6973GH-20-Q-00146.pdf

6973GH-20-Q-00146

1. REQUEST NO.

4a. ISSUED BY

NAME

a. NAME

c. STREET ADDRESS

d. CITY

9. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 4a ON

OR BEFORE CLOSE OF BUSINESS (Date)

2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO.

5. DELIVERY BY (Date)

6. DELIVERY

8. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

PAGE OF PAGES

4b. FOR INFORMATION CALL: (No collect calls)

TELEPHONE NUMBER

AREA CODE NUMBER

7. TO:

b. COMPANY

e. STATE f. ZIP CODE

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 4a. This request does not commit the Contract Authority to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

10. SCHEDULE (Include applicable Federal, State and local taxes)

THIS RFQ

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER)

IS IS NOT A SMALL BUSINESS SET ASIDEX

AC-20-04000

1 22

FAA AERONAUTICAL CENTER

PO BOX 25082

BLDG 014-AHQ, ROOM 233A

AAQ-721 LOGISTICS CENTER ACQ

OKLAHOMA CITY OK 73125

90 Days After Award

W693120F

693120 DOT FAA

AIR TRAFFIC CONTROL SYS COMM CNTR

3701 MACINTOSH DR

WARRENTON VA 201870000

WARRENTON

VA 201870000

405 954-7814Cilony Alejandro

1700 ES

FOB DESTINATION

OTHER

(See Schedule)X

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

Instructions: Respondents must provide the following:

1. Completed Request for Quotation document including price information. The representations and certifications are in accordance with SAM.

2. Support documentation for quoted prices (commercial price list, invoices, etc.)

Submit quote electronically to Cilony.alejandro@faa.gov.

Basis of AWARD will be price only

00001 88011_Video Projectors/Lifts/Screens/& Switches Warrenton VA_Installation of Acoustical Treatment at the ATCSCC FAA Air Traffic Control System Command Center Continued ...

11. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations

12. NAME AND ADDRESS OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

13. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

a. NAME OF QUOTER

AREA CODE

NUMBER

14. DATE OF QUOTATION

b. TELEPHONE are are not attached

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 22 CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

6973GH-20-Q-00146

Delivery: 90 Days After Award

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

Section -- - Terms and Conditions Terms and Conditions List

(a) By submission of this offer, the offeror attests that all representations and certifications as reflected in the System for Award Management (SAM) are current and accurate as of the date the offer is submitted. The offeror shall provide immediate written notice to the Contracting Officer if at any time prior to award the offeror learns that any certification or representation in SAM was erroneous when this offer was submitted or has become erroneous by reason of changed circumstances.

(b) Clause List

3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2019)

This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:

https://fast.faa.gov/contractclauses.cfm.

(End of clause)

3.1.7-2 ORGANIZATIONAL CONFLICTS OF INTEREST (JUL 2018)

3.2.2.3-81 PROHIBITION AGAINST CONTRACTING WITH INVERTED DOMESTIC

CORPORATIONS-REPRESENTATION (OCT 2015)

3.2.2.3-82 PROHIBITION ON CONDUCTING RESTRICTED BUSINESS OPERATIONS IN SUDAN -

CERTIFICATION (JUL 2012)

3.2.2.3-83 PROHIBITION AGAINST CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(OCT 2015)

3.2.2.7-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (APR 2011)

3.2.2.7-8 DISCLOSURE OF TEAM ARRANGEMENTS (APR 2008)

3.2.5-1 OFFICIALS NOT TO BENEFIT (OCT 2019)

3.2.5-3 GRATUITIES OR GIFTS (OCT 2019)

3.2.5-4 CONTINGENT FEES (OCT 1996)

3.2.5-7 DISCLOSURE REGARDING PAYMENTS TO INFLUENCE CERTAIN FEDERAL

TRANSACTIONS (OCT 2019)

3.2.5-8 WHISTLEBLOWER PROTECTION FOR CONTRACTOR EMPLOYEES (APR 1996)

3.3.1-1 PAYMENTS (JUL 2018)

3.3.1-8 EXTRAS (JUL 2018)

3.3.1-15 ASSIGNMENT OF CLAIMS (JUL 2018)

3.3.1-20 PROVIDING ACCELERATED PAYMENT TO SMALL BUSINESS SUBCONTRACTORS (OCT

2012)

3.3.1-34 PAYMENT BY ELECTRONIC FUNDS TRANSFER- SYSTEM FOR AWARD MANAGEMENT

(JUL 2018)

3.4.1-10 INSURANCE - WORK ON A GOVERNMENT INSTALLATION (OCT 2019)

3.4.2-6 TAXES - CONTRACTS PERFORMED IN U.S. POSSESSIONS OR PUERTO RICO (OCT 1996)

3.4.2-8 FEDERAL, STATE, AND LOCAL TAXES - FIXED PRICE CONTRACT (JUL 2019)

