR). The courses covered under this contract will meet the requirements for FAA formal flight training. FAA formal flight training consists of training courses with agency-level course numbers that will be officially recorded in the employee’s personnel records.
Exact training dates will be a mutual agreement of both parties. In the event of conflict, such as equipment malfunction, weather, unavailability of FAA pilots or aircraft, training dates will be rescheduled to other mutually agreeable dates. The contractor shall start the training described in the contract, on the mutually agreed to training dates, but only after receipt of either an oral or written notice from the Contracting Officer that the requirement still exists and funds have been officially obligated on a task order
See Section J attachment 1 (Performance Work Statement) for additional information.
Section D - Packaging and Marking
Section E - Inspection and Acceptance Clause List
3.10.4-4 INSPECTION OF SERVICES - BOTH FIXED-PRICE & COST REIMBURSEMENT (APR
1996)
AC1908 INSPECTION AND ACCEPTANCE AT DESTINATION (JUN 2015)
(a) Final inspection and acceptance shall be at destination.
(b) Although source inspection by the Government is not anticipated under this contract, the provisions of this clause shall in no way be construed to limit the rights of the Government under the clause entitled 3.10.4-4
INSPECTION OF SERVICES - BOTH FIXED - PRICE & COST REIMBURSEMENT (1996)
Section F - Deliveries or Performance
3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2019)
This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:https://fast.faa.gov/contractclauses.cfm.
(End of clause)
3.10.1-9 STOP-WORK ORDER (APR 2025)
3.10.1-24 NOTICE OF DELAY (MAR 2009)
AC0168 AUTHORIZED PERFORMANCE (JUL 2015)
The execution of a contract shall not constitute authority for the contractor to commence performance. Performance shall be ordered by the issuance of a formal delivery order by an authorized Contracting Officer of the Mike Monroney Aeronautical Center. Orders issued orally or by written telecommunications shall reference a formal delivery order number and shall be confirmed by issuance of the formal delivery order.
AC0180 PRINCIPAL PLACE OF TRAINING (JAN 1997)
The contractor shall enter below the principal place of performance where ground training will be conducted. In the event the Beechcraft King Air 250 Non-Type Rated Training is conducted at a location other than where the ground school is located, the contractor shall furnish all necessary transportation to these location(s). If air transportation is arranged by the contractor, such transportation shall consist of a confirmed reservation in 'coach' class as a minimum for each student.
Beechcraft King Air 250 (City and State) _____________________________________
AC1604 CONTRACT PERIOD (JUN 2015)
The effective period of this contract is 1 year from the date of contract award, plus four 12-month option periods.
https://fast.faa.gov/contractclauses.cfm
Section G - Contract Administration Data Clause List
G.1 ACCOUNTING AND APPROPRIATIO DATA
Accounting and Appropriation data will be set forth on individual task orders issued hereunder.
G.2 CORRESPONDENCE PROCEDURES
(a) To promote timely and effective administration, correspondence submitted under this contract (except for invoices and reports) shall be subjected to the following procedures:
(1) Correspondence Preparation. All correspondence shall contain a subject line commencing with the contract number.
(2) Technical correspondence of a routine nature shall be addressed to the designated COR with an information copy of the correspondence sent to the CO.
(3) Other correspondence, including technical correspondence where patent or technical data issues (if any) are involved, or correspondence which proposes or otherwise involves waivers, deviations, or modifications to the contract requirements, terms and conditions, etc. shall be addressed to the CO with an information copy of correspondence sent to the COR.
(b) Invoices shall be submitted in accordance with Clause 3.3.1-40.
G.3 FAA CONTRACTING OFFICER'S (CO) AUTHORITY
(a) The FAA CO assigned to this contract has responsibility for ensuring the performance of all necessary actions for effective contracting: ensuring compliance with the terms and conditions of the contract and safeguarding the interests of the United States in its contractual relationships. In this regard, the CO is the only individual who has the authority to enter into administer or terminate this contract. In addition, the CO is the only person authorized to approve changes to any of the requirements under this contract, and notwithstanding any provision contained elsewhere in this contract, this authority remains solely with the CO.
