472_24059.SAA - WHV VMS Genetec Phase 2 Cameras - Drawings Part 2 of 3.pdf

PDF 19 MB Posted Jul 24, 2026

Attached to: 472/24059. SAA; WHVCF - VMS Genetec Phase 2 Cameras
Solicitation number: RFQ 171 260000000347 4
Issued by: Huron County, Michigan

About this file

Written by GovTribe AI · Jul 27, 2026

This document comprises technical drawings and specifications for the Video Management System (VMS) Genetec Phase 2 camera installation project at the Women's Huron Valley Correctional Facility in Ypsilanti, Michigan, prepared by Matrix Consulting Engineers, Inc. for the Michigan Department of Technology, Management and Budget, State Facilities Administration, Design and Construction Division. The project involves the installation of new security cameras, cabling infrastructure, and network equipment throughout the correctional facility. The scope includes multiple camera types manufactured by Hanwha, including 4K exterior remote aimable cameras, exterior PTZ cameras with 2-megapixel, 40x zoom capability, 360-degree fisheye cameras with onboard microphones, indoor dome cameras ranging from 4 to 8 megapixels with 4K resolution, indoor PTZ cameras, anti-ligature observation cell cameras, freezer cameras, and multi-head cameras with 180/270/360-degree viewing capabilities. The work encompasses installation of CAT-6 and fiber optic cabling, perimeter network cabinets with fiber connectivity, patch panels, PoE injectors for PTZ cameras, surge suppressors, modular jacks, cable supports, and conduit systems meeting MDOC standards. The drawings were issued for bid on June 11, 2026, with the project number 472/24059.SAA and consultant job number 1065_24B.

The technical specifications detail extensive installation requirements including camera mounting on drop ceilings, hard ceilings, walls, building exteriors, corners, and poles at heights coordinated with facility ownership. Cable support systems must utilize J-hooks and bridle rings installed every five feet minimum, with absolute prohibitions against use of ty-wraps, tape, or direct attachment to building steel, HVAC ducts, or conduits. The project requires new surge suppressors and lightning arrestors for all CAT-6 cables entering cabinets, new PoE injectors for each PTZ and multi-head camera, and comprehensive labeling of all components using laser-printed, self-laminating wrap-around labels following specified naming conventions. Network infrastructure upgrades include relocation of existing switches into new wall-mounted cabinets at Jennings Hall with associated power strips and UPS connections, termination of existing camera cables onto new patch panels in numerical camera order, and provision of new green patch cables for all existing cameras. The project requires coordination with facility ownership for camera shutdown and cutover procedures, Genetec software licensing for all new cameras exceeding existing facility counts, and identification of any additional ethernet switch requirements. Installation must comply with MDOC standards for conduit systems, including specific strap spacing, pull box specifications, nylon bushings, and sealant requirements for both interior and exterior applications.

View the file

Other files

File	Type	Posted
472_24059.SAA - WHV VMS Genetec Phase 2 Cameras - Drawings Part 1 of 3.pdf	PDF	Jul 24, 2026
472_24059.SAA - WHV VMS Genetec Phase 2 Cameras - Drawings Part 3 of 3.pdf	PDF	Jul 24, 2026
472_24059_SAA_WHV - VMS Genetec Phase 2 Cameras - ADD 01 - COMPLETE.pdf	PDF	Jul 24, 2026
472_24059_SAA_WHV - VMS Genetec Phase 2 Cameras - Mich Spec - 20260612.pdf	PDF	Jul 24, 2026
472_24059_SAA_WHV - VMS Genetec Phase 2 Cameras - ADD 02.pdf	PDF	Jul 24, 2026
LEIN Request 24059.pdf	PDF	Jul 24, 2026
Service Disabled Veteran Owned Business Info Sheet 2025.pdf	PDF	Jul 24, 2026
472_24059_SAA_WHV - VMS Genetec Phase 2 Cameras - ADD 03.pdf	PDF	Jul 24, 2026
472_24059_SAA_WHV - VMS Genetec Phase 2 Cameras - Advertisement For Bid.pdf	PDF	Jul 24, 2026
Attachment A - WHV Asbestos Report_compressed - Part 2 of 2.pdf	PDF	Jul 24, 2026
Attachment A - WHV Asbestos Report_compressed - Part 1 of 2.pdf	PDF	Jul 24, 2026

Show all 11

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CAMERA EQUIPMENT SCHEDULE

MARK DESCRIPTION MANUFACTURER PART NO. MIC ONBOARD DROP CEILING HARD

CEILING/WALL

BUILDING

EXTERIOR

BUILDING

EXTERIOR

CORNER

POLE MOUNT

ABBREVIATIONS

ABBREV. DESCRIPTION ABBREV. DESCRIPTION

PC-XXX

LT-XXX

NETWORK EQUIPMENT SCHEDULE

MARK DESCRIPTION MANUFACTURER PART NO.

COMMUNICATION CABLE SCHEDULE

MARK DESCRIPTION MANUFACTURER PART NO.

SECURITY SYMBOL LEGEND

SYMBOL DESCRIPTION

ATTIC STOCK EQUIPMENT

MARK DESCRIPTION

COMMUNICATION EQUIPMENT SCHEDULE

MARK DESCRIPTION MANUFACTURER PART NO.

TC101

WHV CABLING LEGENDS,

DETAILS AND

SCHEDULES

C om m te ch

D es ig n

G R

N E.

, S U

B R

O C

R D

, M

W W

W .C

O M

C H

.C O

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

M a t r ix

AutoCAD SHX Text

EXTERIOR (OR INTERIOR) 4K. POLE OR BUILDING MOUNTED, REMOTE AIMABLE.

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

PNV-A9082RZ

AutoCAD SHX Text

USE T-BAR ABOVE CEILING

AutoCAD SHX Text

NOT REQUIRED. CAM HAS CONDUIT CUTOUT

AutoCAD SHX Text

SBP-300WMW1-ARM SBP-180HMW1-CAP SBP-300NBW-BOX

AutoCAD SHX Text

SBP-300WMW1-ARM SBP-180HMW1-CAP SBP-300NBW-BOX SBP-300KMW1-MOUNT

AutoCAD SHX Text

SBP-300WMW1-ARMSBP-180HMW1-CAP SBP-300PMW2-POLE SBP-300NBW-BOX SBP-150S-STRAPS

AutoCAD SHX Text

EXTERIOR PTZ CAMERA. POLE OR BUILDING MOUNTED. 2-MEGAPIXEL, 40X ZOOM MINIMUM

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

XNP-C6403R

AutoCAD SHX Text

SBP-300WMW1-ARM SBP-156HMW-CAP SBP-300NBW-BOX

AutoCAD SHX Text

SBP-300WMW1-ARM SBP-156HMW-CAP SBP-300NBW-BOX SBP-300KMW1-MOUNT

AutoCAD SHX Text

SBP-300WMW1-ARMSBP-156HMW-CAP SBP-300PMW2-POLE SBP-300NBW-BOX SBP-150S-STRAPS

AutoCAD SHX Text INDOOR AND OUTDOOR 360 FISHEYE. SINGLE IMAGER, 12 MEGAPIXEL. EQUIPPED WITH MULTIPLE ON BOARD MICROPHONES

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

XNF-A9014RV

AutoCAD SHX Text

YES

AutoCAD SHX Text

USE T-BAR ABOVE CEILING

AutoCAD SHX Text

SBV-160BW -PLATE

AutoCAD SHX Text

SBP-300WMW1-ARM SBP-160HMW1-CAP SBP-300NBW-BOX

AutoCAD SHX Text

SBP-300WMW1-ARM SBP-160HMW1-CAP SBP-300NBW-BOX SBP-300KMW1-MOUNT

AutoCAD SHX Text

INDOOR DOME CAMERA, 4 MEGAPIXEL. EQUIPPED WITH MULTIPLE ON-BOARD MICROPHONES

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

PND-A7082RV

AutoCAD SHX Text

YES

AutoCAD SHX Text

USE T-BAR ABOVE CEILING

AutoCAD SHX Text

INDOOR WALL MOUNT: SBP-160WMW1-ARM

AutoCAD SHX Text

AutoCAD SHX Text INDOOR DOME CAMERA, 8 MEGAPIXEL. EQUIPPED WITH MULTIPLE ON-BOARD MICROPHONES. 4K RESOLUTION

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

PND-A9082RV

AutoCAD SHX Text

YES

AutoCAD SHX Text

USE T-BAR ABOVE CEILING

AutoCAD SHX Text

INDOOR WALL MOUNT: SBP-160WMW1-ARM

AutoCAD SHX Text

INDOOR PTZ CAMERA. VISITING ROOM. DROP OR HARD CEILING

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

XNP-6120HW

AutoCAD SHX Text

SHP-1680FPW RECESS MOUNT W/T-BAR

AutoCAD SHX Text

OBSERVATION CELL CAMERA. ANTI-LIGATURE. CORNER MOUNT

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

TNV-C7013RV

AutoCAD SHX Text

AutoCAD SHX Text FREEZER CAMERA. INDOOR AND OUTDOOR 360 FISHEYE. SINGLE IMAGER, 12 MEGAPIXEL. EQUIPPED WITH MULTIPLE ON BOARD MICROPHONES

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

XNF-A8014RV

AutoCAD SHX Text

SBV-180WW -OUTDOOR PLATE

AutoCAD SHX Text

AutoCAD SHX Text MULTI-HEAD CAMERA 180/270/360 DEGREES 4x4K LENSES, MOUNT ON BUILDING, POLE OR CORNER OF BLDG. PROVIDE CORRECT MOUNTS. REMOTE AIMABLE.

