Amendment_0003_-_Solicitation_47PD0219R0042.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

3PQ

Stephen Kohri, Contracting Officer

Please see attached

3PQ

GSA ACQUISITION MANAGEMENT DIVISION

100 S. INDEPENDENCE MALL WEST

PHILADELPHIA, PA 19106-2320 USA

GSA ACQUISITION MANAGEMENT DIVISION

100 S. INDEPENDENCE MALL WEST

PHILADELPHIA, PA 19106-2320 USA

EQ3PCSB-19-0021

47PD0219R0042

1 4

10/10/2019

9/17/2019

10/10/2019

INSTRUCTIONS (Back Page):

Instructions for items other than those that are self-explanatory, are as follows:

Item 1 (Contract ID Code). Insert the contract type identification code that appears in the title block of the contract being modified.

Item 3 (Effective date).

(1)

(2)

(3)

(4)

(5)

For a solicitation amendment, change order, or administrative change, the effective date shall be the issue date of the amendment, change order, or administrative change.

For a supplemental agreement, the effective date shall be the date agreed to by the contracting parties.

For a modification issued as an initial or confirming notice of termination for the convenience of the Government, the effective date and the modification number of the confirming notice shall be the same as the effective date and modification number of the initial notice.

For a modification converting a termination for default to a termination for the convenience of the Government, the effective date shall be the same as the effective date of the termination for default.

For a modification confirming the contracting officer's determination of the amount due in settlement of a contract termination, the effective date shall be the same as the effective date of the initial decision.

(a)

(b)

(c)

(d)

(e)

(f)

Item 6 (Issued By). Insert the name and address of the issuing office. If applicable, insert the appropriate issuing office code in the code block.

Item 8 (Name and Address of Contractor). For modifications to a contract or order, enter the contractor's name, address, and code as shown in the original contract or order, unless changed by this or a previous modification.

Items 9, (Amendment of Solicitation Number - Dated), and 10, (Modification of Contract/Order Number - Dated). Check the appropriate box and in the corresponding blanks insert the number and date of the original solicitation, contract, or order.

Item 12 (Accounting and Appropriation Data).

When appropriate, indicate the impact of the modification on each affected accounting classification by inserting one of the following entries:

(2) Accounting classification Net decrease $

Include subject matter or short title of solicitation/contract where feasible.

Item 16B. The contracting officer's signature is not required on solicitation amendments. The contracting officer's signature is normally affixed last on supplemental agreements.

(i)

NOTE: If there are changes to multiple accounting classifications that cannot be placed in block 12, insert an asterisk and the words "See continuation sheet".

Item 13. Check the appropriate box to indicate the type of modification. Insert in the corresponding blank the authority under which the modification is issued. Check whether or not contractor must sign this document. (See FAR 43.103.)

Item 14 (Description of Amendment/Modification).

Organize amendments or modifications under the appropriate Uniform Contract Format (UCF) section headings from the applicable solicitation or contract. The UCF table of contents, however, shall not be set forth in this document.

Indicate the impact of the modification on the overall total contract price by inserting one of the following entries:

(i) Total contract price increased by $

(ii) Total contract price decreased by $

(iii) Total contract price unchanged.

State reason for modification.

When removing, reinstating, or adding funds, identify the contract items and accounting classifications.

(g)

(h)

When the SF 30 is used to reflect a determination by the contracting officer of the amount due in settlement of a contract terminated for the convenience of the Government, the entry in Item 14 of the modification may be limited to --

(i) A reference to the letter determination; and

(ii) A statement of the net amount determined to be due in settlement of the contract.

(1)

(2)

(3)

(4)

(5)

(6)

STANDARD FORM 30 (REV. 11/2016) BACK

(1) Accounting classification Net increase $

A/E Design Services Custom House Mechanical and Plumbing Renovation Design, Philadelphia, Pennsylvania Amendment 0003 to RFQ Solicitation No: 47PD0219R0042

AMENDMENT 0003

Solicitation Number: 47PD0219R0042

A/E Design Services

Custom House Mechanical and Plumbing Renovation Design

Philadelphia, PA

Issue Date: October 10, 2019

A/E Design Services Custom House Mechanical and Plumbing Renovation Design, Philadelphia, Pennsylvania Amendment 0003 to RFQ Solicitation No: 47PD0219R0042

Project Title: A/E Design Services Custom House Mechanical and Plumbing Renovation Design Philadelphia, PA

RE: Amendment 0003 - 47PD0219R0042

1. This represents Amendment 0003 issued against the above referenced Request for Qualifications (RFQ). This Amendment must be acknowledged with your submission.

2. The due date for the qualifications submission remains October 21, 2019, 4:00 PM (EST).

3. The following questions were submitted in reference to the above RFQ. Please see the questions and the answers to those questions below:

A/E Design Services - Philadelphia Custom House Project, Phialdelphia, PA

RFP #: 47PD0219R0042

RFI # Question Answer

Reference Criteria 2 - Philosophy and Design Intent: Can a team of 2 Lead Designers each submit a 2-page Philosophy and Design Intent for each Lead Designer – for a total maximum of 4 pages?

The maximum number of pages for Criteria 2 - PHILOSOPHY AND DESIGN INTENT is two (2) pages regardless of the number of Lead Designers proposed.

Reference Criteria 4 - Lead Designer Profile: Can a team of 2 Lead Designers each submit a 3-page biographical sketch for each Lead Designer – for a total maximum of 6 pages?

Yes, a team of two (2) Lead Designers can each submit a maximum 3-page biographical sketch for each Lead Designer

If the file is too large to email (>25MB), may we submit electronically via a secured external link for GSA to download?

Yes, this is acceptable. The submission can also be submitted as a Google document.

If the Lead Designer in a Stage I submission does not work for a firm that has the Architectural Services NAICS code (541310), must the Past Performance on Design portfolio (evaluation criteria 1) in the Stage I submission be from an A/E firm that does have that code?

Only the prime contractor (who would receive the award) is required to have the 541310 NAICS code.

Is there a maximum overall page limit for the Lead Designer Portfolio if the lead designer is a team? We understand that relevant projects are limited to 2 projects per designer, not to exceed 5 pages per project.

There is no overall page limit, only the limit of two (2) projects at a maximum of five (5) pages per project from each lead designer/engineer or lead design discipline.

Can GSA revise RFI response 005 to either make the applicable NAICS Code 541330 Engineering Services, or make the applicable NAICS Codes 541330 Engineering Services and NAICS Code 541310 Architectural Services?

GSA projects can only have one applicable NAICS code assigned to it. While this project has both Architectural and Engineering services required, the Government has determined that the appropriate NAICS code for this project is 541310 - Architectural Services. Only the prime contractor (who would receive the award) is required to have the 541310 NAICS code.