6-Specifications Requirements Confirmation Form.pdf
PDF 132 KB Posted
- Attached to
- One (1) Remote Slope Mower
- Solicitation number
- RFQ 2026-0036
- Issued by
- Chatham County, Georgia
About this file
This is a Specifications/Requirements Confirmation Form for RFQ 2026-0036 issued by the Savannah Airport Commission (SAC) in Georgia for the procurement of one (1) remote slope mower. The unit must be a new, current production, tracked machine with a front-mounted or dedicated flail mowing implement designed for remote-controlled operation on steep slopes, drainage ditches, embankments, stormwater ponds, and other difficult-to-access terrain commonly found at commercial airports. The mower shall be capable of cutting and managing dense grasses, woody vegetation, vines, and brush up to 2 inches in diameter while allowing the operator to remain safely outside the designated hazard zone during all operations. The unit must comply with all applicable state and federal safety and emissions regulations and be delivered fully assembled, installed, serviced, and ready for operation with all standard equipment, software, accessories, and charging infrastructure provided by the original equipment manufacturer.
Bidders are required to complete the Specifications/Requirements Confirmation Form by indicating compliance with each requirement by placing a "Y" (Yes) or "N" (No) in the corresponding boxes. The unit shall include 4 sets of keys with FOBs if applicable at the time of delivery and shall have no dealer decals. For any specifications marked "N," bidders must clearly identify and explain deviations or exceptions on a designated Exceptions Sheet. A complete copy of the specifications must be included in the bid response and uploaded to Bonfire as part of the submission. The form does not specify pricing terms, contract term, award date, or response deadline information in the provided document.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFQ 2026-0036
One (1) Remote Sloper Mower
SPECIFICATIONS/REQUIREMENTS CONFIRMATION FORM
SPECIFICATIONS: Bidders shall place a checkmark next to each requirement/specification that is applicable and inclusive with the unit. For any requirement or specification that is not included, please leave the corresponding circle blank and clearly note the exception on the designated Exceptions Sheet. A complete copy of the specifications must be included in this section of your bid response and uploaded to Bonfire as part of your submission.
(1) Remote Slope Mower
● Minimum specifications for the unit are as follows:
o The unit shall be new, current production, and purpose-built for remote-controlled slope mowing and brush cutting.
o The unit shall be a tracked machine with front-mounted or dedicated flail mowing implement suitable for grass, weeds, vines, and brush clearing.
o The unit shall be designed to allow the operator to remain off the machine and safely outside the designated hazard zone during all mowing operations.
o The unit shall be capable of safely mowing and managing vegetation on steep slopes, drainage, ditches, embankments, stormwater ponds, perimeter areas, and other difficult-to-access terrain commonly encountered at commercial airports.
o The unit shall be suitable for maintaining vegetation in areas where conventional ride-on mowing equipment may present increased safety risks due to slope, terrain, or ground conditions.
o The unit shall be capable of cutting and managing dense grasses, woody vegetation, vines, and brush up to 2 inches in diameter.
o Keys Required: 4 sets (with FOBS if applicable) at the time of delivery with unit o No Dealer Decals
(Minimum Technical Requirements Follows on Next Page)
SPECIFICATIONS: Bidders shall indicate compliance with each requirement/specification by placing a “Y” (Yes) in the box associated with the specification if the proposed unit meets or exceeds the requirement, or an “N” (No) if the proposed unit does not meet the requirement.
For each specification marked “N,” the bidder shall clearly identify and explain the deviation or exception on the designated Exceptions Sheet.
| o The unit shall be new, current production, and purpose-built for remote-controlled slope mowing and brush cutting. |
| o The unit shall be a tracked machine with front-mounted or dedicated flail mowing implement suitable for grass, weeds, vines, and brush clearing. |
| o The unit shall be designed to allow the operator to remain off the machine and safely outside the designated hazard zone during all mowing operations. |
| o The unit shall be capable of safely mowing and managing vegetation on steep slopes, drainage, ditches, embankments, stormwater ponds, perimeter areas, and other difficult-to-access terrain commonly encountered at commercial airports. |
| o The unit shall be suitable for maintaining vegetation in areas where conventional ride-on mowing equipment may present increased safety risks due to slope, terrain, or ground conditions. |
| o The unit shall be capable of cutting and managing dense grasses, woody vegetation, vines, and brush up to 2 inches in diameter. |
| o Keys Required: 4 sets (with FOBS if applicable) at the time of delivery with unit |
| o No Dealer Decals |
| (Minimum Technical Requirements Follows on Next Page) |
| SPECIFICATIONS: Bidders shall indicate compliance with each requirement/specification by placing a “Y” (Yes) in the box associated with the specification if the proposed unit meets or exceeds the requirement, or an “N” (No) if the proposed unit does n... |
| For each specification marked “N,” the bidder shall clearly identify and explain the deviation or exception on the designated Exceptions Sheet. |
File details come from the government source that posted it. Updated .