3.5-13 RIGHTS IN DATA - GENERAL (OCT 2014)

3.6.1-3 UTILIZATION OF SMALL, SMALL DISADVANTAGED AND WOMEN-OWNED, AND

SERVICE-DISABLED VETERAN OWNED SMALL BUSINESS CONCERNS (OCT 2019)

3.6.1-7 LIMITATIONS ON SUBCONTRACTING (JUL 2019)

3.6.2-4 WALSH-HEALEY PUBLIC CONTRACTS ACT (OCT 2018)

3.6.2-9 EQUAL OPPORTUNITY (JUL 2020)

3.6.2-12 EQUAL OPPORTUNITY FOR VETERANS (JUL 2020)

3.6.2-13 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (JUL 2020)

3.6.2-22 SUBCONTRACTS (LABOR STANDARDS) (JAN 2019)

3.6.2-35 PREVENTION OF SEXUAL HARASSMENT (OCT 2018)

3.6.2-39 TRAFFICKING IN PERSONS (APR 2019)

3.6.3-14 USE OF ENVIRONMENTALLY PREFERABLE PRODUCTS (JAN 2020)

3.6.3-16 DRUG FREE WORKPLACE (MAR 2009)

3.6.3-23 DELIVERY OF ELECTRONIC AND PAPER DOCUMENTS (JAN 2020)

3.6.4-5 BUY AMERICAN - STEEL AND MANUFACTURED PRODUCTS (JUL 2010)

3.6.4-10 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JAN 2010)

3.6.4-23 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (OCT 2019)

3.6.5-1 UTILIZATION OF INDIAN ORGANIZATIONS AND INDIAN OWNED ECONOMIC

ENTERPRISES (MAR 2009)

3.8.2-9 SITE VISIT (APR 1996)

3.9.1-1 CONTRACT DISPUTES (JAN 2020)

3.9.1-2 PROTEST AFTER AWARD (AUG 1997)

3.10.1-7 BANKRUPTCY (APR 1996)

3.10.1-9 STOP-WORK ORDER (OCT 1996)

3.10.1-12 CHANGES - FIXED-PRICE (APR 1996)

3.10.1-25 NOVATION AND CHANGE-OF-NAME AGREEMENTS (OCT 2007)

3.10.3-2 GOVERNMENT PROPERTY - BASIC CLAUSE (APR 2019)

3.10.4-2 INSPECTION OF SUPPLIES - FIXED PRICE (NOV 1997)

3.10.4-4 INSPECTION OF SERVICES - BOTH FIXED-PRICE & COST REIMBURSEMENT (APR 1996)

3.10.4-16 RESPONSIBILITY FOR SUPPLIES (APR 1996)

3.10.6-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED PRICE) (OCT 1996)

3.10.6-4 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (JAN 2020)

3.13-5 SEAT BELT USE BY CONTRACTOR EMPLOYEES (OCT 2001)

3.13-13 CONTRACTOR POLICY TO BAN TEXT MESSAGING WHILE DRIVING (JAN 2011)

3.1.9-1 ELECTRONIC COMMERCE AND SIGNATURE (JUL 2020)

(a) The Electronic Signatures in Global and National Commerce Act (E-SIGN) establishes a legal equivalence between:

(1) Contracts written on paper and contracts in electronic form;

(2) Pen-and-ink signatures and electronic signatures; and

(3) Other legally-required written records and the same information in electronic form.

(b) With the submission of an offer, the offeror acknowledges and accepts the utilization of electronic commerce as part of the requirements of this solicitation and the resultant contract.

(c) Certain documents may need to be provided or maintained in original form, such as large-scale drawings impractical to convert to electronic format or a document with a raised seal signifying authenticity. This clause does not change or affect any other requirements that a document must be in paper format to satisfy legal requirements such as for certain real estate transactions.

(d) The use of electronic signature technology is authorized under this solicitation and the resulting contract.

(e) Contractors must not digitally sign any documents with software that uses the Secure Hash Algorithm 1 (SHA- 1). All digitally signed documents and contracts sent to the FAA must use a SHA-256 or higher hash algorithm. This is based on the National Institute of Standards and Technology (NIST) Policy Statement on Hash Functions dated August 5, 2015. Further guidance on the use of SHA-256 is in NIST Special Publication (SP) 800-57 Part 1, section

5.6.2 as amended and SP 800-131A, Revision 1 dated November 6, 2015. Additional guidance on the use of SHA-3 is in NIST SP 800-185 as amended.

(f) Contractors do not have to update documents previously digitally signed using SHA-1 hash algorithms unless the document requires updating. The FAA and contractors may continue to use SHA-1 for the following applications:

Verifying old digital signatures and time stamps, generating and verifying hash-based message authentication codes (HMACs), key derivation functions (KDFs), and random bit/number generation.

(End of Clause)

3.3.1-33 SYSTEM FOR AWARD MANAGEMENT (JUL 2018)

(a) Definitions. As used in this clause

"Data Universal Numbering System (DUNS) number" means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.

