Amendment_A003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

N/A

PAGE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE NO. 5. PROJECT NO. (If applicable)

A003 10/17/2018 N/A WA RIDGE MAIN (1), MAIN AVENUE

ACCESS IMPROVEMENTS

6. ISSUED BY CODE N/A 7. ADMINISTERED BY (If other than Item 6) CODE N/A

Department of Transportation Federal Highway Administration 610 East Fifth Street Vancouver WA 98661-3801

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and Zip Code) 9A. AMENDMENT OF SOLICITATION NO.

X 69056718B000010

9B. DATED (SEE ITEM 11)

09/18/2018

10A. MODIFICATION OF CONTRACT/ORDER NO.

N/A

10B. DATED (SEE ITEM 13)

CODE: N/A FACILITY CODE: N/A

N/A

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

| X | The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

(__ ) is extended, ( x ) is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

N/A

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A THIS CHANGE ORDER IS ISSUED PURSUANT TO (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN

ITEM 10A.

N/A

B THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (Such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

N/A

C THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

N/A

D OTHER (Specify type of modification and authority)

N/A

E. IMPORTANT: Contractor n/a is not, n/a is required to sign this document and return n/a copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

WA RIDGE MAIN (1), MAIN AVENUE ACCESS IMPROVEMENTS

See page 2

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15a. NAME AND TITLE OF SIGNER (Type or print) 15a. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

N/A

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY_________________________________________ BY N/A___________________________ N/A (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITION NOT USABLE

30-105 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

Amendment No. A003, dated 10/17/2018 WA RIDGE MAIN (1) Solicitation No. 69056718B000010 MAIN AVENUE ACCESS IMPROVEMENT

REVISIONS ARE AS FOLLOWS:

BID SCHEDULE

Pages A-7 through A-12. Replaces entire bid schedule

Page A-8. Deletes pay item 15701-0000 Soil Erosion Control, SWPPP Monitoring

Page A-11. Deletes the following pay items:

63502-0600 Temporary Traffic Control, Barricade Type 3 63502-2000 Temporary Traffic Control, Portable Changeable Message Sign 63503-1000 Temporary Traffic Control, Plastic Fence

Page A-12. Deletes the following pay items:

63504-1000 Temporary Traffic Control, Construction Sign 63507-0700 Temporary Traffic Control, Traffic Control Supervisor 63509-1000 Temporary Traffic Control, Flagger

CONTRACT CLAUSES

CONTRACT CLAUSES

Page C-18 Revises FAR Clause 52.211-10 Commencement, and Completion of Work (Apr 1984) Alternate I (Apr 1984

Page C-81. Revises FAR Clause 52.236-4 Physical Data (Apr 1984).

MINIMUM WAGE SCHEDULE

Page D-1 through D-42. Updates Davis-Bacon General Wage Decision Number WA180001 to current effective date of 10/12/2018.

SPECIAL CONTRACT REQUIREMENTS

Page E-16, Subsection 107.10(e), Other requirements. Revises subsection number.

Deletes requirements from Paragraph (1).

Page E-17, Subsection 107.10(d), Other requirements. Adds paragraph (8).

Page E-18, Subsection 108.03, Determination and Extension of Contract Time.

Deletes requirements.

Page E-47 through E-49, Subsection 157.10, Diversions. Modifies requirements.

Page F-20 through F-26, Subsection 552.11(b)(6), Precast elements.

Deletes requirements.

Notice to Bidders: Please submit revised pages A-7 through A-12 with your bid.

Amendment No. A003, dated 10/17/2018 WA RIDGE MAIN (1) Solicitation No. 69056718B000010 MAIN AVENUE ACCESS IMPROVEMENT

Page F-33, Subsection 602.03(b) Submittals, Deletes requirements.

Page F-51, Subsection 626.13 Plant Establishment Period, Deletes requirements.

Page F-51, Subsection 626.14 Acceptance, Modifies requirements.

PLANS

Plan sheet B.1 Deletes pay item

Plan sheet B.3 Deletes pay items

Plan Sheet D.1 Revises tabulation of Fence Quantity

Plan Sheet F.1 Revises tabulation of Erosion Control Quantities

Plan Sheet G.17 Revises Culvert Riprap Details

Plan Sheet G.18 Revises Large Precast Concrete Arch-Culvert Details

Plan Sheet J.2 Revises Utility Plan

Plan Sheet L.1 Revises Tabulation of Temporary Traffic Control Quantities

ENCLOSURES

Pages:

A-7 through A-12 C-81 E-16 through E-18 F-47 through F-49 F-20 through F-26 F-33 F-51

Plan Sheets:

B.1 B.3 D.1 F.1 G.17 through G.18 J.2 L.1

A-7

Bid Schedule

Project: WA RIDGE MAIN(1)

Main Avenue Access Improvements

Bidders please note: Before preparing the bid, carefully read the Solicitation Provisions.

Insert a unit bid price, in figures, for each pay item for which a quantity appears in the bid schedule. Multiply the unit bid price by the quantity for each pay item and show the amount bid. Should any mathematical check made by the Government show a mistake in the amount bid, the Amount Bid for the item will be based on the Unit Bid Price.

When a “LPSM” (Lump Sum) appears as a unit bid price, insert an amount for each lump sum pay item.

When a sum based on a fixed rate appears for any pay item in the amount bid column, include the Government inserted amount bid for the item in the total bid amount.

Total the amounts bid for all pay items and insert the total bid amount.

david.l.mariman Polygonal Line david.l.mariman Typewritten Text david.l.mariman Typewritten Text Revised by Amendment A003

A-8

B I D S C H E D U L E Account: ALL

Project No: WA RIDGE MAIN (1)

Name: MAIN AVENUE ACCESS IMPROVEMENTS CQ = "Contract Quantity"

