523 19 602 Project Manual Part 2.pdf

JAMES LANDAU, PE PLLC

A2.0 STRUCTURAL and PHYSICAL SECURITY REPORT

This document records observations made by the author and Tim Bleck on July 8, 2021. During this visit, Bleck and Landau, with the assistance of campus police, observed the camera views for the existing, exterior site security cameras. This effort was performed in the late afternoon, when there was daylight, and again after sunset. Between the afternoon and evening events, Bleck and Landau walked the site to observe cameras that were not recorded previously and to formulate thoughts on potential new camera locations. Proposals for new camera locations are not included in this report.

This report refers to the accompanying camera inventory drawing for arbitrarily assigned camera numbers. On this trip, we were not able to positively identify the camera make and model for all cameras. Unless noted by an “f” in the camera number, the exterior cameras are either fisheye or PTZ cameras. At this time, it is not known if the PTZ cameras are digital or analog. The fisheye cameras appear to be Axis M3007 cameras.

Low-light conditions were challenging for all of the PTZ cameras mounted at building top corners.

There were large dark areas in the views that were caused by either lack of lighting at the ground level and/or by lack of dynamic range capability in the camera. Many of the site light fixtures were either not operational or had inoperable lamps during our review, making evaluation of camera coverage difficult.

Camera 1 This PTZ camera is mounted at the top corner (3 stories) of the Ambulatory Care building. The view from this camera is blocked to the north by new construction. The range of viewing is mostly limited to views of South Huntington, but these are also blocked to a great degree by trees along South Huntington. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition.”

Camera 2 This PTZ camera is mounted at the top corner (13 stories) of Building 1. The view from this camera is generally toward Heath Street at the northern campus limits and to the entrance to lot 2. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition” in essentially every direction observed.

Camera 3 This PTZ camera is mounted at the top corner (6 stories) of Building 1. The view from this camera is generally toward Heath Street at the northern campus limits and typically observes the entrance into lot 7. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition” in essentially every direction observed.

Camera 4f This fixed camera is mounted on the face of Building 5. The view from this camera is directed toward equipment on the ground directly in front of the building. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition.”

Camera 5 This PTZ camera is mounted at the top corner (5 stories) of Building 1. The view from this camera is generally toward the vehicle round-about outside of the rear entrance to Building 1 and the area out to the vehicular gate near Building 5. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition” in essentially every direction observed.

Camera 6 This PTZ camera is mounted at the top corner (5 stories) of Building 1. The view from this camera is generally toward the east property boundary near Building 4 and Lot 6. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition” in essentially every direction observed.

Cameras 7 and 8 These cameras are mounted on the face of the MRI trailer. It is believed that these camera views are not available to or accessible by the VA.

Camera 9 This PTZ camera is mounted at the top corner (2 stories) of Building 1 over the main entrance. The view from this camera is generally toward vehicle round-about outside of the main entrance to Building 1 and the area out to lot 1 in front of Building 2. A good portion of this camera view is obstructed by trees. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition” in essentially every direction observed.

Cameras 10 and 11 These fisheye cameras are mounted under the soffit of the canopy at the main entrance to Building

1. Camera 10 is typically configured for 4 views that observe the walkway. Camera 11 is mostly observing the area near the bicycle rack behind the guard house. The resolution for these cameras is somewhere between “recognition” and “identification.” The resolution is not sufficient for reading license plate numbers, which is a condition that was noted by police personnel as unfortunate.

Camera 12f This fixed camera is mounted on the south face of Parking Garage 3A. The view from this camera is directed toward the vehicle gate entering lot 9. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition.”

Camera 13 This pole-mounted camera appears to be positioned to view lot 9 and the alley west of Building 9.

The camera appears to be a PTZ camera, but the camera was frozen in a locked position while we were on site. This camera appears to otherwise be well situated for the intended views.

Camera 14 This PTZ camera is mounted at the top corner (4 stories) of Building 9 over the main entrance. The view from this camera is generally toward the vehicle round-about outside of the main entrance to Building 9 and lot 9. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition” in essentially every direction observed.

Cameras 15 and 18 These cameras are mounted at the top corners of Building 9, facing Evergreen Street. These camera views could not be located in any of the NVR’s. It could not be determined if these cameras were operational.

Cameras 16f and 17f These fixed cameras are located under the soffit of a canopy over basement doors into Building 9 from the alley. These cameras observe foot and vehicular traffic in the alley to the west of Building 9.

For individuals in close proximity to the cameras, “identification” level resolutions are possible.

Camera 19f This is a fixed camera mounted on the east side of Building 4 and has a view of the small piece of property between Building 4 and the existing property fence. Other than a view of one of the horseshoe posts, its purpose appears to be rather limited. We did not evaluate the resolution of the camera on this visit.

Camera 20f This is a fixed camera mounted on the east face of Building 5 (Boiler Plant) and provides a view of the personnel door on that side of the building. We did not evaluate the resolution of the camera on this visit.

Camera 21f This is a fixed camera mounted on the north face of Building 5 (Boiler Plant) and provides a view of the property on the north side of the building. We did not evaluate the resolution of the camera on this visit.

Camera 22 This PTZ camera is mounted at the top corner (3 stories) of the Ambulatory Care building. The view from this camera is blocked to the north by new construction, but previously could provide viewing towards Heath Street. The range of viewing is mostly limited to views of the courtyard on the north side of the lobby between Building 1 and Ambulatory Care. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition.”

Cameras 23 and 24 These fisheye cameras are mounted to the north and south faces of the guard shack, less than 10 feet from grade. These cameras provide views of pedestrian traffic between the parking garages and Building 1. For individuals in close proximity to the cameras, “identification” level resolutions are possible.

Camera 25 This PTZ camera is mounted at the top corner (3 stories) of Building 1A - Research. The view from this camera is generally toward Lot 1, the area containing mechanical and electrical units, and Lot 6.

The view from this camera is partially obstructed by the liquid nitrogen tank adjacent to Building 1A.

The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition” in essentially every direction observed.

Camera 26 This PTZ camera is mounted at the top, rear corner (4 stories) of Building 2 – Huntington House.

The view from this camera is generally toward Lot 1 in front of the Huntington House and to the roof of the Patient Garage. The mounting height and resolution for the camera limit its resolution to somewhere between “observe” and “recognition” in essentially every direction observed.

THINKFORM DESIGN ARCHITECT LLC

A3.0 Cut Sheets

3.1 Prefabricated Guardhouse

3.2 Site Security

3.3 Operations Room Furnishings

3.4 Electrical

A3.1 Guardhouse

Prefabricated Guardhouse

Secure Your Perimeter and Protect Your Facility With B.I.G.

Blast Resistant Technology

Protecting the perimeter—and ensuring the safety of those who guard it—is the first line of defense from a blast threat to a critical facility. State of the Art Blast Resistant protection is now available on custom, prefabricated steel guardhouses and booths manufactured by B.I.G. Enterprises, Inc. that are designed to withstand the highest threat levels, enabling security personnel inside to respond and initiate emergency procedures, saving lives and property.