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

PNM-C32083RQZ

AutoCAD SHX Text

SHD-315F 2X2 TILE REPLACEMENT

AutoCAD SHX Text

NONE REQ'D

AutoCAD SHX Text

SBP-315HMW-CAP SBP-300WMW1-ARM SBP-300NBW-BOX

AutoCAD SHX Text

SBP-315HMW-CAP SBP-300WMW1-ARM SBP-300NBW-BOX SBP-300KMW1-MOUNT

AutoCAD SHX Text

SBP-315HMW-CAP SBP-300WMW1-ARM SBP-300NBW-BOX SBP-300PMW2-POLE SBP-150S-STRAP

AutoCAD SHX Text MULTI-HEAD CAMERA 180/270/360 DEGREES 4x4K LENSES, MOUNT ON BUILDING, POLE OR CORNER OF BLDG. PROVIDE CORRECT MOUNTS. SHALL INCLUDE PTZ CAMERA. FIXED CAMERAS ARE REMOTE AIMABLE.

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

PNM-C34404RQPZ

AutoCAD SHX Text

SBP-300WMW-ARM SBP-300NBW-BOX

AutoCAD SHX Text

SBP-300WMW-ARM SBP-300NBW-BOX SBP-300KMW1-MOUNT

AutoCAD SHX Text

SBP-300WMW-ARM -ARM SBP-300NBW-BOX SBP-300PMW2-POLE SBP-150S-STRAP

AutoCAD SHX Text

2-SENSOR CAMERA. SURFACE MOUNT-INDOOR TWO 6MP SENSORS

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

PNM-C12083RVD

AutoCAD SHX Text

USE T-BAR ABOVE CEILING

AutoCAD SHX Text

NONE REQ'D

AutoCAD SHX Text

180 DEGREE, PANORAMIC, INDOOR/OUTDOOR MULTI-SENSOR DOME CAMERA

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

PNM-A13022RV

AutoCAD SHX Text

NONE REQ'D

AutoCAD SHX Text

AutoCAD SHX Text RACK MOUNT SHELF FOR PTZ POWER INJECTORS. INSTALL WHERE REQUIRED IN EACH BUILDING TO SUPPORT PTZ INJECTORS AND OTHER DEVICES THAT SHALL BE IN THE RACK.

AutoCAD SHX Text

MIDDLE ATLANTIC

AutoCAD SHX Text

UFA-14.5

AutoCAD SHX Text

INDOOR 5MP DROP OR HARD CEILING OR WALL

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

XND-A8085RV

AutoCAD SHX Text

USE T-BAR ABOVE CEILING

AutoCAD SHX Text

INDOOR WALL MOUNT: SBP-160WMW1-ARM

AutoCAD SHX Text N/A

AutoCAD SHX Text

AutoCAD SHX Text CONTRACTOR SHALL PROVIDE ALL FACTORY MOUNTING EQUIPMENT/PARTS FOR CAMERAS BASED ON THE MOUNTING LOCATION

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text

CCC-YYXX

AutoCAD SHX Text R

AutoCAD SHX Text 2G

AutoCAD SHX Text

TWO-GANG BOX - PROVIDED BY EC

AutoCAD SHX Text

NIC

AutoCAD SHX Text

NOT IN CONTRACT

AutoCAD SHX Text

AutoCAD SHX Text ABOVE COUNTER - INSTALL BACKBOX SAME HEIGHT AS OTHER ELECTRICAL OUTLETS ABOVE THE COUNTER.

AutoCAD SHX Text

PBO

AutoCAD SHX Text

PROVIDED BY OTHERS

AutoCAD SHX Text

AFF

AutoCAD SHX Text

ABOVE FINISHED FLOOR

AutoCAD SHX Text

PCO-1

AutoCAD SHX Text

PATCH CORD ORGANIZER - 1 UNIT HIGH

AutoCAD SHX Text

AFG

AutoCAD SHX Text

ABOVE FINISHED GROUND

AutoCAD SHX Text

PCO-2

AutoCAD SHX Text

PATCH CORD ORGANIZER - 2 UNITS HIGH

AutoCAD SHX Text

AWG

AutoCAD SHX Text

AMERICAN WIRE GAUGE

AutoCAD SHX Text

PER

AutoCAD SHX Text

PROTECTED ENTRANCE TERMINAL

AutoCAD SHX Text

C-EMT

AutoCAD SHX Text

EMT TYPE CONDUIT

AutoCAD SHX Text

QTY

AutoCAD SHX Text

QUANITY

AutoCAD SHX Text

ELECTRICAL CONTRACTOR

AutoCAD SHX Text X

AutoCAD SHX Text NEW PoE INJECTOR TO BE PROVIDED FOR ALL NEW AND EXISTING PTZ CAMERAS MOUNTED TO THE BUILDING EXTERIOR.

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

SPO-8315

AutoCAD SHX Text

24 STRAND, SINGLEMODE FIBER CABLE. INDOOR/OUTDOOR RATED.

AutoCAD SHX Text

OCC

AutoCAD SHX Text

DX024TSLX9YP

AutoCAD SHX Text

NOT USED

AutoCAD SHX Text

EXTERIOR RATED CAT-6A CABLE FOR ETHERNET CONNECTIVITY.

AutoCAD SHX Text

BELDEN

AutoCAD SHX Text

OSB6U

AutoCAD SHX Text

PLENUM RATED, GREEN, CAT-6 CABLE FOR ETHERNET CONNECTIVITY.

AutoCAD SHX Text

MOHAWK

AutoCAD SHX Text M58286

AutoCAD SHX Text LONG DISTANCE, PLENUM RATED CABLE. USE FOR CAMERAS MORE THAN 300' AWAY FROM THE COMM ROOM.

AutoCAD SHX Text

GAME CHANGER

AutoCAD SHX Text 258300310

AutoCAD SHX Text LONG DISTANCE, OUTDOOR RATED CABLE. USE FOR CAMERAS MORE THAN 300' AWAY FROM THE COMM ROOM.

AutoCAD SHX Text

GAME CHANGER

AutoCAD SHX Text 258340804

AutoCAD SHX Text

AutoCAD SHX Text THIS SYMBOL WITH A NUMBER INSIDE REFERS TO KEYNOTES. REFER TO NOTES ON THE SHEET FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text EQUIPMENT SCHEDULE. THIS SYMBOL WITH LETTERS INSIDE REFERS EQUIPMENT SCHEDULES, SEE DETAILS AND EQUIPMENT SCHEDULES ON TC101, TC301, TC501 AND TC701.

AutoCAD SHX Text CABLE SCHEDULE. THIS SYMBOL WITH NUMBERS INSIDE REFERS EQUIPMENT SCHEDULES, SEE DETAILS AND EQUIPMENT SCHEDULES ON TC101, TC301, TC501 AND TC701.

AutoCAD SHX Text ACCESS CONTROL SYMBOL. "XX" IS LETTERS. SEE DETAILS ON TC5XX SHEETS FOR EQUIPMENT, CABLING AND RACEWAY DETAILS.

AutoCAD SHX Text ACCESS CONTROL SYMBOL FOR EXISTING DEVICES. "XX" IS LETTERS. SEE DETAILS ON TC5XX SHEETS. LEAVE DEVICES AND CONNECT TO NEW SYSTEM OR LEAVE AS CONNECTED TO EXISTING SYSTEM. SEE NOTES AND DETAILS

AutoCAD SHX Text SECURITY CAMERA AT NEW LOCATION. PROVIDE AND INSTALL A NEW SECURITY CAMERA. SEE DETAILS ON TC1XX SHEETS.

AutoCAD SHX Text SECURITY CAMERA WITH 180 DEGREE VIEWING. PROVIDE AND INSTALL A NEW SECURITY CAMERA. SEE DETAILS ON TC1XX SHEETS.

AutoCAD SHX Text SECURITY CAMERA WITH 360 DEGREE VIEWING, SINGLE-IMAGER. PROVIDE AND INSTALL A NEW SECURITY CAMERA. SEE DETAILS ON TC1XX SHEETS.

AutoCAD SHX Text SECURITY CAMERA WITH 360 DEGREE VIEWING, MULTI-IMAGER. PROVIDE AND INSTALL A NEW SECURITY CAMERA. SEE DETAILS ON TC1XX SHEETS.

AutoCAD SHX Text EXISTING SECURITY CAMERA TO REMAIN. LEAVE IN PLACE AND CONFIGURE ON NEW VMS SYSTEM.