"Data Universal Numbering System +4 (DUNS+4) number" means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.)

This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.

"Registered in the SAM database" means that the Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, into the SAM database.

"System for Award Management (SAM) Database" means the primary Government repository for Contractor information required for the conduct of business with the Government.

(b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee must be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The offeror must enter, in Representations, Certifications and Other Statements of Offerors Section of the solicitation, the DUNS or DUNS +4 number that identifies the offeror's name and address exactly as stated in the offer. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

(c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one.

(1) An offeror may obtain a DUNS number

(i) If located within the United States, by calling Dun and Bradstreet at 1-866-705-5711 or via the Internet at http://fedgov.dnb.com/webform; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office.

(2) The offeror should be prepared to provide the following information:

(i) Company legal business.

(ii) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(iii) Company Physical Street Address, City, State, and ZIP Code.

(iv) Company Mailing Address, City, State and ZIP Code (if different from physical street address).

(v) Company Telephone Number.

(vi) Date the company was started.

(vii) Number of employees at your location.

(viii) Chief executive officer/key manager.

(ix) Line of business (industry).

(x) Company Headquarters name and address (reporting relationship within your entity).

(d) If the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered offeror.

(e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. If registered in SAM as a Service-Disabled Veteran-Owned Small Business (SDVOSB), by submission of an offer, the offeror acknowledges that they are designated as a SDVOSB by the Department of Veterans Affairs, and this designation appears as such on the Veteran Affairs website, https://www.vip.vetbiz.gov.

(g)(1)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in AMS Procurement Guidance, the Contractor must provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to:

(A) change the name in the SAM database;

(B) comply with the requirements of AMS regarding novation and change-of-name agreements; and

(C) agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide the Contracting Officer with the notification, sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract.

(2) The Contractor must not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims. Assignees must be separately registered in the SAM database. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract.

(h) Offerors and Contractors may obtain information on registration and annual confirmation requirements via the internet at http://www.sam.gov.

(End of Clause)

3.3.1-35 CERTIFICATION OF REGISTRATION IN SYSTEM FOR AWARD MANAGEMENT (AUG

2012)

In accordance with Clause 3.3.1-33, System for Award Management (SAM), offeror certifies that they are registered in the SAM Database and have entered all mandatory information including the DUNS or DUNS+4 Number.

Name: ______________________________

Title: _______________________________

Phone Number: _______________________

(End of provision)

3.4.1-12 INSURANCE (OCT 2019)

(a) During the term of this contract and any extension, the contractor must maintain at its own expense the insurance required by this clause. Insurance companies must be acceptable to the Federal Aviation Administration. Policies must include all terms and provisions required by the Federal Aviation Administration.

(b) The contractor must maintain and furnish evidence of the following insurance, with the stated minimum limits:

(1) Worker's Compensation and Employer's Liability. The contractor must comply with applicable Federal and State workers' compensation and occupational disease statutes. The contractor must maintain employer's liability coverage of at least $100,000, except in States with exclusive or monopolistic funds that do not permit worker's compensation to be written by private carriers.

(2) General Liability. The contractor must maintain bodily injury general liability insurance written on a comprehensive form of policy of at least $100,000* per person and $500,000* per occurrence. Property damage limits, if any, will be set forth elsewhere in the "Schedule."

(3) Automobile Liability. If automobiles will be used in connection with performance of this contract, the contractor must maintain automobile liability insurance written on a comprehensive form of policy with coverage of at least $200,000* per person and $500,000* per occurrence for bodily injury and $20,000* per occurrence for property damage.

(4) Aircraft Liability. If aircraft will be used in connection with performance of this contract, the contractor must maintain aircraft public and passenger liability insurance with coverage of at least $200,000* per person and $500,000* per occurrence for bodily injury other than passenger liability, and $200,000* per occurrence for property damage. Coverage for passenger liability bodily injury must be at least $200,000* multiplied by the number of seats or passengers, whichever is greater.

(5) Watercraft Liability. When watercraft will be used in connection with performing the contract, the contractor must provide watercraft liability insurance. Limits must be at least $1,000,000* per occurrence.

The policy must include coverage for owned, non-owned and hired watercraft.

(6) Environmental Impairment Liability. When the contract may involve hazardous wastes, the contractor must provide environmental impairment liability insurance with coverage of at least $1,000,000* bodily injury per occurrence and $1,000,000* property damage per occurrence. Such insurance must include coverage for the clean up, removal, storage, disposal, transportation, and use of pollutants.

(7) Medical Malpractice. When the contract will involve health care services, the contractor must maintain medical malpractice liability insurance with coverage of at least $500,000* per occurrence.

(c) Each policy must include substantially the following provision:

"It is a condition of this policy that the company furnish written notice to the U.S. Federal Aviation Administration 30 days in advance of the effective date of any reduction in or cancellation of this policy."

