662-23-105_Equipment Cutbook 2 of 2-min.pdf

PDF 16 MB Posted Jan 7, 2026

Attached to: Project No. 662-23-105 Renovate Sterile Processing for VAMC - San Francisco
Solicitation number: 36C26126AP1955
Issued by: Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 21

About this file

Written by GovTribe AI · Jan 7, 2026

This document contains a detailed technical specification for a Getinge Steam Sterilizer (Model 67N17), a medical equipment item for a VA Medical Center renovation project. The sterilizer is a 67-inch double-door, recessed-mount unit designed for steam sterilization of hospital and laboratory supplies, with temperatures ranging from 110°C to 135°C and a liquid cycle option from 100°C to 121°C. Key specifications include a 24x36x60 chamber, 3,185-pound weight, and complex utility requirements including plumbing (cold water/drain), electrical (3-phase, 480V), medical air, and steam.

The sterilizer is part of Project 662-23-105 to renovate the Sterile Processing Service at the VA San Francisco Medical Center, with a project magnitude between $10-20 million. The renovation involves extensive interior work and will require a mobile processing trailer during construction. The project uses NAICS code 236220 (Commercial and Institutional Building Construction) with a small business size standard of $45 million. This is currently a sources sought announcement to identify potential qualified general contractors, with the VA seeking a firm-fixed-price construction contract for the facility upgrade.

View the file

Other files

File	Type	Posted
662-23-105_Final Construction Documents_Combined Drawing_DRAFT.pdf	PDF	Jan 7, 2026
662-23-105_Project Room Contents.pdf	PDF	Jan 7, 2026
662-23-105_Equipment Cutbook 1 of 2-min.pdf	PDF	Jan 7, 2026
Sources Sought Notice No. 36C26126R0019 - Project No. 662-23-105, Renovate SPS.docx	DOCX document	Jan 7, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

NOMENCLATURE Sink,Mop,Molded Stone JSN P4700

Acq/Ins C / C - Contractor Furnished, Contractor Installed Weight (lbs) 70 Weight (kg) 32

Height (in) 10 Height (cm) 25

Width (in) 36 Width (cm) 91

Depth (in) 24 Depth (cm) 61

Utility 1: Plumbing D | Cold and hot water and drain

Utility 2: Electrical . |

Utility 3: Med Gas . |

Utility 4: Misc Gas . |

Utility 5: Non-Med Gas . |

Utility 6: Misc . |

PHASE 0

AMPS 0

VOLTS 0

HERTZ 0

BTU / HR 0

WATTS 0

Description Mop service sink approximately 10"H x 36"W x 24"D. Also called a mop service basin and a mop receptor. Unit is made of molded stone and is a one piece item. It shall include a service faucet hose, hose bracket and mop hanger. Used in utility rooms for cleaning mops and floor cleaning equipment.

Weights and Measures (Typical Only)

Utilities NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to develop and coordinate the design/construction in accordance with actual equipment selection.

JOB

LOCATION

ARCHITECT

ENGINEER

QUALITY OPTIONAL FITTINGS

A. T-10-VB Mop-Service sink fitting with vacuum breaker, adjustable top brace, 3/4" hose thread on spout with bucket hook inlets 8" on center, chrome finish.

T-15 VB same as above with polished chrome finish.

B. T-35 Hose and wall hook. Hose 36" long, with 3/4" chrome couplings. Wall bracket of stainless steel.

C. T-40 Stainless Steel Mop Hanger of stainless steel with #4 finish. . . 24" long, with 3 rubber spring loaded grips.

D. BP Splash Catcher Panels of 20 ga. type 304 stainless steel.

Model No. ( ) Size ( ), as manufactured by Stern-Williams Co., Inc. Shoulders shall not be less than 8" high inside measurement, and not less than 1-1/4" wide. Drain shall be cast brass with stainless steel strainer cast integral and shall provide for a caulked lead connection not less than 1" deep to a 3" pipe. Receptor composed of pearl grey marble chips and white Portland cement ground smooth, grouted and sealed to resist stains.

An optional anodized extruded aluminum or vinyl bumper guard is offered for exposed sides. Cap to be attached on the job.

MTB®

ARCHITECTURAL

SPECIFICATIONS

MODEL SIZE ALUMINUM OR VINYL CAP FOR EXPOSED SIDES

MTB SQUARE BASIN

■ MTB-2424 24”x24"x10” ■ CAP ON 1 SIDE ■ CAP ON 2 SIDES ■ CAP ON 3 SIDES

MTB RECTANGULAR BASIN

■ MTB-3624 36”x24"x10” ■ CAP ON 1 SIDE ■ CAP ON 2 SIDES ■ CAP ON 3 SIDES

A-20

V-70

A-20 Aluminum bumper guards V-70 Vinyl bumper guards -SS Stainless steel caps, cast integral during production

P4700

NO. MTB 9-02

Note: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 MM).

STERN-WILLIAMS CO., INC. • P.O. Box 8004 • Shawnee Mission, Kansas 66208 USA Telephone: (913) 362-5635 • Fax: (913) 362-6689 • Web address: www.sternwilliams.com

P4700

NOMENCLATURE Shower,Single,Hand-Held JSN P5040

Weight (lbs) 5 Weight (kg) 2

Height (in) 0 Height (cm) 0

Width (in) 0 Width (cm) 0

Depth (in) 0 Depth (cm) 0

Utility 1: Plumbing D | Cold and hot water and drain

Utility 2: Electrical . |

Utility 3: Med Gas . |

Utility 4: Misc Gas . |

Utility 5: Non-Med Gas . |

Utility 6: Misc . |

PHASE 0

AMPS 0

VOLTS 0

HERTZ

BTU / HR 0

WATTS 0

Description A complete, barrier-free, single hand-held, personal shower system. The shower system includes:

pressure balanced mixing valve with high temperature limit stop; personal hand shower; shower hose; wall supply; and slide bar. For general purpose use throughout the facility in shower stalls.

Weights and Measures (Typical Only)

Utilities NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to develop

SHOWER SYSTEMS

SHOWER SYSTEM KIT

PRODUCT FEATURES:

VALVE: Cast Brass Valve Body: Durable.

Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance.

Pressure Balancing Valve Cartridge: Maintains constant output temperature in response to changes in hot and cold supply pressure. Diaphragm system with integrated check valves engineered to eliminate cross flow. Avoids feature due to mineral deposits - ideal for use in hard water.

Back-to-Back Capability: Hot and cold can be reversed quickly and easily.

Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Integral Plaster Guard and Mounting Plate: Protects valve during installation and serves as a mounting plate for thin-wall installations.

PERSONAL SHOWER:

Lightweight, Ergonomic Design: For a sure grip even with wet, soapy hands.

SLIDE BAR: Simple Height Adjustment: Allows positioning of the personal shower anywhere along the bar.

MODEL NUMBER:

1662.601 Shower System Kit

Includes:

SUGGESTED SPECIFICATION:

Shower system shall feature a wall supply with 1/2" NPT female inlets, 1/2" NPSM male outlet, 59" hose, personal shower and a 25"

Standard Slide Bar. Pressure Balance valve shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of back-to-back installation. Shall also feature hot limit safety stop. Fitting shall be American Standard Model # 1662.601.002.

GENERAL DESCRIPTION:

Complete personal shower system includes: a Colony pressure balance valve, a wall supply with 1/2" NPT female inlet and 1/2" NPSM male outlet; a 59" (1500mm) shower hose; a single function personal shower; and a 25" Slide Bar.