AutoCAD SHX Text CAMERA NUMBER AND CABLE TO BE USED FOR REPLACEMENT OF EXISTING CAMERA AT THE SAME LOCATION. CONFIGURE NEW CAMERA ON NEW VMS SYSTEM.

AutoCAD SHX Text EXISTING SECURITY CAMERA TO BE REMOVED. PROVIDE ALL PATCHING OF WALL OR CEILING PENETRATION AS REQ'D.

AutoCAD SHX Text COMPUTER. PROVIDE AND INSTALL A PC FOR THE SECURITY SYSTEM. SEE DETAILS ON TC1XX SHEETS FOR REQUIREMENTS.

AutoCAD SHX Text LAPTOP COMPUTER. PROVIDE AND INSTALL A LAPTOP FOR THE SECURITY SYSTEM. SEE DETAILS ON TC1XX SHEETS FOR REQUIREMENTS.

AutoCAD SHX Text

CAMERA IDENTIFIER - CCC = SITE CODE - YY = BUILDING NUMBER/XX = CAMERA NUMBER.

AutoCAD SHX Text

POLE IDENTIFIER - PL = POLE

AutoCAD SHX Text NEW CAMERA POLE - CONTRACTOR TO INSTALL NEW POLE AT THIS LOCATION TO SUPPORT NEW CAMERA LOCATION. SEE ELECTRICAL DRAWINGS.

AutoCAD SHX Text NEW PERIMETER NETWORK CABINET WITH FIBER CONNECTIVITY. CABINET PROVIDES LOCAL CONNECTIONS TO CAMERAS AND LIGHTING FOR CONTROL. REFER TO DETAILS FOR CABINET EQUIPMENT BUILD OUTS.

AutoCAD SHX Text MONITOR AND MOUNT LOCATION - REFER TO DETAILS FOR MOUNTING AND CABLING REQUIREMENTS.

AutoCAD SHX Text SECURITY PANEL. PROVIDE PANEL AND CONNECT AS SHOWN ON FLOORPLANS AND IN THE SPECIFICATIONS.

AutoCAD SHX Text

DOOR NUMBER

AutoCAD SHX Text

CAB-XXX

AutoCAD SHX Text P

AutoCAD SHX Text

LCD.XX"

AutoCAD SHX Text

XXX

AutoCAD SHX Text

SEC.PNL

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text SEE ATTIC STOCK SPECIFICATION 28 7100 FOR EQUIPMENT TO BE PROVIDED AS PART OF ATTIC STOCK

AutoCAD SHX Text 2-POST RACK:7'x19" BLACK RELAY RACK EQUIPPED WITH ONE FULL-LENGTH 6" VERTICAL ORGANIZER. RELAY RACK IS TO BE CONFIGURED WITH VERTICAL & HORIZONTAL CABLE LADDER AS SHOWN ON THE DRAWINGS AND AS DESCRIBED IN THE SPECS. EACH RACK SHALL BE CONFIGURED WITH ONE (1) 6" WIDE VERTICAL ORGANIZER WITH A COVER.

AutoCAD SHX Text

ORTRONICS

AutoCAD SHX Text

19-84-T2SD-B/ VO-84-T6E/ VO-84-T6CVE

AutoCAD SHX Text

SINGLE RACK UNIT PATCH CORD ORGANIZER (PCO-1) WITH HINGED COVER.

AutoCAD SHX Text

HUBBELL

AutoCAD SHX Text

HS13C

AutoCAD SHX Text PATCH PANEL-24 PORT, EQUIPPED WITH 8-PIN MODULAR JACKS TO MATCH THE CABLE COLOR AND CABLE TYPE BEING TERMINATED. PROVIDE ONE MODULAR JACK FOR EACH CABLE BEING TERMINATED. SEE SPEC AND DRAWINGS FOR COLORS. EQUIP WITH REAR CABLE ORGANIZER.

AutoCAD SHX Text

HUBBELL

AutoCAD SHX Text

PANEL:HPJ24 ORGANIZER:HPRCMB

AutoCAD SHX Text RACK MOUNT FIBER PANEL. USE WHEN TERMINATING 24 OR LESS FIBER STRANDS. PROVIDE EACH FIBER PANEL WITH "LC" 12 OR 24 PACKS AS REQUIRED FOR TERMINATION OF ALL FIBERS. PROVIDE SPLICE TRAY AND SHELF FOR FUSION SPLICES TO PIGTAILS.

AutoCAD SHX Text

HUBBELL

AutoCAD SHX Text

FPR3SP

AutoCAD SHX Text FIBER OPTIC CABLE STOWAGE RING. WALL MOUNTED. 12" OR 24". PROVIDE AND INSTALL TO SUPPORT BEND RADIUS REQUIREMENTS OF THE FIBER CABLE.

AutoCAD SHX Text

LEVITON

AutoCAD SHX Text

12" #48900-IFR / 24" #48900-OFR

AutoCAD SHX Text

CAT-6 POE LIGHTNING ARRESTOR. INSTALL AND CONNECT TO GROUND WITH WIRE.

AutoCAD SHX Text

SEE ELECTRICAL SPECS

AutoCAD SHX Text

SEE ELECTRICAL SPECS

AutoCAD SHX Text

SURFACE MOUNT BOX FOR NEW CABLES IN PERIMETER CABINET. SIZE AS REQUIRED.

AutoCAD SHX Text

HUBBELL

AutoCAD SHX Text

HSB SERIES.

AutoCAD SHX Text POWER STRIP, VERTICAL, FOR EACH RACK. SALL HAVE (36) NEMA 5-15/20R RECEPTACLES. PLUG INTO WALL OUTLET. SHALL HAVE L5-20P PLUG AND 15' CORD.ATTACH TO THE RACK OR VERTICAL CABLE LADDER OF EACH RACK.

AutoCAD SHX Text

EATON

AutoCAD SHX Text

PDUMV20-72

AutoCAD SHX Text 48" TALL WALL MOUNT CABINET. 24 RACK UNITS. INCLUDE PLEXIGLAS FRONT DOOR AND POWER STRIP, RACK MOUNTED POWER STRIP

AutoCAD SHX Text

HUBBELL

AutoCAD SHX Text

HSQ4826

AutoCAD SHX Text 4-POST ADJUSTABLE RACK. PUNCHED 3/8" HOLES. EQUIP WITH TWO 6" VERTICAL ORGANIZERS. EQUIP WITH CAGE NUTS FOR 19" RACK COMPONENTS. EQUIP WIITH CABLE LADDER AS PER SPECS AND DETAILS.

AutoCAD SHX Text

ORTRONICS

AutoCAD SHX Text

19-84-SSDA2132

AutoCAD SHX Text VERTICAL ORGANIZER FOR MOUNTING TO THE SIDE OF A RACK. WHERE THE RACK IS LESS THAN 7', CUT OFF VERTICAL ORGANIZER TO FIT RACK.

AutoCAD SHX Text

RXL

AutoCAD SHX Text

3326-BK06

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text F

AutoCAD SHX Text H

AutoCAD SHX Text E

AutoCAD SHX Text J

AutoCAD SHX Text K

AutoCAD SHX Text N

AutoCAD SHX Text O

AutoCAD SHX Text P

AutoCAD SHX Text Q

AutoCAD SHX Text

SHEET NUMBER

AutoCAD SHX Text

472/24059.SAA

AutoCAD SHX Text file no.

AutoCAD SHX Text checked by

AutoCAD SHX Text drawn by

AutoCAD SHX Text consultant

AutoCAD SHX Text issue date

AutoCAD SHX Text acctg template.

AutoCAD SHX Text contract order no.

AutoCAD SHX Text 472WHVMaintproj

AutoCAD SHX Text consultant job no.

AutoCAD SHX Text 1065_24B

AutoCAD SHX Text sheet title

AutoCAD SHX Text

VIDEO SECURITY FLOOR PLANS

AutoCAD SHX Text

VMS GENETEC PHASE 2 CAMERAS

AutoCAD SHX Text

WOMEN'S HURON VALLEY CORRECTIONAL FACILITY

AutoCAD SHX Text

YPSILANTI ,MICHIGAN

AutoCAD SHX Text Y22432

AutoCAD SHX Text

VIDEO SECURITY UPGRADES

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text 06/11/26

AutoCAD SHX Text

ISSUED FOR BID

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: 517.487.2544

AutoCAD SHX Text

PHONE: 517.487.2511

AutoCAD SHX Text

LANSING, MI 48917

AutoCAD SHX Text

544 CHERBOURG DRIVE

AutoCAD SHX Text

MATRIX PROJECT:

AutoCAD SHX Text WEB: www.matrixceinc.com

TC102

USER PC

CONNECTIVITY CODE

TC102

TYPICAL PERIMETER CAMERA CABLE LABELS

AT FACEPLATE & PATCH PANEL

TC102

FIBER OPTIC CABLE AT PERIMETER CABINETS

LABELING AT PATCH PANEL

TC102

UTP PATCH PANEL (TYP)

TC102

TYPICAL DATA CABLE LABELING

AT FACEPLATE AND PATCH PANEL11

TC102

TYPICAL FACEPLATE LABELING

TC102

USER PC

CONNECTIVITY CODE

TC102

CONNECTIVITY CODE

TC102

CONNECTIVITY CODE

TC102

CONNECTIVITY CODE

TC102

USER PC

CONNECTIVITY CODE

TC102

CONNECTIVITY CODE

TC102

CONNECTIVITY CODE

TC102

WHV CABLING &

SECURITY MOUNTING

DETAILS

C om m te ch

D es ig n

G R

N E.

