QA_04-28-2025.pdf
PDF 59 KB Posted
- Solicitation number
- 69056725R000003
About this file
This document is a Questions and Answers (Q&A) file for the MT FLAP PARK 2021(1) Old Yellowstone Trail South Improvements & Preservation federal contract opportunity. The Q&A contains three technical questions related to the project specifications, specifically addressing FP-24 specifications, material gradation options, and plasticity index requirements. The questions were submitted and answered between 4/23/2025 and 4/28/2025, with responses indicating that: (1) FP-24 specification hard copies are not available for external users and must be accessed online, (2) the contract allows for gradation options F, G, or H when not specifically specified, and (3) there is no plasticity index requirement if Grading F is used for surface course aggregate.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QA_04-30-2025.pdf | ||
| Amendment A001.pdf | ||
| QA_04-29-2025.pdf | ||
| QA_04-24-2025.pdf | ||
| QA_04-23-2025.pdf | ||
| FLH Bridge oversized or overload vehicle permit request form.pdf | ||
| mta-park2021-1_control-points.xlsx | XLSX spreadsheet | |
| RFP_69056725R000003_MT FLAP PARK 2021(1).pdf | ||
| Physical Data.zip | ZIP file | |
| mta-park2021-1_Geotechnical report.pdf | ||
| mta-park2021-1_plans.pdf |
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MT FLAP PARK 2021(1)
Old Yellowstone Trail South Improvements & Preservation
# General Technical Question Answer Date
1 X
I see that Old Yellowstone Trail project is solicited under FP-24 specifications. Would we be able to purchase a few hared copies of these specs?
Unfortunately, we don't have hard copies available for external users. The FP-24 hard copies are for FLH employee use.
Contactors can use the online version or print their own from the electronic file. The
FP-24 is available online at:
https://highways.dot.gov/federal-lands/specs.
4/23/2025
2 X
SCR section 301 table 301-1 references
703.05(b)&(c) for gradation which references table 703-1. There are three options for gradation F, G, H. Are all three acceptable options for the contract or is there a specific preference?
FP-24 allows for all for gradations F, G, or H when none is specified. Please submit bids according to the solicitation documents.
4/24/2025
3 X
Item A0260 does not carry a grading designation within the contract to apply the appropriate specification for the material.
Previously it was answered that any one of the types of grading was allowable under this contract. The FP-24, however, does not provide a plasticity index for grading F under the surface course aggregate. If grading F is selected is no plasticity index adherence required? Please advise.
There is no plasticity index requirement that needs to be met if Grading F is used.
4/28/2025
Check General or Technical
File details come from the government source that posted it. Updated .