Item No. Quantity Unit Unit Price Amount

15101-0000

Line A0020 ALL LPSM $

15201-0000

Line A0040 ALL LPSM $

15301-0000

Line A0060 ALL LPSM $

15401-0000

Line A0080 ALL LPSM $

15501-0000

Line A0100 ALL LPSM $

15701-0000

Line A0120 1 LPSM [3] $ $

15705-0100

Line A0140 1,860 LNFT $ $

15705-1400

Line A0160 4,650 LNFT $ $

15706-0200

Line A0180 19 EACH $ $

15706-1000

Line A0200 7 EACH $ $

15706-1600

Line A0220 1 EACH $ $

15706-2200

Line A0240 1 EACH $ $

15801-0000

Line A0260 100 MGAL $ $

20101-0000

Line A0280 3.8 ACRE (CQ) $ $

20301-2400

Line A0300 10 EACH $ $

20304-1000

Line A0320 ALL LPSM $

20401-0000

Line A0340 2,538 CUYD (CQ) $ $

MOBILIZATION

CONSTRUCTION SURVEY AND STAKING

CONTRACTOR QUALITY CONTROL

CONTRACTOR TESTING

CONSTRUCTION SCHEDULE

SOIL EROSION CONTROL, SWPPP MONITORING

WATERING FOR DUST CONTROL

CLEARING AND GRUBBING

REMOVAL OF SIGN

SOIL EROSION CONTROL, SILT FENCE

SOIL EROSION CONTROL, FIBER ROLL

SOIL EROSION CONTROL, CHECK DAM

SOIL EROSION CONTROL, INLET PROTECTION

SOIL EROSION CONTROL, STABILIZED CONSTRUCTION EXIT

SOIL EROSION CONTROL, FILTER BAG

REMOVAL OF STRUCTURES AND OBSTRUCTIONS, GEE CREEK

ROADWAY EXCAVATION

Schedule Total: __________________________

Submitted by: ___________________________ david.l.mariman Rectangle david.l.mariman Rectangle david.l.mariman Line david.l.mariman Typewritten Text david.l.mariman Polygonal Line david.l.mariman Typewritten Text david.l.mariman Line david.l.mariman Typewritten Text Revised by Amendment A003 david.l.mariman Polygonal Line david.l.mariman Typewritten Text david.l.mariman Line david.l.mariman Line

A-9

Account: ALL

Project No: WA RIDGE MAIN (1)

Name: MAIN AVENUE ACCESS IMPROVEMENTS CQ = "Contract Quantity"

Item No. Quantity Unit Unit Price Amount

Schedule Total: __________________________

Submitted by: ___________________________

20403-0000

Line A0360 25,792 CUYD (CQ) $ $

20411-0000

Line A0380 5,045 TON $ $

25101-0200

Line A0400 140 CUYD $ $

25101-0300

Line A0420 160 CUYD $ $

25101-0400

Line A0440 1,640 CUYD $ $

25120-0000

Line A0460 430 LNFT $ $

26101-0000

Line A0480 1,370 SQFT $ $

30202-2000

Line A0500 2,270 TON $ $

31302-0400

Line A0520 155 SQYD $ $

40301-0100

Line A0540 1,220 TON $ $

60201-0400

Line A0560 169 LNFT $ $

60201-0600

Line A0580 28 LNFT $ $

60201-0800

Line A0600 622 LNFT $ $

60201-2300

Line A0620 115 LNFT $ $

60216-0000

Line A0640 74 LNFT (CQ) $ $

60401-0000

Line A0660 3 EACH $ $

60404-0000

Line A0680 2 EACH $ $

120-INCH PIPE CULVERT

LARGE PRECAST CONCRETE ARCH CULVERT, 40-FT SPAN x 29-FT± RISE

MANHOLE, 48-INCH DIAMETER

SELECT BORROW

PLACED RIPRAP, METHOD A, CLASS 2

PLACED RIPRAP, METHOD A, CLASS 3

ROADWAY AGGREGATE, METHOD 2

AGGREGATE-TOPSOIL COURSE, 4-INCH DEPTH

ASPHALT CONCRETE PAVEMENT, TYPE 1

12-INCH PIPE CULVERT

18-INCH PIPE CULVERT

24-INCH PIPE CULVERT

PLACED RIPRAP, METHOD A, CLASS 4

RIPRAP DITCH, METHOD A, FILTER ROCK

REINFORCED SOIL SLOPE

UNCLASSIFIED BORROW

CATCH BASIN, COMBINATION INLET, TYPE 1

david.l.mariman Rectangle david.l.mariman Typewritten Text Revised by Amendment A003 david.l.mariman Polygonal Line david.l.mariman

A-10

Account: ALL

Project No: WA RIDGE MAIN (1)

Name: MAIN AVENUE ACCESS IMPROVEMENTS CQ = "Contract Quantity"

Item No. Quantity Unit Unit Price Amount

Schedule Total: __________________________

Submitted by: ___________________________

60404-0000

Line A0700 1 EACH $ $

60404-0000

Line A0720 1 EACH $ $

60404-0000

Line A0740 1 EACH $ $

60902-1000

Line A0760 1,300 LNFT $ $

61101-0000

Line A0780 ALL LPSM $

61102-3250

Line A0800 1,730 LNFT $ $

61106-0000

Line A0820 1 EACH $ $

61109-5000

Line A0840 2 EACH $ $

61202-0100

Line A0860 2,005 LNFT $ $

61501-0100

Line A0880 1,060 SQYD $ $

61501-1100

Line A0900 1,305 SQYD $ $

61701-1950

Line A0920 1,500 LNFT $ $

61702-0400

Line A0940 2 EACH $ $

61702-0800

Line A0960 6 EACH $ $

61901-1300

Line A0980 65 LNFT $ $

61902-0000

Line A1000 2 EACH $ $

62403-0000

Line A1020 960 CUYD $ $

CATCH BASIN, AREA INLET

CURB AND GUTTER, CONCRETE, 12-INCH DEPTH

WATER SYSTEM, TEMPORARY WATER SERVICE

8-INCH WATERLINE, DUCTILE IRON, CLASS 52

FIRE HYDRANT

RELOCATE WATER METER

CATCH BASIN, COMBINATION INLET, TYPE 2

CATCH BASIN, DITCH INLET

FENCE, CHAIN LINK

GATE, POST AND CHAIN

FURNISHING AND PLACING TOPSOIL

4-INCH SEWER LINE, PLASTIC, C900

SIDEWALK, CONCRETE

SIDEWALK, ASPHALT

GUARDRAIL SYSTEM G4, TYPE 4, CLASS B STEEL POSTS, WSDOT TYPE 31

TERMINAL SECTION, TYPE G4-CRT

TERMINAL SECTION TYPE TANGENT, WSDOT TYPE 31

david.l.mariman Rectangle david.l.mariman Typewritten Text Revised by Amendment A003 david.l.mariman Polygonal Line david.l.mariman

A-11

Account: ALL

Project No: WA RIDGE MAIN (1)

Name: MAIN AVENUE ACCESS IMPROVEMENTS CQ = "Contract Quantity"