B.I.G. Has a Serious Response to Your Security Concerns – The Highest Level of Blast Resistance in the Industry

Blast Resistance—one of the post 9/11 security requirements in specific industries—presents a special manufacturing challenge.

Working extensively with the leading ballistics engineers and suppliers of ballistic resistant materials to develop this technology, B.I.G. employs highly specialized materials such as fiberglass composites and armor-plated steel on their custom steel booths to achieve the highest level of blast resistance in the industry.

B.I.G.'s Blast and Bullet Resistant booth materials have been tested by the National Institute of Justice (NIJ), H.P. White and/or Underwriters Laboratory (UL).

Their ready-to-use booths can be built from Level 1 up to NIJ-IV and 50 caliber armor piercing. B.I.G.

has also obtained a Blast Resistant certification on their manufacturing technique, a first in the industry.

Special features such as continu-ous stainless steel hinges on blast resistant doors enable them to support the armored weight and ensure easy handling without failure. B.I.G. has designed and perfected several gun ports allowing for large caliber weapons or small handguns. Both are easily operated and secure.

B.I.G. Bullet and Blast Resistant booths have been specified in hundreds of recent security upgrades in key government, nuclear, chemical, agricultural, water treatment facilities, and financial institutions. B.I.G.’s extensive client list includes the Nuclear Regulatory Committee, all branches of United States Armed Forces, and hundreds of prominent and (previously) vulnerable facilities (not mentioned by name due to national security concerns).

An Experienced Team of Ballistics – Savvy Sales and Engineering Staff at Your Command

B.I.G.’s sales and engineering team is highly knowledgeable about ballistics resistance and is ready to consult with you on your specific security requirements.

Whatever protection you require—whether from small arms such as a 9mm handgun, or 50 caliber armor piercing weapons, or a bomb/blast—we have the experience to work with you.

We know what works and what doesn’t, so when it comes to protecting your people and your property, let B.I.G.’s years of experience work for you.

B.I.G. is Serious About Security

When the Stakes are High, the Solution is B.I.G.

Tank Tuff with a Serious Array of Options For over 40 years, B.I.G. has engi-neered and manufactured the highest quality custom steel booths in the industry—offered with a wealth of options including bullet and/or blast resistance. Our large selection (over 305 models to date) of pre-assembled build-ings includes guardhouses, cashier booths, and portable buildings, all delivered pre-manufactured, pre-wired, fully painted, glazed and ready for installation.

9702 East Rush Street South El Monte, CA 91733-1730

1.800.669.1449 • F 626.448.3598 www.bigbooth.com inquiries@bigbooth.com

Threat Level Chart

.22 Long Rifle 40 gr. lead 1050 1090 5

.38 special 158 gr. lead 850 900 5

9 mm 124 gr. FMJ 1175 1292 3

.357 MAG 158 gr. JSP 1395 1445 5

.357 MAG 158 gr. JSP 1250 1375 3

.44 MAG 250 gr. SWC (GC) 1400 1450 5

9 mm 124 gr. FMJ 1400 1450 5

.44 MAG 240 gr. SWC (GC) 1350 1485 3

9 mm 124 gr. FMJ 1400 1540 5

7.62 x 39 M43 mild steel pin 2350 2400 5

7.62 x 51 M80 2750 2800 5

.30-06 180 gr. lead core soft point 2540 2794 1

7.62 x 51 M80 2750 3025 1

7.62 x 51 M80 2750 3025 5

5.56 x 45 M193 3080 3388 5

PLEASE NOTE: The UL threat level numbering sequence does not reflect the respective severity of the levels. For example, UL 7 is a more severe threat than UL 8; UL 4 is a more severe threat than UL 6.

B.I.G. also offers NIJ-IV, and higher, call for details.

NIJ I

NIJ II

NIJ IIIA

NIJ III

(AK-47)

Standard Ammunition Specifications Impact Velocity

(FPS)

Min Max

Number of Hits

A3.2 Site Security

Fencing

When installing these security elements use Impasse II as a platform:

Communication & Video Cables Intrusion Detection / Fiber Optic Cables Access Control Wiring Conduits Anti-Ram Cabling (Stalwart)

AMERISTARFENCE.COM | 888-333-3422

Military Sites Government Facilities Petroleum & Chemical Facilities Power Plants & Substations Airports Data Centers Ports of Entry Water Treatment & Storage j j j j j j j j

P R

IM

A

R Y

AP

PL

IC

AT

IO

NS

DESIGN INTEGRATION

This integrated design eliminates the need for costly trenching and boring becoming a value added solution for perimeter security upgrades.

HIGH SECURITY STEEL PALISADE FENCING

j j j j j

Maintaining a secure perimeter is your first line of defense against potential threats. Impasse II fence systems serve as a visual deterrent backed with heavy steel components that give a higher level of protection compared to the traditional chain link or architectural mesh fence alternatives. Impasse II is the best choice for securing at risk facilities or protecting specific assets within a property.

GROUNDABLE DESIGN

Impasse II is the first coated fence system that has been successfully tested to IEEE grounding standards.

AMERIST

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM

HIGH SECURITY STEEL PALISADE FENCING

2.75"w x 14ga PALES | 2" x 2" x 11ga RAILS | 3" x 2.75" x 12ga & 4" x 2.75" x 11ga I-BEAM POSTS

STYLE OPTIONS

Gauntlet shown

STRONGHOLD ™

8¾"

GAUNTLET ™TRIDENT ™

Impasse II Anti-Scale option is also available

FABRICATION & DESIGN

Impasse II panels and posts are manufactured using high-tensile pre-galvanized G-90 steel. Each component has been roll-formed into a unique profile that yields significant strength properties.

mpasse II’s distinct design enables the fence to traverse aggressive changes in grade in order to maintain security along any perimeter. Each connection point of the Impasse II system is secured with tamper-proof fasteners providing the highest level of security and versatility.

PERMACOAT ™PROTECTIVE FINISH

Ameristar’s production facilities use a state-of-the-art polyester powder coating system that provides a durable and scratch resistant finish. Impasse II is protected with Ameristar’s PermaCoat multi-layer coating process. The combination of these layers delivers a system that increases weathering resistance and product durability. The Ameristar coating system results in finished surfaces with unmatched performance.

15 YEAR LIMITED WARRANTY

Impasse II is coated using Ameristar’s PermaCoat process, this dual-coat finish yields the best results for durability and weathering in the fence industry. Ameristar has over 25 years of experience and research in coating fence products allowing Impasse to support a 15 year warranty.

DOMESTIC MANUFACTURING

Ameristar is committed to providing products that are manufactured in the USA. We have made significant investments in technology, process improvement, and employee training in an effort to secure American jobs and combat inferior import products.

