(5) 0600000 C Floating Crane.pdf

0600000-Port Operations Table of Contents

Spec Item Title 1 General Information

1.1 Concept of Operations

2 Management and Administration

2.1 Definitions and Acronyms

2.2 Personnel

2.2.1 Dockmaster

2.2.2 Harbor Pilot

2.2.3 Port Control Tower Watch

2.2.4 Tug Master

2.2.5 Port Operations Manager

2.3 Special Requirements

2.3.1 Certification and Training

2.3.1.1 Crane Operator Licensing

2.3.1.2 Support Craft Licensing

2.3.1.3 Coxswain Certification

2.3.2 Severe Weather Action Duties

2.3.3 Security Clearance Requirements

2.3.4 Additional Special Requirements

2.4 References and Technical Documents

3 Recurring Work (N/A) 4 Non-Recurring Work

0600000 – Port Operations Spec Item

Title Description

1 General Information

The Contractor shall provide all labor, management, supervision, tools, material, and equipment required to perform services in support of Floating Crane Operations at Naval Submarine Base New London.

1.1 Concept of

Operations

The Port Operations includes services such as berthing and hotel services, support craft for ship movements, port logistics, port operations center, support craft for berth days, magnetic silencing, spill response and maintenance.

2 Management and Administration

2.1 Definitions and

Acronyms

Definitions and Acronyms are listed in J-0600000-01.

2.2 Personnel The Contractor shall provide personnel with the qualifications, technical knowledge, experience and skills required for efficient operation, maintenance and repair in support of port operation services.

2.2.1 Certification, Training, and Licensing

All personnel operating cranes and other WHE shall be trained and licensed per NAVFAC P-307, Management of Weight Handling Equipment Maintenance and Certification.

The Contractor shall possess and maintain current licensing as a Master 500-Ton (Inland, Near Coastal, or Ocean) with endorsements for towing and radar observer.

The Contractor shall possess and maintain a current STCW (95) certificate to cover assignment of duties upon coastal U.S. and Canadian waters.

Spill response personnel shall be trained and certified per OPNAVINST 5090.1, 29 CFR 1910.120, and the Facilities Response Plan (FRP) and shall be certified in compliance with Federal, state and local statutes and regulations, and with DoD policies, instructions and guidance.

Personnel assigned coxswain duties may be required to navigate and operate small tugboats, maintenance service craft, and security craft. Coxswain shall be certified by the Coast Guard for small craft operations, experienced in boat operations and handling, and shall comply with all Federal, state and local laws, rules and regulations.

The Contractor shall submit proof of all certification, training, and licensing requirements per Section F.

2.2.2 Key Personnel

2.2.2.1 Dockmaster The Contractor shall provide a dockmaster to manage and coordinate all docking and undocking work, all berthing support, and all waterborne support vessel activities, per HBROPSDEPTINST 1510.2H.

2.2.2.2 Harbor Pilot The Contractor shall provide qualified, licensed Harbor Pilot(s) as necessary to perform the requirements of this specification. The Contractor’s Harbor Pilots shall possess a First Class Unlimited Pilot License for the port obtained through the Coast Guard per 46 CFR Part 10.07 and NEC 0215 qualifications. The Contractor’s Pilots shall obtain a State Pilot License for the state of Connecticut.

2.2.2.3 Port Control Tower

Watch

The Contractor shall provide qualified Port Control Tower Watch personnel.

Personnel must be fluent in English, including verbal and written communications.

Must have working knowledge of Navigational Skills such as Chart Reading, Plotting, Figuring Time and Distance and familiarization with Navigational Tools.

Must have knowledge of Port Control Schedules. Perform the services and conduct all operations with applicable practices and referenced publications incorporated herein. The Port Control Tower is one of the primary locations for liaison between in port ships and island commands, as well as for the coordination of emergency

0600000 – Port Operations Spec Item

Title Description response. This position demands a high degree of responsibility. Oral review board/practical exam to be given by Harbor Pilot and concurrence by Port Operations Officer. Final qualification signature of approval to be by KO.

2.2.2.4 Tug Master The Contractor shall provide a qualified Tug Master. The Tug Master must be fluent in English, including verbal and written communications. Tug Master must also be certified by appropriate regulatory body for the vessel flag (e.g. USCG for US flag tug) for the waterway around Naval Submarine Base New London and possess the proper endorsements for the handling of large merchant and Naval vessels. Submit qualifications to Contracting Officer Representative (COR) for approval prior to hiring.

2.2.2.5 Port Operations

Manager

The Contractor shall provide a Port Operations Manager. The Port Operations Manager shall possess a Special Background Investigation (SBI) secret clearance.

The Port Operations Manager shall also possess Port Operations experience i.e.

with a minimum of 72 months Harbor Operations experience. Submit qualifications to Contracting Officer Representative (COR) for approval prior to hiring.

2.3 Special

Requirements

2.3.1 Severe Weather

Action Duties

The Contractor shall make their entire workforce, materials, and equipment available for protection of life and property in the event of severe weather, such as, but not limited to, hurricane, tornado, strong winds, flood, or fire.

2.3.2 Security Clearance

Requirements

The Contractor shall furnish the information required on the Security Classification Specification, Form DD254, to process this clearance. The Contractor shall complete and provide all necessary personnel security forms to Security Management prior to being employed and provide other information as required by the Defense Security Service Operations Center-Columbus (DSS OCC) and Office of Personnel Management Investigations, for the purpose of initiating personnel clearance requests.

2.3.3 Safety

Requirements

The Contractor shall comply with OPNAVINST 5100.19 Series, Navy Occupation Safety and Health (NAVOSH) Program for Forces Afloat.

Contractor personnel must wear the right Personal Protective Equipment (PPE) during performance of work including life jackets, or vest is worn while working on barges, catwalk of floating vessels, paint floats or pontoon/causeways, hardhats with work center ID & color coded and acceptable working uniform on designated areas. Steel toe shoes shall be worn at all times within the industrial area of the Port Operations.

2.4 References and

Technical Documents

References and Technical Documents are listed in J-0600000-02.

Item

Title Performance Objective

Related Information Performance Standard

3 Recurring Work

None None None

Item

Title Performance Objective Related Information Performance Standard

4 Non-Recurring Work

Non-recurring work may be ordered utilizing DoD EMALL in accordance with Section H or on a task order in accordance with the PROCEDURES

FOR ISSUING

ORDERS clause in Section G. The order will specify the exact locations and types of work to be accomplished. The period of performance will be specified in each order.

Refer to non-recurring ELINs for task listings, descriptions, and related requirements. All periods of performance are measured from issue date of order to acceptance of the work.

Performance standards for non-recurring work will be the same as those in Spec Item 3 where applicable.