, S U

B R

O C

R D

, M

W W

W .C

O M

C H

.C O

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

M a t r ix

AutoCAD SHX Text PARTS CONNECTIVITY CODE CONNECTIVITY CODE QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 GFI PLATE-STAINLESS HUBBELL SS26 GFI PLATE-STAINLESS HUBBELL SS26 HUBBELL SS26 SS26 1 CAT-6 CABLES-GREEN MOHAWK M58286 CAT-6 CABLES-GREEN MOHAWK M58286 MOHAWK M58286 M58286 1 CAT-6 JACK HUBBELL HXJ6GN CAT-6 JACK HUBBELL HXJ6GN HUBBELL HXJ6GN HXJ6GN 1 ONE HOLE GFI PLATE HUBBELL NS611OWONE HOLE GFI PLATE HUBBELL NS611OWHUBBELL NS611OWNS611OW

AutoCAD SHX Text

DATA

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

AutoCAD SHX Text ±18" A.F.F.

AutoCAD SHX Text NOTES: 1. PROVIDE A SURFACE MOUNT BOX TO THE BUILDING PROVIDE A SURFACE MOUNT BOX TO THE BUILDING STRUCTURE NEAR THE SECURITY CAMERA LOCATION. 2. HEIGHT IS AT 18" UNLESS OTHERWISE NOTED ON THE HEIGHT IS AT 18" UNLESS OTHERWISE NOTED ON THE PLANS. 3. SEE CEILING PLAN FOR INSTALLATION. EC TO INSTALL SEE CEILING PLAN FOR INSTALLATION. EC TO INSTALL CONDUIT FOR LOCATIONS WHERE THE CAMERA IS IN AN OPEN CEILING. 4. USE ONLY SECURITY SCREWS WITH THESE PLATES. USE ONLY SECURITY SCREWS WITH THESE PLATES. 5. LABEL THE FACEPLATE WITH A LASER PRINTED LABEL.LABEL THE FACEPLATE WITH A LASER PRINTED LABEL.

AutoCAD SHX Text 1" CONDUIT WITH A NYLON BUSHING. STUB TO: ABOVE DROP CEILING OR TO BOTTOM OF STRUCTURAL STEEL IN OPEN CEILING AREA TO AN ACCESSIBLE CEILING AREA

AutoCAD SHX Text

1-GANG BACKBOX HUBBELL-BELL #5387-0

AutoCAD SHX Text

%%UOUTLET IN CEILING

AutoCAD SHX Text

AAA-BBB-CCCC

AutoCAD SHX Text

WRAP-AROUND LABEL

AutoCAD SHX Text

AA-BB-CCC

AutoCAD SHX Text

WRAP-AROUND LABEL

AutoCAD SHX Text

AA-BB-CCC

AutoCAD SHX Text

CAT-6 CABLE

AutoCAD SHX Text

AAA-BBB-CCCC

AutoCAD SHX Text

LABELS

AutoCAD SHX Text

AAA-BBB

AutoCAD SHX Text

CCCC

AutoCAD SHX Text

%%UWALL MOUNTED

AutoCAD SHX Text

WRAP-AROUND LABEL

AutoCAD SHX Text

AA-BB-CCC

AutoCAD SHX Text

WRAP-AROUND LABEL

AutoCAD SHX Text

AA-BB-CCC

AutoCAD SHX Text

%%UFIBER PANEL

AutoCAD SHX Text

FIBER CABLE

AutoCAD SHX Text

XXX-YYY/XXX-YYY ZZAA

AutoCAD SHX Text

%%URACK MOUNTED

AutoCAD SHX Text

%%UFIBER PANEL

AutoCAD SHX Text

XXX-YYY/XXX-YYY ZZAA

AutoCAD SHX Text

LABEL PANELS CONSECUTIVELY IN THE COMM ROOM, A THRU Z

AutoCAD SHX Text

CONNECTIONS FOR PC'S (TYPICAL)

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ZZZZ

AutoCAD SHX Text

ADHESIVE LABEL WITH CAMERA NUMBER (TYP)

AutoCAD SHX Text %%uBACK OF FACEPLATE

AutoCAD SHX Text %%uBACK OF PATCH PANEL

AutoCAD SHX Text

AA-X-YY

AutoCAD SHX Text

WRAP-AROUND LABEL

AutoCAD SHX Text 33-3204-02

AutoCAD SHX Text

WRAP-AROUND LABEL

AutoCAD SHX Text 33-3204-02

AutoCAD SHX Text %%uIN COMM ROOM

AutoCAD SHX Text

AA-X-YY

AutoCAD SHX Text

DATA

AutoCAD SHX Text

DATA

AutoCAD SHX Text

AA-X

AutoCAD SHX Text

BLANK

AutoCAD SHX Text

AA-X-YY

AutoCAD SHX Text

DATA

AutoCAD SHX Text

DATA

AutoCAD SHX Text A-X

AutoCAD SHX Text

%%USURFACE MOUNT OUTLET

AutoCAD SHX Text

PAPER BEHIND

AutoCAD SHX Text

WINDOW

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

%%USTANDARD PLATE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text NOTES: 1. INSTALL A WRAP-AROUND LABEL AT EACH END OF EACH CABLE. 2. WRAP-AROUND LABELS SHALL BE LASER-PRINTED AND SHALL BE SELF-LAMINATING. 3. WHEN LABELING PATCH PANELS IN A COMM ROOM, START AT THE TOP OF THE FIRST RACK AND THEN LABEL CONSECUTIVELY DOWN THE RACK AND THEN TOP TO BOTTOM IN OTHER RACKS.

AutoCAD SHX Text CAMERA CABLING LABEL A-Y-ZZ-YYY A = COMMUNICATIONS ROOM, A, B..ETC X = PATCH PANEL IN THAT RACK OR CABINET 1-X YY = PORT ON THAT PANEL FROM 01-24 ZZZZ = CAMERA NUMBER

AutoCAD SHX Text NOTES: 1. INSTALL A LABEL TO EACH PATCH PANEL DETAILING THE 4. THE CABLES SHALL BE TERMINATED ON THE PATCH PANEL INSTALL A LABEL TO EACH PATCH PANEL DETAILING THE 4. THE CABLES SHALL BE TERMINATED ON THE PATCH PANEL COMM ROOM NUMBER AND THAT IT IS A SECURITY IN NUMERICAL CAMERA ORDER. NO EXCEPTIONS. PATCH PANEL. 2. ALL LABELS SHALL BE LASER PRINTED AND CUT TO FIT. 5. CABLES THAT ARE NOT CONNECTED TO A CAMERA SHALL BE ALL LABELS SHALL BE LASER PRINTED AND CUT TO FIT. 5. CABLES THAT ARE NOT CONNECTED TO A CAMERA SHALL BE ALL NUMBERS SHALL EXACTLY ALIGN WITH THE TERMINATED AT THE END OF THE PATCH PANELS AND SHALL LOCATION ON THE PATCH PANEL. NOT BE LABELED WITH THE ZZZ ON THEM. 3. EACH PORT SHALL BE LABELED FOR THE CAMERA NUMBER TO WHICH THE PORT IS CONNECTED IF IT IS CONNECTED TO A CAMERA.

AutoCAD SHX Text CAMERA CABLING LABEL A-X-YY AA = COMMUNICATIONS ROOM, A, B..ETC X = PATCH PANEL IN THAT RACK OR CABINET 1-X YY = PORT ON THAT PANEL FROM 01-48

AutoCAD SHX Text NOTES: 1. INSTALL A WRAP-AROUND LABEL AT EACH END OF EACH CABLE. 2. WRAP-AROUND LABELS SHALL BE LASER-PRINTED SHALL BE SELF-LAMINATING. AAA = CABINET NUMBER BBB = POLE NUMBER CCCC = CAMERA NUMBER 3. INSTALL LABEL ON FRONT OF EACH PANEL

AutoCAD SHX Text NOTES: 1. INSTALL A WRAP-AROUND LABEL AT EACH END OF EACH CABLE. 2. WRAP-AROUND LABELS SHALL BE LASER-PRINTED AND BE SELF-LAMINATING. XXX = CABINET OR BUILDING. CAB/ADM IN EXAMPLE YYY = CABINET NUMBER OR BUILDING ABBREVIATION ZZ = FIBER STRAND COUNT AA = MULTIMODE MM OR SINGLEMODE SM

AutoCAD SHX Text NOTES: 1. INSTALL A PAPER LABEL BEHIND THE PLASTIC WINDOW IN STANDARD PLATES THAT ARE EQUIPPED WITH THE WINDOWS. 2. PROVIDE ADHESIVE LABELS ON WALL PHONE PLATES AND SURFACE MOUNT OUTLETS AND PLATES WITHOUT LABELING WINDOWS. DATA CABLE LABEL AA = COMMUNICATIONS ROOM, A, B..ETC X = PATCH PANEL IN THAT RACK OR CABINET 1-X YY = PORT ON THAT PANEL FROM 01-48

AutoCAD SHX Text CAMERA CABLING LABEL A-X-YY AA = COMMUNICATIONS ROOM, A, B..ETC X = PATCH PANEL IN THAT RACK OR CABINET 1-X YY = PORT ON THAT PANEL FROM 01-48

AutoCAD SHX Text

6-PORT PANEL IN CABINET

AutoCAD SHX Text

DATA

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

DATA

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

AutoCAD SHX Text ±18" A.F.F.

