SF30_A0001_47QACA26Q0392_EnginLathe_2026-08-26.pdf

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or

(c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

A0001

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of this Amendment is to: 1. Incorporate the Government's responses to Requests for Information (RFIs) received; 2. Revise Section 2, Schedule of Supplies; 3. Clarify the CLIN structure and FOB Destination pricing requirements;

4. Replace Attachment 3, Pricing Spreadsheet, with Attachment 3_Rev1; 5. Clarify the applicable “Ship To” locations in Attachment 4; and 6. Extend the quotation submission deadline.

See Continuation Page

GSA / FAS / OCAS

Office of Centralized Acquisition Services 1900 E Street, NW Washington, District of Columbia 20405-0001

47QACA26Q0392

8/26/2026

1 3

08/12/2026

8/26/2026

Melissa Martel

INSTRUCTIONS (Back Page):

Instructions for items other than those that are self-explanatory, are as follows:

Item 1 (Contract ID Code). Insert the contract type identification code that appears in the title block of the contract being modified.

Item 3 (Effective date).

(1)

(2)

(3)

(4)

(5)

For a solicitation amendment, change order, or administrative change, the effective date shall be the issue date of the amendment, change order, or administrative change.

For a supplemental agreement, the effective date shall be the date agreed to by the contracting parties.

For a modification issued as an initial or confirming notice of termination for the convenience of the Government, the effective date and the modification number of the confirming notice shall be the same as the effective date and modification number of the initial notice.

For a modification converting a termination for default to a termination for the convenience of the Government, the effective date shall be the same as the effective date of the termination for default.

For a modification confirming the contracting officer's determination of the amount due in settlement of a contract termination, the effective date shall be the same as the effective date of the initial decision.

(a)

(b)

(c)

(d)

(e)

(f)

Item 6 (Issued By). Insert the name and address of the issuing office. If applicable, insert the appropriate issuing office code in the code block.

Item 8 (Name and Address of Contractor). For modifications to a contract or order, enter the contractor's name, address, and code as shown in the original contract or order, unless changed by this or a previous modification.

Items 9, (Amendment of Solicitation Number - Dated), and 10, (Modification of Contract/Order Number - Dated). Check the appropriate box and in the corresponding blanks insert the number and date of the original solicitation, contract, or order.

Item 12 (Accounting and Appropriation Data).

When appropriate, indicate the impact of the modification on each affected accounting classification by inserting one of the following entries:

(2) Accounting classification Net decrease $

Include subject matter or short title of solicitation/contract where feasible.

Item 16B. The contracting officer's signature is not required on solicitation amendments. The contracting officer's signature is normally affixed last on supplemental agreements.

(i)

NOTE: If there are changes to multiple accounting classifications that cannot be placed in block 12, insert an asterisk and the words "See continuation sheet".

Item 13. Check the appropriate box to indicate the type of modification. Insert in the corresponding blank the authority under which the modification is issued. Check whether or not contractor must sign this document. (See FAR 43.103.)

Item 14 (Description of Amendment/Modification).

Organize amendments or modifications under the appropriate Uniform Contract Format (UCF) section headings from the applicable solicitation or contract. The UCF table of contents, however, shall not be set forth in this document.

Indicate the impact of the modification on the overall total contract price by inserting one of the following entries:

(i) Total contract price increased by $

(ii) Total contract price decreased by $

(iii) Total contract price unchanged.

State reason for modification.

When removing, reinstating, or adding funds, identify the contract items and accounting classifications.

(g)

(h)

When the SF 30 is used to reflect a determination by the contracting officer of the amount due in settlement of a contract terminated for the convenience of the Government, the entry in Item 14 of the modification may be limited to --

(i) A reference to the letter determination; and

(ii) A statement of the net amount determined to be due in settlement of the contract.

(1)

(2)

(3)

(4)

(5)

(6)

STANDARD FORM 30 (REV. 11/2016) BACK

(1) Accounting classification Net increase $

47QACA26Q0392 Amendment 0001 Continuation Page

1. Incorporation of Government Responses to RFIs: The Government’s responses to RFIs received are hereby incorporated into the solicitation as:

Attachment 6 - Government Responses to RFIs

Quoters shall consider the Government’s responses when preparing and submitting quotations.