PANELS REQUIRE ASSEMBLY

Refer to construction specification & tables within this section for recommended post space by bracket type

PANELS REQUIRE ASSEMBLY

15"

VA

R

IE

S

W

IT

H H

EI

G

H T

8' NOMINAL

36" MINIMUM

FOOTING DEPTH

Trident panel shown

3" x 2.75" x 12ga / 4" x 2.75" x 11ga I-BEAM POSTS

2.75"sq x 14ga PALES

2"sq x 11ga RAILS

6', 7', 8', 9' & 10' PANEL HEIGHTS

A

C

A

B

C

D

IMPASSE II ® | 2 & 3-RAIL OPTIONS | 3.25" AIR-SPACE

STANDARD BOTTOM

D

B 27" section for recommended post space by bracket type

Effective: 04/01/20

TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM | 5.3

IMPASSE II

| HIGH SECURITY STEEL FENCE

IMPASSE II ®

PATENT NUMBERS: 6874767, 7188826, 7651073, 7942384,

8382070, 8720866, 10577825, D655826

IMPASSE II ® | 2-RAIL PANELS

STANDARD BOTTOM | 8' PANEL LENGTH (95" actual width) | 16 PALES PER PANEL | ASSEMBLY REQUIRED

= FENCE STYLES AVAILABLE | T = Trident S = Stronghold G = Gauntlet†

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

= NON-STOCKED PRODUCT

For details, see Ameristar's Sales Policy in the catalog guide.

PANEL ITEM NUMBER WEIGHT STOCKING

6' 3 20708R1 149 lbs

7' 3 20828R1 168 / 187†

8' 3 20948R1 187 / 208†

TRIDENT ™

GAUNTLET ™

STRONGHOLD ™

8¾"

IMPASSE II ® | 3-RAIL PANELS

STANDARD BOTTOM | 8' PANEL LENGTH (95" actual width) | 16 PALES PER PANEL | ASSEMBLY REQUIRED

= FENCE STYLES AVAILABLE | T = Trident S = Stronghold G = Gauntlet†

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

= NON-STOCKED PRODUCT

For details, see Ameristar's Sales Policy in the catalog guide.

PANEL ITEM NUMBER WEIGHT STOCKING

6' 3 30708R1 166 lbs

7' 3 30828R1 186 / 205†

8' 3 30948R1 205 / 225†

9' 3 31068R1 224 / 246†

10' 3 31188R1 243 / 267†

TRIDENT ™

GAUNTLET ™

STRONGHOLD ™

8¾"

Effective: 04/01/20

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM5.4

IMPASSE II

| HIGH SECURITY STEEL FENCE

IMPASSE II ®

IMPASSE II ® ANTI-SCALE | 3-RAIL PANELS | 1.375" AIR-SPACE

STANDARD BOTTOM | 8' PANEL LENGTH (95" actual width) | 23 PALES PER PANEL | ASSEMBLY REQUIRED

= FENCE STYLES AVAILABLE | T = Trident S = Stronghold G = Gauntlet†

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

= NON-STOCKED PRODUCT

For details, see Ameristar's Sales Policy in the catalog guide.

PANEL ITEM NUMBER WEIGHT STOCKING

6' 3 30708R1AS 166 lbs

7' 3 30828R1AS 186 / 205†

8' 3 30948R1AS 205 / 225†

9' 3 31068R1AS 224 / 246†

10' 3 31188R1AS 243 / 267†

TRIDENT ™

GAUNTLET ™

STRONGHOLD ™

8¾"

Effective: 04/01/20

TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM | 5.5

IMPASSE II

Effective: 04/01/20

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM5.6

IMPASSE II

| HIGH SECURITY STEEL FENCE

IMPASSE II ®

IMPASSE II ® | RAILS

RAIL LENGTH ITEM NUMBER WEIGHT

95" RIM -8* 16.6 lbs

95" S R95N1** 16.6 lbs

95" RIM -8-ACRA*◊ 16.6 lbs

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

* For 8' Trident, Stronghold & Gauntlet WITH HOLES. Rails do not include fasteners, see following page for Fastener Kit (IRBFASTGR).

** For 8' Trident, Stronghold & Gauntlet WITHOUT DRILL HOLES.

◊ For ANTI-SCALE SPACING

RAIL WITH HOLES

RAIL WITHOUT HOLES

IMPASSE II ® | BRACKETS

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

DESCRIPTION ITEM NUMBER BAG QTY BOX QTY WEIGHT

Corner Bracket Kit MP 610R 1 50 1.0 lbs

MPB610 Kit Contains: (1) Impasse II Corner Bracket | (4) .3125" x .875" Carriage

(Spur) Bolts | (5) .3125" Tri Groove Security Nuts | (1) .3125" Washer | (1) .3125" x

.75" Elevator Bolt | (2) (.3125" x 1.125" Carriage Bolts | (2) .375" x .825" Screws |

(2) .3125" Flange Nuts | (2) .375" Nuts | (1) Instruction Flyer

Gate Post Bracket Kit MP 607R 1 80 .50 lbs

MPB607 Kit Contains: (1) Impasse II Flat Mount Bracket | (2) .375" x 1.375" Screws

| (1) .3125" x .875" Carriage (Spur) Bolt | (1) .3125" Flange Nut | (1) .3125" x .75"

Carriage Bolt | (1) .3125" Tri Groove Security Nut | (1) Instruction Flyer

Flat Strap Bracket Kit B 022R2 1 80 .5 lbs

BB022 Kit Contains: (1) Impasse II Flat Strap Bracket | (2) .3125" x .875" Carriage

(Spur) Bolts | (2) .3125" Tri Groove Security Nuts

NOTE: For 4" posts, must be cut to fit 3" posts correctly

TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM | 5.7

IMPASSE II

| HIGH SECURITY STEEL FENCE

IMPASSE II ®

IMPASSE II ® | CUSTOM FINISHES

WARRANTY ON RAILS CUT VOID WITHOUT PROPER APPLICATION OF ZINC RICH PRIMER & TOUCH-UP PAINT PENS

PAINT PEN

.5 lbs / P 100

SPRAY PAINT

1.1 lbs / F 100

ZINC-RICH PAINT PEN

.5 lbs / PZ100

ZINC-RICH PRIMER

1.1 lbs / FZ100

IMPASSE II ® | FASTENERS

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

C-Rail Groundable Fastener 5/16"-18 x 1-1/8" IRBFASTGR 2 .11 lbs

Kit Contains: (2) 5/16"-18 x 1-1/8" Carriage Sput Bolt (2-0065-1) | (2) 5/16-18 Tri Groove Security Nut (3-0032-1)

DESCRIPTION SIZE ITEM NUMBER BAG QTY ITEM WEIGHT

Carriage (Spur) Bolt .3125" x .875" 2-0066- P-20* 20 .6 lbs

.3125" x 1.125" 2-0065- P-20** 20 .7 lbs

Impasse Ground Lug Kit n/a 5-0026-UP 2 .9 lbs

Kit Contains: (2) .5" x 1.5" Screw (1-0050-UP-20) | (2) .5" x 1.5" Washer (4-0031-UP-20)

NOTE: 29/64" pilot hole must be drilled into I-beam flange.

Tri Groove Security Nut .3125" 3-0032- P 20 .4 lbs

Fastener Socket n/a 6-0058PFG 1 .06 lbs

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

= COLOR OPTIONS AVAILABLE | 1 = Black 2 = Bronze 3 = Sand 4 = White

* = For the pale to rail connection ** = For the rail to I-beam connection

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM5.8

IMPASSE II

| HIGH SECURITY STEEL FENCE

IMPASSE II ®

IMPASSE II ® | ORNAMENTAL STEEL SQUARE POSTS

8"sq. x .25 wall

6"sq. x .1875 wall

4"sq. x 11 ga.

