5-26-005 Attachment 2 Pump Cut Sheets~1.pdf
PDF 1 MB Posted
- Solicitation number
- 26-422DNR-REALT-B-50816
- Issued by
- Fulton County, Illinois
About this file
This document is a technical specification sheet for Crane Company submersible non-clog sewage pumps, specifically the Series 4SE-L models with 4-inch horizontal discharge capacity, prepared in support of an emergency repair notice issued by the Illinois Department of Natural Resources (IDNR) for multiple lift stations at Wayne Fitzgerrell State Recreation Area in Franklin County. The attachment provides detailed cut sheets and performance curves for pump models ranging from 1.9 horsepower to 15.0 horsepower, all operating at 1150 or 1750 RPM at 60 Hz. The pumps are designed for raw sewage applications and are available in single-phase and three-phase configurations with voltage options including 230V, 200-230V, 460V, and 575V. Each model specification includes full load amperage, locked rotor amperage, cord specifications, and NEMA start codes. The 4SE-L series features cast iron construction (ASTM A-48 Class 20-30), 416 stainless steel shafts, double mechanical oil-filled seals with carbon/ceramic materials, and bearing life ratings of 50,000 hours L10 design.
The specification sheet lists 24 distinct pump model numbers with corresponding part numbers and detailed electrical and operational characteristics, including cord entry lengths of 30 feet for smaller models and 40 feet for larger units. All models are CSA certified (File No. L16567) and include provisions for optional equipment such as alternative seal materials, impeller trims, and epoxy paint finishes. Recommended accessories include break-away fittings, check valves, control panels, seal kits, and service kits. The pumps are rated for extended dry operation without motor or seal damage and are equipped with moisture and temperature sensors (normally open and normally closed respectively) that require relay integration in control panels. Three-phase models are VFD-suitable with overload protection required in external control panels, while single-phase models include integrated overload protection. Performance curves for the 2.8, 3.7, 5.0, 4.5, 7.5, 11.3, and 15.0 horsepower models document flow rates and head performance based on water testing at standard conditions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 5-26-005 Attachment 1 Project Location Drawing~1.pdf | ||
| FW Quote~1.pdf | ||
| Vendor ins invitation-for-bid-vendor-instructions-and-requirements-v26-1 ~1 .docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT 2
Replacement Pump Cut Sheets
SECTION
PAGE
DATE
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598A Crane Co. Company
4" Horizontal Discharge - Submersible Non-Clog Pumps
1D www.cranepumps.com
6/12
Series 4SE-L 3" Spherical Solids Handling
Double Seal
DESCRIPTION:
SUBMERSIBLE NON-CLOG SEWAGE PUMP
DESIGNED FOR TYPICAL RAW SEWAGE
APPLICATIONS
Series: 4SE 1.9 & 2.8HP, 1150RPM, 60Hz
Series: 4SE 2.8, 3.7, 5.0HP, 1750RPM, 60Hz
Sample Specifi cations: Section 1 Page 11.
DISCHARGE .......................4" 125lb., Flange Horizonal
LIQUID TEMPERATURE .....104°F (40°C) Continuous
VOLUTE ...............................Cast Iron ASTM A-48, Class 20
MOTOR HOUSING ..............Cast Iron ASTM A-48, Class 30
SEAL PLATE ......................Cast Iron ASTM, Class 30
IMPELLER: Design .............2 Vane, semi-open with pump out vanes on back side, Dynamically Balanced, ISO G6.3
Material ..........Cast Iron ASTM, Class 30
SHAFT ................................416 Stainless Steel
SQUARE RINGS .................Buna-N
DIAPHRAGM .......................Buna-N
HARDWARE ........................300 Series Stainless Steel
LIFTING BAIL ......................304 Stainless Steel
PAINT ...................................Air Dry Enamel (Epoxy Optional)
SEAL: Design ............Double Mechanical, Oil fi lled pressure equalized reservoir
Material ...........Carbon/Ceramic/Buna-N
Hardware - 300 Series Stainless
CORD ENTRY ......................30 ft. (9.1 m) Cord. Quick connect custom molded for sealing and strain relief
SPEED .................................1150 or 1750 RPM (Nominal)
BEARINGS: Upper ..............Single Row, Ball, Oil Lubricated
Load ....Radial
Lower ..............Single Row, Ball, Oil Lubricated
Load ....Radial
Life ..................50,000 HR L10 Design
MOTOR: Design ............NEMA L- Single Phase, NEMA B - Three Phase
Torque Curve, Oil Filled, Squirrel Cage
Induction
Winding ...........Class B, Class H rated Magnet Wire
Service Factor .1.15
SINGLE PHASE ...................Permanent Split Capacitor (PSC)
Includes Overload Protection in Motor
THREE PHASE ....................200-230/460 is Tri Voltage motor. 575.