In the event of a conflict between the Government’s RFI responses and the RFQ, this Amendment 0001, the revised Schedule of Supplies, and the revised attachments shall control.

2. Schedule of Supplies: Section 2, Schedule of Supplies, is deleted in its entirety and replaced with the following:

The Government requires three engine lathes. The Schedule of Supplies is revised as follows:

Shipping and handling terms are FOB Destination.

Each unit price shall be quoted as a FOB Destination price, inclusive of all applicable shipping, freight, handling, and delivery costs to the applicable “Ship To” location identified in Attachment 4.

No separate shipping/freight CLIN will be used.

Any prior reference to CLIN 0002, Shipping/Freight, Quantity 1 EA, is hereby deleted and superseded by this revised Schedule of Supplies and Attachment 3_Rev1.

Inspection and acceptance will occur at destination.

The North American Industry Classification System code and Product Service Code applicable to this requirement remain unchanged:

● NAICS: 333517 — Machine Tool Manufacturing

● PSC: 3416 — Lathes

3. Attachment 3- Pricing Spreadsheet: Attachment 3, Pricing Spreadsheet, is deleted in its entirety and replaced with Attachment 3_Rev1- Pricing Spreadsheet.

Vendors shall use Attachment 3_Rev1 when preparing and submitting quotations.

Failure to use the revised pricing spreadsheet may result in the quotation being considered inconsistent with the solicitation requirements.

CLIN Description Quantity Unit of measure Type

0001 Engine lathe - Cannon AFB, NM 2 EA Product

0002 Engine lathe - Travis AFB, CA 1 EA Product

4. Shipping / FOB Destination / Ship To Clarification: The Government clarifies that shipping and handling terms are FOB Destination.

Quoters shall price delivery to the applicable “Ship To” location identified in Attachment 4.

Any “Ultimate Ship To” location identified in Attachment 4 is provided for Government logistics purposes only and is not the quoter’s required delivery destination unless expressly stated otherwise in the RFQ or Attachment 4.

The Government will not accept collect shipments.

5. Attachment 4 — Shipping Locations

Attachment 4, Engine Lathe Shipping Locations, remains in effect except as clarified by this Amendment.

For purposes of quotation pricing and delivery, quoters shall use the following delivery structure:

The vendor’s required delivery destination is the “Ship To” location, not the “Ultimate Ship To” location, unless expressly stated otherwise.

The quotation submission deadline is hereby extended. Quotes are now due no later than September 4, 2026, at 2:00 PM Eastern Time.

Quotations shall be submitted in accordance with the instructions in the RFQ.

Document Issued with Amendment 0001

DOCUMENT:

Attachment 3_Rev1 — Pricing Spreadsheet

Attachment 6 — Government Responses to RFIs

Attachments not expressly revised, replaced, or added by this amendment remain unchanged and continue to apply.

6. Other Terms and Conditions: Except as amended herein, all other terms and conditions remain unchanged.

End of Amendment 0001

CLIN Quantity Required Vendor Ship To Location Ultimate Ship To

0001 2 Engine lathe - Cannon AFB, NM

N/A or as stated in Attachment 4

0002 1 Engine lathe - Travis AFB, CA

Osan AB, Korea, for Government logistics purposes only

CLIN

Original

Equipment Manufacturer

OEM Part Number Item Description Delivery Terms

Unit of Issue

QTY

Required

Country of Origin

Proposed Delivery Days

ARO

Extended Price

0001 Engine lathe - Cannon AFB, NM FOB Destination

EA 2

$0.00

0002 Engine lathe - Travis AFB, CA FOB Destination

EA 1

$0.00

$0.00Aggregate Evaluated Price:

Unit prices shall be quoted as FOB Destination prices and shall include all applicable shipping, freight, handling, and delivery costs to the applicable "Ship To" location identified in Attachment 4. No separate shipping/freight CLIN will be used. Vendors shall provide pricing for all CLINs to be eligible for award.

Proposed delivery shall not exceed 365 days ARO.