(b) It is the responsibility of the contractor to contract the CO immediately if there is even the appearance of any technical direction that is or may be outside the scope of the contract. Work not ordered by the CO and/or work outside the scope of the contract shall not be reimbursed by the Government.
(c) The contractor shall immediately notify the CO for clarification when a question arises regarding the authority of any person to act for the CO under this contract.
3.10.1-22 CONTRACTING OFFICER'S REPRESENTATIVE (APR 2012)
AC0116 OPTION TO EXTEND SERVICES (JUN 2015)
The Government may unilaterally exercise its option to extend the term of the contract for performance of specified services pursuant to Section I, AMS Clause 3.2.4-34, Option to Extend Services , by written notice to the contractor not later than the expiration date of the current contract period.
AC2604 INCREMENTAL FUNDING (JAN 1997)
(a) The Government reserves the right to incrementally fund this contract on a periodic basis to promote efficiency in the utilization of fiscal allotments through the routine budget process or the use of interim funding measures such as under congressional ""continuing resolution"" procedures.
(b) Delivery orders will be periodically issued to provide a not-to-exceed amount of funds. Such amount will be sufficient to cover contract performance for the period specified in the order, plus an estimated cost for terminating the contract should additional funds not be available to continue performance under the contract.
(c) This clause becomes inoperative when the contract period is fully funded.
AC2912 INVOICING PROCEDURES - GENERAL (JAN 2023)
(a) In addition to the requirements set forth at AMS 3.3.1-17, Prompt Payment, for the submission of a proper invoice, the contractor shall submit the following documentation as part of each invoice:
(1) a 'Certificate of Training' is required for each student showing the student has completed the training.
(2) appendix A
(3) detailed invoice(s) for training provided, depicting:
(i) student name(s)
(ii) contract number and applicable delivery order number,
(iii) noun description of services and/or supplies, including applicable line item number(s) and quantity(s) that were provided,
(iv) extended totals for invoiced quantities.
(b) Payment to the contractor for completed training shall be limited to and computed upon the per-student fixed rate set out in the Section B Schedule(s). Fractions of hourly performance shall be prorated in accordance with the contractor's standard accounting procedures for abbreviated or supplemental training. Payment for flight hours shall be computed upon aircraft ‘Flight Time,’ as defined in the clause entitled ‘Definitions.’
(c) Certificate of Training, Appendix A and invoice should be uploaded to the eInvoicing Portal IAW clause 3.3.1-
40, ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (APR 2022)
Section H - Special Contract Requirements
FAA shall comply with all Presidential directives. If any clause, provision, term, or condition in this SIR or contract is inconsistent with any Executive Order or Presidential Memoranda issued on or after January 20, 2025, or implementing guidance thereof, FAA will take action it deems appropriate and as permitted by law to correct any such inconsistency to include finding a provision or clause invalid. Applicable Executive Orders include, but are not limited to:
Executive Order 14148 of January 20, 2025, Initial Recissions of Harmful Executive Orders and Actions.
Executive Order 14151 of January 20, 2025, Ending Radical and Wasteful Government DEI Programs and Preferencing.
Executive Order 14154 of January 20, 2025, Unleashing American Energy.
Executive Order 14168 of January 20, 2025, Defending Women From Gender Ideology Extremism and Restoring Biological Truth to the Federal Government Executive Order 14173 of January 21, 2025, Ending Illegal Discrimination and Restoring Merit-Based Opportunity.