Cast brass body, washerless ceramic disc valve cartridge with back-to-back capability, integrated check valves and hot limit safety stop. Cycles from off to hot through cold. Exclusive Colony pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. One-half inch direct sweat inlets and outlets. With screwdriver stops. Durable metal handle provides easy, certain control for all users. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Single function handshower with 2.5 gpm/9.5L/min. (1662.601 kit) or

1.5 gpm/5.7L/min. (1662.601F15 kit) flow restrictor. Slide bar features an adjustable shower holder which can be set at any height or position along the bar and angle up to 45˚.

T371.240

R110SS

1660.505 8888.035 8888.037 1660.225 1660.400

• Colony Valve Only Trim Kit

• Rough Pressure Balance Valve w/stops

• Fixed Handshower

• Hose

• Wall Supply

• Standard Slide Bar

• In-line Vacuum Breaker

146mm (5-3/4")

67mm (2-5/8")

1/2" NPSM

5/8 O.D. FOR

1/2 NOM.

COPPER

SWEAT

ALL

CONNECTIONS

51mm (2")

INLETS

149mm (5-7/8") 51mm

(2")

SWEAT

INLETS

w/STOPS

2.5gpm

HANDSHOWER

1.5gpm

HANDSHOWER

"SEE

ILLUSTRATION

BELOW"

171mm (6-3/4")

86mm (3-3/8")

65mm (2-1/2")

82mm (3-1/4")

45mm (1-3/4")

127mm (5")

24mm (1")

600mm (23-5/8")

549mm (21-5/8")

32mm (1-1/4")13mm

(1/2")

1/2" NPT

1829mm (72") to 1990mm (78")

(OPTIONAL)TO

FINISHED FLOOR

RUBBER

GASKET

FINISHED

WALL

1/2" NPSM

HOSE

CONNECTION

53mm (2-1/16")

1/2" NPSM

239mm (9-3/8")

90mm (3-1/2")

65mm (2-1/2")

P5040

SHOWER SYSTEMS

SHOWER SYSTEM KIT

CODES AND STANDARDS

Install as required to comply with local code requirements.

ASME A112.18.1

ASSE 1016

ANSI A117.1

1662.601

Product Number Description

Shower System Kit. Contains pressure balace valve, “Fixed” handshower (2.5 gpm), hose, wall supply and slide bar.

FloWise® Single Function Hand Shower (1.5 gpm)

Finish

Polished Chrome

FLOW RATE*

G A

L L

O N

S P

E R

U T

I N L E T P R E S S U R E ( P S I ) *Flow rates shown are for mixed hot and cold.

2.5 gpm Hand Shower

1.5 gpm Hand Shower

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

10080604020

1662F15.601

Available Modification Part Number

P5040

NOMENCLATURE Shower,Safety,Freestanding,With Eye/Face Wash JSN P5210

Weight (lbs) 45 Weight (kg) 20

Height (in) 94 Height (cm) 239

Width (in) 15 Width (cm) 38

Depth (in) 32 Depth (cm) 81

Utility 1: Plumbing B | Cold water and drain

Utility 2: Electrical . |

Utility 3: Med Gas . |

Utility 4: Misc Gas . |

Utility 5: Non-Med Gas . |

Utility 6: Misc . |

PHASE 0

AMPS 0

VOLTS 0

HERTZ

BTU / HR 0

WATTS 0

Description Deluge safety shower. This is a complete, maximum protection safety station consisting of a free-standing emergency shower and an eye/face wash fixture. Used anywhere exposure to hazardous substances may occur.

Weights and Measures (Typical Only)

Utilities NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to develop

NOMENCLATURE Toilet,Wall Hung,Siphon Jet JSN P9050

Weight (lbs) 60 Weight (kg) 27

Height (in) 15 Height (cm) 38

Width (in) 17 Width (cm) 43

Depth (in) 27 Depth (cm) 69

Utility 1: Plumbing B | Cold water and drain

Utility 2: Electrical . |

Utility 3: Med Gas . |

Utility 4: Misc Gas . |

Utility 5: Non-Med Gas . |

Utility 6: Misc . |

PHASE 1

AMPS 1

VOLTS 120

HERTZ 60

BTU / HR 0

WATTS 120

Description Siphon jet water closet/ toilet. This unit is wall hung with an elongated bowl, top spud flushometer, seat with open front and check hinge, and carrier. Used in restrooms throughout the health care facility.

Weights and Measures (Typical Only)

Utilities NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to develop

To Be Specified:

❏ Color: ❏ White ❏ Seat:

❏ American Standard #5901.100

Heavy duty open front less cover ❏ American Standard #5905.100

Extra heavy duty open front less cover

AFWALL® MILLENIUM™ FloWise®

1.28 GPF FLUSHOMETER TOILET SYSTEM

with EVERCLEAN®

SELECTRONIC® EXPOSED AC FLUSH VALVE

AFWALL® MILLENIUM™ FloWise® 1.28 GPF

FLUSHOMETER TOILET SYSTEM with EVERCLEAN®

❏ 3351.712 1.28 gpf Exposed Top Spud Bowl and Selectronic® Exposed AC Flush Valve

BOWL:

1.6 gpf (4.2 Lpf to 6.0 Lpf) Permanent EverClean® surface inhibits the growth of on the surface

SELECTRONIC® FLUSH VALVE:

® proximity prevent clogging and reduces maintenance repeatability water pressure trap seal chloramines water resistant remote control

Includes:

BARRIER FREE

High-Efficiency Toilet System toilet systems

System MaP Score:

Operating Pressure:

** Water pressure over 80 psi is not

Flow Requirement:

25gpm (94.6 L/min.)

Nominal Fixture Dimensions:

1 3351.712

P9050

BARRIER FREE

AFWALL® MILLENIUM™ FloWise®

1.28 GPF FLUSHOMETER TOILET SYSTEM

with EVERCLEAN®

SELECTRONIC® EXPOSED AC FLUSH VALVE

NOTES:

WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING

NOT RECOMMENDED).

IMPORTANT:

for use of superseded or voided pages

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND

FACILITIES - CHECK LOCAL CODES.

When installed so that top of seat is 432 to 483mm (17" to 19") from the finished floor.

Fixture Compliance Certifications -

Meets or Exceeds the Following Specifications:

Vitreous China Fixtures

Valve Listings:

VALVE LEFT or RIGHT HAND INSTALLATION

*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be a minimum of 152mm (6") above fixture. Consult Codes for details.

72mm (2-7/8")

SUPPLY

DN 25mm (1" I.P.S.)

45˚

180˚

293mm (11-1/2")

ROUGH-IN

DIMENSION

356mm (14")

*CRITICAL

LEVEL

115mm -134mm (4-1/2" - 5-1/4")

305mm

(12" MAX.)

660mm

(26")73mm (2-7/8")

FINISHED WALL

409mm (16-1/8")

DETECTION ZONE

400mm-800mm

(15-3/4" TO 31-1/2")

15˚

86mm (3-3/8")

51mm (2") HOLE

FOR CONDUIT

Hubbel-RACO 8192 4" ELECTRICAL BOX

OR EQUIVALENT BY CONTRACTOR

-C-L- 470mm

(18-1/2")

C/L OF SEAT POST

HOLES 140 mm

(5-1/2") CENTER

-C-L-

(4) Ø 22mm

(7/8") HOLES

191mm

(7-1/2")

133mm

(5-1/4")

229mm

(9")

FINISHED

FLOOR

333mm

(13-1/8")

381mm

(15")

41mm

(1-5/8")

SELECTRONIC™ FloWise® EXPOSED

1.28 GPF TOILET FLUSH VALVE

HARD-WIRED AC POWERED, SENSOR OPERATED

MODEL NUMBER:

❑ 6067.121.002 HARD-WIRED AC POWERED:

Includes UL-approved Hard-Wired AC transformer

(electrical box by others). 11-1/2" rough-in

❑ 6068.121.002 MULTI-AC POWERED:

Includes 10' extension cable One transformer (sold separately) can operate up to 15 faucets and/or flush valves. 11-1/2" rough-in

OPERATING PRESSURE:

Overall Range: 20-125 psi**

Recommended: 25 psi (flowing)-80 psi (static)

FLOW REQUIREMENT:

25gpm (94.6 L/min.)

** Water pressure over 80 psi is not recommended for most plumbing fixtures.

ACCESSORIES:

RECOMMENDED SPECIFICATION:

supply that provides 6 VDC power to run system. Includes a fully mechanical manual over-ride that can provide a complete flush without power.

Includes cast brass valve body and metal cover with chrome finish and vandal resistant stop cap. Angle stop with back-flow protection and

GENERAL DESCRIPTION:

floor-mounted or wall-hung 1-1/2" top spud bowls.

I cover tube and wall flange.

and flange.

PRODUCT FEATURES:

for “Hands Free” operation

6 VDC.

prevents clogging and reduces maintenance repeatability chloramines and ammonia loss of power or water pressure during a power outage supplied by others) with no visible fasteners resistant

SUPPLY

DN 25mm (1" I.P.S.)

115mm - 134mm (4-1/2" - 5-1/4")

FINISHED WALL

FINISHED

FLOOR

57mm (2-1/4")- 137mm (5-3/8")

409mm (16-1/8")

TYPICAL WATER CLOSET INSTALLATION:

AFWALL™ TOILET SHOWN

293mm (11-1/2")

-C-L-

SEE ROUGH-IN

ON BACK

CRITICAL

LEVEL

COVER &

ELECTRICAL

BOX

160mm (6-1/4")

86mm (3-3/8")

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND

USABLE BUILDING FACILITIES-CHECK LOCAL CODES

❑ 6067.121.002

SELECTRONIC™ FloWise® EXPOSED

1.28 GPF TOILET FLUSH VALVE

HARD-WIRED AC POWERED, SENSOR OPERATED

Roughing-in Dimensions

Right or Left Hand Installation

*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6" min. (152mm) above fixture.

Consult Codes for details.

TOP OF

FIXTURE

409mm (16-1/8)

152mm

(6 MIN.)

293mm (11-1/2)

-C-L-

116mm (4-5/8)

86mm (3-3/8)

72mm (2-7/8)

DETECTION ZONE

400mm-800mm

(15-3/4 TO 31-1/2)

2-GANG ELECTRICAL

BOX BY OTHERS

SUPPLY

DN 25mm (1¨ I.P.S.)

15˚

FINISHED WALL

51mm (2") HOLE

FOR CONDUIT

115mm-134mm

(4-1/2 TO 5-1/4)

FOR 1-1/2" TOP

SPUD FIXTURES

MANUAL

OVERRIDE

BUTTON

*CRITICAL

LEVEL

45˚

180 ˚

305mm

(12 MAX.)

160mm (6-1/4)

57mm (2-1/4) - 137mm (5-3/8)

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND

USABLE BUILDING FACILITIES-CHECK LOCAL CODES

LISTINGS:

COMMERCIAL TOILET SEATS

❏ 5901.100

❏ 5901.100SS

❏ 5901.110

❏ 5905.100

❏ 5905.100SS

❏ 5905.110

❏ 5910.100

❏ 5910.110

To Be Specified:

5910.110

COMMERCIAL TOILET SEATS

Model # 5901 5905 5910

Ring Thickness

Ring Thickness with Bumper

NOMENCLATURE Ice Maker,Flaked,With Dispenser JSN R4650

Weight (lbs) 585 Weight (kg) 265

Height (in) 82 Height (cm) 208

Width (in) 36 Width (cm) 91

Depth (in) 30 Depth (cm) 76

Utility 1: Plumbing B | Cold water and drain

Utility 2: Electrical B | 120 volt, special outlet

Utility 3: Med Gas . |

Utility 4: Misc Gas . |

Utility 5: Non-Med Gas . |

Utility 6: Misc . |

PHASE 1

AMPS 20

VOLTS 115

HERTZ 60

BTU / HR 0

WATTS 2300

Description Ice maker dispenser approximately 71" H x 19"D x 24"W. This unit provides flaked ice and cooled water automatically. The unit has a daily capacity up to 650 pounds and a 100 pound capacity stainless steel storage compartment with water station. Unit may be free-standing or counter-mounted, automatic load ice dispenser for food service and healthcare use. The unit is used in healthcare institutions and various commercial food service operations for dispensing ice.

Weights and Measures (Typical Only)

Utilities NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to develop

1-800-SCOTSMAN Fax: 847-913-9844 customer.relations@scotsman-ice.comwww.scotsman-ice.com

101 Corporate Woods Parkway, Vernon Hills, IL 60061

- Ice

M a ch in e / D isp e n se r

HID540 - Ice Machine / Dispenser Ice and Water Dispenser

The Meridian™ Difference Smarter Construction - Durable stainless steel evaporator and exterior panels.

Greaseless bearings for reduced maintenance. Larger sink opening and dispensing area. Antimicrobial AquaArmor with AgION™ is molded into key components.

Space-maximizing design - The industry's smallest operational footprint relative to capacity. Featuring specially designed contoured sides for enhanced breathability and an external air filter.

More convenient front access - Removable front panels allow ease of access and service to all key internal components. Including a removable storage bin for better cleaning and maintenance access.

Enhanced service features - Intuitive LED diagnostic lights reduce service time.

Unit specific QR code for quick access to service manuals and warranty history. Convenient USB drive that allows for fast software updates. New removable sink and grill provide maximum access for ease of cleaning.

Energy and Water Efficiency - Industry leading efficiencies deliver on going savings.

Quieter operation - Improved condenser fan function.

24 Hour Volume Production

70˚F/21˚C 50˚F/10˚C lb/kg 500/227

90˚F/32˚C 70˚F/21˚C lb/kg 365/166

Air Cooled

Air Water

70˚F/21˚C 50˚F/10˚C lb/kg 500/227

90˚F/32˚C 70˚F/21˚C lb/kg 400/181

Water Cooled

Air Water

Specifications

Model Number

Condenser Unit

Basic Electrical Volts/Hz/Phase

Max. Fuse Size or HACR Circuit Breaker (amps)

Energy Consumption kWh/100 lb

90˚F(32˚C)/70˚F(21˚C)

HID540A-1

HID540W-1

Air

Water

Storage Capacity

Min. Circuit Amps

Cord

115/60/1

5.50

4.30

90˚F(32˚C)/70˚F(21˚C)

Water Usage Gallons/100 lb (liters/45.4 kg)

Potable Condenser

12/45.5

120/454.3 HID540AW-1* Air 40 Cord115/60/1 15 5.50 12/45.5 -

Shown with optional KLP24A legs.

*Wall mount configuration. Does not have or accept a drip tray. Unit designed to be installed over existing sink.

Warranty

• 3 years parts and labor.

• 5 years parts on the compressor and condenser.

Certification

Chewable, slow-melting ice that allows for more reliable dispensing.

H 2Nugget Ice

(1.9 x 0.8 x 0.95 cm) 3/4” x 5/16” x 3/8”

• Warranty valid in North, South & Central America for commercial installations.

• Contact factory for warranty in other regions.

D E S I G N E D

ENGINEERED

ASSEMBLED

USAIN

H E

• Residential Applications: 1 year parts and labor

DOE

9001:2015

R4650 dreid Highlight

I ce

M a ch in e

D is p e n se r

1-800-SCOTSMAN Fax: 847-913-9844 customer.relations@scotsman-ice.comwww.scotsman-ice.com

101 Corporate Woods Parkway, Vernon Hills, IL 60061

Accessories

4” Adjustable legs, box of 4, plastic with metallic foot.

