Statement of Work Automatic Extractor.pdf
PDF 156 KB Posted
- Attached to
- AUTOMATIC EXTRACTION DEVICE
- Solicitation number
- 693C7325Q000013
About this file
This Statement of Work specifies requirements for an Automatic Extraction Device used to measure asphalt content in hot mix samples according to ASTM D 8159 standards. The device must be fully automated and capable of using methylene chloride or trichlorethylene reagents, operate without a chiller, and measure asphalt content in mixtures containing ground rubber tire or aramid fibers.
The technical requirements include 2 washing drums, 2 centrifuge cups, a solvent test kit, centrifuge cup papers, and all necessary safety equipment. The device must operate on standard U.S. power systems and accommodate 208V. Installation and setup are required at a facility in Sevierville, TN, with operational verification through sample testing to within +/- 0.1% accuracy. The supplier must provide comprehensive support via phone, email, and network, including initial training on maintenance, calibration, and safety procedures, with a one-year warranty. This procurement is part of a brand name justification for an Infratest USA GTR Model Asphalt Analyzer, being pursued by the Eastern Federal Lands Highway Division of the Federal Highway Administration.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
This statement of work is for the purchase of a Automatic Extraction Device used in ASTM D 8159. The Automatic Extraction Device is used to measure asphalt content of a hot mix sample. The results from this device will be used to provide asphalt content measures per agency requirements.
Specification/Requirements
A. Automatic Extraction Device Designed and meets ASTM D 8159 and all referenced documents of method ASTM D 8159.
• Fully automated as described in method with all apparatus of method.
• Must use of reagents required in ASTM D 8159 and must have the ability to use methylene chloride or Trichlorethylene.
• Must operate without with trichlorethylene and without chiller
• Ability to measure asphalt content of bituminous mixtures containing ground rubber tire or aramid fibers
• Operate with using TCE with only cold water feed.
B. Additional Equipment
• Total of 2 washing drums
• Total of 2 centrifuge cups
• Solvent Test Kit
• Centrifuge cup papers
• All equipment necessary for safe and practical usage of the automatic extraction device to complete method ASTM D 8159.
C. Electrical Requirements
1. Operate on standard U.S. power systems.
2. Accommodate 208V system.
D: Service & Support
1. Equipment installation and initial hardware/software setup required at the address below. Operation must be verified by performing test on sample created by EFL laboratories at exactly the prescribed Asphalt content and measure to within +/- 0.1% of the asphalt content the sample was produced to verify operations.
Address: 1827 Jack Delozier Dr.
Sevierville, TN 37876
2. Prior to installation and initial set up all maintenance, calibration and safety procedures must be explained to technician and laboratory manager.
3. The Automatic Extraction Device supplier must be capable of support through phone, e-mail, and network. Warranty for one year.
File details come from the government source that posted it. Updated .