3.2.5-7 DISCLOSURE REGARDING PAYMENTS TO INFLUENCE CERTAIN FEDERAL
TRANSACTIONS (OCT 2024)
3.1.9-1 ELECTRONIC COMMERCE AND SIGNATURE (JUL 2020)
(a) The Electronic Signatures in Global and National Commerce Act (E-SIGN) establishes a legal equivalence between:
(1) Contracts written on paper and contracts in electronic form;
(2) Pen-and-ink signatures and electronic signatures; and
(3) Other legally-required written records and the same information in electronic form.
(b) With the submission of an offer, the offeror acknowledges and accepts the utilization of electronic commerce as part of the requirements of this solicitation and the resultant contract.
(c) Certain documents may need to be provided or maintained in original form, such as large-scale drawings impractical to convert to electronic format or a document with a raised seal signifying authenticity. This clause does not change or affect any other requirements that a document must be in paper format to satisfy legal requirements such as for certain real estate transactions.
(d) The use of electronic signature technology is authorized under this solicitation and the resulting contract.
(e) Contractors must not digitally sign any documents with software that uses the Secure Hash Algorithm 1 (SHA- 1). All digitally signed documents and contracts sent to the FAA must use a SHA-256 or higher hash algorithm. This is based on the National Institute of Standards and Technology (NIST) Policy Statement on Hash Functions dated August 5, 2015. Further guidance on the use of SHA-256 is in NIST Special Publication (SP) 800-57 Part 1, section
5.6.2 as amended and SP 800-131A, Revision 1 dated November 6, 2015. Additional guidance on the use of SHA-3 is in NIST SP 800-185 as amended.
(f) Contractors do not have to update documents previously digitally signed using SHA-1 hash algorithms unless the document requires updating. The FAA and contractors may continue to use SHA-1 for the following applications:
Verifying old digital signatures and time stamps, generating and verifying hash-based message authentication codes (HMACs), key derivation functions (KDFs), and random bit/number generation.
(End of Clause)
3.8.2-17 KEY PERSONNEL AND FACILITIES (JUL 2019)
(a) The personnel and/or facilities as specified below are considered essential to the work being performed hereunder and may, with the consent of the contracting parties, be changed from time to time during the course of the contract.
(b) Prior to removing, replacing, or diverting any of the specified personnel and/or facilities, the Contractor must notify in writing, and receive consent from, the Contracting Officer reasonably in advance of the action and must submit justification (including proposed substitutions) in sufficient detail to permit evaluation of the impact on this contract.
(c) No diversion will be made by the Contractor without the written consent of the Contracting Officer.
(d) The key personnel and/or facilities under this contract are:
(List key personnel and/or facilities)
(End of clause)
AC0148 NOTIFICATION OF ABSENCE, ILLNESS, INJURY, OR DEATH OF FAA STUDENTS
(JUL 2015)
Procedures for communicating student absences, serious illness, injuries, or death to an FAA student shall be as follows:
(a) In the event that an FAA student has been scheduled for training and does not arrive to begin training by noon local time, the contractor shall immediately notify the designated Training Coordinator's (TC) office.
(b) In the event an FAA student is absent from class for any reason and has not notified the instructor in charge, the contractor shall immediately notify the TC's office.
(c) Whenever a student becomes ill or is injured, the contractor shall immediately notify the TC's office.
(d) In the case of the death of a student, the contractor shall contact immediately the student's home duty office and the TC's office.
AC4555 NOTICE OF CONTRACTOR TESTIMONY (SEP 2006)
(a) The contractor shall notify the Contracting Officer promptly in writing of its intention, or the intention of its employees, subcontractors of any tier, or subcontractor employees, either voluntarily or under compulsion of competent authority, to provide sworn testimony on any matter related to or arising under the work required by and/or performed under, this contract. Such written notification at a minimum shall consist of the date and time of the testimony, identification of the court, board, or other body before which the testimony is made, the nature of the testimony to be given to the extent it is known at the time of this report, the nature of the contractor’s involvement in the proceeding and any other circumstances related to the work performed under or related to the contract and the proceeding in which the testimony will be taken.