Machine stand for HID525 and HID540, with locking reversible door and shelf.

KLP24A

HST21-A

Machine stand for HID525 and HID540, basic version.HST21B-A

Model Number Description

Scotsman recommends all ice machines have water filtration. See Scotsman water filter specification sheet for details.

Specifications and design are subject to change without notice.

Operating Requirements

Minimum

Air Temperatures Water Temperatures

Potable Water Pressures Electrical Voltage

50°F (10°C) 40°F (4.4°C)

20 PSIG (1.4 bar) -5%

100°F (38°C) 100°F (38°C)

80 PSIG (5.5 bar) +10%

Maximum

All Models

Dimensions (W x D x H):

Unit:

HID540A-1:

HID540AW-1:

HID540A-1:

HID540AW-1:

21.25” x 24.38” x 41” 23.25” x 24.38” x 41”

HID540W-1: 21.25” x 24.38” x 41”

24.25” x 27.13” x 47.5” 24.25” x 27.13” x 47.5”

HID540W-1: 24.25” x 27.13” x 47.5”

Shipping Carton:

Refrigerant: R-404A

Shipping Weight: HID540A-1: 215lb / 98kg

HID540W-1: 215lb / 98kg HID540AW-1: 220lb / 100kg

BTUs per hour: HID540A-1: 6,800

HID540AW-1: 6,800

54.2 21.36

21.25

10.2 4.00

OPTION LEGS

ADJUSTABLE

47.3 18.62

ICE CHUTE

REMOVABLE

AIR FILTER

61.9 24.38

103.8 40.88

27.9 11.00

0.3 .12

59.7 23.50

5.1 2.01

7.7 3.02

10.2 4.00

36.8 14.50

9.7 3.80

UTILITY

CHASE

1.17

4.6 1.805.1

2.00

18.9 7.45

12.5 4.94

17.8 7.00

POWER

CORD

3/4" FPT

DRAIN

1/2 FPT

CONDENSER

DRAIN

(WC ONLY)

3/8 FPT

CONDENSER

WATER INLET

(WC ONLY)

3/8" FLARE

WATER INLET

AIR FLOWAIR FLOW

BACK VIEWRIGHT SIDE VIEWFRONT VIEW

21.25

59.1 23.25

WALL MOUNT

BRACKET

53.3 21.00

REMOVABLE

AIR FILTER

ICE CHUTE

WATER CHUTE

61.9 24.38

14.95

103.8 40.88

17.33

2.5 1.00

OFFSET

FROM

WALL 5.1

2.01

UTILITY

CHASE

7.7 3.02

5.50

16.9 6.66

9.7 3.80

UTILITY

CHASE

17.9 7.05

0.8 .312

(6) WALL

MOUNT HOLES

5.50

40.6 16.00

5.1 2.00

3/8" FLARE

WATER INLET

3/4" FPT

DRAINPOWER

CORD

BACK VIEWRIGHT SIDE VIEWFRONT VIEW

AIR FLOWAIR FLOW

HID540 - Ice Machine / Dispenser Ice and Water Dispenser

With Wall Mount: HID540AW

Without Wall Mount: HID540A & HID540W

All models include 7.5’ power cord with NEMA 5-15P plug

Installation Note: Allow 6” space at left, back and right side for ventilation and utility connections.

R4650 dreid Highlight chris.phillips Typewritten Text Stand is optional. Assumption for this project is counter mounted unit with no stand.

1-800-SCOTSMAN Fax: 847-913-9844 customer.relations@scotsman-ice.comwww.scotsman-ice.com

101 Corporate Woods Parkway, Vernon Hills, IL 60061

Features

M a ch in e S ta n d s

HST Stands for Meridian Series Ice & Water Dispensers IOBDMS Stands for ID Series Ice Only Dispensers

Machine Stands

H ST Stands for M eridian Series &

S Stands for ID

Series

Certification

Dimensions (W x D x H)

Warranty

* Includes 6” legs

HST16-A

HST21-A

IOBDMS22

IOBDMS30

Model #

HID312

HID525 & HID540

ID150

ID200 & ID250

Compatible Dispenser

16.5” x 23.75” x 32” (41.9 x 60.3 x 81.3 cm)

21.5” x 23.75” x 32” ( 54.6 x 60.3 x 81.3 cm)

HST16B-A

HST21B-A

HID312

HID525 & HID540

16.5” x 23.75” x 32” (41.9 x 60.3 x 81.3 cm)

21.5” x 23.75” x 32” ( 54.6 x 60.3 x 81.3 cm) 22” x 30” x 30” (55.8 x 76.2 x 76.2 cm) 30” x 30” x 30” (76.2 x 76.2 x 76.2 cm)

W x D x H*

• 1 years parts and labor on all components.

Shipping Information

Model # Carton (W x D x H) Weight (lb/kg)

HST16-A

HST21-A

IOBDMS22

IOBDMS30

17.5” x 25” x 32.5”

23” x 25” x 32.5”

26” x 32” x 27” 34” x 33” x 28”

50/23

80/36

HST16B-A

HST21B-A

17.5” x 25” x 32.5”

23” x 25” x 32.5”

50/23

80/36 93/42

120/54

Stainless steel construction for optimum durability.

Space saving design.

Includes reversible locking door for maximum functionality.

Inside cabinet features ample storage space with a steel shelf.

Includes 6” adjustable legs.

Designed to fit perfectly with Meridian dispensers.

Back panel designed for easy dispenser utility.

HST16-A & HST21-A

Stainless steel construction for optimum durability.

Designed to have utility connections hidden from view.

IOBDMS22 & IOBDMS30

HST16B-A & HST21B-A

Stainless steel construction for optimum durability.

Space saving design.

Includes 6” adjustable legs.

Designed to fit perfectly with Meridian dispensers.

Back panel designed for easy dispenser utility.

HST21-AHST16-A HST21B-AHST16B-A

IOBDMS22 & IOBDMS30

• Warranty valid in North, South & Central America for commercial installations.

• Contact factory for warranty in other regions.

D E S I G N E D

ENGINEERED

ASSEMBLED

USAIN

H E

• Residential Applications: 1 year parts and labor

9001:2015

R4650 dreid Highlight dreid Highlight chris.phillips Typewritten Text Stand is optional. Assumption for this project is counter mounted unit with no stand.

chris.phillips

M a ch in e S ta n d s

S ta nd s fo r

M er id ia n Se rie s

S S ta nd s fo r

S er ie s

1-800-SCOTSMAN Fax: 847-913-9844 customer.relations@scotsman-ice.comwww.scotsman-ice.com

101 Corporate Woods Parkway, Vernon Hills, IL 60061

HST Stands for Meridian Series Ice & Water Dispensers IOBDMS Stands for ID Series Ice Only Dispensers

Machine Stands

.29 HINGE

16.50

.38

HID MOUNTING

BRACKET

26.00

6.00

ADJUSTABLE

TO 7.00

13.20

26.00

16.50 .38

HID MOUNTING

BRACKET

6.00

ADJUSTABLE

TO 7.00

13.20

23.75

12.50

UTILITY

CHASE

2.00

UTILITY

CHASE

15.75 3.86

21.50 .38

HID MOUNTING

BRACKET

26.00

6.00

ADJUSTABLE

TO 7.00

18.20

26.00

21.50 .38

HID MOUNTING

BRACKET

.29 HINGE

6.00

ADJUSTABLE

TO 7.00

18.20

23.75

17.50

UTILITY

CHASE

2.00

UTILITY

CHASE

15.75 3.86

HST16

HST21

FRONT: HST16-A FRONT: HST16B-A

FRONT: HST21-A FRONT: HST21B-A

R4650 chris.phillips

NOMENCLATURE Refrigerator/Freezer,20 Cubic Feet JSN R7250

Acq/Ins V / V - Government Furnished, Government Installed Weight (lbs) 240 Weight (kg) 109

Height (in) 70 Height (cm) 178

Width (in) 33 Width (cm) 84

Depth (in) 36 Depth (cm) 91

Utility 1: Plumbing . |

Utility 2: Electrical A | 120 volt, conventional outlet

Utility 3: Med Gas . |

Utility 4: Misc Gas . |

Utility 5: Non-Med Gas . |

Utility 6: Misc . |

PHASE 1

AMPS 15

VOLTS 120

HERTZ 60

BTU / HR 0

WATTS 1800

Description Refrigerator/freezer unit. This type unit includes a food saver system that helps keep food fresher. It also includes roll out wheels and is equipped for an optional automatic icemaker. This unit is of commercial or residential design and use.