(d) The contractor must furnish a certificate of insurance or, if required by the Contracting Officer, true copies of liability policies and manually countersigned endorsements of any changes, including the FAA's contract number to ensure proper filing of documents. Insurance must be effective, and evidence of acceptable insurance furnished, before beginning performance under this contract. Evidence of renewal must be furnished not later than five days before a policy expires.

(e) The maintenance of insurance coverage as required by this clause is a continuing obligation, and the lapse or termination of insurance coverage without replacement coverage being obtained will be grounds for termination for default.

*Unless modified in the "Schedule"

(End of clause)

3.6.1-17 NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE (JAN 2017)

The North American Industry Classification System (NAICS) code for this procurement is:

334310 The small business size standard as defined by the Small Business Administration is the following:

For NAICS codes based on annual receipts, the annual average receipts for the last three fiscal years cannot exceed [

For NAICS codes based on the number of employees, the average number of employees over the last twelve-month period cannot exceed 750.

(End of provision)

3.6.2-3 WALSH-HEALEY PUBLIC CONTRACTS ACT REPRESENTATION (OCT 2010)

The offeror represents as a part of this offer that the offeror:

is ( ) or is not ( ) a regular dealer in, or is ( ) or is not ( ) a manufacturer of, the supplies offered.

(End of provision)

3.6.2-8 AFFIRMATIVE ACTION COMPLIANCE (APR 1996)

The offeror represents that (a) it ( ) has developed and has on file, ( ) has not developed and does not have on file, at each establishment, affirmative action programs required by the rules and regulations of the Secretary of Labor (41 CFR 60-1 and 60-2), or (b) it ( ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(End of provision)

3.6.2-14 EMPLOYMENT REPORTS ON VETERANS (JAN 2020)

(a) Unless the contractor is a State or local government agency, the contractor must report at least annually, as required by the Secretary of Labor, on:

(1) The total number of employees in the contractor's workforce, by job category and hiring location, who are disabled veterans, other protected veterans, Armed Forces service medal veterans, and recently separated veterans,

(2) The total number of new employees hired during the period covered by the report, and of the total, the number of disabled veterans, other protected veterans, Armed Forces service medal veterans, and recently separated veterans; and

(3) The maximum number and minimum number of employees of the Contractor or subcontractor at each hiring location during the period covered by the report.

(b) The above items must be reported by completing the VETS-4212 "Federal Contractor Veterans' Employment Report" (see "VETS-4212 Federal Contractor Reporting" and "Filing Your VETS-4212 Report" at http://www.dol.gov/vets/vets4212.htm).'

(c) The VETS-4212 Report must be submitted no later than September 30 of each year.

(d) The employment activity report required by paragraph (a)(2) of this clause must reflect total hires during the most recent 12-month period as of the ending date selected for the employment profile report required by paragraph

(a)(1) of this clause. Contractors may select an ending date: (1) As of the end of any pay period during the period January through March 1st of the year the report is due, or (2) as of December 31, if the contractor has previous written approval from the Equal Employment Opportunity Commission to do so for purposes of submitting the Employer Information Report EEO-1 (Standard Form 100).

(e) The count of veterans reported according to paragraph (a) of this clause must be based on data known to the contractor when completing the VETS-4212. The Contractor's knowledge of veterans status may be obtained in a variety of ways, including an invitation to applicants to self-identify (in accordance with 41 CFR 60-300.42), voluntary self-disclosure by employees, or actual knowledge of veteran status by the contractor. This paragraph does not relieve the employer of liability for a determination under 38 U.S.C. 4212.

(f) Subcontracts. The Contractor must include the terms of this clause in every subcontract or purchase order of $150,000 or more unless exempted by rules, regulations, or orders of the Secretary of Labor.

(End of clause)

3.6.4-19 PROHIBITION CONTRACTING WITH ENTITIES ENGAGING IN CERTAIN ACTIVITIES OR

TRANSACTIONS RELATED TO IRAN- REPRESENTATION AND CERTIFICATIONS (APR 2013)

(a) Definitions.

"Person"

(1) Means

(i) A natural person;

(ii) A corporation, business association, partnership, society, trust, financial institution, insurer, underwriter, guarantor, and any other business organization, any other nongovernmental entity, organization, or group, and any governmental entity operating as a business enterprise; and

(iii) Any successor to any entity described in paragraph (1)(ii) of this definition; and

(2) Does not include a government or governmental entity that is not operating as a business enterprise.

"Sensitive Technology"

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically (i)To restrict the flow of free, unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict the speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to Section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

(3)The offeror must e-mail any questions concerning sensitive technology to the Department of State at CISADA106@state.gov.

(b) Certification. Except as provided in paragraph (c) of this provision or if a waiver has been granted in accordance with AMS Iran Sanctions Guidance, by submission of its offer, the offeror

(1)Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran;

(2) Certifies that the offeror, or any other entity owned or controlled by, or person controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act of 1996.