AutoCAD SHX Text 1" CONDUIT WITH A NYLON BUSHING. STUB TO: ABOVE DROP CEILING OR TO BOTTOM OF STRUCTURAL STEEL IN OPEN CEILING AREA TO AN ACCESSIBLE CEILING AREA

AutoCAD SHX Text

1-GANG BACKBOX HUBBELL-BELL #5387-0

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text PARTS CONNECTIVITY CODE CONNECTIVITY CODE QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 GFI PLATE-STAINLESS HUBBELL SS26 GFI PLATE-STAINLESS HUBBELL SS26 HUBBELL SS26 SS26 2 CAT-6 CABLES-GREEN MOHAWK M58286 CAT-6 CABLES-GREEN MOHAWK M58286 MOHAWK M58286 M58286 2 CAT-6 JACK HUBBELL HXJ6GN CAT-6 JACK HUBBELL HXJ6GN HUBBELL HXJ6GN HXJ6GN 1 TWO HOLE GFI PLATE HUBBELL ISF2OWTWO HOLE GFI PLATE HUBBELL ISF2OWHUBBELL ISF2OWISF2OW

AutoCAD SHX Text INSTALLATION NOTES: 1. PROVIDE A SURFACE MOUNT BOX TO THE BACKBOX AT THE PROVIDE A SURFACE MOUNT BOX TO THE BACKBOX AT THE SECURITY CAMERA LOCATION. 2. SEE FLOOR PLAN FOR INSTALLATION LOCATION. SEE 2/TC106 SEE FLOOR PLAN FOR INSTALLATION LOCATION. SEE 2/TC106 MDOC STD. DETAIL FOR HEIGHT OF CAMERA AND CABLING.

AutoCAD SHX Text PARTS CONNECTIVITY CODE CONNECTIVITY CODE QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 SURFACE BOX HUBBELL HSB1OW SURFACE BOX HUBBELL HSB1OW HUBBELL HSB1OW HSB1OW 1 CAT-6 CABLES-GREEN MOHAWK M58286 CAT-6 CABLES-GREEN MOHAWK M58286 MOHAWK M58286 M58286 1 CAT-6 JACK HUBBELL HXJ6GNCAT-6 JACK HUBBELL HXJ6GNHUBBELL HXJ6GNHXJ6GN

AutoCAD SHX Text

SECURITY CAMERA-OUTDOOR

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

SEE SITE PLAN DRAWINGS FOR HEIGHT

AutoCAD SHX Text

COMMUNICATION CABLE, 5' COIL

AutoCAD SHX Text

SURFACE BOX

AutoCAD SHX Text

LABEL

AutoCAD SHX Text PARTS CONNECTIVITY CODE CONNECTIVITY CODE QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 SURFACE BOX HUBBELL HSB2OW SURFACE BOX HUBBELL HSB2OW HUBBELL HSB2OW HSB2OW 2 CAT-6 CABLES-GREEN MOHAWK M58286 CAT-6 CABLES-GREEN MOHAWK M58286 MOHAWK M58286 M58286 2 CAT-6 JACK HUBBELL HXJ6GNCAT-6 JACK HUBBELL HXJ6GNHUBBELL HXJ6GNHXJ6GN

AutoCAD SHX Text

SECURITY CAMERA-OUTDOOR

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

SEE SITE PLAN DRAWINGS FOR HEIGHT

AutoCAD SHX Text

COMMUNICATION CABLE, 5' COIL

AutoCAD SHX Text

SURFACE BOX

AutoCAD SHX Text INSTALLATION NOTES: 1. PROVIDE A SURFACE MOUNT BOX TO THE BUILDING STRUCTURE PROVIDE A SURFACE MOUNT BOX TO THE BUILDING STRUCTURE NEAR THE SECURITY CAMERA LOCATION. 2. SEE FLOORPLAN FOR LOCATION. SEE FLOORPLAN FOR LOCATION. 3. SEE ARCHITECTURAL REFLECTED CEILING PLAN FOR TYPESEE ARCHITECTURAL REFLECTED CEILING PLAN FOR TYPE

AutoCAD SHX Text

PENDANT CAMERA

AutoCAD SHX Text

CAMERA

AutoCAD SHX Text

CAT-6 PATCH BY OTHERS

AutoCAD SHX Text

15' COIL OF CABLE

AutoCAD SHX Text

CAT-6 CABLE

AutoCAD SHX Text

OPEN CEILING INSTALLATION

AutoCAD SHX Text

SECURITY CAMERA

AutoCAD SHX Text

ABOVE DROP CEILING INSTALLATION

AutoCAD SHX Text

15' COIL OF CABLE

AutoCAD SHX Text

CAT-6 SURFACE BOX

AutoCAD SHX Text

SURFACE MOUNTED CAMERA

AutoCAD SHX Text

CAT-6 SURFACE BOX

AutoCAD SHX Text

DATA

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

DATA

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

AutoCAD SHX Text ±18" A.F.F.

AutoCAD SHX Text 1" CONDUIT WITH A NYLON BUSHING. STUB TO: ABOVE DROP CEILING OR TO BOTTOM OF STRUCTURAL STEEL IN OPEN CEILING AREA TO AN ACCESSIBLE CEILING AREA

AutoCAD SHX Text

1-GANG BACKBOX HUBBELL-BELL #5387-0

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text PARTS CONNECTIVITY CODE CONNECTIVITY CODE QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 GFI PLATE-STAINLESS HUBBELL SS26 GFI PLATE-STAINLESS HUBBELL SS26 HUBBELL SS26 SS26 3 CAT-6 CABLES-GREEN MOHAWK M58286 CAT-6 CABLES-GREEN MOHAWK M58286 MOHAWK M58286 M58286 3 CAT-6 JACK HUBBELL HXJ6GN CAT-6 JACK HUBBELL HXJ6GN HUBBELL HXJ6GN HXJ6GN 1 THREE HOLE GFI PLATE HUBBELL ISF3OWTHREE HOLE GFI PLATE HUBBELL ISF3OWHUBBELL ISF3OWISF3OW

AutoCAD SHX Text

DATA

AutoCAD SHX Text

LABEL

AutoCAD SHX Text PARTS CONNECTIVITY CODE CONNECTIVITY CODE QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 SURFACE BOX HUBBELL HSB1OW SURFACE BOX HUBBELL HSB1OW HUBBELL HSB1OW HSB1OW 1 CAT-6 CABLES-GREEN PAIGE 250300303 CAT-6 CABLES-GREEN PAIGE 250300303 PAIGE 250300303 250300303 1 CAT-6 JACK HUBBELL HXJ6GNCAT-6 JACK HUBBELL HXJ6GNHUBBELL HXJ6GNHXJ6GN

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

SECURITY CAMERA-INDOOR OR OUTDOOR-LONG RANGE CABLE

AutoCAD SHX Text

SEE TRXXX DRAWINGS FOR HEIGHT AND CAMERA FLOORPLANS LOCATION OF BOX

AutoCAD SHX Text

COMMUNICATION CABLE, 15' COIL

AutoCAD SHX Text PARTS CONNECTIVITY CODE CONNECTIVITY CODE QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 SURFACE BOX HUBBELL HSB1OW SURFACE BOX HUBBELL HSB1OW HUBBELL HSB1OW HSB1OW 1 CAT-6 CABLES-GREEN PAIGE 250300303 CAT-6 CABLES-GREEN PAIGE 250300303 PAIGE 250300303 250300303 1 CAT-6 JACK HUBBELL HXJ6GNCAT-6 JACK HUBBELL HXJ6GNHUBBELL HXJ6GNHXJ6GN

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

SECURITY CAMERA-INDOOR OR OUTDOOR-LONG RANGE CABLE

AutoCAD SHX Text

PENDANT CAMERA

AutoCAD SHX Text

CAMERA

AutoCAD SHX Text

CAT-6 PATCH BY OTHERS

AutoCAD SHX Text

15' COIL OF CABLE

AutoCAD SHX Text

LONG RANGE CABLE

AutoCAD SHX Text

OPEN CEILING INSTALLATION

AutoCAD SHX Text

ABOVE DROP CEILING INSTALLATION

AutoCAD SHX Text

15' COIL OF CABLE

AutoCAD SHX Text

CAT-6 SURFACE BOX

AutoCAD SHX Text

SURFACE MOUNTED CAMERA

AutoCAD SHX Text

CAT-6 SURFACE BOX

AutoCAD SHX Text

LONG RANGE CABLE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

FIBER CABLE

AutoCAD SHX Text

SHEET NUMBER

AutoCAD SHX Text

472/24059.SAA

AutoCAD SHX Text file no.

AutoCAD SHX Text checked by

AutoCAD SHX Text drawn by

AutoCAD SHX Text consultant

AutoCAD SHX Text issue date

AutoCAD SHX Text acctg template.

AutoCAD SHX Text contract order no.

AutoCAD SHX Text 472WHVMaintproj

AutoCAD SHX Text consultant job no.

AutoCAD SHX Text 1065_24B

AutoCAD SHX Text sheet title

AutoCAD SHX Text

VIDEO SECURITY FLOOR PLANS

AutoCAD SHX Text

VMS GENETEC PHASE 2 CAMERAS

AutoCAD SHX Text

WOMEN'S HURON VALLEY CORRECTIONAL FACILITY

AutoCAD SHX Text

YPSILANTI ,MICHIGAN

AutoCAD SHX Text Y22432

AutoCAD SHX Text

VIDEO SECURITY UPGRADES

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text 06/11/26

AutoCAD SHX Text

ISSUED FOR BID

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: 517.487.2544

AutoCAD SHX Text

PHONE: 517.487.2511

AutoCAD SHX Text

LANSING, MI 48917

AutoCAD SHX Text

544 CHERBOURG DRIVE

AutoCAD SHX Text

MATRIX PROJECT:

100/1000 SFP

P10 Link/ActiveP9

Console

FAULT

9600.N.8.1

PWR2

PWR1

R.M.

PWR

Communication Networks

www.comnet.net 203-796-5300

10/100/1000T

100/1000 SFP

10/100/1000T

P10

P7 P8 P5 P6 P3 P4 P1 P2

PoE

MEAN WELLDRP-240-48

SWITCHING REGULATOR

POWER FACTOR CORRECTION

INPUT: 100-240VAC 3.5A

OUTPUT: 48V 5.0A

MADE IN TAIWAN

LN-V-V+V+V

DC OK

CNGE2FE8MSPOE

100/1000 SFP

P10 Link/ActiveP9

Console

FAULT

9600.N.8.1

PWR2

PWR1

R.M.

PWR

Communication Networks

www.comnet.net 203-796-5300

10/100/1000T

100/1000 SFP

10/100/1000T

P10

P7 P8 P5 P6 P3 P4 P1 P2

PoE

MEAN WELLDRP-240-48

SWITCHING REGULATOR

POWER FACTOR CORRECTION

INPUT: 100-240VAC 3.5A

OUTPUT: 48V 5.0A

MADE IN TAIWAN

LN-V-V+V+V

DC OK

TC103

NETWORK CABINET DETAIL

TYPICAL FOR PERIMETER CABINETS 4

TC103

WALLFIELD BUILD-OUT FOR CAMS ON POLES

THAT ARE FED FROM A BUILDING

TC103

REMOVE EXISTING CAMERA AND MIC

TYPICAL FOR ALL REMOVED/REPLACED CAMS

TC103

REMOVE EXISTING CAMERA AND MIC

TYPICAL FOR ALL REMOVED/REPLACED CAMS

TC103

REMOVE EXISTING EXTERIOR CAMERA

TYPICAL FOR ALL REMOVED/REPLACED CAMS

TC103

WHV CABLING &

PERIMETER CABINET

DETAILS

C om m te ch

D es ig n

G R

N E.

, S U

B R

O C

R D

, M

W W

W .C

O M

C H

.C O

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

M a t r ix

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

%%UFRONT VIEW

AutoCAD SHX Text

MOUNTING POLE

AutoCAD SHX Text

TYPICAL COMM CONDUITS

AutoCAD SHX Text

TO LIGHT POLES AND

AutoCAD SHX Text

OTHER CABINETS

AutoCAD SHX Text

NOTE 1

AutoCAD SHX Text

EXISTING MODULAR JACKS IN SURFACE MOUNT BOX.

AutoCAD SHX Text

CAT-6 PATCH (TYP)

AutoCAD SHX Text KEYED NOTES: PROVIDE ONE (1) SURGE SUPPRESSOR FOR EACH CAT-6 CABLE THAT IS FED INTO THE CABINET, NEW AND EXISTING. CONNECT TO GROUND BAR. ENSURE DIRECTION OF ARRESTOR IS CORRECT. SEE ONE LINE FOR QUANTITY OF EXISTING CAMERAS AND NEW CAMERAS AT EACH CABINET. CONNECT NEW CABLES AND LIGHTNING SUPPRESSORS TO THE GROUND BAR. ONE CONNECTION FOR EACH. INSTALL NEW POE INJECTORS FOR EACH PTZ CAMERA. REMOVE EXISTING AND PROVIDE TO THE OWNER. MOUNT TO CABINET AND CONNECT TO POWER. PROVIDE PATCH CABLES TO CONNECT CAMERAS TO ETHERNET SWITCH

AutoCAD SHX Text

AutoCAD SHX Text GENERAL NOTES: 1. CABINETS ARE EXISTING AT PERIMETER OF SITE. SEE SITE CABINETS ARE EXISTING AT PERIMETER OF SITE. SEE SITE PLANS FOR LOCATIONS 2. SEE SITE PLANS AND CAMERA ONE-LINE FOR LOCATIONS SEE SITE PLANS AND CAMERA ONE-LINE FOR LOCATIONS WHERE NEW CAMERAS AND CAMERA CABLES ARE TO BE INSTALLED. 3. REPLACE ALL THE EXISTING LIGHTNING ARRESTORS. CONNECT REPLACE ALL THE EXISTING LIGHTNING ARRESTORS. CONNECT TO NEW AND EXISTING MODULAR JACKS. 4. INSTALL NEW GROUND CABLE FROM CAMERA AND CAMERA INSTALL NEW GROUND CABLE FROM CAMERA AND CAMERA POLE TO THE CABINETS. SEE ELECTRICAL DRAWINGS FOR ADDITIONAL DETAILS. 5. DRESS ALL CABLING WHEN ROUTING WITHIN CABINET. UTILIZE DRESS ALL CABLING WHEN ROUTING WITHIN CABINET. UTILIZE WIRE DUCT WHENEVER POSSIBLE. 6. AT NO TIME SHALL PROTECTED, UNPROTECTED AND POWER AT NO TIME SHALL PROTECTED, UNPROTECTED AND POWER CABLES COME IN CONTACT WITH EACH OTHER. MAINTAIN SEPARATION BETWEEN 300 AND 600 VOLT RATED CABLES. 7. REFER TO ELECTRICAL DRAWINGS AND/OR SPECIFICATIONS REFER TO ELECTRICAL DRAWINGS AND/OR SPECIFICATIONS FOR ADDITIONAL CONDUIT, GROUNDING AND CABINET REQUIREMENTS.

AutoCAD SHX Text

EXISTING ETHERNET SWITCH

AutoCAD SHX Text

POWER SUPPLY FOR ENET SWITCH -TO REMAIN

AutoCAD SHX Text

CAT-6 PATCH CABLES (TYP)

AutoCAD SHX Text

ETHERNET SWITCHES ARE EXISTING IN PERIMETER CABINETS

AutoCAD SHX Text

FIBER OPTIC PATCH CABLE

AutoCAD SHX Text

PLUG STRIP -EXIST

AutoCAD SHX Text J

AutoCAD SHX Text

INSTALL NEW SURGE SUPPRESSOR/ LIGHTNING ARRESTOR

AutoCAD SHX Text

GROUND BAR-EXIST

AutoCAD SHX Text

EXISTING FIBER OPTIC PATCH PANEL

AutoCAD SHX Text

RESERVED FOR ELECTRICAL

AutoCAD SHX Text

CAT-6 CABLES TO NEW CAMERAS AT PERIMETER. SEE CAMERA ONE-LINE FOR QTY

AutoCAD SHX Text

POE INJECTORS

AutoCAD SHX Text

%%UFRONT VIEW

AutoCAD SHX Text J

AutoCAD SHX Text

GROUND BAR

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

FLOOR

AutoCAD SHX Text KEYED NOTES: PLYWOOD WALLFIELD IS EXISTING UNLESS NOTED ON THE FLOOR PLANS TO INSTALL A NEW ONE. WHERE REQUIRED, INSTALL A 4' X 4' X 3/4" FIRE-RATED PLYWOOD. CONFIRM LOCATION WITH OWNER AND ENGINEER BEFORE INSTALLATION. PROVIDE ONE (1) SURGE SUPPRESSOR FOR EACH CAT-6 CABLE THAT IS FED INTO THE BUILDING FROM OUTSIDE THE BUILDING'S "CONE OF PROTECTION". REPLACE EXISTING SURGE SUPPRESSORS. CONNECT NEW CABLES AND LIGHTNING SUPPRESSORS TO THE GROUND BAR. ONE CONNECTION FOR EACH. INSTALL NEW POE INJECTORS FOR EACH PTZ AND MULTIHEAD CAMERA. REMOVE EXISTING AND PROVIDE TO THE OWNER. MOUNT TO CABINET AND CONNECT TO POWER. PROVIDE PATCH CABLES TO CONNECT CAMERAS TO ETHERNET SWITCH SEE FLOOR PLANS AND SITE PLANS FOR NEW CABLING REQUIRED FOR NEW CAMERAS. INSTALL CABLE FROM CAMERA TO WALLFIELD AND FROM WALLFIELD TO COMM ROOM