Item No. Quantity Unit Unit Price Amount

Schedule Total: __________________________

Submitted by: ___________________________

62501-0000

Line A1040 0.5 ACRE $ $

62501-0000

Line A1060 2.5 ACRE $ $

62630-0400

Line A1080 375 EACH $ $

62630-0400

Line A1100 375 EACH $ $

62630-0400

Line A1120 375 EACH $ $

62630-0400

Line A1140 375 EACH $ $

62635-1000

Line A1160 200 EACH $ $

62635-3000

Line A1180 650 EACH $ $

62635-3000

Line A1200 1,020 EACH $ $

62901-0000

Line A1220 310 SQYD $ $

63301-0000

Line A1240 8 EACH $ $

63316-1000

Line A1260 6 EACH $ $

63401-0300

Line A1280 2,600 LNFT $ $

63501-0000

Line A1300 ALL LPSM $

63502-0600

Line A1320 0 EACH [3] $ $

63502-2000

Line A1340 0 EACH [3] $ $

63503-1000

Line A1360 0 LNFT [3] $ $

TURF ESTABLISHMENT, WETLAND ZONE

TURF ESTABLISHMENT, UPLAND ZONE

PLANTINGS, WETLAND PLANT, CONTAINER GROWN, SLOUGH SEDGE

ROLLED EROSION CONTROL PRODUCT

SIGN SYSTEM

REMOVE AND RESET SIGN

PAVEMENT MARKINGS, TYPE B, SOLID

TEMPORARY TRAFFIC CONTROL

TEMPORARY TRAFFIC CONTROL, BARRICADE TYPE 3

PLANTINGS, WETLAND PLANT, CONTAINER GROWN, COLUMBIA SEDGE

PLANTINGS, WETLAND PLANT, CONTAINER GROWN, WOOLY SEDGE

PLANTINGS, WETLAND PLANT, CONTAINER GROWN, SHORT SCALE SEDGE

CUTTINGS, COTTONWOOD POLE

CUTTINGS, WILLOW POLE, ROOTED

CUTTINGS, WILLOW POLE

TEMPORARY TRAFFIC CONTROL, PORTABLE CHANGEABLE MESSAGE SIGN

TEMPORARY TRAFFIC CONTROL, PLASTIC FENCE

david.l.mariman Rectangle david.l.mariman Rectangle david.l.mariman Rectangle david.l.mariman Rectangle david.l.mariman Polygonal Line david.l.mariman Polygonal Line david.l.mariman Polygonal Line david.l.mariman Typewritten Text david.l.mariman Typewritten Text david.l.mariman Typewritten Text david.l.mariman Line david.l.mariman Line david.l.mariman Line david.l.mariman Line david.l.mariman Line david.l.mariman Line david.l.mariman Line david.l.mariman Typewritten Text Revised by Amendment A003 david.l.mariman Polygonal Line david.l.mariman

A-12

Account: ALL

Project No: WA RIDGE MAIN (1)

Name: MAIN AVENUE ACCESS IMPROVEMENTS CQ = "Contract Quantity"

Item No. Quantity Unit Unit Price Amount

Schedule Total: __________________________

Submitted by: ___________________________

63504-1000

Line A1380 0 SQFT [3] $ $

63507-0700

Line A1400 0 DAY [3] $ $

63509-1000

Line A1420 0 FXHR [3] 59.00$ -$

63610-0000

Line A1440 855 LNFT $ $

63622-0000

Line A1460 2,145 LNFT $ $

64603-0200

Line A1480 2 EACH $ $

64703-3010

Line A1500 5 EACH $ $

64703-5000

Line A1520 5 EACH $ $

64704-1000

Line A1540 1,175 CUYD $ $

64706-1000

Line A1560 1,480 SQYD (CQ) $ $

UTILITY TRENCH

FIXTURE, MAILBOX

MITIGATION, ROCK WEIR

MITIGATION, ROOT WAD

MITIGATION, STREAMBED MATERIAL

MITIGATION, WETLANDS MITIGATION

TEMPORARY TRAFFIC CONTROL, CONSTRUCTION SIGN

TEMPORARY TRAFFIC CONTROL, TRAFFIC CONTROL SUPERVISOR

TEMPORARY TRAFFIC CONTROL, FLAGGER

CONDUIT, DIRECTIONAL BORE

david.l.mariman Rectangle david.l.mariman Rectangle david.l.mariman Rectangle david.l.mariman Rectangle david.l.mariman Polygonal Line david.l.mariman Polygonal Line david.l.mariman Polygonal Line david.l.mariman Typewritten Text david.l.mariman Typewritten Text david.l.mariman Typewritten Text david.l.mariman Line david.l.mariman Line david.l.mariman Line david.l.mariman Line david.l.mariman Line david.l.mariman Line david.l.mariman Line david.l.mariman Typewritten Text Revised by Amendment A003 david.l.mariman Polygonal Line david.l.mariman

C-18

Contract Clauses Revised by Amendment A003 Project: WA RIDGE MAIN (1), MAIN AVENUE ACCESS IMPROVEMENTS

(2) Determine the extent to which commercial items or nondevelopmental items could be incorporated at the component level.

52.211-10 Commencement, Prosecution, and Completion of Work (Apr 1984) Alternate I (Apr 1984)

The Contractor shall be required to (a) commence work under this contract within 10 calendar days after the date the Contractor receives the notice to proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than 10/04/2019 subject to such extensions as may be authorized. The time stated for completion shall include final cleanup of the premises.

The completion date is based on the assumption that the successful offeror will receive the notice to proceed by 12/1017/2018. The completion date will be extended by the number of calendar days after the above date that the contractor receives the notice to proceed, except to the extent that the delay in issuance of the notice to proceed results from the failure of the contractor to execute the contract and give the required performance and payment bonds within the time specified in the offer.

52.211-12 Liquidated Damages—Construction (Sep 2000)

(a) If the Contractor fails to complete the work within the time specified in the contract, the Contractor shall pay liquidated damages to the Government in the amount of: See Special Contract Requirements, Subsection 108.04.

(b) If the Government terminates the Contractor’s right to proceed, liquidated damages will continue to accrue until the work is completed. These liquidated damages are in addition to excess costs of repurchase under the Termination clause.

52.211-18 Variation in Estimated Quantity (Apr 1984)

If the quantity of a unit-priced item in this contract is an estimated quantity and the actual quantity of the unit-priced item varies more than 15 percent above or below the estimated quantity, an equitable adjustment in the contract price shall be made upon demand of either party. The equitable adjustment shall be based upon any increase or decrease in costs due solely to the variation above 115 percent or below 85 percent of the estimated quantity. If the quantity variation is such as to cause an increase in the time necessary for completion, the Contractor may request, in writing, an extension of time, to be received by the Contracting Officer within 10 days from the beginning of the delay, or within such further period as may be granted by the Contracting Officer before the date of final settlement of the contract.

Upon the receipt of a written request for an extension, the Contracting Officer shall ascertain the facts and make an adjustment for extending the completion date as, in the judgment of the Contracting Officer, is justified.

52.214-26 Audit and Records – Sealed Bidding (Oct 2010)

(a) As used in this clause, “records” includes books, documents, accounting procedures and practices, and other data, regardless of type and regardless of whether such items are in written form, in the form of computer data, or in any other form.