Requires Overload Protection to be included in Control Panel, VFD Suitable
MOISTURE SENSOR ..........Normally Open (N/O), Requires relay in control panel
TEMPERATURE SENSOR ..Normally Closed (N/C), Requires relay in control panel. For three phase units ONLY
OPTIONAL EQUIPMENT .....Seal Material, Impeller Trims, Additional Cord, Epoxy Paint
RECOMMENDED:
Accessories .....Break Away Fitting (BAF)
Check Valve
Control Panel
Seal Kit PN
Service Kit PN .130174
CSA 108 - File No. L16567 james.bowling Highlight james.bowling Highlight
DATE
4" Horizontal Discharge - Submersible Non-Clog Pumps
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598A Crane Co. Company
1D www.cranepumps.com
Series 4SE-L 3" Spherical Solids Handling
Double Seal inches
(mm)
3/14
IMPORTANT !
1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
2.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE
WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN
SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE.
MODEL NO PART NO HP VOLT/PH Hz RPM
(Nom)
NEMA
START
CODE
FULL
LOAD
AMPS
LOCKED
ROTOR
AMPS
CORD
SIZE
CORD
TYPE
CORD
O.D inch (mm)
4SE1926L 133159 1.9 230/1 60 1150 D 8.3 35.0 14/3 SOOW/SOW .53 (13.5)
4SE1996L 133160 1.9 200-230/3 60 1150 E/G 5.8/5.0 26.1/30.0 14/4 SOOW/SOW .57 (14.5)
4SE1946L 133161 1.9 460/3 60 1150 G 2.5 15.0 14/4 SOOW/SOW .57 (14.5)
4SE1956L 133162 1.9 575/3 60 1150 G 2.0 12.0 14/4 SOOW/SOW .57 (14.5)
4SE2826L 133163 2.8 230/1 60 1150 A 13.5 31.0 12/3 SOOW/SOW .61 (15.5)
4SE2896L 133164 2.8 200-230/3 60 1150 F/H 9.2/8.4 38.2/44.0 14/4 SOOW/SOW .57 (14.5)
4SE2846L 133165 2.8 460/3 60 1150 H 4.2 22.0 14/4 SOOW/SOW .57 (14.5)
4SE2856L 133166 2.8 575/3 60 1150 H 3.4 17.6 14/4 SOOW/SOW .57 (14.5)
4SE2824L 133125 2.8 230/1 60 1750 A 12.6 23.0 12/3 SOOW/SOW .61 (15.5)
4SE2894L 133141 2.8 200-230/3 60 1750 D/G 9.2/8.0 35.9/42.7 12/4 SOOW/SOW .68 (17.4)
4SE2844L 133142 2.8 460/3 60 1750 F 4.0 18.0 14/4 SOOW/SOW .57 (14.5)
4SE2854L 133144 2.8 575/3 60 1750 F 3.2 14.4 14/4 SOOW/SOW .57 (14.5)
4SE3724L 133145 3.7 230/1 60 1750 A 20.0 29.0 10/3 SOOW/SOW .66 (16.8)
4SE3794L 133146 3.7 200-230/3 60 1750 B/E 16.1/14.0 35.9/42.7 12/4 SOOW/SOW .68 (17.4)
4SE3744L 133147 3.7 460/3 60 1750 E 7.0 21.3 14/4 SOOW/SOW .57 (14.5)
4SE3754L 133148 3.7 575/3 60 1750 G 5.6 21.6 14/4 SOOW/SOW .57 (14.5)
4SE5024L 133149 5.0 230/1 60 1750 A 28.0 59.0 10/3 SOOW/SOW .66 (16.8)
4SE5094L 133150 5.0 200-230/3 60 1750 B/D 20.9/19.0 48.6/56.0 10/4 SOOW/SOW .72 (18.5)
4SE5044L 133151 5.0 460/3 60 1750 D 9.0 28.0 14/4 SOOW/SOW .57 (14.5)
4SE5054L 131152 5.0 575/3 60 1750 E 8.3 23.0 14/4 SOOW/SOW .57 (14.5)
Moisture/Temperature sensor cord for all models is 18/5 SOOW/SOW, 0.47 (11.9mm) O.D.