AutoCAD SHX Text

AutoCAD SHX Text GENERAL NOTES: 1. WALLFIELD EXISTS UNLESS SPECIFICALLY NOTED TO INSTALL A WALLFIELD EXISTS UNLESS SPECIFICALLY NOTED TO INSTALL A NEW ONE. SEE FLOOR PLANS FOR NOTES ON NEW WALLFIELDS. ALL EQUIPMENT SHALL BE SECURELY MOUNTED TO THE WALLFIELD. 2. ANY NEW CABLES SHALL BE TERMINATED ONTO MODULAR ANY NEW CABLES SHALL BE TERMINATED ONTO MODULAR JACKS AND INTO SURFACE MOUNT BOXES. SEE CAMERA ONE LINE TO SEE WHERE NEW CAMERAS AND CABLES ARE TO BE INSTALLED 3. AT NO TIME SHALL UNPROTECTED AND PROTECTED CABLES AT NO TIME SHALL UNPROTECTED AND PROTECTED CABLES COME IN CONTACT WITH EACH OTHER. 4. WHERE OUTDOOR CAT-6 CABLES ROUTE THROUGH A BUILDING WHERE OUTDOOR CAT-6 CABLES ROUTE THROUGH A BUILDING THEY SHALL BE INSTALLED INSIDE CONDUIT. 5. LABEL ALL POWER INJECTORS FOR THE CAMERA THEY LABEL ALL POWER INJECTORS FOR THE CAMERA THEY CONNECT TO.

AutoCAD SHX Text

SURGE SUPPRESSOR, LIGHTNING ARRESTOR

AutoCAD SHX Text

2'X2' FIREPROOF PLYWOOD WALLFIELD

AutoCAD SHX Text

CAT-6 CABLE TO PATCH PANEL IN RACK (TYP)

AutoCAD SHX Text

TYPICAL COMM CONDUITS TO LIGHT POLES AND OTHER CABINETS

AutoCAD SHX Text

CAT-6 CABLES TO CAMERAS TYPICAL

AutoCAD SHX Text

HIGH POWER POE INJECTORS FOR PTZ CAMS

AutoCAD SHX Text

CAT-6 PATCH CABLES

AutoCAD SHX Text

CAT-6 CABLES FROM PANEL IN COMM ROOM.

AutoCAD SHX Text

EXISTING PLUG STRIP

AutoCAD SHX Text

INSTALL D-RINGS WHERE REQUIRED

AutoCAD SHX Text

EXISTING POWER OUTLET

AutoCAD SHX Text

EXISTING MODULAR JACKS IN SURFACE MOUNT BOX.

AutoCAD SHX Text

POE INJECTORS

AutoCAD SHX Text

EXISTING CAT-6 CABLES TO CAMERAS

AutoCAD SHX Text

NEW CAT-6 CABLES TO CAMERAS. SEE CAMERA ONE-LINE AND SITE PLAN FOR QTY.

AutoCAD SHX Text

MODULAR JACKS IN SURFACE MOUNT BOX. TERMINATE ALL NEW CABLES HERE FOR TESTING

AutoCAD SHX Text

MODULAR JACKS IN SURFACE MOUNT BOX. TERMINATE ALL NEW CABLES HERE FOR TESTING

AutoCAD SHX Text

NEW CAT-6 CABLES TO CAMERAS. SEE CAMERA ONE-LINE AND SITE PLAN FOR QTY.

AutoCAD SHX Text

CONNECT POWER INJECTORS TO POWER STRIP

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

MODULAR JACKS IN SURFACE MOUNT BOX. TERMINATE ALL NEW CABLES HERE FOR TESTING

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text NOTES 1. REMOVE EXISTING CAMERA AND MICROPHONE. DISPOSE OF OFFSITE. REMOVE EXISTING CAMERA AND MICROPHONE. DISPOSE OF OFFSITE. 2. REMOVE EXISTING MICROPHONE AND CABLE FROM THE BUILDING. REMOVE EXISTING MICROPHONE AND CABLE FROM THE BUILDING. DISPOSE OF OFFSITE. 3. TERMINATE EXISTING CATEGORY CABLE WITH AN 8-PIN MODULAR TERMINATE EXISTING CATEGORY CABLE WITH AN 8-PIN MODULAR JACK. INSTALL INTO A SURFACE MOUNT BOX. LABEL BOX AND CABLE FOR CAMERA NUMBER. SEE LABELING DETAILS. 4. MOVE CABLE TO NEW CAMERA LOCATION. IF CABLE IS NOT LONG MOVE CABLE TO NEW CAMERA LOCATION. IF CABLE IS NOT LONG ENOUGH THEN TERMINATE CABLE AND PROVIDE PATCH CABLE TO NEW CAMERA LOCATION. 5. INSTALL THE PATCH CABLE FROM CAT-6 CONNECTOR TO CAMERA. INSTALL THE PATCH CABLE FROM CAT-6 CONNECTOR TO CAMERA. SHALL BE PLENUM RATED IN PLENUM RATED CEILINGS. 6. COIL CABLE FROM CEILING MOUNTED J-HOOK COIL CABLE FROM CEILING MOUNTED J-HOOK 7. REPLACE CEILING TILE WITH OWNER PROVIDED TILE IF CAMERA IS REPLACE CEILING TILE WITH OWNER PROVIDED TILE IF CAMERA IS AT NEW LOCATION

AutoCAD SHX Text

REMOVE EXISTING CAMERA AND MICROPHONE -DROP CEILNG

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

REMOVE EXISTING MIC CABLE AND MIC POWER CABLE TO SOURCE

AutoCAD SHX Text

INSTALL J-HOOK ABOVE NEW CAMERA LOCATION

AutoCAD SHX Text

DROP CEILING

AutoCAD SHX Text

EXISTING CAMERA

AutoCAD SHX Text

%%UFRONT VIEW

AutoCAD SHX Text PARTS QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 GFI PLATE-STAINLESS HUBBELL SS26 GFI PLATE-STAINLESS HUBBELL SS26 HUBBELL SS26 SS26 1 CAT-6 CABLES- EXISTING CAT-6 CABLES- EXISTING EXISTING 1 CAT-6 JACK HUBBELL HXJ6GN CAT-6 JACK HUBBELL HXJ6GN HUBBELL HXJ6GN HXJ6GN 1 ONE HOLE GFI PLATE HUBBELL NS611OWONE HOLE GFI PLATE HUBBELL NS611OWHUBBELL NS611OWNS611OW

AutoCAD SHX Text

EXISTING CAT CABLE

AutoCAD SHX Text

LABEL

AutoCAD SHX Text NOTES 1. REMOVE EXISTING CAMERA AND MICROPHONE. DISPOSE OF OFFSITE. REMOVE EXISTING CAMERA AND MICROPHONE. DISPOSE OF OFFSITE. 2. REMOVE EXISTING MICROPHONE AND CABLE FROM THE BUILDING. REMOVE EXISTING MICROPHONE AND CABLE FROM THE BUILDING. DISPOSE OF OFFSITE. 3. TERMINATE EXISTING CATEGORY CABLE WITH AN 8-PIN MODULAR TERMINATE EXISTING CATEGORY CABLE WITH AN 8-PIN MODULAR JACK. INSTALL INTO A SURFACE MOUNT BOX. LABEL BOX AND CABLE FOR CAMERA NUMBER. SEE LABELING DETAILS. 4. MOVE CABLE TO NEW CAMERA LOCATION. IF CABLE IS NOT LONG MOVE CABLE TO NEW CAMERA LOCATION. IF CABLE IS NOT LONG ENOUGH THEN TERMINATE CABLE AND PROVIDE PATCH CABLE TO NEW CAMERA LOCATION. 5. INSTALL THE PATCH CABLE FROM CAT-6 CONNECTOR TO CAMERA. INSTALL THE PATCH CABLE FROM CAT-6 CONNECTOR TO CAMERA. SHALL BE PLENUM RATED IN PLENUM RATED CEILINGS. 6. COIL CABLE FROM CEILING MOUNTED J-HOOK COIL CABLE FROM CEILING MOUNTED J-HOOK 7. PATCH HARD CEILING WITH LIKE MATERIAL. SAND FLAT AND PAINT PATCH HARD CEILING WITH LIKE MATERIAL. SAND FLAT AND PAINT TO MATCH