(b) Certified cost or pricing data. If the Contractor has been required to submit certified cost or pricing data in connection with the pricing of any modification to this contract, the Contracting Officer, or an authorized representative of the Contracting Officer, in order to evaluate the accuracy completeness, and currency of the certified cost or pricing data, shall have the right to examine and audit all of the Contractor’s records, including computations and projections, related to—

(1) The proposal for the modification;

(2) The discussions conducted on the proposal(s), including those related to negotiating;

(2) Mitigation_Site

(3) SWPPP WA RIDGE MAIN(1) Main Avenue Access Improvements

(4) WA RIDGE MAIN (1)_Cross Sections

(5) WA RIDGE MAIN(1) Hydraulic Report

(6) WA_RIDGE_MAIN_FINAL

(7) WA-a2015008_EW

(8) Utility relocation agreement NW Natural

(9) WA_RIDGE_MAIN_FINAL_10-12-18

(10) WA_RIDGE_MAIN_FINAL_10-12-18

52.236-5 Material and Workmanship (Apr 1984)

(a) All equipment, material, and articles incorporated into the work covered by this contract shall be new and of the most suitable grade for the purpose intended, unless otherwise specifically provided in this contract. References in the specifications to equipment, material, articles, or patented processes by trade name, make, or catalog number, shall be regarded as establishing a standard of quality and shall not be construed as limiting competition. The Contractor may, at its option, use any equipment, material, article, or process that, in the judgment of the Contracting Officer, is equal to that named in the specifications, unless otherwise specifically provided in this contract.

(b) The Contractor shall obtain the Contracting Officer’s approval of the machinery and mechanical and other equipment to be incorporated into the work. When requesting approval, the Contractor shall furnish to the Contracting Officer the name of the manufacturer, the model number, and other information concerning the performance, capacity, nature, and rating of the machinery and mechanical and other equipment. When required by this contract or by the Contracting Officer, the Contractor shall also obtain the Contracting Officer’s approval of the material or articles which the Contractor contemplates incorporating into the work. When requesting approval, the Contractor shall provide full information concerning the material or articles. When directed to do so, the Contractor shall submit samples for approval at the Contractor’s expense, with all shipping charges prepaid. Machinery, equipment, material, and articles that do not have the required approval shall be installed or used at the risk of subsequent rejection.

(c) All work under this contract shall be performed in a skillful and workmanlike manner. The Contracting Officer may require, in writing, that the Contractor remove from the work any employee the Contracting Officer deems incompetent, careless, or otherwise objectionable.

52.236-6 Superintendence by the Contractor (Apr 1984)

At all times during performance of this contract and until the work is completed and accepted, the Contractor shall directly superintend the work or assign and have on the worksite a competent superintendent who is satisfactory to the Contracting Officer and has authority to act for the Contractor.

52.236-7 Permits and Responsibilities (Nov 1991)

The Contractor shall, without additional expense to the Government, be responsible for obtaining any necessary licenses and permits, and for complying with any Federal, State, and municipal laws, codes, and regulations applicable to the performance of the work. The Contractor shall also be responsible for all damages to persons or property that occur as a result of the Contractor’s fault or negligence. The Contractor shall also be responsible for all materials delivered and work performed until completion and acceptance of the entire work, except for any completed unit of work which may have been accepted under the contract.

52.236-8 Other Contracts (Apr 1984)

C-81

Contract Clauses Revised by Amendment A003 Projectect: WA RIDGE MAIN (1), MAIN AVENUE ACCESS IMPROVEMENTS

D - 1

General Wage Decision Revised by Amendment A003

General Decision Number: WA180001 10/12/2018 WA1

Superseded General Decision Number: WA20170001

State: Washington

Construction Type: Highway

Counties: Washington Statewide.

HIGHWAY (Excludes D.O.E. Hanford Site in Benton and Franklin Counties)

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/05/2018 1 01/12/2018 2 02/23/2018 3 03/16/2018 4 06/29/2018 5 08/10/2018 6 09/14/2018 7 09/21/2018 8 10/12/2018

* CARP0001-008 06/01/2018

Rates Fringes

CARPENTER

GROUP 1.....................$ 39.75 16.93

GROUP 2.....................$ 43.42 18.44

GROUP 3.....................$ 33.41 16.14

GROUP 4.....................$ 32.32 16.14

GROUP 5.....................$ 87.73 16.93

GROUP 6.....................$ 36.58 16.14

GROUP 7.....................$ 39.75 16.93

GROUP 8.....................$ 16.93 16.14

GROUP 9.....................$ 40.58 16.14

D - 2

General Wage Decision Revised by Amendment A003

CARPENTER & DIVER CLASSIFICATIONS:

GROUP 1: Carpenter

GROUP 2: Millwright, machine erector

GROUP 3: Piledriver - includes driving, pulling, cutting, placing collars, setting, welding, or creosote treated material, on all piling

GROUP 4: Bridge carpenters

GROUP 5: Diver Wet

GROUP 6: Diver Tender, Manifold Operator, ROV Operator

GROUP 7: Diver Standby, Bell/Vehicle or Submersible operator Not Under Pressure

GROUP 8: Assistant Tender, ROV Tender/Technician

GROUP 9: Manifold Operator-Mixed Gas

ZONE PAY:

ZONE 1 0-40 MILES FREE

ZONE 2 41-65 MILES $2.25/PER HOUR

ZONE 3 66-100 MILES $3.25/PER HOUR

ZONE 4 OVER 100 MILES $4.75/PER HOUR

DISPATCH POINTS:

CARPENTERS/MILLWRIGHTS: PASCO (515 N Neel Street) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS/PILEDRIVER: SPOKANE (127 E. AUGUSTA AVE.) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS: WENATCHEE (27 N. CHELAN) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS: COEUR D' ALENE (1839 N. GOVERNMENT WAY) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS: MOSCOW (302 N. JACKSON) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

DEPTH PAY FOR DIVERS BELOW WATER SURFACE:

50-100 feet $2.00 per foot 101-150 feet $3.00 per foot 151-220 feet $4.00 per foot 221 feet and deeper $5.00 per foot

D - 3

General Wage Decision Revised by Amendment A003

PREMIUM PAY FOR DIVING IN ENCLOSURES WITH NO VERTICAL ASCENT:

0-25 feet Free 26-300 feet $1.00 per Foot

SATURATION DIVING:

The standby rate applies until saturation starts. The saturation diving rate applies when divers are under pressure continuously until work task and decompression are complete. the diver rate shall be paid for all saturation hours.

WORK IN COMBINATION OF CLASSIFICATIONS:

Employees working in any combination of classifications within the diving crew (except dive supervisor) in a shift are paid in the classification with the highest rate for that shift.

HAZMAT PROJECTS:

Anyone working on a HAZMAT job (task), where HAZMAT certification is required, shall be compensated at a premium, in addition to the classification working in as follows:

LEVEL D + $.25 per hour - This is the lowest level of protection. No respirator is used and skin protection is minimal.

LEVEL C + $.50 per hour - This level uses an air purifying respirator or additional protective clothing.

LEVEL B + $.75 per hour - Uses same respirator protection as Level A. Supplied air line is provided in conjunction with a chemical "splash suit".