These sanctioned activities are in the areas of development of the petroleum resources of Iran, production of refined petroleum products in Iran, sale and provision of refined petroleum products to Iran, and contributing to Iran's ability to acquire or develop certain weapons or technologies; and

(3) Certifies that the offeror, and any other entity owned or controlled by, or person controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,000 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act 50 USC 1701 et. seq. (see the Department of the Treasury's Office of Foreign Assets Control (OFAC) Specially Designated Nationals and Blocked Persons List on their website).

(c) The certification requirement of paragraph (b) of this provision does not apply if the acquisition is subject to the trade-related acts in AMS Trade Agreements Guidance.

(End of provision)

3.6.4-24 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES- REPRESENTATION

(JAN 2020)

(a) Definitions. As used in this provision, "covered telecommunications equipment or services" has the meaning per the clause 3.6.4-23 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment".

(b) Procedures. The offeror must review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for covered telecommunications equipment or services.

(c) Representation. The offeror represents that it [ ] does, [ ] does not provide covered telecommunications equipment or services as part of its offered products or services to the Government in the performance of any contract, subcontract, to other contractual instrument.

(end of provision)

3.10.2-1 SUBCONTRACTS (FIXED-PRICE CONTRACTS) (JAN 2019)

(a) Consent to subcontract in this clause applies to subcontracts resulting from unpriced modifications to this contract if required as indicated under (b) or (c) below.

(b) Subcontract, as used in this clause, includes but is not limited to purchase orders, and changes and modifications to purchase orders. The Contractor must notify the Contracting Officer reasonably in advance of entering into any subcontract if the Contractor does not have an approved purchasing system and if the subcontract:

(1) Is proposed to exceed $150,000; or

(2) Is one of a number of subcontracts with a single subcontractor, under this contract, for the same or related supplies or services, that in the aggregate are expected to exceed $150,000.

(c) If the contractor has an approved purchasing system, the contractor nevertheless must obtain the Contracting Officer's written consent before placing the following subcontracts:

[Fillin subcontract] [Fillin subcontract] [Fillin subcontract]

(d) The advance notification required by paragraphs (b) and (c) above must include-

(1) A description of the supplies or services to be subcontracted;

(2) Identification of the type of subcontract to be used;

(3) Identification of the proposed subcontractor and an explanation of why and how the proposed subcontractor was selected, including the competition obtained;

(4) The proposed subcontract price and the Contractor's cost or price analysis;

(5) The subcontractor's current, complete, and accurate cost or pricing data and Certificate of Current Cost or Pricing Data, if required by other contract provisions;

(6) The subcontractor's Disclosure Statement or Certificate relating to Cost Accounting Standards when such data are required by other provisions of this contract; and

(7) A negotiation memorandum reflecting-

(i) The principal elements of the subcontract price negotiations;

(ii) The most significant considerations controlling establishment of initial or revised prices;

(iii) The reason cost or pricing data were or were not required;

(iv) The extent, if any, to which the Contractor did not rely on the subcontractor's cost or pricing data in determining the price objective and in negotiating the final price;

(v) The extent, if any, to which it was recognized in the negotiation that the subcontractor's cost or pricing data were not accurate, complete, or current; the action taken by the Contractor and subcontractor; and the effect of any such defective data on the total price negotiated;

(vi) The reasons for any significant difference between the Contractor's price objective and the price negotiated; and

(vii) A complete explanation of the incentive fee or profit plan when incentives are used. The explanation must identify each critical performance element, management decisions used to quantify each incentive element, reasons for the incentives, and a summary of all trade-off possibilities considered.

(e) The Contractor must obtain the Contracting Officer's written consent before placing any subcontract for which advance notification is required under paragraph (b) above. However, the Contracting Officer may ratify in writing any such subcontract. Ratification will constitute the consent of the Contracting Officer.

(f) Even if the Contractor's purchasing system has been approved, the Contractor must obtain the Contracting Officer's written consent before placing subcontracts identified below:

(g) Unless the consent or approval specifically provides otherwise, neither consent by the Contracting Officer to any subcontract nor approval of the Contractor's purchasing system will constitute a determination:

(1) of the acceptability of any subcontract terms or conditions,

(2) of the acceptability of any subcontract price or of any amount paid under any subcontract, or

(3) to relieve the Contractor of any responsibility for performing this contract.

(h) No subcontract placed under this contract will provide for payment on a cost-plus-a-percentage-of-cost basis.

(i) The Government reserves the right to review the Contractor's purchasing system.

(End of clause)

3.13-4 CONTRACTOR IDENTIFICATION NUMBER - DATA UNIVERSAL NUMBERING SYSTEM

(DUNS) NUMBER (AUG 2012)

(a) Definitions. As used in this clause

"Contractor Identification Number," as used in this provision, means "Data Universal Numbering System (DUNS) number, which is a nine-digit number assigned by Dun and Bradstreet Information Services, to identify unique business entities (taken from SAM clause)

"Data Universal Numbering System +4 (DUNS+4) number" means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.)