3"sq. x 12 ga.

POST LENGTH ITEM NUMBER WEIGHT

9' P 30108 39 lbs

10' P 30120 43 lbs

11' P 30132 47 lbs

12' P 30144 51 lbs

13' P 30156 56 lbs

14' P 30168 60 lbs

15' P 30180 64 lbs

16' P 30192 69 lbs

9' P 40108 61 lbs

10' P 40120 67 lbs

11' P 40132 74 lbs

12' P 40144 81 lbs

13' P 40156 87 lbs

14' P 40168 94 lbs

15' P 40180 101 lbs

16' P 40192 108 lbs

9' P 60108 131 lbs

10' P 60120 145 lbs

11' P 60132 160 lbs

12' P 60144 174 lbs

13' P 60156 189 lbs

14' P 60168 203 lbs

15' P 60180 218 lbs

16' P 60192 232 lbs

9' P 80108 233 lbs

10' P 80120 259 lbs

11' P 80132 285 lbs

12' P 80144 311 lbs

13' P 80156 336 lbs

14' P 80168 370 lbs

15' P 80180 390 lbs

16' P 80192 415 lbs

STEEL POSTS

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM | 5.9

IMPASSE II

| HIGH SECURITY STEEL FENCE

IMPASSE II ®

IMPASSE II ® | STEEL PLATED SQUARE POSTS

IMPASSE II ® | STEEL POST CAPS

4"sq. x 11ga.

3"sq. x 12ga.

POST LENGTH PLATE SIZE ITEM NUMBER WEIGHT

6' 6" sq. x .25" / .5625" holes (5003G) P 30072P 30 lbs

7' 6" sq. x .25" / .5625" holes (5003G) P 30084P 34 lbs

8' 6" sq. x .25" / .5625" holes (5003G) P 30096P 39 lbs

9' 6" sq. x .25" / .5625" holes (5003G) P 30108P 43 lbs

10' 6" sq. x .25" / .5625" holes (5003G) P 30120P 47 lbs

6' 8" sq. x .375" / .5625" holes (8876G) P 40072P 47 lbs

7' 8" sq. x .375" / .5625" holes (8876G) P 40084P 54 lbs

8' 8" sq. x .375" / .5625" holes (8876G) P 40096P 61 lbs

9' 8" sq. x .375" / .5625" holes (8876G) P 40108P 67 lbs

10' 8" sq. x .375" / .5625" holes (8876G) P 40120P 74 lbs

STEEL POSTS

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

CAP SIZE ITEM NUMBER WEIGHT

3"sq. A 508 0.3 lbs

4"sq. A 509 0.4 lbs

6"sq. A 515 0.8 lbs

8"sq. A 801 2 lbs

STANDARD FLAT CAP

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM5.10

IMPASSE II

| HIGH SECURITY STEEL FENCE

IMPASSE II ®

3" I-BEAM

4" I-BEAM

LENGTH ITEM NUMBER HOLE QTY WEIGHT STOCKING

8' 3P 2096-32 2 36 lbs

8' 3P 3096-32 3 36 lbs

9' 3P 2108-32 2 40 lbs

9' 3P 3108-32 3 40 lbs

10' 3P 2120-32 2 45 lbs

10' 3P 3120-32 3 45 lbs

10' 3P 3120-42 3 45 lbs

11' 3P 3132-42 3 49 lbs

12' 3P 3144-42 3 54 lbs

HEIGHT ITEM NUMBER LENGTH WEIGHT STOCKING

6' IPK 708 46.625" 38 lbs

7' IPK 828 58.625" 45 lbs

8' IPK 948 70.625" 55 lbs

9' IPK 1068 82.625" 67 lbs

10' IPK 1188 94.625" 77 lbs

DESCRIPTION ITEM NUMBER SIZE BOX QTY WEIGHT STOCKING

3" I-Beam Post Cap I C3 3.375" 30 .5 lbs

4" I-Beam Post Cap I C4 4.4375" 30 .5 lbs

Rail Cover IRC81 94" n/a 1 lbs

Sensor Wire Clip SWC100 n/a 100 2 lbs

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

= NON-STOCKED PRODUCT

For details, see Ameristar's Sales Policy in the catalog guide.

IMPASSE II ® | I-BEAM POSTS, POST CAPS & ACCESSORIES

3" & 4" I-BEAM POSTS

PRIVACY KITS

I-BEAM POST CAP

SENSOR CLIP

DESCRIPTION ITEM NUMBER SIZE BOX QTY WEIGHT STOCKING

3" I-Beam Grounding Cap IUC3 3.375" 30 .5 lbs

4" I-Beam Grounding Cap

IUC4 4.4375" 30 .5 lbs

I-BEAM GROUNDING CAP

NOTE: Caps are uncoated aluminum.

NOTE: Single kit above is for 1 entire panel.

IMPASSE II® | CONSTRUCTION SPECIFICATION 32 31 19

HIGH SECURITY STEEL FENCE SYSTEM | ORNAMENTAL PALE

PART 1 - GENERAL

1.01 WORK INCLUDED

The contractor shall provide all labor, materials and appurtenances necessary for installation of the steel corrugated pale security fence system defined herein at

(specify project site).

1.02 RELATED WORK

Section ___ ___ - Earthwork

Section ___ ___ - Concrete

1.03 SYSTEM DESCRIPTION

The manufacturer shall supply a total steel ornamental pale high security fence system of the Ameristar® Impasse II®

(specify Trident™, Stronghold™ or Gauntlet™) design. The system shall include all components (i.e., pales, rails, posts, gates and hardware) required.

1.04 QUALITY ASSURANCE

The contractor shall provide laborers and supervisors who are thoroughly familiar with the type of construction involved and materials and techniques specified.

1.05 REFERENCES

• ASTM A653/A653M – Standard Specification for Steel

Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy Coated

(Galvannealed) by the Hot-Dip Process

• ASTM B117 – Practice for Operating Salt-Spray (Fog) Apparatus

• ASTM D523 – Test Method for Specular Gloss

• ASTM D714 – Test Method for Evaluating Degree of

Blistering in Paint

• ASTM D1654 – Test Method for Evaluation of Painted or

Coated Specimens Subjected to Corrosive Environments

• ASTM D2244 – Test Method for Calculation of Color Differences from Instrumentally Measured Color Coordinates

• ASTM D2794 – Test Method for Resistance of Organic

Coatings to the Effects of Rapid Deformation (Impact)

• ASTM D3359 – Test Method for Measuring Adhesion by Tape Test

• ASTM D6695 - Standard Practice for Xenon-Arc Exposures of

Paint and Related Coatings

• ASTM F2408 – Ornamental Fences Employing Galvanized

Steel Tubular Pickets

• IEEE P80/D10 Draft Guide for Safety in AC Substation

Grounding

• IEEE 142-1991 IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems

• IEEE 81-2012 IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials for

Ground System

1.06 SUBMITTAL

The manufacturer's submittal package shall be provided prior to installation.

1.07 PRODUCT HANDLING AND STORAGE

Upon receipt at the job site, all materials shall be checked to ensure that no damage occurred during shipping or handling.