LEVEL A +$1.00 per hour - This level utilizes a fully encapsulated suit with a self-contained breathing apparatus or a supplied air line.

CARP0003-006 10/01/2011

SOUTHWEST WASHINGTON: CLARK, COWLITZ, KLICKITAT,

LEWIS(Piledriver only), PACIFIC (South of a straight line made by extending the north boundary line of Wahkiakum County west to Willapa Bay to the Pacific Ocean), SKAMANIA AND WAHKIAKUM COUNTIES and INCLUDES THE ENTIRE PENINSULA WEST OF WILLAPA BAY

SEE ZONE DESCRIPTION FOR CITIES BASE POINTS

ZONE 1:

Rates Fringes

Carpenters:

D - 4

General Wage Decision Revised by Amendment A003

CARPENTERS..................$ 32.04 14.18

DIVERS TENDERS..............$ 36.34 14.18

DIVERS......................$ 77.08 14.18

DRYWALL.....................$ 27.56 14.18

MILLWRIGHTS.................$ 32.19 14.18

PILEDRIVERS.................$ 33.04 14.18

DEPTH PAY:

50 TO 100 FEET $1.00 PER FOOT OVER 50 FEET

101 TO 150 FEET $1.50 PER FOOT OVER 101 FEET

151 TO 200 FEET $2.00 PER FOOT OVER 151 FEET

Zone Differential (Add up Zone 1 rates):

Zone 2 - $0.85 Zone 3 - 1.25 Zone 4 - 1.70 Zone 5 - 2.00 Zone 6 - 3.00

BASEPOINTS: ASTORIA, LONGVIEW, PORTLAND, THE DALLES, AND

VANCOUVER, (NOTE: All dispatches for Washington State Counties: Cowlitz, Wahkiakum and Pacific shall be from Longview Local #1707 and mileage shall be computed from that point.)

ZONE 1: Projects located within 30 miles of the respective city hall of the above mentioned cities ZONE 2: Projects located more than 30 miles and less than 40 miles of the respective city of the above mentioned cities ZONE 3: Projects located more than 40 miles and less than 50 miles of the respective city of the above mentioned cities ZONE 4: Projects located more than 50 miles and less than 60 miles of the respective city of the above mentioned cities.

ZONE 5: Projects located more than 60 miles and less than 70 miles of the respective city of the above mentioned cities ZONE 6: Projects located more than 70 miles of the respected city of the above mentioned cities

CARP0770-003 06/01/2015

Rates Fringes

CARPENTER

CENTRAL WASHINGTON:

CHELAN, DOUGLAS (WEST OF

THE 120TH MERIDIAN),

KITTITAS, OKANOGAN (WEST

OF THE 120TH MERIDIAN) AND

YAKIMA COUNTIES

CARPENTERS ON CREOSOTE

MATERIAL...................$ 40.46 13.66

CARPENTERS.................$ 40.36 13.66

DIVERS TENDER..............$ 35.02 14.00

DIVERS.....................$ 73.44 14.00

MILLWRIGHT AND MACHINE

ERECTORS...................$ 41.86 13.66

D - 5

General Wage Decision Revised by Amendment A003

PILEDRIVER, DRIVING,

PULLING, CUTTING, PLACING

COLLARS, SETTING, WELDING

OR CRESOTE TREATED

MATERIAL, ALL PILING.......$ 40.61 13.66

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - ALL

CLASSIFICATIONS EXCEPT MILLWRIGHTS AND PILEDRIVERS

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Seattle Olympia Bellingham Auburn Bremerton Anacortes Renton Shelton Yakima Aberdeen-Hoquiam Tacoma Wenatchee Ellensburg Everett Port Angeles Centralia Mount Vernon Sunnyside Chelan Pt. Townsend

Zone Pay:

0 -25 radius miles Free 26-35 radius miles $1.00/hour 36-45 radius miles $1.15/hour 46-55 radius miles $1.35/hour Over 55 radius miles $1.55/hour

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - MILLWRIGHT

AND PILEDRIVER ONLY)

Hourly Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center

Zone Pay:

0 -25 radius miles Free 26-45 radius miles $ .70/hour Over 45 radius miles $1.50/hour

CARP0770-006 06/01/2016

Rates Fringes

CARPENTER

WESTERN WASHINGTON:

CLALLAM, GRAYS HARBOR,

ISLAND, JEFFERSON, KING,

KITSAP, LEWIS (excludes piledrivers only), MASON, PACIFIC (North of a straight line made by extending the north boundary line of Wahkiakum County west to the Pacific Ocean), PIERCE, SAN JUAN, SKAGIT, SNOHOMISH, D - 6

General Wage Decision Revised by Amendment A003

THURSTON AND WHATCOM

COUNTIES

BRIDGE CARPENTERS..........$ 40.92 14.59

CARPENTERS ON CREOSOTE

MATERIAL...................$ 40.46 13.66

CARPENTERS.................$ 40.92 14.59

DIVERS TENDER..............$ 44.67 13.66

DIVERS.....................$ 93.56 13.66

MILLWRIGHT AND MACHINE

ERECTORS...................$ 41.86 13.66

PILEDRIVER, DRIVING,

PULLING, CUTTING, PLACING

COLLARS, SETTING, WELDING

OR CRESOTE TREATED

MATERIAL, ALL PILING.......$ 40.61 13.66

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - ALL

CLASSIFICATIONS EXCEPT MILLWRIGHTS AND PILEDRIVERS

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Seattle Olympia Bellingham Auburn Bremerton Anacortes Renton Shelton Yakima Aberdeen-Hoquiam Tacoma Wenatchee Ellensburg Everett Port Angeles Centralia Mount Vernon Sunnyside Chelan Pt. Townsend

Zone Pay:

0 -25 radius miles Free 26-35 radius miles $1.00/hour 36-45 radius miles $1.15/hour 46-55 radius miles $1.35/hour Over 55 radius miles $1.55/hour

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - MILLWRIGHT

AND PILEDRIVER ONLY)

Hourly Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center

Zone Pay:

0 -25 radius miles Free 26-45 radius miles $ .70/hour Over 45 radius miles $1.50/hour

ELEC0046-001 02/05/2018

CALLAM, JEFFERSON, KING AND KITSAP COUNTIES

CABLE SPLICER....................$ 46.87 3%+15.96

D - 7

General Wage Decision Revised by Amendment A003

ELECTRICIAN......................$ 50.09 3%+20.21

* ELEC0048-003 01/01/2018

CLARK, KLICKITAT AND SKAMANIA COUNTIES

Rates Fringes

CABLE SPLICER....................$ 44.22 21.50

ELECTRICIAN......................$ 42.60 22.75

HOURLY ZONE PAY:

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Portland, The Dalles, Hood River, Tillamook, Seaside and Astoria

Zone Pay:

Zone 1: 31-50 miles $1.50/hour Zone 2: 51-70 miles $3.50/hour Zone 3: 71-90 miles $5.50/hour Zone 4: Beyond 90 miles $9.00/hour

*These are not miles driven. Zones are based on Delorrne Street Atlas USA 2006 plus.

