Backhoe (Compliance Matrix).xls
XLS spreadsheet 36 KB Posted
- Attached to
- RFQ for Backhoe Loaders
- Solicitation number
- 47QSWA-21-B-0308
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 47QSWA-21-B-0308a (RFQ for Backhoes).doc | DOC document | |
| Backhoes JOTFOC2 (Signed).pdf | ||
| 47QSWA-21-B-0308 (RFQ for Backhoes).doc | DOC document | |
| Backhoe (Compliance Matrix).xls | XLS spreadsheet | |
| Backhoes JOTFOC (signed).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Compliance Matrix
| Front End Loader (FEL) - Customer's Requirement | Front End Loader (FEL) - Vendor's Quote |
| -FEL bucket. A 4-in-1 bucket with four capability configurations: dozer, scraper, loader |
(standard bucket), and clamshell.
| -Full length cutting edge on bucket. | |
| -FEL minimum dump clearance (reach) @ full height, 45-degree dump | |
| -no less than Bucket 8 ft, 10 in | |
| -no less than Bucket clamshell open 9 ft, 6 in | |
| -FEL bucket capacity minimum of 1.25 cubic yards | |
| --Hydraulic quick attach for FEL | |
| Backhoe - Customer's Requirement | Backhoe - Vendor's Quote |
| -Digging radius from swing pivot no less than 17 ft, 6 in. | |
| -Loading height no less than 11 ft, | |
| -Loading height (dipper cylinder retracted) no less than 10 ft, | |
| -Loading reach no less than 5 ft. 6 in. | |
| -Loading reach (dipper cylinder retracted) no less than 8 ft, 6 in. | |
| -Loading reach (dipper cylinder retracted) no less than 4 ft 6 in. | |
| -Maximum dig depth no less than to 13 ft, 10 in. | |
| -Backhoe bucket capacity no less than 0.28 cubic yards with a width of no less than 24 in. | |
| -Boom lift capacity at full extension no less than 2700 lbs. | |
| -Boom digging force no less than 12900 lbs at full extension. | |
| -Gripper teeth extensions | |
| -Hydraulic quick attach for backhoe dipper | |
| Engine - Customer's Requirement | Engine - Vendor's Quote |
| -Minimum of 90hp engine. | |
| -Diesel engine. | |
| -Minimum of 30 gallons diesel fuel tank. | |
| -If the engine requires Diesel Exhaust Fluid (DEF), the cap must be a locking cap or cover. | |
| -Engine will have a self-protection feature to automatically shut down if the there is a critical system fault. | |
| Transmission - Customer's Requirement | Transmission - Vendor's Quote |
| -4 wheel drive | |
| -Clutch actuated with a minimum of 4 forward and 2 reverse gears | |
| -Capable of a 20 mph road speed | |
| Electrical - Customer's Requirement | Electrical - Vendor's Quote |
| -Two hazard/turn lights.A39 | |
| -Minimum of two with a minimum of 55 Watt halogen or equivalent driving lights. | |
| -Minimum of two with a minimum of 55 Watt halogen or equivalent work lights. | |
| -Minimum of four adjustable work lights with a minimum of 55 Watt halogen or equivalent bulbs and two hazard/turn lights. | |
| -Rotating or LED caution beacon light. | |
| -24 volt (minimum) Starting system consisting of at least two 12 volt batteries. (preferred but not required) | |
| -Battery disconnect | |
| Other Controls and Characteristics - Customer's Requirement | Other Controls and Characteristics - Vendor's Quote |
| -Manual FEL and backhoe controls | |
| -Auxiliary hydraulic connections on FEL and backhoe dipper for attaching additional |
equipment such as auger, sweep, mower, etc.
| -Heavy counterweights for front |
| -Stabilizer arms with flip over combination turf and street pads |
| -Enclosed, heated cab with windshield wipers that provide protection from rollover, |
falling objects, debris, and rain.
| -Spare front wheel assembly (rim and tire) of same size and design as mounted wheel. | |
| -Spare rear wheel assembly (rim and tire) of same size and design as mounted wheel. | |
| -Mounted tool box | |
| Manufacturer - Customer's Requirement | Manufacturer - Vendor's Quote |
| -CASE, John Deere, or Kubota |
File details come from the government source that posted it. Updated .