(b) The contractor shall include the substance of this clause, including this paragraph (b), in all subcontracts executed under this contract and shall require all subcontractors to provide the required report to the contractor.
AC4557 STRIKES OR PICKETING
Notwithstanding any other provision hereof, the Contractor is responsible for delays arising out of labor disputes, including but not limited to strikes, if such strikes are reasonably avoidable. A delay caused by a strike or by picketing which constitutes an unfair labor practice is not excusable unless the Contractor takes all reasonable and appropriate action to end such a strike or picketing, such as the filing of a charge with the National Labor Relations Board, the use of other available Government procedures, and the use of private boards or organizations for the settlement of disputes.
Section I - Contract Clauses Clause List
3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2019)
This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:https://fast.faa.gov/contractclauses.cfm.
(End of clause)
3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2019)
This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:
https://fast.faa.gov/contractclauses.cfm.
(End of clause)
3.1.7-2 ORGANIZATIONAL CONFLICTS OF INTEREST (JAN 2023)
3.1.7-5 DISCLOSURE OF CONFLICTS OF INTEREST (JUL 2018)
3.2.2.3-33 ORDER OF PRECEDENCE (APR 2024)
3.2.2.3-83 PROHIBITION AGAINST CONTRACTING WITH INVERTED DOMESTIC
CORPORATIONS (OCT 2015)
3.2.2.7-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH
CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (APR 2023)
3.2.2.7-8 DISCLOSURE OF TEAM ARRANGEMENTS (APR 2008)
3.2.5-1 OFFICIALS NOT TO BENEFIT (OCT 2024)
3.2.5-3 GRATUITIES OR GIFTS (OCT 2024)
3.2.5-4 CONTINGENT FEES (OCT 2024)
3.2.5-5 ANTI-KICKBACK PROCEDURES (OCT 2024)
3.2.5-8 WHISTLEBLOWER PROTECTION FOR CONTRACTOR EMPLOYEES (APR 2024)
3.3.1-8 EXTRAS (OCT 2024)
3.3.1-10 AVAILABILITY OF FUNDS (OCT 2024)
3.3.1-14 LIMITATION OF FUNDS (OCT 2024)
3.3.1-15 ASSIGNMENT OF CLAIMS (JUL 2018)
https://fast.faa.gov/contractclauses.cfm
3.3.1-17 PROMPT PAYMENT (OCT 2024)
3.3.1-20 PROVIDING ACCELERATED PAYMENT TO SMALL BUSINESS SUBCONTRACTORS
(OCT 2012)
3.3.1-34 PAYMENT BY ELECTRONIC FUNDS TRANSFER- SYSTEM FOR AWARD
MANAGEMENT (OCT 2024)
3.3.2-1 FAA COST PRINCIPLES (OCT 2019)
3.4.1-12 INSURANCE (OCT 2019)
3.4.2-7 FEDERAL, STATE, AND LOCAL TAXES - FIXED-PRICE, NONCOMPETITIVE
CONTRACT (APR 2025)
3.4.2-8 FEDERAL, STATE, AND LOCAL TAXES - FIXED PRICE CONTRACT (APR 2025)
3.5-1 AUTHORIZATION AND CONSENT (APR 2023)
3.5-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT INFRINGEMENT
(JAN 2009)
3.6.2-2 CONVICT LABOR (APR 2025)
3.6.2-12 EQUAL OPPORTUNITY FOR VETERANS (APR 2022)
3.6.2-13 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (APR 2022)
3.6.2-16 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (APR 2025)
3.6.2-39 TRAFFICKING IN PERSONS (OCT 2024)
3.6.2-44 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR RELATIONS
ACT (APR 2025)
3.6.3-13 AFFIRMATIVE PROCUREMENT OF RECYCLED CONTENT AND PRODUCTS UNDER
SERVICE AND CONSTRUCTION CONTRACTS (OCT 2024)
3.6.3-17 EFFICIENCY IN ENERGY-CONSUMING PRODUCTS (OCT 2024)
3.6.4-2 BUY AMERICAN ACT - SUPPLIES (JAN 2024)
3.6.4-10 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JAN 2010)
3.6.6-1 DRUG FREE WORKPLACE (APR 2023)
3.6.6-2 SEAT BELT USE BY CONTRACTOR EMPLOYEES (APR 2023)
3.6.6-3 CONTRACTOR POLICY TO BAN TEXT MESSAGING WHILE DRIVING (JUL 2023)
3.8.2-19 PROHIBITION ON ADVERTISING (JUL 2019)
3.8.9-2 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND
VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (JUL 2023)
3.9.1-1 CONTRACT DISPUTES (JAN 2020)
3.9.1-2 PROTEST AFTER AWARD (AUG 1997)
3.10.1-7 BANKRUPTCY (APR 1996)