Materials shall be stored in such a manner to ensure proper ventilation and drainage, and to protect against damage, weather, vandalism and theft.

1.08 PRODUCT WARRANTY

A. All structural fence components (i.e. rails, pickets, and posts) shall be warranted within specified limitations, by the manufacturer for a period of 15 years from date of original purchase. Warranty shall cover any defects in material finish, including cracking, peeling, chipping, blistering or corroding.

B. Reimbursement for labor necessary to restore or replace components that have been found to be defective under the terms of manufactures warranty shall be guaranteed for five (5) years from date of original purchase.

1.09 PRODUCT TESTING & COMPLIANCE

A. Fence system shall be tested by third party professional engineer to IEEE P80/D10, IEEE 142-1991 and IEEE 81-

2012. Test report shall be supplied showing fence system meeting acceptable range for resistance and impedance required within the IEEE standards listed here within.

PART 2 - MATERIALS

2.01 MANUFACTURER

The steel ornamental pale high security fence system shall conform to Ameristar Impasse II (specify Trident, Stronghold or Gauntlet) (specify 2-Rail or 3-Rail) style manufactured by

Ameristar Fence Products, Inc., in Tulsa, Oklahoma.

2.02 MATERIAL

A. Steel material for fence framework (i.e., corrugated pales, rails and posts), when galvanized prior to forming, shall conform to the requirements of ASTM A924/A924M, with a minimum yield strength of 45,000 psi (310 MPa). The steel shall be hot-dip galvanized to meet the requirements of ASTM A653/A653M with a minimum zinc coating weight of 0.90 oz/ft2 (276 g/m2), Coating Designation G-90.

B. Material for corrugated pales shall be a nominal 2.75" x .75" x 14 Ga. The cross-sectional shape of the rails shall conform to the manufacturer's Impasse II rail design a nominal 2" x

2" x 11 Ga. Pre-drilled holes in the Impasse II rail shall be

• IEEE 81-2012 IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials for

Ground System p to the manufacturer's Impasse II rail design a nominal 2" x

2" x 11 Ga. Pre-drilled holes in the Impasse II rail shall be

Effective: 04/01/20

TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM | 5.11

IMPASSE II

spaced 6" on center, providing a pale airspace of no greater than 3.25" for standard air space and 1.375" for anti-scale spacing. Tamperproof grounding fasteners shall be used to fasten each pale to rail at every intersection as well as rail to

I-Beam. Posts shall conform to the manufacturer's Impasse

II I-Beam design with a nominal 3" x 2.75" x 12 Ga. for fence panel heights up to & including 8’ height and/or Impasse II

I-Beam design with a nominal 4" x 2.75" x 11 Ga. for fence heights greater than 8’ up to 10’ panel height. Fence posts and gate posts shall meet the minimum size requirements of Table 1.

C. If applicable - Material for steel Impasse II privacy screening shall be 18ga. preformed slats, providing complete screening coverage between pales and at pale to post connections.

Impasse II privacy screening shall provide screening from top rail to bottom rail, and be capable of traversing terrain without impeding the raking capabilities of the fencing panel.

2.03 FABRICATION

A. Pales, rails and posts shall be pre-cut to specified lengths.

Impasse II rails shall be pre-punched to accept tamperproof security fasteners. Post flange shall be pre-punched to accept rail to post attachment. Post web shall be punched providing a clear opening for interior of rails to align throughout the entire system for affixing conduit, video cabling, IDS wiring, and other components for a complete systems integration.

Impasse II rails shall be attached to post flange providing a bracket-less design at each intermediate post.

B. The manufactured galvanized framework shall be subjected to the PermaCoat® thermal stratification coating process (high-temperature, in-line, multi-stage, multi-layer) including, as a minimum, a six-stage pretreatment/wash, an electrostatic spray application of an epoxy base, and a separate electrostatic spray application of a polyester finish. The base coat shall be a thermosetting epoxy powder coating (gray in color) with a minimum thickness of 2 mils (0.0508mm). The topcoat shall be a “no-mar” TGIC polyester powder coat finish with a minimum thickness of 2 mils (0.0508mm). The color shall be (specify Black, Bronze, White, or Desert Sand). The stratification-coated framework shall be capable of meeting the performance requirements for each quality characteristic shown in Table 2.

SEE REFERENCED TABLES ON THE FOLLOWING PAGE

IMPASSE II® | CONSTRUCTION SPECIFICATION 32 31 19

HIGH SECURITY STEEL FENCE SYSTEM | ORNAMENTAL PALE

C. Completed panels shall be capable of supporting a 400 lb. load

(applied at midspan) without permanent deformation. Panels shall be biasable to a 30˚ change in grade.

D. Swing gates shall be fabricated using 2" sq. x 12ga rail, 2" sq.

x 12ga. gate ends, and 2.75" x .75" x 0.075 pales. Gates that exceed 6' in width will have a 2" sq. x 11ga. intermediate upright.

All rail and upright intersections shall be joined by welding. All pale and rail intersections shall also be joined by welding.

E. Sliding cantilever gates shall be TransPort IS design matching style, height, and color of fence system. The dual enclosed track slide gate shall be an aluminum component design using tracks, uprights, pales, hardware, fittings, and fasteners. Gate installation shall comply with latest ASTM F2200 standards for automated gates, regardless if the gate is of manual operation.

F. System shall be designed to minimize system impedance in compliance with IEEE requirements. No additional grounding material beyond installation of structure to ground lug and

I-Beam grounding cap will be required to achieve lowered system impedance levels.

PART 3 - EXECUTION

3.01 PREPARATION

All new installation shall be laid out by the contractor in accordance with the construction plans.

3.02 FENCE INSTALLATION

Fence post shall be spaced according to Table 3, plus or minus ¼".

For installations that must be raked to follow sloping grades, the post spacing dimension must be measured along the grade. Fence panels shall be attached to the line and end posts with fasteners supplied by the manufacturer. Attachment to corner post shall be made using brackets and fasteners supplied by the manufacturer

(See Figure 1). Posts shall be set in concrete footers having a minimum depth of 36" (Note: In some cases, local restrictions of freezing wheather conditions may require a greater depth). The

"Earthwork" and "Concrete" sections of this specification shall govern material requirements for the concrete footer. Posts setting by other methods such as plated posts or grouted core-drilled footers are permissible only if shown by engineering analysis to be sufficient in strength for the intended application.

SEE REFERENCED TABLES ON THE FOLLOWING PAGE

Effective: 04/01/20

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM5.12

IMPASSE II

IMPASSE II® | CONSTRUCTION SPECIFICATION 32 31 19

GATE LEAF

GATE HEIGHT

up to & including 6' Over 6' to 8' Over 8' to 10' Over 12' up to 4' 3" x 12 gauge 3" x 12 gauge 4" x 11 gauge 4" x 11 gauge 4'1" to 6' 3" x 12 gauge 3" x 12 gauge 4" x 11 gauge 4" x 11 gauge 6'1" to 8' 4" x 11 gauge 6" x 3/16 " 6" x 3/16" 6" x 3/16" 8'1" to 10’ 4" x 11 gauge 6" x 3/16 " 6" x 3/16" 6" x 3/16"

10'1" to 12' 6" x 3/16 " 6" x 3/16 " 6" x 3/16" 8" x ¼" 12'1" to 16' 6" x 3/16 " 6" x 3/16 " 8" x ¼" 8" x ¼"

MINIMUM SIZES FOR IMPASSE II POSTS

FENCE POSTS PANEL HEIGHTS

3" x 2.75" x 12ga. I-beam up to and including 8' height 4" x 2.75" x 11 ga. I-beam over 8' & including 10' height

COATING PERFORMANCE REQUIREMENTS

QUALITY CHARACTERISTICS ASTM TEST METHOD PERFORMANCE REQUIREMENTS

ADHESION D3359 – METHOD B Adhesion (retention of coating) over 90% of test area (tape and knife kit test).