4" 125 LB
FLANGE 25.52
(648)
5.24
(133)
15.69
(398)
9.38
(238)
12.62
(321)
6.31
(160)
DATE
1D
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598A Crane Co. Company www.cranepumps.com
4" Horizontal Discharge - Submersible Non-Clog Pumps
Series 4SE-L Performance Curve
2.8, 3.7 & 5.0HP, 1750RPM, 60Hz
Testing is performed with water, specifi c gravity 1.0 @ 68º F @ (20ºC), other fl uids may vary performance inches
(mm)
1/05 james.bowling Highlight james.bowling Highlight james.bowling Highlight
DATE
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598A Crane Co. Company
1D www.cranepumps.com
4" Horizontal Discharge - Submersible Non-Clog Pumps
Series 4SE-L 3" Spherical Solids Handling
Double Seal
Series: 4SE-L 4.5 - 15HP, 1750RPM, 60Hz
6/13
CSA 108
LR16567
DESCRIPTION:
SUBMERSIBLE NON-CLOG SEWAGE PUMP
DESIGNED FOR TYPICAL RAW SEWAGE
APPLICATIONS
Sample Specifi cations: Section 1 Page 16.
DISCHARGE .......................4" 125lb., Flange Horizonal
LIQUID TEMPERATURE .....104°F (40°C) Continuous
VOLUTE ...............................Cast Iron ASTM A-48, Class 30
MOTOR HOUSING ..............Cast Iron ASTM A-48, Class 30
SEAL PLATE ......................Cast Iron ASTM A-48, Class 30
IMPELLER:
Design .............2 Vane, Open with pump out vanes on back side, Dynamically Balanced, ISO G6.3
Material ..........Cast Iron ASTM A-48, Class 30
SHAFT ................................416 Stainless Steel
SQUARE RINGS .................Buna-N
DIAPHRAGM .......................Buna-N
HARDWARE ........................300 Series Stainless Steel
LIFTING BAIL ......................304 Stainless Steel
PAINT ...................................Air Dry Enamel (Epoxy Optional)
SEAL: Design ............Double Mechanical, Oil fi lled pressure equalized reservoir
Material ...........Carbon/Ceramic/Buna-N
Hardware - 300 Series Stainless
CORD ENTRY ......................40 ft. (12.1 m) Cord. Epoxy Sealed Housing with secondary pressure grommet for sealing and strain relief
SPEED .................................1750 RPM (Nominal)
BEARINGS:
Upper ..............Single Row, Ball, Oil Lubricated
Load ....Radial
Lower ..............Single Row, Ball, Oil Lubricated
Load ....Radial
Life ..................50,000 HR L10 Design
MOTOR: Design ............NEMA L- Single Phase, NEMA B - Three Phase
Torque Curve, Oil Filled, Squirrel Cage
Induction
Winding ........Class F, Class H rated Magnet Wire
Service Factor............1.15
SINGLE PHASE ...................Capacitor Start/Capacitor Run. Requires
Barnes Starter/Panel which includes capacitors and overload protection
THREE PHASE ....................Dual Voltage motor 230/460/575.