This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer.

(b) Contractor identification is essential for receiving payment and complying with statutory contract reporting requirements. Therefore, the offeror shall provide its DUNS or DUNS+4 number below. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

DUNS OR DUNS+4 NUMBER: _________________________

(c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one.

(1) An offeror may obtain a DUNS number

(i) If located within the United States, by calling Dun and Bradstreet at 1-866-705-5711 or via the Internet at http://www.dnb.com/; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office.

(2) The offeror should be prepared to provide the following information:

(i) Company legal business.

(ii) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(iii) Company Physical Street Address, City, State, and ZIP Code.

(iv) Company Mailing Address, City, State and ZIP Code (if different from physical street address).

(v) Company Telephone Number.

(vi) Date the company was started.

(vii) Number of employees at your location.

(viii) Chief executive officer/key manager.

(ix) Line of business (industry).

(x) Company Headquarters name and address (reporting relationship within your entity).

(End of provision)

3.14-2 CONTRACTOR PERSONNEL SUITABILITY REQUIREMENTS (JAN 2019)

1. No contractor employee, subcontractor, or consultant will be allowed unescorted access to any FAA facility;

access to FAA sensitive information; or access to FAA systems or resources unless they have been authorized by the FAA Office of Personnel Security (AXP).

2. Consistent with FAA Order 1600.72, AXP must approve designated risk levels for the positions under the contract, to be determined by the FAA Operating Office (the organization with the requirement) in coordination with the COR, using the OPM Position Designation Automated Tool (PD Tool).

3. For all contractor employees, subcontractors, or consultants requiring access to FAA facilities, sensitive information, systems, or resources, the contractor must submit to their responsible AXP office a point of contact (POC) who will be responsible for entering all contractor applicant data into the Vendor Applicant Process (VAP) system (vap.faa.gov).

4. If an applicant has had a previous US Government conducted background investigation, which meets the investigative requirements for the position and meets established reciprocity guidelines, it will be accepted by the FAA. The FAA reserves the right to conduct further investigations, including requesting additional information from the applicant, if necessary.

5. If no previous investigation exists, or if the previous investigation does not meet investigative requirements for the position, AXP will:

a. Send the applicant an e-mail (this step may be delegated to VAP POC) stating that the applicant must complete a form through the electronic Questionnaires for Investigations Processing (eQIP) system;

b. Instruct the applicant how to enter and complete the eQIP form;

c. Provide where to send/fax applicable forms; and

d. Provide instructions regarding fingerprinting.

The applicant must complete the eQIP form and submit other required material within 15-calendar days of receiving the e-mail from AXP. For items to be submitted outside eQIP, the contractor must submit the required information, referencing the contract number, to their responsible AXP office identified below:

For Headquarters Contracts:

Manager, Personnel Security Suitability Branch, AXP-320 800 Independence Avenue, S.W., Room 315 Washington, D.C. 20591

Regional and Center Contracts:

Regional and Center Contracts:

Mike Monroney Aeronautical Center Contracts:

Mgr., Investigations and Internal Security Branch, AMC-751 Federal Aviation Administration 6500 S. MacArthur Blvd.

Oklahoma City, OK 73169

6. No contract employee, subcontractor, or consultant will work in any position unless AXP has authorized them to begin work. Authorization will be in the form of an Interim or Final Suitability email notification from AXP to the VAP POC and CO.

7. No contract employees, subcontractor, or consultant will be issued a FAA Personal Identity Verification (PIV) card unless they have been granted an Interim or Final suitability from AXP.

8. The Contractor must update the VAP within twenty-four (24) hours after any contractor employee is terminated or transferred from the contract. If the FAA issued the contract employee a PIV card, the contractor must collect the card and return it to AXP within five business-days of the employee's termination or transfer.

9. The CO will provide notice to the contractor within 24-hours after receipt of a determination that the contractor or its employee has not complied with security-related contract requirements, security related FAA Orders, or if a contractor employee's conduct is objectionable or contrary to the public interest, or inconsistent with the best interest of national security. The notice will instruct the contractor to remove its employee's access to FAA premises or networks, or otherwise remedy the contractor's performance.

10. The contractor must immediately comply with the CO's direction to remedy its security performance at the contractor's expense, including removing the employee from FAA premises and networks. If the contractor employee is working under an interim suitability authorization, the contractor must take appropriate action, including the removal of the contractor employee from working on the FAA contract, at their own expense. Once action has been taken, the contractor must report the action via the VAP within the timeframe prescribed in paragraph 8 of this clause.

11. After coordination with AXP, the CO may require contractor employees to submit any other security information deemed reasonably necessary to protect the interests of the FAA. This includes submitting to additional fingerprinting and background reinvestigations required under Federal Investigative Standards. In this event, the contractor must provide, or cause each of its employees to provide, such security information to AXP. Failure to cooperate with security processing will result in an unfavorable suitability determination.