3.10.1-12 CHANGES - FIXED-PRICE (APR 1996)
3.10.1-25 NOVATION AND CHANGE-OF-NAME AGREEMENTS (OCT 2007)
3.10.1-28 CHANGES REQUIRED BY AMS (JAN 2024)
3.10.6-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED PRICE) (OCT
1996)
3.10.6-4 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (JAN 2020)
3.13-11 PLAIN LANGUAGE (JUL 2006)
3.13-14 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT
AWARDS (APR 2025)
3.2.4-16 ORDERING (OCT 2024)
(a) Any supplies and services to be furnished under this contract must be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract. Such orders may be issued from the date of award through the last day of contract ordering period, including any options exercised.
(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of a conflict between a delivery order or task order and this contract, the contract must control.
(c) If mailed, a delivery order or task order is considered "issued" when the FAA deposits the order in the mail.
Orders issued by facsimile, email or other electronic commerce methods are considered "issued" when the FAA sends the order. Orders may be issued orally only if authorized in the contract.
(End of clause)
3.2.4-17 ORDER LIMITATIONS (OCT 2019)
(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than the required amount in Schedule B, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.
(b) Maximum order. The Contractor is not obligated to honor-
(1) Any order for a single item in excess of the class requirement in Schedule B;
(2) Any order for a combination of items in excess of the class requirement in Schedule B; or
(3) A series of orders from the same ordering office within 5 days that together call for quantities exceeding the limitation in subparagraph (1) or (2) above.
(c) If this is a requirements contract, the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) above.
(d) Notwithstanding paragraphs (b) and (c) above, the Contractor must honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 3 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons.
Upon receiving this notice, the Government may acquire the supplies or services from another source.
(End of clause)
3.2.4-19 REQUIREMENTS (OCT 2024)
(a) This is a requirements contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies or services specified in the Schedule are estimates only and are not purchased by this contract. Except as this contract may otherwise provide, if the FAA's requirements do not result in orders in the quantities described as "estimated" or "maximum" in the Schedule, that fact must not constitute the basis for an equitable price adjustment.
(b) Delivery or performance must be made only as authorized by orders issued in accordance with the Ordering clause. Subject to any limitations in the Order Limitations clause or elsewhere in this contract, the Contractor must furnish to the FAA all supplies or services specified in the Schedule and called for by orders issued in accordance with the Ordering clause. The FAA may issue orders requiring delivery to multiple destinations or performance at multiple locations.
(c) Except as this contract otherwise provides, the FAA will order from the Contractor all the supplies or services specified in the Schedule that are required to be purchased by the FAA activity or activities specified in the Schedule.
(d) The FAA is not required to purchase from the Contractor requirements in excess of any limit on total orders under this contract.
(e) If the FAA urgently requires delivery of any quantity of an item before the earliest date that delivery may be specified under this contract, and if the Contractor will not accept an order providing for the accelerated delivery, the FAA may acquire the urgently required goods or services from another source.