Weights and Measures (Typical Only)

Utilities NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to develop

Frigidaire

Top Freezer Refrigerator

20.5 Cu. Ft. Top Freezer Refrigerator

FRTD2021AS, FRTD2021AW, FRTD2021AB

Available Colors : Stainless Steel, White, Black

Version : 09/21

Refrigerator Door Stops Yes Air Filter No Front Rollers No Crisper Color Clear Rear Rollers Yes Dairy Bin Yes Door Bin Color White Dimensions and Volume Humidity Controls Manual Height With Hinge 69" Interior Lighting LED Height Without Hinge 68 1/4" Shelf Material Glass Width 30" Water Filter No Width of Cabinet 29 5/8" Number of Fixed Gallon Door Bins 1 Depth of Cabinet 28 1/2" Number of Other Door Bins 2 Depth With Door 31 3/4" Total Number of Door Bins 3 Depth With Door 90° Open 60" Number of Adjustable Shelves 2 Depth With Door and Handle 34 1/8" Number of Fixed Shelves 1 Freezer Capacity 5.15 Cu. Ft.

Number of Crispers 2 Fresh Food Capacity 15.3 Cu. Ft.

Total Capacity 20.5 Cu. Ft.

Freezer Automatic Defrost Yes Electrical Specifications Door Bin Color White Amps @ 120 Volts 3 Amps Shelf Material Wire Minimum Circuit Required 15 Amps Number of Fixed Door Bins 2 Total Number of Door Bins 2 General Specifications Number of Adjustable Shelves 1 Annual Energy 430 kWh Total Number of Shelves 1 Condenser Type Dynamic Leveling Legs Yes Ice Maker Prop 65 Label Yes Ice Maker No Refrigerant Type R-600A Ice Maker Ready Yes Warranty - Labor 1 Year Warranty - Parts 1 Year Controls Control Location Top Center of Fresh

Food Certifications and Approvals

Digital Display No ADA Compliant No Door Ajar Alarm No Performance Certifications and

Approvals Exterior ENERGY STAR Certified No Door Finish Textured

Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes.

Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com / frigidaire.ca Specifications subject to change. Accessories information available on the web at frigidaire.com / frigidaire.ca

USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca

R7250 http://frigidaire.com/ http://frigidaire.ca/ http://frigidaire.com/ http://frigidaire.ca/ http://frigidaire.com/ http://frigidaire.ca/

Frigidaire

20.5 Cu. Ft. Top Freezer Refrigerator FRTD2021AS, FRTD2021AW, FRTD2021AB

Version : 09/21

Safety Certifications and Approvals CSA Listed Yes UL Listed No ETL Listed No

Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes.

USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca

R7250 http://frigidaire.com/ http://frigidaire.ca/ http://frigidaire.com/ http://frigidaire.ca/ http://frigidaire.com/ http://frigidaire.ca/ http://www.tcpdf.org

NOMENCLATURE Sterilizer,Stm,VAC,2DO,RCSD 1WLL,24x36x60 Chamber JSN S0535

Weight (lbs) 3185 Weight (kg) 1445

Height (in) 90 Height (cm) 229

Width (in) 40 Width (cm) 102

Depth (in) 77 Depth (cm) 196

Utility 1: Plumbing B | Cold water and drain

Utility 2: Electrical F | Special electrical requirements

Utility 3: Med Gas D | Air, high pressure (85 PSIG) max

Utility 4: Misc Gas A | Steam

Utility 5: Non-Med Gas . |

Utility 6: Misc T | CAT 6 to nearest T-Comm Room

PHASE 3

AMPS 15

VOLTS 480

HERTZ 50/60

BTU / HR 5620

WATTS

Description A recessed mounted (through one wall), double door (right or left-hinged, appropriate door configurations to be indicated on equipment elevation drawings), vacuum, sterilizer utilizing facility supplied steam. The unit is controlled by a microcomputer that monitors and controls all unit operations and functions and provides both audible and visual indications of deviations. A printer-recorder documents and records each cycle performance. For general purpose pre-vacuum or gravity steam sterilization of hospital and laboratory supplies at temperatures in the range from 110°C to 135°C (230°F to 275°F). A liquid cycle is also provided at temperatures in the range from 100°C to 121°C (212°F to 250°F). Door may be power operated.

Weights and Measures (Typical Only)

Utilities NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to develop

GETINGE Steam Sterilizer Model 67N17, 67", DD-RH, Recessed, Display Beside

Construction Rough-In Drawings

Getinge 1777 E Henrietta Rd

Rochester, NY 14623 Dwg. 9615-042, Rev.

11-30-2020

Image may not represent actual model

S0535

Rob Wilkinson Stamp

Getinge Surgical Workplaces Disinfection and Sterilization Products

Project Responsibilities

Component Designed by/Materials Provided By

Performed By Timing/Project Phase

Getinge

Product specifications, Construction Rough In drawings

GETINGE GETINGE

At time of purchase order or customer signed GETINGE

Drawing Package

General Contractor Design, Fabrication of space for egress, wall opening, foot print and utility rough-in for each piece of equipment

Customer or General contractor per GETINGE

Construction Rough In drawing

Customer’s Engineer of Record/Architect and General Contractor.

Based upon overall construction schedule

In Wall Chair Carriers GETINGE Customer’s specified General contractor

Based upon overall construction schedule

Plumbing Contractor

Cold Water, Hot Water, RO Water, Steam, Condensate and Air supply lines to within 5 running feet of equipment’s connection point. Drain

Customer or Plumbing contractor using GETINGE

Construction Rough In drawing or customer signed GETINGE

Drawing Package

Customer’s/GC specified Plumbing contractor

While ceilings and walls are open during plumbing/electrical/mechanical installation

Floor Sinks and/or Drains

Customer or Plumbing contractor using GETINGE

Construction Rough In drawing or customer signed GETINGE

Drawing Package

Customer’s/GC specified Plumbing contractor

Based upon overall construction schedule

Ball and Gate Valves for all supply lines with threads for easier connections

Customer or Plumbing contractor using Industry approved valves and materials

Customer’s/GC specified Plumbing contractor

While ceilings and walls are open during plumbing/electrical/mechanical installation

Water, Steam, condensate and Air connections between equipment and facility supply lines

GETINGE using GETINGE Construction Rough In drawing or customer signed GETINGE

Drawing Package

GETINGE

Except where local code require a state licensed plumber or

Union Area

During Equipment Installation

Electrical Contractor

Duplex, “J” box and Fused Electrical Disconnect

Customer or Plumbing contractor using GETINGE

Construction Rough In drawing or customer signed GETINGE

Drawing Package

Customer’s/GC specified Electrical contractor

While ceilings and walls are open during plumbing/electrical/mechanical installation

All branch circuit wiring and conduit (primary and secondary) external to GETINGE supplied equipment

Customer or electrical contractor using GETINGE

Construction Rough In drawing or customer signed GETINGE

Drawing Package

Customer’s/GC specified Electrical contractor

While ceilings and walls are open during plumbing/electrical/mechanical installation

Electrical final terminations between Utilization

Equipment Outlet boxes and facility power

Customer or electrical contractor using GETINGE

Construction Rough In drawing or customer signed GETINGE

Drawing Package

Customer’s/GC specified Electrical contractor After equipment installation

S0535

Mechanical Contractor Exhaust Ducts and gravity line vents Customer or Mechanical contractor using GETINGE Construction Rough In drawing or customer signed GETINGE

Drawing Package

Customer’s/GC specified Mechanical contractor

While ceilings and walls are open during plumbing/electrical/mechanical installation

All branch duct and gravity line vents

Customer or Mechanical contractor using GETINGE

Construction Rough In drawing or customer signed GETINGE

Drawing Package

Customer’s/GC specified Mechanical contractor

While ceilings and walls are open during plumbing/electrical/mechanical installation

Installation Contractor (Non-Union)

Uncrating of equipment N/A GETINGE if installation purchased per sales agreement

Based upon overall construction schedule

Equipment Installation N/A GETINGE if installation purchased per sales agreement

During equipment installation phase based on project schedule Disposal of shipping containers and packing debris to an on installation site customer provided receptacle

N/A

GETINGE if installation purchased per sales agreement

As required during equipment installation phase based on project schedule

Final Installation Checkout N/A GETINGE if installation purchased per sales agreement

After Equipment Installation

In-service

Training of Equipment Operation: cycle selection, start, stop, abort, reset, loading, unloading

GETINGE GETINGE Following Equipment Installation

Customer

Receive, off load and storage of equipment in secured protected area N/A

Customer or customer designated shipping contractor

Based upon overall construction schedule

Disposal of any existing equipment N/A Customer After removal from existing location

Notes

1. Minimum of thirty (30) working days notification will be required for scheduling installation. Additional costs may be billed if less than 30 days’ notice is given.

2. Installation is performed during the hours of 8 a.m. to 5 p.m. excluding weekends and holidays. Overtime charges will apply after 5:00 p.m. and during weekends/holidays.

3. Removal of asbestos or equipment subject to disposal regulations of federal, state or local governments is not included. Pricing must be obtained through local hazardous waste contractors.

4. Pricing does not provide for union labor.

5. Scope of installation work is based upon timely and uninterrupted access, site conditions and utility availability.

Additional visits due to work stoppage beyond the control of Getinge will be billed directly to the buyer at prevailing rates.

6. Purchaser shall provide a site that is compatible to accept the egress of equipment into building, foot print, wall openings, utility supply lines, immediate access valves and which complies with any applicable requirements of any governmental authority.

7. The equipment ordered will be shipped in large crates and ingress into building requires specific height and width.

This includes the path to the final installation location. Dimensions will be provided upon request.

8. If equipment is stored off site, it is the customer’s responsibility to transport equipment to the installation site.

9. Getinge provides layout drawings based on information and/or facility drawings provided. Getinge provides these drawings for reference only to the contractor and architect. It will be the responsibility of the contractor to verify the dimensions for placement within the building based on the required dimensions provided by Getinge.

10. Wall thickness is indicated on the installation/arrangement drawings. For recessed equipment between one or two walls, please pay close attention to the wall thickness indicated to prevent interference with the equipment installation and operation. Wall thickness for the Getinge equipment is vitally important for proper installation, location, fit and function within the facility.

11. Floor protection to protect facility floors during installation is not provided by Getinge.

12. For the purpose of service, Getinge requires adequate permanent lighting in the enclosed service areas of the sterilizer and washer.

13. 120V duplex electrical receptacle recommended in the service area.

Rev P 9/1/2020

AutoCAD SHX Text

VIEW - SIDE

AutoCAD SHX Text 4"

AutoCAD SHX Text 6'-6"

AutoCAD SHX Text

ALL DIMENSIONS GIVEN ARE FROM FINISHED SURFACES.

AutoCAD SHX Text

DIMENSIONS ARE FEET-INCHES [MILLIMETERS].

AutoCAD SHX Text

VIEW - PLAN

AutoCAD SHX Text

VIEW - FRONT

AutoCAD SHX Text

OUTLET TANK

AutoCAD SHX Text

OPTIONAL INTEGRAL STEAM GENERATOR (E)

AutoCAD SHX Text

CONTROL CABINET B = OPTIONAL LOCATION

AutoCAD SHX Text

CONTROL SIDE

AutoCAD SHX Text

NON CONTROL SIDE

AutoCAD SHX Text

UNIT SHOWN IS A GSS 67N17

AutoCAD SHX Text VACUUM PUMP STANDARD LOCATION CAN ALSO BE LOCATED REMOTELY UP TO 50' (15m) FROM STERILIZER, ON THE SAME FLOOR OR BELOW.

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text HEATING OPTIONS: A = HOUSE STEAM E = ELECTRIC - INTEGRAL ELECTRIC STEAM GENERATOR D = INTEGRAL STEAM TO STEAM GENERATOR

AutoCAD SHX Text NOTES: S1) CLEARANCE SHOWN ARE MINIMAL FOR EQUIPMENT FUNCTION AND SERVICING. CHECK STATE AND LOCAL CODES FOR APPLICABLE CLEARANCE REQUIREMENTS.

AutoCAD SHX Text

MACHINE FOOT

AutoCAD SHX Text 2'-8 "14"

AutoCAD SHX Text

WALL CONNECTION PROFILE

AutoCAD SHX Text POWER CABINET - STANDARD MOUNTING LOCATION SEE DWG E2, SHT 9, FOR OPTIONAL MOUNTING OPTIONS

AutoCAD SHX Text

CONTROL SIDE

AutoCAD SHX Text

CUSTOM TRIM IS AN OPTION

AutoCAD SHX Text 2'-3 "12"

AutoCAD SHX Text

DISPLAY PANEL BESIDE

AutoCAD SHX Text

CONTROL CABINET A = STANDARD LOCATION

AutoCAD SHX Text

SERVICE AREA - RECOMMENDED

AutoCAD SHX Text

SERVICE AREA

AutoCAD SHX Text

CLEARANCE

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text 8"

AutoCAD SHX Text

SERVICE AREA - MIN.

AutoCAD SHX Text MAX FLOOR DEVIATION FLAT AND LEVEL WITHIN 1/8" (3mm) UNDER UNIT

AutoCAD SHX Text APPROACH AREA TO BE FLAT AND LEVEL WITHIN 1/8" (3mm)

AutoCAD SHX Text

FINISHED WALL TO FINISHED WALL

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SHEET #:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DJL

AutoCAD SHX Text

NONE

AutoCAD SHX Text

REV

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

AutoCAD SHX Text 9615-042

AutoCAD SHX Text

DRAWING NUMBER / FILE NAME:

AutoCAD SHX Text

REVISION:

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text MODEL 67N17 STEAM STERILIZER, DOUBLE DOOR, RIGHT SERVICE, RECESSED THROUGH WALL, 67" CHAMBER, DISPLAY BESIDE CHAMBER, ROUGH-IN DRAWING (STRUCTURAL)

9/1/2020

%%uNOTICE: Work by others

AutoCAD SHX Text herein as well as any other normally accepted electrical, mechanical or plumbling interface between user's supply

AutoCAD SHX Text Safe and efficient operation of this product is dependent upon the owner/user providing the services specified

AutoCAD SHX Text and this product. Getinge USA will not assume responsibility for problems that result from non-compliance with

AutoCAD SHX Text the above conditions. The following conditions and services are required by Getinge USA equipment and are to be

AutoCAD SHX Text provided by others.