12. Contractor employees subject to the requirements of this clause must take the FAA Security Awareness Virtual Initiative (SAVI) training within 90 days of reporting to work and annually thereafter. This training is available on the FAA's Electronic Learning Management System (eLMS). Contractors without access to eLMS please see https://my.faa.gov/org/linebusiness/ash/programs/savi.html for instructions.

13. The contractor and/or subcontractor(s) must contact the CO, COR, and AXP within one business-day in the event an employee is arrested (i.e., taken into custody by law enforcement for any offenses, other than minor traffic offenses) or is involved in theft of government property or the Contractor becomes aware of any information that may raise a question about the suitability of a contractor employee.

14. Failure to submit information required by this clause within the time required may be determined by the CO a material breach of the contract, and may result in suspension or revoked access to FAA assets for the Contractor's employee.

15. If subsequent to the effective date of this contract, the security classification or security requirements under this contract are changed by the Government and if the changes cause an increase or decrease in direct contract costs or otherwise affect any other term or condition of this contract, the contract will be subject to an equitable adjustment.

16. The contractor agrees to insert terms that conform substantially to the language of this clause, excluding any reference to the Changes clause of this contract, in all subcontracts under this contract that involve access and where the exceptions under FAA Order 1600.72 do not apply.

(End of Clause)

3.14-4 ACCESS TO FAA FACILITIES, SYSTEMS, GOVERNMENT PROPERTY, AND SENSITIVE

INFORMATION (JAN 2019)

1. It may become necessary for the Government to grant access to FAA systems or issue Government property or sensitive information to contractor employees. Prior to or upon completion or termination of the work under the contract, the contractor must return all such Government property and sensitive information to the Contracting Officer's Representative (COR).

2. Reserved.

3. Improper use, possession or alteration of Government property is subject to penalties under Title 18, USC 499, 506, 701, and 1030.

4. In the event such Government property or sensitive information or is lost, stolen, or not returned, the contractor understands and agrees that the Government may, in addition to any other withholding provision of the contract, withhold the value of the asset for each item of Government property or sensitive information not returned. If the Government property or sensitive information is not returned within 30-calendar-days from the date the withholding action was initiated, any amount so withheld is forfeited by the contractor. Regarding FAA Personally Identifiable Information (PII) contained within portable devices that are lost, stolen, or not returned, the contractor must additionally report such a loss, theft, or non-return within one (1) hour to the FAA Security Operations Center (phone 1(866)-580-1852(Option 1) or email 9-AWA-SOC@faa.gov).

5. Access to aircraft ramp/hangar areas is authorized only to those persons displaying a flight line identification card and for vehicles, with a current ramp permit issued pursuant to Title 49, Part 1542, Code of Federal Regulations.

6. The Government retains the right to inspect inventory, or audit Government property or sensitive information issued to the contractor in connection with the contract and do so at the convenience of the Government. Any items not accounted for, to the satisfaction of the Government, will be assumed to be lost and the provisions of section (4) of this clause apply.

7. All Government property must be approved by the COR who will require the Contractor employee to sign a receipt for each item. Lost or stolen Government property or sensitive information must immediately be reported concurrently to the Contracting Officer (CO), COR, and the FAA SOC at the telephone number and email address listed under section (4) above.

8. Each Contract employee, during all times of on-site performance onboard an FAA facility, must prominently display his/her current and valid FAA Personal Identity Verification (PIV) card on the front portion of his/her body between the neck and waist. Each FAA PIV cardholder must not affix pins, stickers, or other item to the card.

9. Prior to any contractor employee obtaining a FAA PIV Card or other Government property, IAW FAA Order

1600.78 the contractor is required to:

a. Enter data for each employee into the VAP as described in AMS clause 3.14-2, Contractor Personnel Suitability Requirements.

b. The Office of Personnel Security (AXP) will determine whether final suitability can be granted due to:

i. Existence of a previous investigation that meets reciprocity requirements, or:

ii. Initiate the contractor applicant into the Electronic Questionnaires for Investigations Processing (eQIP) system so that the applicant can complete the investigative forms.

c. Interim suitability cannot be granted until the eQIP form is completed, and fingerprints and signature pages are submitted to AXP.

d. Authorization for the contractor employee to begin work will be an Interim or Final Suitability notification from

AXP.

10. To obtain a FAA PIV card, IAW FAA Order 1600.78 Contractor employee must:

a. Submit an identification Card Application (DOT 1681) using the automated system located at https://idms.faa.gov/1681. The application must be approved by the CO or to the COR.

b. The contractor employee will be notified when the identification card application has been approved and is ready for processing by the FAA Identification Card issuer (e.g., PIV Administrator).

c. The contractor must contact AXP to obtain the procedures for obtaining their FAA PIV Card.

