5-Specifications Requirements Confirmation Form.pdf

This is a Specifications/Requirements Confirmation Form for RFQ 2026-0015 issued by the Savannah Airport Commission (SAC) in Georgia for the procurement of one (1) pull behind chipper. The equipment must be brand new, unused, and free of defects, with all standard equipment and accessories provided by the original equipment manufacturer included. The chipper must comply with all applicable State and Federal safety and emissions regulations and be of the latest model available. Bidders are required to confirm that each specification and requirement is met by placing a checkmark on this form, or to clearly note any exceptions on a designated Exceptions Sheet. A complete copy of the specifications must be included in the bid response and uploaded to Bonfire.

The minimum specifications for the pull behind chipper include a diesel engine with 49 horsepower and 108 foot-pound maximum torque; a maximum chipping capacity of 12 inches with an infeed opening height of 12 inches and width of 17.5 inches; a 22-inch diameter by 20-inch wide drum with two reversible A8 chipper steel knives and four usable edge shear bar; clutchless belt drive PTO engagement system; LED stop, turn, tail, and license lights; ST235/80/R16 Load Range E tires; 5,200-pound axle/suspension capacity; and electric brakes with breakaway switch. Additional requirements include manufacturer warranty and four keys per unit with FOBs if applicable. Bidders must confirm compliance with all specifications or document exceptions in their bid submission.