CORROSION RESISTANCE B117, D714, D1654 Corrosion resistance over 3,500 hours (scribed per D1654; failure mode is accumulation of 1/8" coating loss from scribe or medium #8 blisters)

IMPACT RESISTANCE D2794 Impact resistance over 60" lb. (forward impact using 0.625" ball).

WEATHERING RESISTANCE D822 D2244, D523 (60o method) Weathering resistance over 1,000 hours (failure mode is 60% loss of gloss or color variance of more than 3 delta-E color units).

TA

B

LE

TA

B

LE

FIGURE 1

TA

B

LE

IMPASSE II POST SPACING BY BRACKET TYPE

SPAN 8' Nominal (95" rail) POST SIZE 3" x 2¾" x 12ga. I-beam 3" x 2¾" x 12ga. I-beam

Line & End Posts

POST SETTINGS

+_ ¼" O.C. 96" 96"

96"96"

INSIDE CORNERINSIDE CORNER

OUTSIDE CORNEROUTSIDE CORNER

96"96"

3.04 GATE INSTALLATION

Gate posts shall be spaced according to the manufacturers’ gate drawings, dependent on standard out-to-out gate leaf dimensions and gate hardware selected. Type and quantity of gate hinges shall be based on the application; weight, height, and number of gate cycles. The manufacturers’ gate drawings shall identify the necessary gate hardware required for the application. Gate hardware shall be provided by the manufacture of the gate and shall be installed per manufacturer’s recommendations.

3.05 CLEANING

The contractor shall clean the jobsite of excess materials; post-hole excavations shall be scattered uniformly away from posts.

3.03 FENCE INSTALLATION MAINTENANCE

When cutting/drilling rails or posts adhere to the following steps to seal the exposed steel surfaces; 1) Remove all metal shavings from cut area. 2) Apply zinc-rich primer to thoroughly cover cut edge and/or drilled hole; let dry. 3) Apply 2 coats of custom finish paint matching fence color. Failure to seal exposed surfaces per steps 1-3 above will negate warranty. Ameristar spray cans or paint pens shall be used to prime and finish exposed surfaces; it is recommended that paint pens be used to prevent overspray. Use of non-Ameristar parts or components will negate the manufactures’ warranty.

Effective: 04/01/20

TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM | 5.13

IMPASSE II

IMPASSE II® | LIMITED WARRANTY

The Impasse II® Steel Security Fence System by Ameristar® is manufactured from the highest quality materials by skilled craftsmen to meet the highest standards of workmanship in the industry. Galvanized steel framework shall be subject to a six stage pretreatment/wash, followed by an electrostatic spray application of the PermaCoat® Color System, a two coat powder system. The base coat is a thermosetting epoxy powder coating (gray in color). The top coat is a “no-mar” TGIC polyester powder coat finish, which provides the protection necessary to withstand adverse environmental conditions.

The powder coated surface on all framework (i.e., pales, rails and posts) by Ameristar is guaranteed under normal and proper usage, against cracking, peeling, chipping, blistering or corroding for a period of fifteen (15) years from the original purchase date. Normal and proper usage does not include physical damage, abrasion or exposure to salty environments to the protective coating.

Impasse II Steel Security Fence System framework is also guaranteed for the same period of time against defects in workmanship or materials.

Should any Impasse II fence framework manufactured by Ameristar Fence Products fail in accordance with any of the above conditions, Ameristar

Fence Products warrants to the original purchaser their redemption through replacement, renewal or issuance of a pro-rated credit. The decision as to which method of redemption is allowed is solely at the discretion of Ameristar. If pro-rated allowance is the chosen alternative, the amount will be based on the total number of years under warranty from date of purchase to date of claim, based on the original cost of framing materials found to be defective. Notice of failure under the conditions of this warranty shall be sent to Ameristar Fence Products or its authorized representative, in writing, together with proof of purchase and shall specify the nature of the defect and when it was first observed. When cutting

Impasse II components immediately seal the exposed surfaces by 1) Removing all metal shavings from cut area 2) Apply zinc-rich primer to thoroughly cover cut edge and drilled hole; let dry 3) Apply 2 coats of custom finish paint matching fence color. Failure to seal exposed surfaces per steps 1-3 above will negate warranty. If contractor uses non Ameristar parts/components this will negate the warranty. Should the fence be improperly installed, Ameristar Fence Products shall not be responsible for guaranteed performance or appearance of the material. Neither does this guarantee apply when failure or damage is due to improper use or application, abuse or misuse, salty environments, vandalism or acts of

God. Ameristar Fence Products reserves the right to inspect the material to determine validity of the claim.

Upon validation of the claim by Ameristar Fence Products or its authorized representative, redemption by replacement, renewal or issuance of a pro-rated credit shall be made by Ameristar Fence Products. Reimbursement for labor necessary to restore and/or replace components that have been found defective under the terms of this warranty is guaranteed to the original purchaser for a period of five (5) years from the original purchase date. Ameristar reserves the right to select the qualified company or individual to perform the labor to repair or replace the components that are deemed to be defective under the terms of this warranty.

The above constitutes the complete warranty by the manufacturer. No other agreement, written or implied, is valid. Ameristar Fence Products does not authorize any other person or agent to make any other express warranties. Ameristar Fence Products neither assumes nor authorizes any other person or agent to assume any other liability in connection with the Impasse II Steel Security Fence System. Some jurisdictions do not allow limitations on how long an implied warranty lasts, nor do they allow an exclusion or limitation of incidental or consequential damages; therefore, the limitations and exclusions noted herein may not apply.

Effective: 04/01/20

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM5.14

IMPASSE II

TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM | 5.15

IMPASSE II

IMPASSE II ® | SINGLE SWING GATE SPECIFICATIONS

2"sq x 12ga GATE ENDS | 2"sq x 12ga RAILS | 2.75" x .75" x 14ga PALES | 3.5' - 16' NOMINAL OPENINGS

X X X

X X X

WLC HC

Ps

OPENING LEAF WIDTH* HC LC Ps HC LC Ps HC LC Ps

3.5' 38.75" 2" 2" 42.75" 1.25" 3" 43" 1.25" 3" 43.25"

4' 44.75" 2" 2" 48.75" 1.25" 3" 49" 1.25" 3" 49.25"

5' 56.75" 2" 2" 60.75" 1.25" 3" 61" 1.25" 3" 61.25"

6' 68.75" 2" 2" 72.75" 1.25" 3" 73" 1.25" 3" 73.25"

7' 80.75" 2" 2" 84.75" 1.25" 3" 85" 1.25" 3" 85.25"

8' 92.75" 2" 2" 96.75" 1.25" 3" 97" 1.25" 3" 97.25"

9' 104.75" 2" 2" 108.75" 1.25" 3" 109" 1.25" 3" 109.25"

10' 116.75" 2" 2" 120.75" 1.25" 3" 121" 1.25" 3" 121.25"

11' 128.75" 2" 2" 132.75" 1.25" 3" 133" 1.25" 3" 133.25"

12' 140.75" 2" 2" 144.75" 1.25" 3" 145" 1.25" 3" 145.25"

13' 152.75" 2" 2" 156.75" 1.25" 3" 157" 1.25" 3" 157.25"

14' 164.75" 2" 2" 168.75" 1.25" 3" 169" 1.25" 3" 169.25"

15' 176.75" 2" 2" 180.75" 1.25" 3" 181" 1.25" 3" 181.25"

16' 188.75" 2" 2" 192.75" 1.25" 3" 193" 1.25" 3" 193.25"

W = width* | HC = hinge clearance | LC = latch clearance | Ps = gate post spacing**

* From outside to outside | ** From inside to inside

COMMERCIAL

HINGE KITS

INDUSTRIAL HINGE KITS

WITH STRONG ARM LATCH

HGBS-25

HGBS-3 / HGBS

IGBS-25

IGBS-3 / IGBS-4

SINGLE SWING

HARDWARE KITS & POST

INTERSPACES

FORK LATCH / BOX

HINGE KITS

IGBSX25 / IGBSX3

SINGLE SWING

DIMENSIONAL DRAWING

X X XX X X

XXX XXX

PsPP Effective: 04/01/20

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM5.16

IMPASSE II

IMPASSE II ® | DOUBLE SWING GATE SPECIFICATIONS

2"sq x 12ga GATE ENDS | 2"sq x 12ga RAILS | 2.75" x .75" x 14ga PALES | 7' - 32' NOMINAL OPENINGS

DOUBLE SWING

DIMENSIONAL DRAWING

X X X

X X X

W W

LC

HC HC

Pd

OPENING LEAF WIDTH* HC LC Pd HC LC Pd

7' 38.75" 2" 2" 83.5" 1.5" 2" 82.5"

8' 44.75" 2" 2" 95.5" 1.5" 2" 94.5"

10' 56.75" 2" 2" 119.5" 1.5" 2" 118.5"

12' 68.75" 2" 2" 143.5" 1.5" 2" 142.5"

14' 80.75" 2" 2" 167.5" 1.5" 2" 166.5"

16' 92.75" 2" 2" 191.5" 1.5" 2" 190.5"

18' 104.75" 2" 2" 215.5" 1.5" 2" 214.5"

20' 116.75" 2" 2" 239.5" 1.5" 2" 238.5"

22' 128.75" 2" 2" 263.5" 1.5" 2" 262.5"

24' 140.75" 2" 2" 287.5" 1.5" 2" 286"

26' 152.75" 2" 2" 311.5" 1.5" 2" 310.5"

28' 164.75" 2" 2" 335.5" 1.5" 2" 334.5"

30' 175" 2" 2" 359.5" 1.5" 2" 358.5"

32' 188.75" 2" 2" 383.5" 1.5" 2" 382.5"

W = width (x2)* | HC = hinge clearance (x2) | LC = latch clearance

Pd = gate post spacing**

* From outside to outside | ** From inside to inside

INDUSTRIAL HINGE KIT

WITH STRONG ARMFORK LATCH / BOX

HINGE KIT

IGBDX

DOUBLE SWING

HARDWARE KITS & POST

INTERSPACES

X X XX X X

XXX XXX

Pd Effective: 04/01/20

TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM | 5.17

IMPASSE II

IMPASSE II ® | 2-RAIL SINGLE SWING GATES

3.25" AIR GAP | STANDARD BOTTOM | GATE HARDWARE SOLD SEPARATELY

7'

HEIGHT

6'

HEIGHT

TRIDENT ™

STRONGHOLD ™

GAUNTLET ™

OPENING LEAF WIDTH ITEM NUMBER WEIGHT STOCKING

3½' 38.75" 3 2070-42 84 lbs

4' 44.75" 3 2070-48 86 lbs

5' 56.75" 3 2070-60 90 lbs

6' 68.75" 3 2070-72 107 lbs

7' 80.75" 3 2070-84 145 lbs

8' 92.75" 3 2070-96 162 lbs

9' 104.75" 3 2070-108 179 lbs

10' 116.75" 3 2070-120 196 lbs

11' 128.75" 3 2070-132 213 lbs

12' 140.75" 3 2070-144 230 lbs

13' 152.75" 3 2070-156 247 lbs

14' 164.75" 3 2070-168 277 lbs

15' 176.75" 3 2070-180 307 lbs

16' 188.75" 3 2070-192 337 lbs

3½' 38.75" 3 2082-42† 93 lbs

4' 44.75" 3 2082-48† 95 lbs

5' 56.75" 3 2082-60† 109 lbs

6' 68.75" 3 2082-72† 123 lbs

7' 80.75" 3 2082-84† 165 lbs

8' 92.75" 3 2082-96† 182 lbs

9' 104.75" 3 2082-108† 199 lbs

10' 116.75" 3 2082-120† 216 lbs

11' 128.75" 3 2082-132† 233 lbs

12' 140.75" 3 2082-144† 250 lbs

13' 152.75" 3 2082-156† 267 lbs

14' 164.75" 3 2082-168† 297 lbs

15' 176.75" 3 2082-180† 327 lbs

16' 188.75" 3 2082-192† 357 lbs

8', 9' & 10' HEIGHTS CONTINUED ON NEXT PAGE

8¾"

Effective: 04/01/20

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM5.18

IMPASSE II

8'

HEIGHT

OPENING LEAF WIDTH ITEM NUMBER WEIGHT STOCKING

3½' 38.75" 3 2094-42† 104 lbs

4' 44.75" 3 2094-48† 123 lbs

5' 56.75" 3 2094-60† 152 lbs

6' 68.75" 3 2094-72† 177 lbs

7' 80.75" 3 2094-84† 206 lbs

8' 92.75" 3 2094-96† 229 lbs

9' 104.75" 3 2094-108† 252 lbs

10' 116.75" 3 2094-120† 275 lbs

11' 128.75" 3 2094-132† 298 lbs

12' 140.75" 3 2094-144† 321 lbs

13' 152.75" 3 2094-156† 344 lbs

14' 164.75" 3 2094-168† 385 lbs

15' 176.75" 3 2094-180† 406 lbs

16' 188.75" 3 2094-192† 452 lbs

= FENCE STYLES AVAILABLE | T = Trident S = Stronghold G = Gauntlet†

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

= NON-STOCKED PRODUCT

For details, see Ameristar's Sales Policy in the catalog guide.