ELEC0048-029 01/01/2018

COWLITZ AND WAHKIAKUM COUNTY

Rates Fringes

CABLE SPLICER....................$ 44.22 21.50

ELECTRICIAN......................$ 42.60 22.75

ELEC0073-001 01/01/2018

ADAMS, FERRY, LINCOLN, PEND OREILLE, SPOKANE, STEVENS, WHITMAN

COUNTIES

CABLE SPLICER....................$ 34.10 16.68

ELECTRICIAN......................$ 33.25 18.40

ELEC0076-002 01/01/2018

GRAYS HARBOR, LEWIS, MASON, PACIFIC, PIERCE, AND THURSTON

D - 8

General Wage Decision Revised by Amendment A003

CABLE SPLICER....................$ 40.05 24.49

ELECTRICIAN......................$ 40.78 23.01

ELEC0112-005 06/01/2018

ASOTIN, BENTON, COLUMBIA, FRANKLIN, GARFIELD, KITTITAS, WALLA

WALLA, YAKIMA COUNTIES

CABLE SPLICER....................$ 45.68 20.60

ELECTRICIAN......................$ 43.50 20.54

ELEC0191-003 06/01/2018

ISLAND, SAN JUAN, SNOHOMISH, SKAGIT AND WHATCOM COUNTIES

Rates Fringes

CABLE SPLICER....................$ 44.23 17.73

ELECTRICIAN......................$ 44.95 21.42

ELEC0191-004 06/01/2018

CHELAN, DOUGLAS, GRANT AND OKANOGAN COUNTIES

Rates Fringes

CABLE SPLICER....................$ 40.82 17.63

ELECTRICIAN......................$ 42.45 21.34

ENGI0302-003 06/01/2017

CHELAN (WEST OF THE 120TH MERIDIAN), CLALLAM, DOUGLAS (WEST OF

THE 120TH MERIDIAN), GRAYS HARBOR, ISLAND, JEFFERSON, KING,

KITSAP, KITTITAS, MASON, OKANOGAN (WEST OF THE 120TH MERIDIAN),

SAN JUNA, SKAGIT, SNOHOMISH, WHATCOM AND YAKIMA (WEST OF THE

120TH MERIDIAN) COUNTIES

Zone 1 (0-25 radius miles):

POWER EQUIPMENT OPERATOR

Group 1A...................$ 41.90 19.20 Group 1AA..................$ 42.52 19.20 Group 1AAA.................$ 43.13 19.20 Group 1.....................$ 41.29 19.20 Group 2.....................$ 40.76 19.20 Group 3.....................$ 40.29 19.20 Group 4.....................$ 37.70 19.20

D - 9

General Wage Decision Revised by Amendment A003

Zone Differential (Add to Zone 1 rates):

Zone 2 (26-45 radius miles) - $1.00 Zone 3 (Over 45 radius miles) - $1.30

BASEPOINTS: Aberdeen, Bellingham, Bremerton, Everett, Kent, Mount Vernon, Port Angeles, Port Townsend, Seattle, Shelton, Wenatchee, Yakima

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1AAA - Cranes-over 300 tons, or 300 ft of boom (including jib with attachments)

GROUP 1AA - Cranes 200 to 300 tons, or 250 ft of boom (including jib with attachments); Tower crane over 175 ft in height, base to boom

GROUP 1A - Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders-overhead, 8 yards and over; Shovels, excavator, backhoes-6 yards and over with attachments

GROUP 1 - Cableway; Cranes 45 tons thru 99 tons, under 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 45 tons thru 99 tons; Derricks on building work; Excavator, shovel, backhoes over 3 yards and under 6 yards; Hard tail end dump articulating off-road equipment 45 yards and over; Loader- overhead 6 yards to, but not including 8 yards; Mucking machine, mole, tunnel, drill and/or shield; Quad 9, HD 41, D-10; Remote control operator on rubber tired earth moving equipment; Rollagon;

Scrapers-self propelled 45 yards and over; Slipform pavers;

Transporters, all truck or track type

GROUP 2 - Barrier machine (zipper); Batch Plant Operaor- Concrete; Bump Cutter; Cranes, 20 tons thru 44 tons with attachments; Crane-overhead, bridge type-20 tons through 44 tons; Chipper; Concrete Pump-truck mount with boom attachment; Crusher; Deck Engineer/Deck Winches (power);

Drilling machine; Excavator, shovel, backhoe-3yards and under; Finishing Machine, Bidwell, Gamaco and similar equipment; Guardrail punch; Horizontal/directional drill operator; Loaders-overhead under 6 yards; Loaders-plant feed; Locomotives-all; Mechanics-all; Mixers-asphalt plant;

Motor patrol graders-finishing; Piledriver (other than crane mount); Roto-mill,roto-grinder; Screedman, spreader, topside operator-Blaw Knox, Cedar Rapids, Jaeger, Caterpillar, Barbar Green; Scraper-self propelled, hard tail end dump, articulating off-road equipment-under 45 yards; Subgrade trimmer; Tractors, backhoes-over 75 hp;

Transfer material service machine-shuttle buggy, blaw knox-roadtec; Truck crane oiler/driver-100 tons and over;

Truck Mount portable conveyor; Yo Yo Pay dozer

GROUP 3 - Conveyors; Cranes-thru 19 tons with attachments;

A-frame crane over 10 tons; Drill oilers-auger type, truck

D - 10

General Wage Decision Revised by Amendment A003 or crane mount; Dozers-D-9 and under; Forklift-3000 lbs.

and over with attachments; Horizontal/directional drill locator; Outside hoists-(elevators and manlifts), air tuggers, strato tower bucket elevators; Hydralifts/boom trucks over 10 tons; Loader-elevating type, belt; Motor patrol grader-nonfinishing; Plant oiler- asphalt, crusher;

Pumps-concrete; Roller, plant mix or multi-lift materials;

Saws-concrete; Scrpers-concrete and carry-all; Service engineer-equipment; Trenching machines; Truck Crane Oiler/Driver under 100 tons; Tractors, backhoe 75 hp and under

GROUP 4 - Assistant Engineer; Bobcat; Brooms; Compressor;

Concrete finish mahine-laser screed; Cranes-A frame-10 tons and under; Elevator and Manlift-permanent or shaft type;

Gradechecker, Stakehop; Forklifts under 3000 lbs. with attachments; Hydralifts/boom trucks, 10 tons and under; Oil distributors, blower distribution and mulch seeding operator; Pavement breaker; Posthole digger, mechanical;

Power plant; Pumps, water; Rigger and Bellman; Roller-other than plant mix; Wheel Tractors, farmall type;

Shotcrete/gunite equipment operator

HANDLING OF HAZARDOUS WASTE MATERIALS:

Personnel in all craft classifications subject to working inside a federally designated hazardous perimeter shall be elgible for compensation in accordance with the following group schedule relative to the level of hazardous waste as outlined in the specific hazardous waste project site safety plan.