(f) Any order issued during the effective period of this contract and not completed within that period must be completed by the Contractor within the time specified in the order. The contract must govern the Contractor's and FAA's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor must not be required to make any deliveries under this contract after the last day of the contract ordering period, including exercised options.
(End of clause)
3.2.4-34 OPTION TO EXTEND SERVICES (OCT 2019)
The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder must not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within the period specified in the Schedule.
(End of clause)
3.2.4-35 OPTION TO EXTEND THE TERM OF THE CONTRACT (JUL 2021)
(a) The Government may extend the term of this contract by written notice (contract modification) to the Contractor prior to the expiration of the current period of performance provided, that the Government will give the Contractor a preliminary written notice of its intent to extend at least 60 days [60 days unless a different number of days is inserted] before the contract expires. The preliminary notice does not commit the Government to an extension.
(b) If the Government exercises this option, the extended contract must be considered to include this option provision.
(c) The total duration of this contract, including the exercise of any options under this clause, must not exceed 6 (months) 5 (years).
(End of clause)
3.3.1-1 PAYMENTS (JUL 2018)
The FAA will pay the Contractor, upon the submission of proper invoices, the prices stipulated in this contract for supplies delivered and accepted or services rendered and accepted, less any deductions provided in this contract.
Unless otherwise specified, payment will be made upon acceptance of partial deliveries or any portion of the work delivered or rendered for which a price is separately stated in the contract.
(End of clause)
3.3.1-11 AVAILABILITY OF FUNDS FOR THE NEXT FISCAL YEAR (APR 1996)
Funds are not presently available for performance under this contract beyond 09/30/2026. The FAA's obligation for performance of this contract beyond that date is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the FAA for any payment may arise for performance under this contract beyond 09/30/2026, until funds are made available to the Contracting Officer for performance and until the Contractor receives notice of availability, to be confirmed in writing by the Contracting Officer.
(End of clause)
3.3.1-33 SYSTEM FOR AWARD MANAGEMENT (JAN 2024)
(a) Definitions. As used in this clause
"Registered in the SAM database" means that the Contractor has entered all mandatory information, including the Unique Identity Identifier (UEI) or the Electronic Funds Transfer indicator, into the SAM database.
"System for Award Management (SAM) database" means the primary Government repository for Contractor information required for the conduct of business with the Government.
"Unique Entity Identifier (UEI)" (also known as the Unique Entity ID) means a number or other identifier used to identify a specific commercial, nonprofit, or Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.
"Electronic Funds Transfer indicator" means a 4-character suffix to the Unique Entity Identifier. This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.
(b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee must be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.
(2) The offeror must enter, in Representations, Certifications and Other Statements of Offerors Section of the solicitation, the UEI or EFT indicator that identifies the offeror's name and address exactly as stated in the offer. The UEI will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.
(c) If the offeror does not have a UEI, it should contact www.sam.gov directly to obtain one.
The offeror should be prepared to provide the following information:
(1) Company legal business name.
(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.
(3) Company Physical Street Address, City, State, and ZIP Code.
(4) Company Mailing Address, City, State and ZIP Code (if different from physical street address).
(5) Company Telephone Number.
(6) Date the company was started.
(7) Number of employees at your location.
(8) Chief executive officer/key manager.
(9) Line of business (industry).
(10) Company Headquarters name and address (reporting relationship within your entity).
(d) If the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered offeror.
(e) Processing time should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.
(f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. If registered in SAM as a Service-Disabled Veteran- Owned Small Business (SDVOSB), by submission of an offer, the offeror acknowledges that they are certified as an SDVOSB under the Small Business Administration's Veteran Small Business Certification Program (VetCert).
(g)(1)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in AMS Procurement Guidance, the Contractor must provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to:
(A) Change the name in the SAM database;
(B) Comply with the requirements of AMS regarding novation and change-of-name agreements; and
(C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide the Contracting Officer with the notification, sufficient documentation to support the legally changed name.
(ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract.
(2) The Contractor must not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims. Assignees must be separately registered in the SAM database. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract.
(h) Offerors and Contractors may obtain information on registration and annual confirmation requirements via the internet at http://www.sam.gov.
(End of Clause)
3.3.1-36 AVAILABILITY OF FUNDS - OPTION PERIODS UNDER A CONTINUING RESOLUTION
(OCT 2024)
Due to the possibility of the enactment of a continuing resolution in lieu of an annual appropriation, full fiscal year funding may not be available for an entire contract option period. In the event of a continuing resolution, FAA will only be liable for an amount based on the time period specified by the continuing resolution. The amount of funds made available by the continuing resolution will be specified by subsequent modification. If the contractor provides services in excess of the funded amount or beyond the covered period, the contractor does so at its own risk.
(End of Clause)
3.3.1-37 LIMITATION ON GOVERNMENT'S OBLIGATION (JUL 2018)
(a) Of the total price of contract line item number(s) (CLINs) 0001-0015, $0.00 is presently available for payment and allocated to these CLINs.
(b) The Contractor agrees to perform on these CLINs up to the point at which, in the event of termination of this contract pursuant to the applicable "Termination for Convenience of the Government" clause, the total amount payable by the Government (including amounts payable in respect of subcontracts and settlement costs,) pursuant to paragraph (c) below, would in the exercise of reasonable judgment by the Contractor approximate the total amount currently allotted to the contract. The Contractor is not authorized to continue work on these CLINs beyond this point. The Government is not obligated to reimburse the Contractor in excess of the amount from time to time allotted to the contract, regardless of anything to the contrary in "Termination for Convenience of the Government."
(c) Funds presently allotted to this contract are estimated to cover the work to be performed until N/A. If funds allotted are considered by the Contractor to be inadequate to cover the work to be performed until this date, or an agreed substitute date, the Contractor must notify the Contracting Office in writing when within the next 30 days the work will reach a point at which, in the event of termination of this contract pursuant to "Termination for Convenience of the Government," the total amount payable by the Government pursuant to paragraph (e) below, will approximate 85 percent of the total amount then allotted to the contract. The notice must state the estimated date when this point will be reached and the estimated amount of additional funds required to continue performance to the above or an agreed substitute date. The Contractor must, 30 days prior to the date above written or agreed substitute date, advise the Contracting Officer in writing as to the estimated amount of additional funds which will be required for the timely performance of the CLINs for a further period as may be specified in this clause or otherwise agreed to by the parties. If after this notification, additional funds are not allotted by the date above written or by an agreed substitute date, the Contracting Officer will, upon written request of the Contractor, terminate this contract on such date or the date set forth in the request, whichever is later, pursuant to "Termination for Convenience of the Government."
(d) When additional funds are allotted for continued performance of the CLINs, the parties will agree on the applicable period of contract performance that will be covered by such funds. Paragraphs (b) and (c) above apply to the additional allotted funds and agreed substituted date and the contract will be modified accordingly.
(e) If the Contractor incurs additional costs, or is delayed in the performance of the work under this contract, solely by the reason of the failure of the Government to allot additional funds in amounts sufficient for the timely performance of this contract, and if additional funds are allotted, an equitable adjustment will be made in the price or prices (including appropriate target, billing, and ceiling prices where applicable) of the CLINs, in the time of delivery, or in both. Failure to agree to any such equitable adjustment hereunder will be a dispute concerning a question of fact within the meaning of the "Contract Disputes" Clause.
(f) The Government may at any time prior to termination, and with the consent of the Contractor, after notice of termination, allot additional funds for this contract.
(g) The provisions of this clause with respect to termination will in no way be deemed to limit the rights of the Government under the applicable AMS "Default" clause. The provisions of this clause are limited to the work on and allotment of funds for the CLIN(s) in paragraph (a) above. This clause no longer applies upon the allotment of funds for the total price of the CLINs except for rights and obligations existing under this clause.