AutoCAD SHX Text 26x24x67

AutoCAD SHX Text

AutoCAD SHX Text 2.8

AutoCAD SHX Text

AutoCAD SHX Text 3.7

AutoCAD SHX Text 660x610x1700

AutoCAD SHX Text 0:34

AutoCAD SHX Text 0:59

AutoCAD SHX Text

AutoCAD SHX Text 11270

AutoCAD SHX Text

PERFORMANCE AND DIMENSIONS

AutoCAD SHX Text Process Time, metal load

AutoCAD SHX Text Usable Space (WxHxL) Inside Chamber

AutoCAD SHX Text Loading Capacity

AutoCAD SHX Text Sterilizer Weight

AutoCAD SHX Text Sound Power Level LwA

AutoCAD SHX Text Sound Pressure Level LpA

AutoCAD SHX Text Heat Generation

AutoCAD SHX Text (h:mm)

AutoCAD SHX Text (mm)

AutoCAD SHX Text Instrument trays

AutoCAD SHX Text (kg)

AutoCAD SHX Text (lbs)

AutoCAD SHX Text (dBA)

AutoCAD SHX Text (kW)

AutoCAD SHX Text (kg)

AutoCAD SHX Text (lbs)

AutoCAD SHX Text

AutoCAD SHX Text <70

AutoCAD SHX Text Heat Generation

AutoCAD SHX Text (kW)

AutoCAD SHX Text OPTION: INTEGRAL ELECTRICAL STEAM GENERATOR (E) OPTION: INTEGRAL STEAM TO STEAM GENERATOR (D)

AutoCAD SHX Text Sterilizer weight

AutoCAD SHX Text Comments

AutoCAD SHX Text Prevac 1, 135 C including 16 min vacuum drying.

AutoCAD SHX Text 25 lbs (11.3 kg) per tray

AutoCAD SHX Text Packaging not included

AutoCAD SHX Text SS-EN 285:2024+A2:2009 and ISO 3746:2010

AutoCAD SHX Text Heat dissipated to the surrounding

AutoCAD SHX Text Packaging not included

AutoCAD SHX Text

EMPTY

AutoCAD SHX Text

FULL

AutoCAD SHX Text (Btu/hr)

AutoCAD SHX Text (inch)

AutoCAD SHX Text

CONTROL PANEL OPTIONS: : A = CONTROL END B = REMOTE END

AutoCAD SHX Text

POWER CABINET OPTIONS: SEE DRAWING E2, ON SHT 9

AutoCAD SHX Text HEATING OPTIONS: A = HOUSE STEAM E = ELECTRIC - INTEGRAL ELECTRIC STEAM GENERATOR D = INTEGRAL STEAM TO STEAM GENERATOR

AutoCAD SHX Text TOTAL HEAT DISSIPATED FROM STERILIZER WITH EMPTY CHAMBER AND 2 DOORS BOTH CLOSED AT AN AMBIENT TEMP OF 23° C (73° F) +/- 2° C (36° F). HEAT DISSIPATED AT THE FRONT IS 2218 BTU/SIDEWITH CLOSED DOOR AND 5937 BTU/SIDE WITH OPEN DOOR.

AutoCAD SHX Text

MINIMUM CLEARANCE REQUIRED FOR MOVING INTO POSITION:

AutoCAD SHX Text

DISMANTLED:35.43"W X 66.14"H X 80.71"L [900W X 1680H X 2050L].

AutoCAD SHX Text 39.37"W X 85.83"H X 80.71"L + 7.87" [1263W X 2180H X 2050L + 200].

AutoCAD SHX Text

(HEIGHT INCLUDES 5.91" [150MM] BOTTOM OF PACKING)

AutoCAD SHX Text

OPTION: HOUSE STEAM (A)

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SHEET #:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DJL

AutoCAD SHX Text

NONE

AutoCAD SHX Text

REV

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

AutoCAD SHX Text 9615-042

AutoCAD SHX Text

DRAWING NUMBER / FILE NAME:

AutoCAD SHX Text

REVISION:

AutoCAD SHX Text

AutoCAD SHX Text S2

AutoCAD SHX Text MODEL 67N17 STEAM STERILIZER, DOUBLE DOOR, RIGHT SERVICE, RECESSED THROUGH WALL, 67" CHAMBER, DISPLAY BESIDE CHAMBER, ROUGH-IN DRAWING (STRUCTURAL)

AutoCAD SHX Text 9/1/2020 chris.phillips Highlight chris.phillips Line

ALL DIMENSIONS GIVEN ARE FROM FINISHED SURFACES.

AutoCAD SHX Text

DIMENSIONS ARE FEET-INCHES [MILLIMETERS].

AutoCAD SHX Text

UNIT SHOWN IS A GSS 67N17

AutoCAD SHX Text

= CENTER OF GRAVITY

AutoCAD SHX Text HEATING OPTIONS: A = HOUSE STEAM E = ELECTRIC - INTEGRAL ELECTRIC STEAM GENERATOR D = INTEGRAL STEAM TO STEAM GENERATOR

AutoCAD SHX Text

A MODEL VIEW - FRONT

AutoCAD SHX Text

CONTROL SIDE

AutoCAD SHX Text

NON CONTROL SIDE

AutoCAD SHX Text

CONTROL SIDE

AutoCAD SHX Text

NON CONTROL SIDE

AutoCAD SHX Text

E & D MODEL VIEW - FRONT

AutoCAD SHX Text

A MODEL VIEW - FRONT - LOADING SIDE

AutoCAD SHX Text

E & D MODEL VIEW - FRONT - LOADING SIDE

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SHEET #:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DJL

AutoCAD SHX Text

NONE

AutoCAD SHX Text

REV

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

AutoCAD SHX Text 9615-042

AutoCAD SHX Text

DRAWING NUMBER / FILE NAME:

AutoCAD SHX Text

REVISION:

AutoCAD SHX Text

AutoCAD SHX Text S3

AutoCAD SHX Text MODEL 67N17 STEAM STERILIZER, DOUBLE DOOR, RIGHT SERVICE, RECESSED THROUGH WALL, 67" CHAMBER, DISPLAY BESIDE CHAMBER, ROUGH-IN DRAWING (STRUCTURAL)

CW S

AS E

S0535

AutoCAD SHX Text

VIEW - SIDE

AutoCAD SHX Text

VIEW - FRONT

AutoCAD SHX Text HEATING OPTIONS: A = HOUSE STEAM E = ELECTRIC - INTEGRAL ELECTRIC STEAM GENERATOR D = INTEGRAL STEAM TO STEAM GENERATOR

AutoCAD SHX Text

ALL DIMENSIONS GIVEN ARE FROM FINISHED SURFACES.

AutoCAD SHX Text

DIMENSIONS ARE FEET-INCHES [MILLIMETERS].

AutoCAD SHX Text

UNIT SHOWN IS A GSS 67N10

AutoCAD SHX Text

FINISHED FLOOR

AutoCAD SHX Text

*SITE UTILITY DROP RECOMMENDATION*

AutoCAD SHX Text

CW = CITY WATER

AutoCAD SHX Text

AS = AIR SUPPLY

AutoCAD SHX Text

S = STEAM (A)

AutoCAD SHX Text

D = PROCESS DRAIN

AutoCAD SHX Text

E = ELECTRICAL (A)

AutoCAD SHX Text

N = NETWORK

AutoCAD SHX Text

UTILITY

AutoCAD SHX Text

SIZE TO UNIT

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1/4"

AutoCAD SHX Text

FLOOR SINK W/ 3" DRAIN

AutoCAD SHX Text

RJ45

AutoCAD SHX Text

REQUIRED SUPPLY

AutoCAD SHX Text 44-87 psi

AutoCAD SHX Text

(3-6 BAR)

AutoCAD SHX Text

SHEET REFERENCE

AutoCAD SHX Text

SHEET 6 (P2)

AutoCAD SHX Text

100 MBIT/S

AutoCAD SHX Text

DROP DOWN MENU

AutoCAD SHX Text 87-116 psi

AutoCAD SHX Text

(6-8 BAR)

AutoCAD SHX Text

<140%%DF (<60%%DC)

AutoCAD SHX Text 36-50 psi

AutoCAD SHX Text

E = ELECTRICAL (E)

AutoCAD SHX Text

SHEET 10 (E3)

AutoCAD SHX Text

DROP DOWN MENU

AutoCAD SHX Text

E = ELECTRICAL (D)

AutoCAD SHX Text

E = ELECTRICAL (COMBINED A & E)

AutoCAD SHX Text

DROP DOWN MENU

AutoCAD SHX Text

DROP DOWN MENU

AutoCAD SHX Text

FW = FEED WATER (DI QUALITY)

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 44-87 psi

AutoCAD SHX Text

(3-6 BAR)

AutoCAD SHX Text 2'-1 "12"

AutoCAD SHX Text

FINISHED WALL

AutoCAD SHX Text 2'-1 "12"

AutoCAD SHX Text 1'-3"

AutoCAD SHX Text 1'-11"

AutoCAD SHX Text 2'-3"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 1'-7"

AutoCAD SHX Text

FINISHED FLOOR

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text 2'-1 "34"

AutoCAD SHX Text 1'-3"

AutoCAD SHX Text 1'-8"

AutoCAD SHX Text

(2 -3 BAR)12-3 BAR)12 BAR)

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SHEET #:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DJL

AutoCAD SHX Text

NONE

AutoCAD SHX Text

REV

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

AutoCAD SHX Text 9615-042

AutoCAD SHX Text

DRAWING NUMBER / FILE NAME:

AutoCAD SHX Text

REVISION:

AutoCAD SHX Text

AutoCAD SHX Text S4

AutoCAD SHX Text MODEL 67N17 STEAM STERILIZER, DOUBLE DOOR, RIGHT SERVICE, RECESSED THROUGH WALL, 67" CHAMBER, DISPLAY BESIDE CHAMBER, ROUGH-IN DRAWING (STRUCTURAL)

AutoCAD SHX Text 9/1/2020 chris.phillips Line chris.phillips Line chris.phillips Line

VIEW - SIDE

AutoCAD SHX Text

VIEW - TOP

AutoCAD SHX Text

CONTROL CABINET STANDARD LOCATION A

AutoCAD SHX Text

CONTROL CABINET OPTIONAL LOCATION B

AutoCAD SHX Text

STEAM TO STEAM GENERATOR OPTION

AutoCAD SHX Text S

AutoCAD SHX Text

SV2

AutoCAD SHX Text

SV1

AutoCAD SHX Text V

AutoCAD SHX Text 5'-0 "34"

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text

CW2

AutoCAD SHX Text

CW1

AutoCAD SHX Text D

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

ALL DIMENSIONS GIVEN ARE FROM FINISHED SURFACES.

AutoCAD SHX Text

DIMENSIONS ARE FEET-INCHES [MILLIMETERS].

AutoCAD SHX Text

UNIT SHOWN IS A GSS 67N10

AutoCAD SHX Text THIS PAGE SHOWS THE ON-UNIT CONNECTION POINTS. REFER TO SHT 4 (S4) FOR RECOMMENDED ROUGH-IN LOCATIONS.

AutoCAD SHX Text

SEE SHT 7 FOR UTILITY CHART

AutoCAD SHX Text S

AutoCAD SHX Text

SV1

AutoCAD SHX Text

SV2

AutoCAD SHX Text D

AutoCAD SHX Text

CW1

AutoCAD SHX Text C

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text V

AutoCAD SHX Text

CW2

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SHEET #:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DJL

AutoCAD SHX Text

NONE

AutoCAD SHX Text

REV

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

AutoCAD SHX Text 9615-042

AutoCAD SHX Text

DRAWING NUMBER / FILE NAME:

AutoCAD SHX Text

REVISION:

AutoCAD SHX Text

AutoCAD SHX Text P1

AutoCAD SHX Text MODEL 67N17 STEAM STERILIZER, DOUBLE DOOR, RIGHT SERVICE, RECESSED THROUGH WALL, 67" CHAMBER, DISPLAY BESIDE CHAMBER, ROUGH-IN DRAWING (PLUMBING)

AutoCAD SHX Text

AutoCAD SHX Text 0.5

AutoCAD SHX Text

AutoCAD SHX Text 2.6

AutoCAD SHX Text

AutoCAD SHX Text 0.5

AutoCAD SHX Text

AutoCAD SHX Text 2.6

AutoCAD SHX Text

AutoCAD SHX Text 0.25

AutoCAD SHX Text

AutoCAD SHX Text 23885

AutoCAD SHX Text 47770

AutoCAD SHX Text HEATING OPTIONS: A = HOUSE STEAM E = ELECTRIC - INTEGRAL ELECTRIC STEAM GENERATOR D = INTEGRAL STEAM TO STEAM GENERATOR

AutoCAD SHX Text Connection

AutoCAD SHX Text Central Steam

AutoCAD SHX Text City Water

AutoCAD SHX Text Air Supply

AutoCAD SHX Text Drain

AutoCAD SHX Text Condensate Return

AutoCAD SHX Text City Water

AutoCAD SHX Text Units *

AutoCAD SHX Text (kg)

AutoCAD SHX Text (lbs)

AutoCAD SHX Text (l)

AutoCAD SHX Text (gal)

AutoCAD SHX Text (nm³))

AutoCAD SHX Text (cu.ft)

AutoCAD SHX Text (l)

AutoCAD SHX Text (gal)

AutoCAD SHX Text OPTION: Condensate Return [G2201]

AutoCAD SHX Text (l)

AutoCAD SHX Text (gal)

AutoCAD SHX Text Option Chilled Water Recirculation [G2401]

AutoCAD SHX Text (l)

AutoCAD SHX Text (gal)

AutoCAD SHX Text Cooling Water - Inlet

AutoCAD SHX Text Cooling Energy to Chilled Water

AutoCAD SHX Text System

AutoCAD SHX Text (l)

AutoCAD SHX Text (gal)

AutoCAD SHX Text (kWh)

AutoCAD SHX Text (Btu)

AutoCAD SHX Text Feed Water

AutoCAD SHX Text Steam

AutoCAD SHX Text HEATING OPTION:(E) Integral Electrical Steam Generator [G2101]

AutoCAD SHX Text (l)

AutoCAD SHX Text (gal)

AutoCAD SHX Text Feed Water

AutoCAD SHX Text HEATING OPTION:(D) Integral Steam to Steam Generator [G2102]

AutoCAD SHX Text (kg)

AutoCAD SHX Text (lbs)

AutoCAD SHX Text (l)

AutoCAD SHX Text (gal)

AutoCAD SHX Text

OPTION: HVAC FOR UNITS WITH CONTROLS BESIDE

AutoCAD SHX Text Ventilation connections shall be

AutoCAD SHX Text connected to ventilation system

AutoCAD SHX Text

(CFM)

AutoCAD SHX Text 1 door: 64 CFM

AutoCAD SHX Text Valid when controls BESIDE the door

AutoCAD SHX Text 2" square 50.8 mm square

AutoCAD SHX Text

EMPTY

AutoCAD SHX Text

FULL

AutoCAD SHX Text Consumption/cycle (Prevac 1)

AutoCAD SHX Text

AutoCAD SHX Text Peak/h

AutoCAD SHX Text 2.5-3.5 bar (g)

AutoC…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jan 7, 2026.