H-1 Base wage rate when on a hazardous waste site when not outfitted with protective clothing

H-2 Class "C" Suit - Base wage rate plus $ .25 per hour.

H-3 Class "B" Suit - Base wage rate plus $ .50 per hour.

H-4 Class "A" Suit - Base wage rate plus $ .75 per hour.

ENGI0370-002 06/01/2018

ADAMS, ASOTIN, BENTON, CHELAN (EAST OF THE 120TH MERIDIAN),

COLUMBIA, DOUGLAS (EAST OF THE 120TH MERIDIAN), FERRY,

FRANKLIN, GARFIELD, GRANT, LINCOLN, OKANOGAN (EAST OF THE 120TH

MERIDIAN), PEND OREILLE, SPOKANE, STEVENS, WALLA WALLA, WHITMAN

AND YAKIMA (EAST OF THE 120TH MERIDIAN) COUNTIES

ZONE 1:

GROUP 1.....................$ 27.51 15.95

D - 11

General Wage Decision Revised by Amendment A003

GROUP 2.....................$ 27.83 15.95

GROUP 3.....................$ 28.44 15.95

GROUP 4.....................$ 28.60 15.95

GROUP 5.....................$ 28.76 15.95

GROUP 6.....................$ 29.04 15.95

GROUP 7.....................$ 29.31 15.95

GROUP 8.....................$ 30.41 15.95

ZONE DIFFERENTIAL (Add to Zone 1 rate): Zone 2 - $2.00

Zone 1: Within 45 mile radius of Spokane, Pasco, Washington;

Lewiston, Idaho

Zone 2: Outside 45 mile radius of Spokane, Pasco, Washington; Lewiston, Idaho

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Bit Grinders; Bolt Threading Machine; Compressors (under 2000 CFM, gas, diesel, or electric power); Deck Hand; Fireman & Heater Tender; Hydro-seeder, Mulcher, Nozzleman; Oiler Driver, & Cable Tender, Mucking Machine;

Pumpman; Rollers, all types on subgrade, including seal and chip coatings (farm type, Case, John Deere & similar, or Compacting Vibrator), except when pulled by Dozer with operable blade; Welding Machine; Crane Oiler-Driver (CLD required) & Cable Tender, Mucking Machine

GROUP 2: A-frame Truck (single drum); Assistant Refrigeration Plant (under 1000 ton); Assistant Plant Operator, Fireman or Pugmixer (asphalt); Bagley or Stationary Scraper; Belt Finishing Machine; Blower Operator (cement); Cement Hog;

Compressor (2000 CFM or over, 2 or more, gas diesel or electric power); Concrete Saw (multiple cut); Distributor Leverman; Ditch Witch or similar; Elevator Hoisting Materials; Dope Pots (power agitated); Fork Lift or Lumber Stacker, hydra-lift & similar; Gin Trucks (pipeline);

Hoist, single drum; Loaders (bucket elevators and conveyors); Longitudinal Float; Mixer (portable-concrete);

Pavement Breaker, Hydra-Hammer & similar; Power Broom;

Railroad Ballast Regulation Operator (self-propelled);

Railroad Power Tamper Operator (self-propelled); Railroad Tamper Jack Operator (self-propelled; Spray Curing Machine (concrete); Spreader Box (self-propelled); Straddle Buggy (Ross & similar on construction job only); Tractor (Farm type R/T with attachment, except Backhoe); Tugger Operator

GROUP 3: A-frame Truck (2 or more drums); Assistant Refrigeration Plant & Chiller Operator (over 1000 ton);

Backfillers (Cleveland & similar); Batch Plant & Wet Mix Operator, single unit (concrete); Belt-Crete Conveyors with power pack or similar; Belt Loader (Kocal or similar);

Bending Machine; Bob Cat (Skid Steer); Boring Machine (earth); Boring Machine (rock under 8 inch bit) (Quarry Master, Joy or similar); Bump Cutter (Wayne, Saginau or similar); Canal Lining Machine (concrete); Chipper (without crane); Cleaning & Doping Machine (pipeline); Deck

D - 12

General Wage Decision Revised by Amendment A003

Engineer; Elevating Belt-type Loader (Euclid, Barber Green & similar); Elevating Grader-type Loader (Dumor, Adams or similar); Generator Plant Engineers (diesel or electric);

Gunnite Combination Mixer & Compressor; Locomotive Engineer; Mixermobile; Mucking Machine; Posthole Auger or Punch; Pump (grout or jet); Soil Stabilizer (P & H or similar); Spreader Machine; Dozer/Tractor (up to D-6 or equivalent) and Traxcavator; Traverse Finish Machine;

Turnhead Operator

GROUP 4: Concrete Pumps (squeeze-crete, flow-crete, pump-crete, Whitman & similar); Curb Extruder (asphalt or concrete); Drills (churn, core, calyx or diamond);

Equipment Serviceman; Greaser & Oiler; Hoist (2 or more drums or Tower Hoist); Loaders (overhead & front-end, under 4 yds. R/T); Refrigeration Plant Engineer (under 1000 ton);

Rubber-tired Skidders (R/T with or without attachments);

Surface Heater & Plant Machine; Trenching Machines (under 7

ft. depth capacity); Turnhead (with re-screening); Vacuum Drill (reverse circulation drill under 8 inch bit)

GROUP 5: Backhoe (under 45,000 gw); Backhoe & Hoe Ram (under 3/4 yd.); Carrydeck & Boom Truck (under 25 tons); Cranes (25 tons & under), all attachments including clamshell, dragline; Derricks & Stifflegs (under 65 tons); Drilling Equipment(8 inch bit & over) (Robbins, reverse circulation & similar); Hoe Ram; Piledriving Engineers; Paving (dual drum); Railroad Track Liner Operaotr (self-propelled);

Refrigeration Plant Engineer (1000 tons & over); Signalman (Whirleys, Highline Hammerheads or similar); Grade Checker

GROUP 6: Asphalt Plant Operator; Automatic Subgrader (Ditches & Trimmers)(Autograde, ABC, R.A. Hansen & similar on grade wire); Backhoe (45,000 gw and over to 110,000 gw); Backhoes & Hoe Ram (3/4 yd. to 3 yd.); Batch Plant (over 4 units);

Batch & Wet Mix Operator (multiple units, 2 & incl. 4);

Blade Operator (motor patrol & attachments); Cable Controller (dispatcher); Compactor (self-propelled with blade); Concrete Pump Boom Truck; Concrete Slip Form Paver;

Cranes (over 25 tons, to and including 45 tons), all attachments including clamshell, dragline; Crusher, Grizzle & Screening Plant Operator; Dozer, 834 R/T & similar; Drill Doctor; Loader Operator (front-end & overhead, 4 yds. incl.