(h) Nothing in this clause will affect the right of the Government to terminate this contract pursuant to "Termination for Convenience of the Government." In the event of a conflict between this clause and any other term or condition of this contract, this clause will take precedence.
(End of clause)
3.6.2-14 EMPLOYMENT REPORTS ON VETERANS (APR 2022)
(a) Unless the contractor is a State or local government agency, the contractor must report at least annually, as required by the Secretary of Labor, on:
(1) The total number of employees in the contractor's workforce, by job category and hiring location, who are protected veterans (i.e., active duty wartime or campaign badge veterans, Armed Forces service medal veterans, disabled veterans, and recently separated veterans),
(2) The total number of new employees hired during the period covered by the report, and of the total, the number of protected veterans; and
(3) The maximum number and minimum number of employees of the Contractor or subcontractor at each hiring location during the period covered by the report.
(b) The above items must be reported by completing the VETS-4212 "Federal Contractor Veterans' Employment Report" (see "VETS-4212 Federal Contractor Reporting" and "Filing Your VETS-4212 Report" at http://www.dol.gov/vets/vets4212.htm).'
(c) The Contractor must submit VETS-4212 Reports no later than September 30 of each year.
(d) The employment activity report required by paragraphs (a)(2) and (a)(3) of this clause shall reflect total new hires, and maximum and minimum number of employees, during the most recent 12-month period preceding the ending date selected for the report. Contractors may select an ending date:
(1) As of the end of any pay period between July 1 and August 31 of the year the report is due; or
(2) As of December 31, if the Contractor has prior written approval from the Equal Employment Opportunity Commission to do so for purposes of submitting the Employer Information Report EEO-1 (Standard Form 100).
(e) The count of veterans reported must be based on data known to the contractor when completing the VETS-4212.
The Contractor's knowledge of veterans status may be obtained in a variety of ways, including an invitation to applicants to self-identify (in accordance with 41 CFR 60-300.42), voluntary self-disclosure by employees, or actual knowledge of veteran status by the contractor. This paragraph does not relieve the employer of liability for a determination under 38 U.S.C. 4212.
(f) Subcontracts. The Contractor must include the terms of this clause in every subcontract or purchase order of $150,000 or more unless exempted by rules, regulations, or orders of the Secretary of Labor.
(End of clause)
3.8.9-4 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES
DEVELOPED OR PROVIDED BY KASPERSKY LAB ENTITIES (JAN 2024)
(a) Definitions. As used in this clause-
Kaspersky Lab covered article means any hardware, software, or service that-
(1) Is developed or provided by a Kaspersky Lab covered entity;
(2) Includes any hardware, software, or service developed or provided in whole or in part by a Kaspersky Lab covered entity; or
(3) Contains components using any hardware or software developed in whole or in part by a Kaspersky Lab covered entity.
Kaspersky Lab covered entity means-
(1) Kaspersky Lab;
(2) Any successor entity to Kaspersky Lab, including any change in name, e.g. "Kaspersky";
(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or
(4) Any entity of which Kaspersky Lab has a majority ownership.
(b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits Government use of any Kaspersky Lab covered article. The Contractor is prohibited from-
(1) Providing any Kaspersky Lab covered article that the Government will use; and
(2) Using any Kaspersky Lab covered article in the development of data or deliverables first produced in the performance of the contract.
(c) Reporting requirement.
(1) In the event the Contractor identifies a Kaspersky Lab covered article provided to the Government during contract performance, or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor must report this in writing to the Contracting Officer. For indefinite delivery contracts, the Contractor must report this in writing to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order.
(2) The Contractor must report the following information pursuant to paragraph (c) (1) of this clause:
(i) Within 3 business days from the date of such identification or notification: the contract number; the order number(s), if applicable; supplier name; brand; model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended.
(ii) Within 10…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .