462ATTACHMENTA.pdf
PDF 106 KB Posted
- Attached to
- FA821225Q0341 PROGRAMMABLE CARTRIDGE
- Solicitation number
- FA821225Q0341
About this file
This is an Engineering Data Requirements document (Attachment A) specifying manufacturing instructions for an Advanced Data Transfer Cartridge/Long Block for the F-16 aircraft, with part number A3765000000-31 and National Stock Number 7045-01-617-4668WF.
The document outlines specific requirements for Unique Identification (UID) labeling that must be applied according to MIL-STD-130 instead of FPS-3008. The requirements include both human-readable text (minimum 1/8th inch) and machine-readable 2D matrix (minimum 1/4 inch square) containing CAGE code (17V), part number (1P), and serial number (1S). The document specifies that any material substitutions or deviations from control drawing specifications must receive prior approval from the cognizant engineering activity. The document was prepared by Justin Allred of the 416 SCMS/GUMAC office on December 13, 2022.
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ADVANCED DATA TRANSFER CARTRIDGE/LONG BLOCK (F-16)
2. PART NUMBER:
A3765000000-31
3. NATIONAL STOCK NUMBER:
7045-01-617-4668WF
PREPARED BY:
JUSTIN ALLRED
OFFICE SYMBOL:
416 SCMS / GUMAC
DATE:
20221213
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO
INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE
REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING
LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .