Madawaska Virtual Site Walk README_FINAL (1).pdf

Madawaska LPOE Existing Site Conditions Viewing Instructions

Aerial + Ground Capture

Table of Contents

1. Introduction

2. Ground Documentation – StructionSite

3. Aerial Documentation + Mapping – DroneDeploy

4. File Index

Project: Madawaska, ME - LPOE

Prepared for: GSA

Prepared by: Danielle Breaux, Stephen DeVito and John Serdakowski

Madawaska LPOE Existing Site Conditions:

Aerial + Ground Capture Viewing Instructions

NOTE: 52.236-3 Site Investigation and Conditions Affecting the Work. The Government assumes no responsibility for any conclusions or interpretations made by the Contractor based on the information made available by the Government. Nor does the Government assume responsibility for any understanding reached or representation made concerning conditions which can affect the work by any of its officers or agents before the execution of this contract, unless that understanding or representation is expressly stated in this contract.

Any annotations or any measurements from DroneDeploy and/or StructionSite are not to be used for cost estimating, design and/or construction purposes. The intent is to give a visualization of the topography of the site without having to be onsite. Site utilization and final design are subject to change per GSA

Revision Date: September 9th, 2020

1. Introduction:

1.1. Project Overview: The project consists of the design and construction of a new U.S.

Land Port of Entry (LPOE) in Madawaska, Maine by the General Services Administration

(GSA). The new LPOE in Madawaska, Maine will replace the current 1959 mission & operationally deficient LPOE situated on a 0.9 acre site that does not meet the U.S.

Government's requirements and mission. The program of requirements for this new

LPOE is an approximately 76,717 GSF facility on a 10.7 acres site that includes a Main

Port Building, Commercial Inspection Building, 3 primary inspection lanes, and a bypass lane. The existing facility connects Madawaska, Maine with Edmundston, New

Brunswick via the International Bridge, spanning the St. John River. The International

Bridge is nearing the end of its useful life based on its current condition and functionality. The Madawaska-Edmundston International bridge replacement project, by the Maine Department of Transportation (MaineDOT), is a concurrent design and construction project. These two distinct and separate projects require strong multi-disciplinary and cross agency coordination, with completion of the LPOE upon the bridge opening by November 2023.

1.2. Existing Site Conditions Capture: The Madawaska LPOE existing site was documented by both the air and on the ground. The existing LPOE and Bridge existing site area was documented on the ground. The aerial views were captured using a drone on August 19th, 2020. The 360° ground images were captured on August 17th – 19th, 2020.

1.3. Virtual Site Access: Offerors will be able to virtually view the site with a variety of offline files as well as online tools. DroneDeploy was used to process the drone captures to create orthoscopic views as well as mapping and 3D models. StructionSite was used to capture images on the ground with a 360° camera and a cell phone camera. Further instructions can be found in this document.

NOTE: 52.236-3 Site Investigation and Conditions Affecting the Work. The Government assumes no responsibility for any conclusions or interpretations made by the Contractor based on the information made available by the Government. Nor does the Government assume responsibility for any understanding reached or representation made concerning conditions which can affect the work by any of its officers or agents before the execution of this contract, unless that understanding or representation is expressly stated in this contract.

Any annotations or any measurements from DroneDeploy and/or StructionSite are not to be used for cost estimating, design and/or construction purposes. The intent is to give a visualization of the topography of the site without having to be onsite. Site utilization and final design are subject to change per GSA

2. Ground Documentation – StructionSite : StructionSite will give viewers 360° images at ground level of the existing site as of the end of August 2020. These images are located with “pins”on an aerial view of the site with the existing site plan laid over top in purple. An online application will let users view the images without a local download or a local download is available so the images can be completely offline.

2.1. StructionSite Online Version: The online viewing option will be accessed through a web browser, no data will be saved on your local computer.

Step 1. Accessing StructionSite. To view this project on StructionSite.com use the following link: https://app.structionsite.com/vp/dae2130c-94c2-4556-95c9-d6b4af0542f4

Step 2. Accessing Images. When you open the link, you will see the two “Drawings”, Existing LPOE and Bridge and Existing Site at the New Bridge Landing. To enter into either of these just click on one to choose it. This viewer will consolidate the image pins if you are zoomed out. You will see colored circles (see Figure 2.2) with numbers in the middle which tells you how many pictures are located in that location. Use the scroll on your mouse or clock on the circles to zoom in and the circles will break apart so you can see the individual pins.

Figure 2.2

Step 3. Navigating and Viewing Images. Once a drawing is opened, you will notice orange pins and blue triangles on the PDF (see Figure 2.1). To view any of the pins, click on the pin, a preview screen will appear in the top left of your current screen, click on the preview to make it full size. To navigate the 360° environment, click and hold then drag your mouse to look around. You can use the mouse scroller to zoom in and out.

You can easily navigate to other pins in this option by using the “Mini Map” on the bottom left of your screen, just click on another pin to view that location. To return to the drawing view, use the back arrow at the top left.

https://app.structionsite.com/vp/dae2130c-94c2-4556-95c9-d6b4af0542f4 https://app.structionsite.com/vp/dae2130c-94c2-4556-95c9-d6b4af0542f4

NOTE: 52.236-3 Site Investigation and Conditions Affecting the Work. The Government assumes no responsibility for any conclusions or interpretations made by the Contractor based on the information made available by the Government. Nor does the Government assume responsibility for any understanding reached or representation made concerning conditions which can affect the work by any of its officers or agents before the execution of this contract, unless that understanding or representation is expressly stated in this contract.

Any annotations or any measurements from DroneDeploy and/or StructionSite are not to be used for cost estimating, design and/or construction purposes. The intent is to give a visualization of the topography of the site without having to be onsite. Site utilization and final design are subject to change per GSA

2.2. StructionSite Offline Version: To access the images that were taken from ground level on an offline PDF, locate the zip file provided to you named “StructionSite –

Ground Pictures”. This folder will have to be moved to your local computer in order for it to work. The file is 13 GB so it will take up a fair amount of space on your computer and may take a few hours to download depending on your internet connection speed.

Step 1. Saving Files to Local Computer. This folder will have to be moved to your local computer to access and view. Right click on that file and choose the option to “Copy” the folder and then find a desired location on your computer's drive and right click and choose the option to “Paste”.

Step 2. Extract Zip Files. Once the zip file is located on your computer, you will need to unzip the file. You can unzip the file by right clicking the folder and selecting “Extract

All…”. The unzipping tool will then ask you where you want to extract the folder to, choose the destination and then click “Extract”.

Step 3. Accessing and Utilizing the Files. Once the file has been extracted you will then be able to use the files within. When you open the file, you will find two folders.

One labeled “Drawings” the other labeled “Media”.

The “Drawings” folder will be the most helpful to view the images and to see where these images were captured. Open the Drawings folder, at this point you can choose to open two PDFs with a PDF viewer, the Existing LPOE and Bridge or the Existing Site at the New Bridge Landing.

Step 4. Accessing Images. Once a drawing is opened, you will notice orange pins and blue triangles on the PDF (see Figure 2.1). The orange pins are 360° pictures, and the blue triangles are standard cell phone pictures. To view either type of picture click on the pin. If you click on a 360° viewer, the PDF viewer may use your web browser to open the 360° environment. This image is locally stored, the web browser is not getting this image from online.

Figure 2.1:

NOTE: 52.236-3 Site Investigation and Conditions Affecting the Work. The Government assumes no responsibility for any conclusions or interpretations made by the Contractor based on the information made available by the Government. Nor does the Government assume responsibility for any understanding reached or representation made concerning conditions which can affect the work by any of its officers or agents before the execution of this contract, unless that understanding or representation is expressly stated in this contract.

Any annotations or any measurements from DroneDeploy and/or StructionSite are not to be used for cost estimating, design and/or construction purposes. The intent is to give a visualization of the topography of the site without having to be onsite. Site utilization and final design are subject to change per GSA

Step 5. Navigating and Viewing a 360 Image. To navigate a 360° picture, click and hold then drag on the screen to look around. You can also use the scroll on your mouse to zoom in and out. The standard cell phone pictures will use your default image viewer on your computer to open. You can zoom in and out on these pictures as well by using the scroller on your mouse.

3. Aerial Documentation + Mapping – DroneDeploy: DroneDeploy was used to process drone images to create a complete up to date aerial image, topographic mapping and a 3D model. This tool is available online and there are a number of offline deliverables available as well.

3.1. DroneDeploy Online Version: The online viewing option will be accessed through a web browser, no data will be saved on your local computer.

Step 1. Accessing aerial documentation through DroneDeploy.com use the following link:

https://www.dronedeploy.com/app2/data/5f3dd3dea2502c344b820b7e;jwt_token=eyJ

0eXAiOiJKV1QiLCJhbGciOiJIUzUxMiJ9.eyJleHAiOjI1MzQwMjMwMDc5OSwiaWQiOiI1ZjNk

ZDNkZWEyNTAyYzM0NGI4MjBiN2UiLCJzY29wZSI6WyJhZTgzYTJlMzQzX0Q0QzM2MjlFRD

RPUEVOUElQRUxJTkUiXSwidHlwZSI6IlJlYWRPbmx5UGxhbiIsIm92ZXJsYXlfZm9sZGVyX2lkI joiNWYxYjNiNzExZjA5YzM4OWI5OWQ2OTIyIn0.uvWZ8fUVSk2m9OO8LSDGj53tOHaENB

ZLmGlfrtycUua9dztUyIBRmdfU1iDJOtkttOkfZf1gp537pLxCyWtuwg.

Step 2. Navigating and Viewing Aerial Documentation. When viewing the project online you will have a toolbar on the left side of your screen. Starting from the top of the tool bar, you will not have to Sign Up or Log In to use. All exports are available in the zip file provided to you. You can choose to view the project in a Map view or a

Model view. In the Map view you can navigate by clicking, holding and dragging your mouse and using the scroll to zoom in and out. You will be able to turn on and off Plant

Health and Elevation Views as well as overlays of drawings that have been uploaded to the project. Four annotations have been added for your reference to give you an idea of the topography, again this is not to be used for design or construction. You can view an annotation either by clicking on the blue lines on the Map view or by choosing the

Annotations tab. You can also add an annotation by using the measuring tools.

To view the 3D Model online choose the Model option next to the Map option. To https://www.dronedeploy.com/app2/data/5f3dd3dea2502c344b820b7e;jwt_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzUxMiJ9.eyJleHAiOjI1MzQwMjMwMDc5OSwiaWQiOiI1ZjNkZDNkZWEyNTAyYzM0NGI4MjBiN2UiLCJzY29wZSI6WyJhZTgzYTJlMzQzX0Q0QzM2MjlFRDRPUEVOUElQRUxJTkUiXSwidHlwZSI6IlJlYWRPbmx5UGxhbiIsIm92ZXJsYXlfZm9sZGVyX2lkIjoiNWYxYjNiNzExZjA5YzM4OWI5OWQ2OTIyIn0.uvWZ8fUVSk2m9OO8LSDGj53tOHaENBZLmGlfrtycUua9dztUyIBRmdfU1iDJOtkttOkfZf1gp537pLxCyWtuwg https://www.dronedeploy.com/app2/data/5f3dd3dea2502c344b820b7e;jwt_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzUxMiJ9.eyJleHAiOjI1MzQwMjMwMDc5OSwiaWQiOiI1ZjNkZDNkZWEyNTAyYzM0NGI4MjBiN2UiLCJzY29wZSI6WyJhZTgzYTJlMzQzX0Q0QzM2MjlFRDRPUEVOUElQRUxJTkUiXSwidHlwZSI6IlJlYWRPbmx5UGxhbiIsIm92ZXJsYXlfZm9sZGVyX2lkIjoiNWYxYjNiNzExZjA5YzM4OWI5OWQ2OTIyIn0.uvWZ8fUVSk2m9OO8LSDGj53tOHaENBZLmGlfrtycUua9dztUyIBRmdfU1iDJOtkttOkfZf1gp537pLxCyWtuwg https://www.dronedeploy.com/app2/data/5f3dd3dea2502c344b820b7e;jwt_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzUxMiJ9.eyJleHAiOjI1MzQwMjMwMDc5OSwiaWQiOiI1ZjNkZDNkZWEyNTAyYzM0NGI4MjBiN2UiLCJzY29wZSI6WyJhZTgzYTJlMzQzX0Q0QzM2MjlFRDRPUEVOUElQRUxJTkUiXSwidHlwZSI6IlJlYWRPbmx5UGxhbiIsIm92ZXJsYXlfZm9sZGVyX2lkIjoiNWYxYjNiNzExZjA5YzM4OWI5OWQ2OTIyIn0.uvWZ8fUVSk2m9OO8LSDGj53tOHaENBZLmGlfrtycUua9dztUyIBRmdfU1iDJOtkttOkfZf1gp537pLxCyWtuwg https://www.dronedeploy.com/app2/data/5f3dd3dea2502c344b820b7e;jwt_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzUxMiJ9.eyJleHAiOjI1MzQwMjMwMDc5OSwiaWQiOiI1ZjNkZDNkZWEyNTAyYzM0NGI4MjBiN2UiLCJzY29wZSI6WyJhZTgzYTJlMzQzX0Q0QzM2MjlFRDRPUEVOUElQRUxJTkUiXSwidHlwZSI6IlJlYWRPbmx5UGxhbiIsIm92ZXJsYXlfZm9sZGVyX2lkIjoiNWYxYjNiNzExZjA5YzM4OWI5OWQ2OTIyIn0.uvWZ8fUVSk2m9OO8LSDGj53tOHaENBZLmGlfrtycUua9dztUyIBRmdfU1iDJOtkttOkfZf1gp537pLxCyWtuwg https://www.dronedeploy.com/app2/data/5f3dd3dea2502c344b820b7e;jwt_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzUxMiJ9.eyJleHAiOjI1MzQwMjMwMDc5OSwiaWQiOiI1ZjNkZDNkZWEyNTAyYzM0NGI4MjBiN2UiLCJzY29wZSI6WyJhZTgzYTJlMzQzX0Q0QzM2MjlFRDRPUEVOUElQRUxJTkUiXSwidHlwZSI6IlJlYWRPbmx5UGxhbiIsIm92ZXJsYXlfZm9sZGVyX2lkIjoiNWYxYjNiNzExZjA5YzM4OWI5OWQ2OTIyIn0.uvWZ8fUVSk2m9OO8LSDGj53tOHaENBZLmGlfrtycUua9dztUyIBRmdfU1iDJOtkttOkfZf1gp537pLxCyWtuwg https://www.dronedeploy.com/app2/data/5f3dd3dea2502c344b820b7e;jwt_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzUxMiJ9.eyJleHAiOjI1MzQwMjMwMDc5OSwiaWQiOiI1ZjNkZDNkZWEyNTAyYzM0NGI4MjBiN2UiLCJzY29wZSI6WyJhZTgzYTJlMzQzX0Q0QzM2MjlFRDRPUEVOUElQRUxJTkUiXSwidHlwZSI6IlJlYWRPbmx5UGxhbiIsIm92ZXJsYXlfZm9sZGVyX2lkIjoiNWYxYjNiNzExZjA5YzM4OWI5OWQ2OTIyIn0.uvWZ8fUVSk2m9OO8LSDGj53tOHaENBZLmGlfrtycUua9dztUyIBRmdfU1iDJOtkttOkfZf1gp537pLxCyWtuwg

NOTE: 52.236-3 Site Investigation and Conditions Affecting the Work. The Government assumes no responsibility for any conclusions or interpretations made by the Contractor based on the information made available by the Government. Nor does the Government assume responsibility for any understanding reached or representation made concerning conditions which can affect the work by any of its officers or agents before the execution of this contract, unless that understanding or representation is expressly stated in this contract.

Any annotations or any measurements from DroneDeploy and/or StructionSite are not to be used for cost estimating, design and/or construction purposes. The intent is to give a visualization of the topography of the site without having to be onsite. Site utilization and final design are subject to change per GSA navigate the 3D model, click, hold and drag the mouse to rotate the model. Use the scroller on your moose to zoom in and out. Hold the Shift key and click, hold and drag to

Pan. Overlays and annotations are not available in the view only 3D model. You can choose to view the Model as a point cloud if you click on the Point Cloud switch bar.

To view individual images it is recommended to navigate to the 3D Model then click the switch next to the images. This will show you all the individual picture locations from where you can click on the camera for a more detailed picture of that area.

*If you get stuck on a menu with no back button select back or select the back button on your browser*

NOTE: 52.236-3 Site Investigation and Conditions Affecting the Work. The Government assumes no responsibility for any conclusions or interpretations made by the Contractor based on the information made available by the Government. Nor does the Government assume responsibility for any understanding reached or representation made concerning conditions which can affect the work by any of its officers or agents before the execution of this contract, unless that understanding or representation is expressly stated in this contract.

Any annotations or any measurements from DroneDeploy and/or StructionSite are not to be used for cost estimating, design and/or construction purposes. The intent is to give a visualization of the topography of the site without having to be onsite. Site utilization and final design are subject to change per GSA

3.2. DroneDeploy Offline Version: There are multiple different file types to utilize from the offline deliverable from the drone imagery. An index of all the files can be located in

Section 4 of this document. The following chart (Figure 3.1) provided by

DroneDeploy.com that describes each type of file available and what they can be used for. All of these files will be located in the master zip file named “DroneDeploy - 3D

Mapping and Aerial Pictures”. To use these files, this folder will have to be moved to your local computer.

Step 1. Saving File to Local Computer. Right click on that file and choose the option to “Copy” the folder and then find a desired location on your computer's drive and right click and choose the option to “Paste”.

Step 2. Extract Zip Files. Once the zip file is located on your computer, you will need to unzip the file. You can unzip the file by right clicking the folder and selecting “Extract

All…”. The unzipping tool will then ask you where you want to extract the folder to, choose the destination and then click “Extract”. There will be other folders to extract inside the master file as well, depending on which file format you are trying to utilize

(see Figure 3.1).

Available DroneDeploy File Formats. Figure 3.1 identifies the available file formats that can be extracted based on user needs.

Figure 3.1

File Format Notes

JPG

(RGB Image)

● Available for all 2D layers: 2D Map, Elevation, Digital Terrain Model and Plant Health.

● Includes a .KML file and a .TWF file with the georeferenced metadata.

● Easy to share through any standard image software such as Windows Photo Viewer or Preview. Print or use within presentations.

● Available in our Pro, Business, and Enterprise subscriptions.

GeoTIFF (RGB Image)

● Available for all 2D layers: 2D Map, Elevation, Digital Terrain Model and Plant Health.

● Includes a .TWF file with the georeferenced metadata.

● Includes a .KML file when using the Web Mercator Projection.

● File format suited for 2D analysis in GIS software such as ArcGIS or QGIS.

GeoTIFF (Raw Elevation

● Available for Elevation and Digital Terrain Model exports.

● One-band GeoTIFF file with embedded elevation values.

● File format suited for 2D analysis in GIS software such as ArcGIS or QGIS.

NOTE: 52.236-3 Site Investigation and Conditions Affecting the Work. The Government assumes no responsibility for any conclusions or interpretations made by the Contractor based on the information made available by the Government. Nor does the Government assume responsibility for any understanding reached or representation made concerning conditions which can affect the work by any of its officers or agents before the execution of this contract, unless that understanding or representation is expressly stated in this contract.

Any annotations or any measurements from DroneDeploy and/or StructionSite are not to be used for cost estimating, design and/or construction purposes. The intent is to give a visualization of the topography of the site without having to be onsite. Site utilization and final design are subject to change per GSA

Values - DEM) ● Only available in our Business, and Enterprise subscriptions.

DXF/SHP

(Contour files)

● Available for Elevation and Digital Terrain Model exports.

● Georeferenced lines of equal elevation according to the chosen interval.

See Contours.

● For use in AutoDesk suite and Mining/Construction software.

● Only available in our Business, and Enterprise subscriptions.

Shapefile (Contour files)

● Available for Plant Health exports.

● Plant health data stored as a set of shapes (polygons) with a default resolution of

~10m x 10m (size depends on latitude). See Shapefile Exports.

OBJ

(3D Model)

● Digital Model. .obj surface with .jpg texture files model.

● Not georeferenced: defined in a model-local coordinate system.

LAS

(Point Cloud)

● .las point cloud.

● Can be used in AutoCAD, ArcGIS, Global Mapper, Applied Imagery, or similar software.

XYZ

(Point Cloud)

● .xyz point cloud that contains RGB information (XYZRGB). Resolution is specifiable.

● Most common file format accepted across Construction/Mining software formats.

PDF Export ● Available in our application natively.

● Able to export a PDF of 2D, Elevation, Digital Terrain Model and Plant

Health layers.

● Available on all paid subscriptions.

RCP File Export

● AutoCad Specific File

● Only Available for our Enterprise Subscribers.

● Easily import your export into AutoCAD

Source Imagery

(ZIP)

● Zip file containing the processed map’s source imagery

● Available to Enterprise Only

● Can be combined with auto exports and supported integrations

4. DroneDeploy and StructionSite File Index: Figure 4.1 outlines the various DroneDeploy and

StructionSite files located within the offline Zip File provided as well as the online version files.

Figure 4.1

DroneDeploy - 3D Mapping and Aerial Pictures https://support.dronedeploy.com/docs/contours https://support.dronedeploy.com/docs/initial-shapefile-exports http://desktop.arcgis.com/en/arcmap/10.3/manage-data/las-dataset/what-is-a-las-dataset-.htm http://support.dronedeploy.com/docs/importing-point-cloud-data-into-autocad-civil-3d-2016 https://support.dronedeploy.com/docs/viewing-las-point-cloud-in-arcgis

NOTE: 52.236-3 Site Investigation and Conditions Affecting the Work. The Government assumes no responsibility for any conclusions or interpretations made by the Contractor based on the information made available by the Government. Nor does the Government assume responsibility for any understanding reached or representation made concerning conditions which can affect the work by any of its officers or agents before the execution of this contract, unless that understanding or representation is expressly stated in this contract.

Any annotations or any measurements from DroneDeploy and/or StructionSite are not to be used for cost estimating, design and/or construction purposes. The intent is to give a visualization of the topography of the site without having to be onsite. Site utilization and final design are subject to change per GSA

Offline Access File Provided: DroneDeploy - 3D Mapping and Aerial Pictures.zip

3D Maps File Format Available (also see Figure 3.1)

01 - Orthomosaic ● GeoTIFF

● JPG

● PDF

● Site Use Drawing Layovers (PDF)

02 - Plant Health ● GeoTIFF

● JPG

● PDF

● Shapefile

03 - Elevation ● AutoCad - Contour DXF

● GeoTIFF

● JPG

● PDF

● Raw Elevation Values - DEM

● Shapefile - Contour SHP

04 - Digital Terrain Model (DTM) ● AutoCad - Contour DXF

● GeoTIFF

● JPG

● PDF

● Raw Elevation Values - DEM

● Shapefile Contour SHP

05 - 3D Model ● 3D Model - obj

06 - Point Cloud ● ASCII xyzrgb - xyz

● Autodesk - rcp

● LIDAR Data Exchange - las

07- Source Data ● source_data_export

StructionSite - Ground Pictures

Offline Access File Provided: StructionSite GSA_Madawaska LPOE - 360 degree Ground Images.zip

Base Drawings Media Available

01_Existing Site at New Bridge Landing.pdf

● 360 Photos (depicted with orange pins)

● Progress PDF (NOT USED)

● Standard Photos (depicted with blue triangles)

● Viewable 360 Photos

02_Existing LPOE and Bridge.pdf ● 360 Photos (depicted with orange pins)

● Progress PDF (NOT USED)

● Standard Photos (depicted with blue triangles)

● Viewable 360 Photos