6077-Question_and_Answer_Addendum-1.pdf
PDF 243 KB Posted
- Solicitation number
- 32-12-6077
- Issued by
- California
About this file
This is a bid addendum from the California Department of Transportation (Caltrans) Division of Equipment for Solicitation No. 32-12-6077, with a bid due date of May 5, 2016 at 2:15 PM. The addendum addresses a single question and answer regarding body compartment specifications, specifically clarifying that the water can rack shown in drawing I-01283-01 is not required in the contract, despite the drawing showing it within the forward-most 12 inches of the top surface of the curbside body compartments.
The document emphasizes that this addendum must be included with the submitted solicitation, and failure to return the form may result in bid rejection. The addendum is dated April 28, 2016, and appears to be related to vehicle or equipment specifications, though the specific type of vehicle or equipment is not mentioned in this document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 6077-IFB.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
State of California
California Department of Transportation - Division of Equipment
INVITATION FOR BID ADDENDUM
BID DUE DATE: 05/05/2016 SOLICITATION NO. REV DATE PURCHASE ESTIMATE NO.
BID OPENING: 2:15 PM 32-12-6077 1 04/28/2016 32-12-6077
THIS BID ADDENDUM MUST BE INCLUDED WITH SUBMITTED SOLICITATION
FAILURE TO RETURN THIS FORM MAY BE CAUSE FOR BID REJECTION
ADDENDUM # 1 QUESTION AND ANSWERS
1. Question: Specification 01283-032-161T, Page 9 of 19, Under No. 15 BODY GENERAL
ASSEMBLY – “The forward most 12 inches of the top surface of the body compartments shall be left clear for installation of a light rack by State of California personnel.” The water can, item 102, on drawing I-01283-01, appears to be within the forward most 12 inches of the top surface of the curbside body compartments. Is there another location you would like to locate the water can?
Answer: No water can rack is required in this contract. The drawing is for reference only, and not all components shown are required.
File details come from the government source that posted it. Updated .