47QACA26Q0392_Attachment3_Rev1_EngineLathe

Quoted Destination Price

Unit Price

Attachment 6 Project Title: Engine Lathes Solicitation #: 47QACA26Q0392

# RFI Government's Response

Geared Head / Threading Configuration The Technical Matrix specifies a “geared head,” while the salient characteristics separately state that a toolroom (precision) lathe may utilize either a threading gearbox or digital thread control.

Could you please clarify whether “geared head” specifically requires a mechanically geared spindle head, independent of the threading system, or whether a machine with an otherwise compliant spindle drive and digital/servo threading control would satisfy this requirement?

The CID states belt driven or gear driven and then separately defines the threading control. (Reached out to MFTO office for further clarification, but I believe this is our best response.)

Reference Manufacturer / Model The specifications appear to describe a Type 2 toolroom (precision) lathe with an 11-inch swing and 17–18-inch center-to-center capacity.

Is there a manufacturer/model or reference machine that was used as the basis for the specifications? If available, could you please provide the model information or a reference photo? This would be used for clarification only and not as a request to restrict competition to a particular manufacturer.

The CID is associated with PN CT618DT from Clausing. The original part number for this NSN is HLVH from Hardinge Bros.

Multiple-Tool Turret / Quick-Change Tool Post Section 3.2.9 requires a multiple-tool holding turret with a minimum of four positions, while Section 3.2.19.3 separately requires a removable quick-change tool post and associated toolholders.

Could you please confirm whether these are intended to be two separate required components, or whether an Aloris-style quick-change tool post with the required interchangeable toolholders may satisfy the multiple-tool turret requirement as well?

As long as it meets both requirements it would be acceptable (Reached out to MFTO office for further clarification, but I believe this is our best response.)

Country of Origin / Buy American We are considering equipment that is manufactured in Taiwan and subsequently brought to the supplier's facility in Pennsylvania for inspection, fitting, alignment, testing, installation/testing of selected accessories, and final machine preparation.

The RFQ incorporates FAR 52.225-1, Buy American—Supplies, while the salient characteristics also state that the equipment “should be manufactured in the United States of America.”

Could you please clarify whether equipment manufactured in Taiwan but subsequently processed and prepared in the United States as described above would be acceptable under this requirement, and how it should be represented for Buy American compliance purposes?

Your clarification will help us ensure that the equipment and supporting technical package we submit accurately address the requirement.

The Government will evaluate country of origin and Buy American compliance in accordance with the applicable solicitation provisions and clauses, including FAR/RFO 52.225-1, Buy American— Supplies, FAR/RFO 52.225-2, Buy American Certificate, and any other applicable representation or certification requirements.

Vendors are responsible for accurately representing the country of origin and Buy American status of the offered end product in accordance with the solicitation.

If the equipment is manufactured in Taiwan and the activities performed in the United States consist of inspection, fitting, alignment, testing, installation/testing of selected accessories, and final machine preparation, the vendor should not represent the end product as a domestic end product unless the vendor can support that the U.S. operations constitute manufacturing of the end product and that the product otherwise satisfies the applicable domestic content requirements.

If the offered end product is a foreign end product, the vendor shall identify it in the Buy American Certificate, including the applicable line item number, country of origin, and whether it exceeds the domestic content threshold stated in FAR/RFO 52.225-2. Foreign end products will be evaluated in accordance with the applicable Buy American provisions, clauses, and evaluation requirements of the solicitation.

The statement in the salient characteristics that the equipment “should be manufactured in the United States of America” is clarified to mean that vendors must comply with the Buy American requirements included in the solicitation. This statement is not a separate technical acceptability requirement independent of FAR/RFO 52.225-1 and FAR/RFO 52.225-2.

This solicitation is a Total Small Business Set-Aside and includes FAR/RFO 52.219-33, Nonmanufacturer Rule. Vendors are also responsible for ensuring compliance with all applicable small business and nonmanufacturer rule requirements.

The Government will not make a final country-of-origin, Buy American, or nonmanufacturer rule compliance determination based solely on the general description provided in the question.

Compliance will be evaluated based on the vendor’s quotation, representations, certifications, and supporting information submitted in response to the solicitation.