8 yds.); Multiple Dozer Units with single blade; Paving Machine (asphalt and concrete); Quad-Track or similar equipment; Rollerman (finishing asphalt pavement); Roto Mill (pavement grinder); Scrapers, all, rubber-tired;

Screed Operator; Shovel(under 3 yds.); Trenching Machines (7 ft. depth & over); Tug Boat Operator Vactor guzzler, super sucker; Lime Batch Tank Operator (REcycle Train);

Lime Brain Operator (Recycle Train); Mobile Crusher Operator (Recycle Train)

GROUP 7: Backhoe (over 110,000 gw); Backhoes & Hoe Ram (3 yds & over); Blade (finish & bluetop) Automatic, CMI, ABC, Finish Athey & Huber & similar when used as automatic;

Cableway Operators; Concrete Cleaning/Decontamination

D - 13

General Wage Decision Revised by Amendment A003 machine operator; Cranes (over 45 tons to but not including 85 tons), all attachments including clamshell and dragine;

Derricks & Stiffleys (65 tons & over); Elevating Belt (Holland type); Heavy equipment robotics operator; Loader (360 degrees revolving Koehring Scooper or similar);

Loaders (overhead & front-end, over 8 yds. to 10 yds.);

Rubber-tired Scrapers (multiple engine with three or more scrapers); Shovels (3 yds. & over); Whirleys & Hammerheads, ALL; H.D. Mechanic; H.D. Welder; Hydraulic Platform Trailers (Goldhofer, Shaurerly andSimilar); Ultra High Pressure Wateriet Cutting Tool System Operator (30,000 psi); Vacuum Blasting Machine Operator

GROUP 8: Cranes (85 tons and over, and all climbing, overhead,rail and tower), all attachments including clamshell, dragline; Loaders (overhead and front-end, 10 yards and over); Helicopter Pilot

BOOM PAY: (All Cranes, Including Tower) 180 ft to 250 ft $ .50 over scale Over 250 ft $ .80 over scale

NOTE:

In computing the length of the boom on Tower Cranes, they shall be measured from the base of the Tower to the point of the boom.

HAZMAT:

Anyone working on HAZMAT jobs, working with supplied air shall receive $1.00 an hour above classification.

ENGI0612-012 06/01/2018

LEWIS,PIERCE, PACIFIC (portion lying north of a parallel line extending west from the northern boundary of Wahkaikum County to the sea) AND THURSTON COUNTIES

ON PROJECTS DESCRIBED IN FOOTNOTE A BELOW, THE RATE FOR EACH

GROUP SHALL BE 90% OF THE BASE RATE PLUS FULL FRINGE BENEFITS.

ON ALL OTHER WORK, THE FOLLOWING RATES APPLY.

Zone 1 (0-25 radius miles):

GROUP 1A...................$ 44.43 19.15

GROUP 1AA..................$ 45.09 19.15

GROUP 1AAA.................$ 45.73 19.15

GROUP 1.....................$ 43.79 19.15

GROUP 2.....................$ 43.24 19.15

GROUP 3.....................$ 42.74 19.15

GROUP 4.....................$ 40.02 19.15

Zone Differential (Add to Zone 1 rates):

D - 14

General Wage Decision Revised by Amendment A003

Zone 2 (26-45 radius miles) = $1.00 Zone 3 (Over 45 radius miles) - $1.30

BASEPOINTS: CENTRALIA, OLYMPIA, TACOMA

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1 AAA - Cranes-over 300 tons or 300 ft of boom (including jib with attachments)

GROUP 1AA - Cranes- 200 tonsto 300 tons, or 250 ft of boom (including jib with attachments; Tower crane over 175 ft in height, bas to boom

GROUP 1A - Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders-overhead, 8 yards and over; Shovels, excavator, backhoes-6 yards and over with attachments

GROUP 1 - Cableway; Cranes 45 tons thru 99 tons under 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 45 tons thru 99 tons; Derricks on building work; Excavator, shovel, backhoes over 3 yards and under 6 yards; Hard tail end dump articulating off-road equipment 45 yards and over; Loader- overhead, 6 yards to, but not including, 8 yards; Mucking machine, mole, tunnel, drill and/or shield; Quad 9 HD 41, D-10; Remote control operator on rubber tired earth moving equipment; Rollagon; Scrapers-self-propelled 45 yards and over; Slipform pavers;

Transporters, all track or truck type

GROUP 2 - Barrier machine (zipper); Batch Plant Operator-concrete; Bump Cutter; Cranes, 20 tons thru 44 tons with attachments; Crane-Overhead, bridge type, 20 tons through 44 tons; Chipper; Concrete pump-truck mount with boom attachment; Crusher; Deck engineer/deck winches (power);

Drilling machine; Excavator, shovel, backhoe-3 yards and under; Finishing machine, Bidwell, Gamaco and similar equipment; Guardrail punch; Loaders, overhead under 6 yards; Loaders-plant feed; Locomotives-all; Mechanics- all;

Mixers, asphalt plant; Motor patrol graders, finishing;

Piledriver (other than crane mount); Roto-mill, roto-grinder; Screedman, spreader, topside operator-Blaw Knox, Cedar Rapids, Jaeger, Caterpillar, Barbar Green;

Scraper-self- propelled, hard tail end dump, articulating off-road equipment- under 45 yards; Subgrader trimmer;

Tractors, backhoe over 75 hp; Transfer material service machine-shuttle buggy, Blaw Knox- Roadtec; Truck Crane oiler/driver-100 tons and over; Truck Mount Portable Conveyor; Yo Yo pay

GROUP 3 - Conveyors; Cranes through 19 tons with attachments;

Crane-A-frame over 10 tons; Drill oilers-auger type, truck or crane mount; Dozer-D-9 and under; Forklift-3000 lbs. and over with attachments; Horizontal/directional drill locator; Outside Hoists-(elevators and manlifts), air

D - 15

General Wage Decision Revised by Amendment A003 tuggers, strato tower bucket elevators; Hydralifts/boom trucks over 10 tons; Loaders-elevating type, belt; Motor patrol grader-nonfinishing; Plant oiler- asphalt, crusher;

Pump-Concrete; Roller, plant mix or multi-lfit materials;

Saws-concrete; Scrapers, concrete and carry all; Service engineers-equipment; Trenching machines; Truck crane oiler/driver under 100 tons; Tractors, backhoe under 75 hp

GROUP 4 - Assistant Engineer; Bobcat; Brooms; Compressor;

Concrete Finish Machine-laser screed; Cranes A-frame 10 tons and under; Elevator and manlift (permanent and shaft type); Forklifts-under 3000 lbs. with attachments;

Gradechecker, stakehop; Hydralifts/boom trucks, 10 tons and under; Oil…