Requires Overload Protection to be included in Control Panel, VFD Suitable
MOISTURE SENSOR ..........Normally Open (N/O), Requires relay in control panel
TEMPERATURE SENSOR ..Normally Closed (N/C), Requires relay in control panel.
OPTIONAL EQUIPMENT .....Seal Material, Impeller Trims, Additional Cord, Epoxy Paint
RECOMMENDED:
Accessories .....Break Away Fitting (BAF)
Check Valve
Control Panel
Seal Kit PN
Service Kit PN .130175 james.bowling Highlight james.bowling Highlight
DATE
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598A Crane Co. Company
1D www.cranepumps.com
4" Horizontal Discharge - Submersible Non-Clog Pumps
Series 4SE-L 3" Spherical Solids Handling
Double Seal
IMPORTANT !
1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
2.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE
WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN
SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE.
MODEL NO PART NO HP VOLT/PH Hz RPM
(Nom)
NEMA
START
CODE
FULL
LOAD
AMPS
LOCKED
ROTOR
AMPS
CORD
SIZE
CORD
TYPE
CORD
O.D inch (mm)
4SE4524L 084623 4.5 230/1 60 1750 A 26.0 59.0 10/4 SOW 0.750 (19.1)
4SE4564L 084624 4.5 200/3 60 1750 C 20.9 48.6 10/4 SOW 0.750 (19.1)
4SE4534L 084625 4.5 230/3 60 1750 E 18.2 56.0 10/4 SOW 0.750 (19.1)
4SE4544L 084626 4.5 460/3 60 1750 E 9.1 28.0 10/4 SOW 0.750 (19.1)
4SE4554L 089306 4.5 575/3 60 1750 E 7.2 22.4 10/4 SOW 0.750 (19.1)
4SE7524L 084627 7.5 230/1 60 1750 A 39.0 96.0 6/4 SOW 1.06 (27)
4SE7564L 084628 7.5 200/3 60 1750 B 30.8 69.5 8/4 SOW 0.830 (21)
4SE7534L 084629 7.5 230/3 60 1750 D 26.8 80.0 8/4 SOW 0.830 (21)
4SE7544L 084630 7.5 460/3 60 1750 D 13.4 40.0 8/4 SOW 0.830 (21)
4SE7554L 089307 7.5 575/3 60 1750 D 10.7 32.0 10/4 SOW 0.750 (19.1)
4SE11364L 084631 11.3 200/3 60 1750 B 32.2 109.5 8/4 SOW 0.830 (21)
4SE11334L 084632 11.3 230/3 60 1750 D 28.0 126.0 8/4 SOW 0.830 (21)
4SE11344L 084633 11.3 460/3 60 1750 D 14.0 63.0 8/4 SOW 0.830 (21)
4SE11354L 089308 11.3 575/3 60 1750 D 11.2 50.4 10/4 SOW 0.750 (19.1)
4SE15034L 084634 15.0 230/3 60 1750 D 38.0 160.0 6/4 SOW 1.06 (27)
4SE15044L 084635 15.0 460/3 60 1750 D 19.0 80.0 6/4 SOW 1.06 (27)
4SE15054L 089309 15.0 575/3 60 1750 D 15.2 64.0 8/4 SOW 0.830 (21)
Moisture/Temperature sensor cord for all phase models is 18/5 SOW, 0.476 (12.1mm) O.D.
inches
(mm)
3/14
DATE
1D
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598A Crane Co. Company www.cranepumps.com
4" Horizontal Discharge - Submersible Non-Clog Pumps
Series 4SE -L Performance Curve
4.5, 7.5, 11.3 & 15HP, 1750RPM, 60Hz inches
(mm)
Testing is performed with water, specifi c gravity 1.0 @ 68º F @ (20ºC), other fl uids may vary performance
1/05
| Attachment Cover.pdf |
| Location Drawing.pdf |
| Sheets and Views |
| Details |
| Attachment Cover |
| 5 HP Pump Spec Sheet.pdf |
| 15 HP Pump Spec Sheet.pdf |
| manual: |
| Button1: |
File details come from the government source that posted it. Updated .