AutoCAD SHX Text

REMOVE EXISTING CAMERA AND MICROPHONE -HARD/OPEN CEILING

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

REMOVE EXISTING MIC CABLE AND MIC POWER CABLE TO SOURCE

AutoCAD SHX Text

INSTALL J-HOOK ABOVE NEW CAMERA LOCATION

AutoCAD SHX Text

HARD CEILING

AutoCAD SHX Text

EXISTING CAMERA

AutoCAD SHX Text

EXISTING CAT CABLE

AutoCAD SHX Text

REMOVE EXISTING MIC CABLE AND MIC POWER CABLE TO SOURCE

AutoCAD SHX Text

INSTALL J-HOOK ABOVE NEW CAMERA LOCATION

AutoCAD SHX Text

OPEN CEILING

AutoCAD SHX Text

EXISTING CAMERA

AutoCAD SHX Text

EXISTING CAT CABLE

AutoCAD SHX Text

LABEL

AutoCAD SHX Text NOTES 1. REMOVE EXISTING CAMERA AND MOUNT DISPOSE OF OFFSITE. REMOVE EXISTING CAMERA AND MOUNT DISPOSE OF OFFSITE. 2. IF A NEW CAMERA IS TO REPLACE THIS CAMERA THEN INSTALL A IF A NEW CAMERA IS TO REPLACE THIS CAMERA THEN INSTALL A NEW CAMERA MFG. BACKBOX AND TERMINATE CABLE INTO THIS BACKBOX. 3. INSTALL CONDUIT THRU THE WALL AND SEAL AROUND CONDUIT INSTALL CONDUIT THRU THE WALL AND SEAL AROUND CONDUIT AND WALL AND BACKBOX. 4. TERMINATE EXISTING CATEGORY CABLE WITH AN 8-PIN MODULAR TERMINATE EXISTING CATEGORY CABLE WITH AN 8-PIN MODULAR JACK. INSTALL INTO A CAMERA BACK BOX. LABEL JACK AND CABLE FOR CAMERA NUMBER. SEE LABELING DETAILS. 5. MOVE CABLE TO NEW CAMERA LOCATION. IF CABLE IS NOT LONG MOVE CABLE TO NEW CAMERA LOCATION. IF CABLE IS NOT LONG ENOUGH THEN TERMINATE CABLE AND PROVIDE PATCH CABLE TO NEW CAMERA LOCATION. MARK CONNECTOR ON AS-BUILTS 6. INSTALL THE PATCH CABLE FROM MODULAR CONNECTOR TO INSTALL THE PATCH CABLE FROM MODULAR CONNECTOR TO CAMERA. SHALL BE PLENUM RATED IN PLENUM RATED CEILINGS. 7. SEE DETAIL ON TC104 FOR NEW CAMERA MOUNTINGSEE DETAIL ON TC104 FOR NEW CAMERA MOUNTING

AutoCAD SHX Text

REMOVE EXISTING CAMERA AND EXTERIOR CAMERA

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

EXISTING CAMERA

AutoCAD SHX Text

EXISTING CAT CABLE

AutoCAD SHX Text

INSTALL J-HOOK TO SUPPORT EXISTING CABLE

AutoCAD SHX Text

EXISTING CAT CABLE

AutoCAD SHX Text

SILCONE SEALANT

AutoCAD SHX Text

INSTALL EMT CONDUIT SIZE AS REQ'D

AutoCAD SHX Text

INSTALL HINGED BOX FOR CAMERA MOUNTING AND CONDUIT ATTACHMENT

AutoCAD SHX Text

SHEET NUMBER

AutoCAD SHX Text

472/24059.SAA

AutoCAD SHX Text file no.

AutoCAD SHX Text checked by

AutoCAD SHX Text drawn by

AutoCAD SHX Text consultant

AutoCAD SHX Text issue date

AutoCAD SHX Text acctg template.

AutoCAD SHX Text contract order no.

AutoCAD SHX Text 472WHVMaintproj

AutoCAD SHX Text consultant job no.

AutoCAD SHX Text 1065_24B

AutoCAD SHX Text sheet title

AutoCAD SHX Text

VIDEO SECURITY FLOOR PLANS

AutoCAD SHX Text

VMS GENETEC PHASE 2 CAMERAS

AutoCAD SHX Text

WOMEN'S HURON VALLEY CORRECTIONAL FACILITY

AutoCAD SHX Text

YPSILANTI ,MICHIGAN

AutoCAD SHX Text Y22432

AutoCAD SHX Text

VIDEO SECURITY UPGRADES

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text 06/11/26

AutoCAD SHX Text

ISSUED FOR BID

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: 517.487.2544

AutoCAD SHX Text

PHONE: 517.487.2511

AutoCAD SHX Text

LANSING, MI 48917

AutoCAD SHX Text

544 CHERBOURG DRIVE

AutoCAD SHX Text

MATRIX PROJECT:

TC104

INTERIOR CORNER MOUNT CAMERA

RACEWAY & SEALANT DETAIL

TC104

PARAPET MOUNT

CAMERA INSTALLATION

TC104

HARD CEILING MOUNT CAMERA RACEWAY

/SEALANT & CABLE LADDER DETAILS

TC104

TYPICAL OPEN-CEILING (PENDANT)

CAMERA INSTALLATION

TC104

TYPICAL DRYWALL OR DROP-CEILING

CAMERA INSTALLATION6

TC104

TYPICAL INTERIOR WALL/CEILING MOUNT

CAMERA INSTALLATION10

TC104

EXTERIOR CORNER, WALL MOUNT

CAMERA INSTALLATION

TC104

CAMERA THROUGH WALL

RACEWAY & SEALANT DETAIL-TYPICAL

TC104

EXTERIOR WALL MOUNT

CAMERA DETAILS

TC104

TYPICAL HARD CEILING

CAMERA INSTALLATION

TC104

WHV SECURITY MOUNTING

DETAILS

C om m te ch

D es ig n

G R

N E.

, S U

B R

O C

R D

, M

W W

W .C

O M

C H

.C O

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

M a t r ix

AutoCAD SHX Text

STUB TO ACCESSIBLE CEILING

AutoCAD SHX Text

CAT-6 CABLE

AutoCAD SHX Text

CAMERA

AutoCAD SHX Text NOTES: 1. ALL CAMERAS AND HARDWARE SHALL BE INSTALLED WITH ALL CAMERAS AND HARDWARE SHALL BE INSTALLED WITH SECURE SCREWS AND TAMPER-RESISTANT CALK. 2. INSTALL PATCH CORD FROM CAT-6 CONNECTOR TO CAMERA. INSTALL PATCH CORD FROM CAT-6 CONNECTOR TO CAMERA. 3. INSTALL A LABEL ON THE CAMERA THAT IS VISIBLE FROM BELOW INSTALL A LABEL ON THE CAMERA THAT IS VISIBLE FROM BELOW THE DROP CEILING. 4. CONTRACTOR SHALL PROVIDE BRACKETS TO POSITION CAMERA CONTRACTOR SHALL PROVIDE BRACKETS TO POSITION CAMERA INSIDE CORNER MOUNT. 5. POSITION CAMERA TO COVER ENTIRE AREA OF THE CELL.POSITION CAMERA TO COVER ENTIRE AREA OF THE CELL.

AutoCAD SHX Text

INTERIOR CORNER MOUNT

AutoCAD SHX Text

SECURITY CAMERA

AutoCAD SHX Text

WALL

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

OVERHANG PARAPET MOUNT

AutoCAD SHX Text

ROOF

AutoCAD SHX Text

CAT-6 CONNECTOR

AutoCAD SHX Text NOTES: 1. CORE THRU WALL TO CONNECT THE CONDUIT TO A BACKBOX. CORE THRU WALL TO CONNECT THE CONDUIT TO A BACKBOX. 2. ATTACH THE CAMERA MOUNT TO THE WALL. ATTACH THE CAMERA MOUNT TO THE WALL. 3. PROVIDE A DRIP LOOP ON THE CABLES AS THEY ROUTE FROM THE MOUNT TO THE BACKBOX. PROVIDE A DRIP LOOP ON THE CABLES AS THEY ROUTE FROM THE MOUNT TO THE BACKBOX. 4. ALL CAMERAS AND HARDWARE SHALL BE INSTALLED WITH APPROVED ANCHORS.ALL CAMERAS AND HARDWARE SHALL BE INSTALLED WITH APPROVED ANCHORS.

AutoCAD SHX Text

WEATHERPROOF SURFACE-MOUNT BACKBOX

AutoCAD SHX Text

PARAPET MOUNT

AutoCAD SHX Text

VIDEO & CONTROL & POWER CABLE

AutoCAD SHX Text INSTALL A 3/4" CONDUIT THROUGH THE WALL AT LOCATION…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jul 27, 2026.