11. Off-Boarding The contractor is responsible for ensuring final off-boarding is accomplished for all departing contractor employees. This includes termination, resignation, retirement, death, change of employment status (i.e., transferring from a contractor to a FAA employee), transfer to another FAA contract, and (with CO approval) extended leave of absence. The Contractor may appoint an off-boarding coordinator to oversee the off-boarding process.

a. For each departing employee having access to FAA facilities and/or Information Technology (IT) systems, the Contractor must submit a completely filled out and signed "FAA Contractor Employee Off-Boarding Checklist" (located in FAA Procurement Forms) to the CO no later than thirty (30) calendar days after the employee's departure. The Contractor must ensure that the Checklist confirms that all applicable Government property and sensitive information (including Classified National Security Information(CNSI)) has been collected and access to all FAA assets has been terminated.

b. When the Contractor is not collocated or within local driving distance of the responsible AXP office, the Contractor must collect the Personal Identity Verification (PIV) Card and any other tokens and provide to the CO or COR within one (1) business day of receiving the Card/tokens from the departing employee.

c. In event that the Contractor employee departs without completing the Checklist, the Contractor is responsible for completing and submitting the Checklist on the employee's behalf. If the departing Contractor employee served as the Property Custodian for the FAA contract, the Contractor must designate a new Property Custodian and ensure accountability of all property under the contract, or within fourteen calendar days with the CO's approval, provide to the CO the results of the associated inventory/property accountability.

d. The VAP must be updated within twenty-four (24) hours for the departing employee.

e. The Contractor must also comply with any local Employee Off-Boarding Checklists in use at FAA Facilities.

12. All contractors and subcontractor employees with access to FAA systems must have a FAA-issued Personal Identity Verification (PIV) card and must use the PIV card to authenticate to the FAA system. Approved contactor equipment or software in accordance with clause 3.14-13 "Use of Contractor Equipment or Software - Permitted" that connects to FAA systems must be configured to accept and use FAA-issued PIV cards. The contractor must provide the appropriate equipment for the PIV card, while the FAA will furnish and configure the PIV software.

13. The contractor must insert this clause in all subcontracts under the contract.

(End of Clause)

AC4548 EMERGENCY SITUATIONS AND EXERCISES DURING CONTRACT PERFORMANCE (JUL

2015)

(a) Emergency situations and exercises are temporary exceptions to the prohibition of contractor personnel not being subject to the direction and control of Government personnel when performing non-personal contract services in FAA facilities.

(b) All contractor personnel at a FAA work site or facility during an actual emergency shall conform to the procedures posted or directed by FAA officials responsible for emergency response at that site or facility. Such officials include evacuation wardens/monitors, security personnel, Emergency Readiness Officers, management, etc.

(c) Contractor personnel shall participate in all emergency exercises, including evacuations, as part of performance under this contract. On rare occasions and based on advance arrangements that are then announced at the time of an exercise, contractor personnel will be excused from evacuations.

(d) Contractor management/supervisors shall ensure that each contractor employee assigned work in FAA facilities possesses a general awareness of emergency and evacuation procedures at all locations where the employees might be during an emergency or exercise. Information on emergency procedures may be requested from the Contracting Officer’s Representative (COR) or a designated FAA contact point at the work site.

AC0135 INVOICING PROCEDURES - GENERAL (JAN 2017)

(a) In addition to the requirements set forth at AMS Clause 3.3.1-17, Prompt Payment, for the submission of a proper invoice, the contractor shall submit a separate invoice for (1) each month of performance of services, or (2) those items of supplies furnished, as follows:

(1) The original to: 9-AMC-AMZ-FAA-APInvoices@faa.gov (Preferred) or mail to:

DOT/FAA AMK-311/314

P.O. Box 25710

Oklahoma City, OK 73169-0710

(2) One Copy to 9-AMC-AMZ-FAA-APInvoices@faa.gov or:

FAA, Mike Monroney Aeronautical Center

Office of Acquisition Services (AAQ-(insert routing symbol))

P.O. Box 25082

Oklahoma City, OK 73l25

(3) One Copy to cilony.alejandro@faa.gov or:

FAA, Mike Monroney Aeronautical Center

TBD

P.O. Box []

Oklahoma City, OK 73l25

(b) Each invoice shall highlight the following information:

(1) Contract number and applicable Delivery Order number.

(2) Noun description of services and/or supplies, including applicable line item number(s) and quantity(s) that were provided.

(3) Extended totals for invoiced quantities.

(c) All contractors invoicing services to the FAA in labor hours shall maintain on file, and submit when required for verification or audit, certified time logs showing a daily start and ending work times, the daily total of productive hours charged to the contract, a daily entry for any non-productive work-hours and cumulative totals for each pay period.

AC4529 WARRANTY - COMMERCIAL PRODUCTS AND SERVICES (JUN 2006)

The contractor’s standard commercial…