TRIDENT ™

STRONGHOLD ™

GAUNTLET ™

IMPASSE II ® | 2-RAIL SINGLE SWING GATES

3.25" AIR GAP | STANDARD BOTTOM | GATE HARDWARE SOLD SEPARATELY

8¾"

Effective: 04/01/20

TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM | 5.19

IMPASSE II

IMPASSE II ® | 3-RAIL SINGLE SWING GATES

3.25" AIR GAP | STANDARD BOTTOM | GATE HARDWARE SOLD SEPARATELY

7'

HEIGHT

6'

HEIGHT

OPENING LEAF WIDTH ITEM NUMBER WEIGHT STOCKING

3½' 38.75" 3 3070-42 91 lbs

4' 44.75" 3 3070-48 106 lbs

5' 56.75" 3 3070-60 134 lbs

6' 68.75" 3 3070-72 162 lbs

7' 80.75" 3 3070-84 184 lbs

8' 92.75" 3 3070-96 190 lbs

9' 104.75" 3 3070-108 197 lbs

10' 116.75" 3 3070-120 216 lbs

11' 128.75" 3 3070-132 235 lbs

12' 140.75" 3 3070-144 254 lbs

13' 152.75" 3 3070-156 273 lbs

14' 164.75" 3 3070-168 305 lbs

15' 176.75" 3 3070-180 337 lbs

16' 188.75" 3 3070-192 369 lbs

3½' 38.75" 3 3082-42† 100 lbs

4' 44.75" 3 3082-48† 105 lbs

5' 56.75" 3 3082-60† 119 lbs

6' 68.75" 3 3082-72† 135 lbs

7' 80.75" 3 3082-84† 179 lbs

8' 92.75" 3 3082-96† 198 lbs

9' 104.75" 3 3082-108† 217 lbs

10' 116.75" 3 3082-120† 236 lbs

11' 128.75" 3 3082-132† 255 lbs

12' 140.75" 3 3082-144† 274 lbs

13' 152.75" 3 3082-156† 293 lbs

14' 164.75" 3 3082-168† 325 lbs

15' 176.75" 3 3082-180† 357 lbs

16' 188.75" 3 3082-192† 389 lbs

8', 9' & 10' HEIGHTS CONTINUED ON NEXT PAGE

TRIDENT ™

STRONGHOLD ™

GAUNTLET ™

8¾"

Effective: 04/01/20

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM5.20

IMPASSE II

9'

HEIGHT

10'

HEIGHT

OPENING LEAF WIDTH ITEM NUMBER WEIGHT STOCKING

3½' 38.75" 3 3094-42† 115 lbs

4' 44.75" 3 3094-48† 134 lbs

5' 56.75" 3 3094-60† 163 lbs

6' 68.75" 3 3094-72† 188 lbs

7' 80.75" 3 3094-84† 217 lbs

8' 92.75" 3 3094-96† 240 lbs

9' 104.75" 3 3094-108† 263 lbs

10' 116.75" 3 3094-120† 286 lbs

11' 128.75" 3 3094-132† 309 lbs

12' 140.75" 3 3094-144† 332 lbs

13' 152.75" 3 3094-156† 355 lbs

14' 164.75" 3 3094-168† 396 lbs

15' 176.75" 3 3094-180† 417 lbs

16' 188.75" 3 3094-192† 463 lbs

3½' 38.75" 3 3106-42† 122 lbs

4' 44.75" 3 3106-48† 145 lbs

5' 56.75" 3 3106-60† 173 lbs

6' 68.75" 3 3106-72† 195 lbs

7' 80.75" 3 3106-84† 219 lbs

8' 92.75" 3 3106-96† 238 lbs

3-1/2’ 38.75" 3 3118-42† 133 lbs

4’ 44.75" 3 3118-48† 151 lbs

5’ 56.75" 3 3118-60† 195 lbs

6’ 68.75" 3 3118-72† 209 lbs

7’ 80.75" 3 3118-84† 239 lbs

8’ 92.75" 3 3118-96† 258 lbs

= FENCE STYLES AVAILABLE | T = Trident S = Stronghold G = Gauntlet†

= COLOR OPTIONS AVAILABLE | B = Black N = Bronze W = White S = Sand

= NON-STOCKED PRODUCT

For details, see Ameristar's Sales Policy in the catalog guide.

IMPASSE II ® | 3-RAIL SINGLE SWING GATES

3.25" AIR GAP | STANDARD BOTTOM | GATE HARDWARE SOLD SEPARATELY

TRIDENT ™

STRONGHOLD ™

GAUNTLET ™

8¾"

Effective: 04/01/20

TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM | 5.21

IMPASSE II

IMPASSE II ® ANTI-SCALE | 3-RAIL SINGLE SWING GATES

1.375" AIR GAP | STANDARD BOTTOM | GATE HARDWARE SOLD SEPARATELY

7'

HEIGHT

6'

HEIGHT

OPENING LEAF WIDTH ITEM NUMBER WEIGHT STOCKING

3½' 38.50" 3 3070AS-42 91 lbs

4' 46.25" 3 3070AS-48 106 lbs

5' 58.50" 3 3070AS-60 134 lbs

6' 67.50" 3 3070AS-72 162 lbs

7' 79.75" 3 3070AS-84 184 lbs

8' 92.25" 3 3070AS-96 190 lbs

9' 104.75" 3 3070AS-108 197 lbs

10' 116.75" 3 3070AS-120 216 lbs

11' 129.00" 3 3070AS-132 235 lbs

12' 141.25" 3 3070AS-144 254 lbs

13' 153.75" 3 3070AS-156 273 lbs

14' 166.25" 3 3070AS-168 305 lbs

15' 178.50" 3 3070AS-180 337 lbs

16' 191.00" 3 3070AS-192 369 lbs

3½' 38.50" 3 3082AS-42† 100 lbs

4' 46.25" 3 3082AS-48† 105 lbs

5' 58.50" 3 3082AS-60† 119 lbs

6' 67.50" 3 3082AS-72† 135 lbs

7' 79.75" 3 3082AS-84† 179 lbs

8' 92.25" 3 3082AS-96† 198 lbs

9' 104.75" 3 3082AS-108† 217 lbs

10' 116.75" 3 3082AS-120† 236 lbs

11' 129.00" 3 3082AS-132† 255 lbs

12' 141.25" 3 3082AS-144† 274 lbs

13' 153.75" 3 3082AS-156† 293 lbs

14' 166.25" 3 3082AS-168† 325 lbs

15' 178.50" 3 3082AS-180† 357 lbs

16' 191.00" 3 3082AS-192† 389 lbs

8', 9' & 10' HEIGHTS CONTINUED ON NEXT PAGE

TRIDENT ™

STRONGHOLD ™

GAUNTLET ™

8¾"

Effective: 04/01/20

| TO PLACE YOUR ORDER CALL 888-333-3422 | VISIT AMERISTARFENCE.COM5.22

IMPASSE II

9'

HEIGHT

10'

HEIGHT

OPENING LEAF WIDTH ITEM NUMBER WEIGHT STOCKING

3½' 38.50" 3 3094AS-42† 115 lbs

4' 46.25" 3 3094AS-48† 134 lbs

5' 58.50" 3 3094AS-60† 163 lbs

6' 67.50" 3 3094AS-72† 188 lbs

7' 79.75" 3 3094AS-84† 217 lbs

8' 92.25" 3…